M45-46112.4G remote controller

Estes Proto-X SLT User Manual Model: 4611 2 Thank you for purchasing the Estes Proto-X SLT. We are certain you will get many hours of enjoyment out of this model. If you should have any questions or concerns please feel free to contact us at Hobby Services. SAFETY PRECAUTIONS Follow these safety precautions when operating this or any model helicopter. • Adult supervision required. • Changes or modifications to this product not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment. • Do not touch the spinning blades or fly over another person’s head. Keep your face and body as well as all spectators away from the rotors whenever the battery is connected. • Stay clear of buildings, trees and power lines. AVOID flying in or near crowded areas. DO NOT fly close to people, children or pets. • Maintain a safe pilot-to-helicopter distance while flying. • Your Estes Proto-X SLT should not be considered a toy, but rather a small, working model. If not operated correctly, the model could possibly cause injury to you or spectators and damage to property. • Do not alter or modify the model, as doing so may result in an unsafe or unflyable model. • You must check the operation of the model before every flight to ensure that it is structurally sound. 90-DAY LIMITED WARRANTY PLEASE DO NOT RETURN YOUR PRODUCT TO THE STORE Proto-X will repair or replace factory defects for 90 days from the date of purchase. This warranty specifically does not cover crash damage, misuse or abuse. To make a warranty claim, please contact our product support team at 1-217-398-8970 option 6or e-mail us at [email protected] If requested by Product Support, please send your defective product to: Hobby Services 3002 N Apollo Dr., Suite #1 Champaign, IL 61822 Please include a note about the problem, your contact information, and a copy of the receipt. This warranty applies only if the product is operated in compliance with the instructions and warnings provided with each model. Proto-X assumes no liability except for the exclusive remedy or repair of parts as specified above. Proto-X SLT shall not be liable for consequential or incidental damages. Some states do not allow the exclusion of consequential or incidental damages so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. FCC STATEMENT AND INDUSTRY CANADA NOTICE 1. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Remark: This device is in accordance with the digital device grade B limitation and the 15th regulation of FCC. This limitation requires reasonable anti-interference protection around the residence. The device can transmit radio wave during use and can interrupt the mobile communication without proper installment. Interruption will occur for special device. If the device do interrupt the radio or television, please turn the device off then turn it on to adjust. Below are some resolution for your reference: • Move the receiving antenna • Enlarge the distance between the device and receiver • Try to not connect the device and the receiver on the same circuit • Ask for professional help from experts 3. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of Industry Canada. BATTERY PRECAUTIONS This Proto-X SLT Nano Quadcopter uses a lithium polymer (LiPo) battery. Follow these precautions to ensure safe and trouble-free operation. • Only use the included charger with the flight battery. • Do not attempt to use this charger with NiCd or NiMH battery packs. • Do not attempt to use a damaged battery. • This product contains a LiPo battery. Must be recycled or disposed of properly. 3 • Disconnect the battery from the charger and carefully move the battery to a fireproof location if the battery begins to swell or smoke! • Do not leave the charger unattended while charging. Disconnect the battery and unplug the charger immediately if either becomes hot! However, it is normal for the charger to get warm. • Never allow the battery temperature to exceed 140° F [60° C]. • Never disassemble or modify pack wiring in any way or puncture cells. • Do not place the charger or any battery on a flammable surface or near combustible materials while in use. • Never charge inside a vehicle. • Always disconnect the battery and remove the charger from the USB port when not in use. • Do not attempt to charge a battery if it is swollen or hot. • Land your model immediately when the low-battery LEDs flash. Recharge the battery before attempting another flight. A dangerous situation can occur when attempting to recharge an over-discharged battery! • ALWAYS keep a supply of sand handy when charging. Dumping sand on the battery will extinguish a LiPo chemical fire. • ALWAYS KEEP OUT OF REACH OF CHILDREN. CARE AND MAINTENANCE • Always remove the batteries from the controller and the quadcopter when it is not being used for a long period of time. • Clean the quadcopter with a damp cloth. SAFETY CHECK Before operation, please make sure the batteries for the controller and the quadcopter have enough charge for flying. ❑ Carefully check the rotor blades for damage. Broken or premature parts failure may result in a dangerous situation. ❑ Before turning on the controller, please check that the throttle stick is in the lowest position. ❑ Always turn on the controller first, and then connect the battery to the quadcopter to start flying. ❑ A…

Text truncated - open the document above for the full version.

