M5VC30040XBProx Readers T10 Mifare

Unlicensed Transmitters: Approved Antennas List Manufacturer Antenna Description Type Length (mm) Width (mm) Other Info Connector Type Notes UniVenture Technology Ltd 2M8380-X PCB Trace Loop 91.2 25.2 Integral 1 Notes: 1) 1 oz Copper Trace.

Page 1 3E4288 Gallagher T10 Reader | Edition 11 | March 2023 Copyright © Gallagher Group Limited Gallagher T10 Reader Installation Note T10 MIFARE® Reader, Black: C300400 T10 MIFARE® Reader, White: C300401 High Sec T10 Reader, Black: C305400 High Sec T10 Reader, White: C305401 Page 2 3E4288 Gallagher T10 Reader | Edition 11 | March 2023 Copyright © Gallagher Group Limited Disclaimer This document gives certain information about products and/or services provided by Gallagher Group Limited or its related companies (referred to as "Gallagher Group"). The information is indicative only and is subject to change without notice meaning it may be out of date at any given time. Although every commercially reasonable effort has been taken to ensure the quality and accuracy of the information, Gallagher Group makes no representation as to its accuracy or completeness and it should not be relied on as such. To the extent permitted by law, all express or implied, or other representations or warranties in relation to the information are expressly excluded. Neither Gallagher Group nor any of its directors, employees or other representatives shall be responsible for any loss that you may incur, either directly or indirectly, arising from any use or decisions based on the information provided. Except where stated otherwise, the information is subject to copyright owned by Gallagher Group and you may not sell it without permission. Gallagher Group is the owner of all trademarks reproduced in this information. All trademarks which are not the property of Gallagher Group, are acknowledged. Copyright © Gallagher Group Ltd 2023. All rights reserved. Page 3 3E4288 Gallagher T10 Reader ͮ Edition 11 ͮ March 2023 Copyright © Gallagher Group Limited Contents 1 Introduction .....................................................................................................................................4 2 Before you begin ..............................................................................................................................4 3 Distance between readers ...............................................................................................................6 4 Installation .......................................................................................................................................7 5 LED indications .................................................................................................................................9 6 Accessories ......................................................................................................................................9 7 Technical specifications ..................................................................................................................10 8 Approvals and Compliance Standards............................................................................................10 9 Mounting Dimensions ....................................................................................................................12 Page 4 3E4288 Gallagher T10 Reader | Edition 11 | March 2023 Copyright © Gallagher Group Limited 1 Introduction The Gallagher T10 Reader is a smart card proximity reader. It can be installed as either an entry reader or exit reader. The reader sends information to the Gallagher Controller and acts upon information sent from the Gallagher Controller. The reader itself does not make any access decisions. The reader is available in four variants. The supported technologies and compatibility for each variant is shown in the table below. Reader VariantProduct Codes Card Technologies SupportedNFC Access for Android Supported From HBUS Comms Supported From Cardax IV Comms Supported From T10 MIFARE Reader C300400 C300401 ISO 14443A MIFARE® DESFire® EV1/EV2*/EV3**, MIFARE Plus®, and MIFARE Classic® cards vEL7.80 HBUS only vEL7.00vEL1.02 High Sec T10 Reader C305400 C305401 ISO 14443A PIV, PIV-I, CAC, TWIC, MIFARE DESFire EV1/EV2*/EV3**, MIFARE Plus, and MIFARE Classic cards vEL7.80 HBUS only vEL7.10None * MIFARE DESFire EV2 is supported from vEL7.70. ** MIFARE DESFire EV3 is supported from vEL8.30.1458 (or later). 2 Before you begin 2.1 Shipment contents Check the shipment contains the following items: • 1 x Gallagher T10 Reader facia assembly • 1 x Gallagher T10 Reader bezel • 1 x M3 Torx Post Security screw • 2 x 25 mm No.6 self tapping, pan head, Phillips drive fixing screws • 2 x 40 mm No.6 self tapping, pan head, Phillips drive fixing screws 2.2 Power supply The Gallagher T10 Reader is designed to operate over a supply voltage range of 9 - 16