S Estes-Cox Corporation d/b/a Estes Industries and Cox Add: 1295 H Street, Penrose, Colorado 81240 United States Tel: (719) 372-6565 Fax: (719) 372-3217 2014-07-24 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: M45-4611 We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Barry Tunick / President Contact information / address : 1295 H Street, Penrose, Colorado 81240 United States Tel: (719) 372-6565 Fax: (719) 372-3217 E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 4 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 4 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 4 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 4 Fig.7

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 LABEL AND LOCATION Size: L3.0Cm*W1.5cm Material: Tagboard Glue: adhesive sticker Font color: Black Label color: White Label Location Product Name: Estes Proto-X SLT Model No.: 4611 FCC ID: M45-4611

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5 Fig.6 PCB Antenna

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 22 FCC TEST REPORT FOR Estes-Cox Corporation d/b/a Estes Industries and Cox Estes Proto-X SLT Model No.: 4611 Additional Model No.: 4709, 4710, 4711, 4712, 4713 Prepared for : Estes-Cox Corporation d/b/a Estes Industries and Cox Address : 1295 H Street, Penrose, Colorado 81240 United States Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Date of receipt of test sample : July 08, 2014 Number of tested samples : 1 Serial number : Prototype Date of Test : July 08, 2014 - July 22, 2014 Date of Report : July 22, 2014 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 22 FCC TEST REPORT FCC CFR 47 PART 15 C(15.249): 2013 Report Reference No. ............... : LCS1407080234E Date of Issue ................................. : July 22, 2014 Testing Laboratory Name .......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : Estes-Cox Corporation d/b/a Estes Industries and Cox Address ......................................... : 1295 H Street, Penrose, Colorado 81240 United States Test Specification Standard ........................................ : FCC CFR 47 PART 15 C(15.249): 2013 / RSS-210 Issue 8 / RSS-Gen Issue 3 Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ............................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................. : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................ : Estes Proto-X SLT Trade Mark ................................... : Hubsan Model/ Type reference.................. : 4611 Ratings .......................................... : DC 6.0V by 4*AA batteries Result ......................................... : Positive Compiled by: Supervised by: Approved by: Leo Lee/ File administrators Danny Huang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 22 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1407080234E July 22, 2014 Date of issue Type / Model........................... : 4611 EUT......................................... : Estes Proto-X SLT Applicant............................... : Estes-Cox Corporation d/b/a Estes Industries and Cox Address.................................. : 1295 H Street, Penrose, Colorado 81240 United States Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Hubsan Technology Co., Ltd. Address................................... : Rm409, Municipal Service Building, Hong Li Road west, Futian District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Hubsan Technology Co., Ltd. Address................................... : Rm409, Municipal Service Building, Hong Li Road west, Futian District, Shenzhen, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 22 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................... 5 1.1. Description of Device (EUT) ................................................................................................................. 5 1.2. Host System Configuration List and Details .......................................................................................... 5 1.3. External I/O ............................................................................................................................................ 5 1.4. Description of Test Facility .................................................................................................................... 6 1.5. Statement of the measurement uncertainty ............................................................................................ 6 1.6. Measurement Uncertainty ...................................................................................................................... 6 1.7. Description Of Test Modes ......…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: M45-4611 Report No.: LCS1407080234E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 1. TEST SETUP PHOTOGRAPHS 1.1 Photo Of Radiated Emission Measurement(X Position) Fig.1 Fig.2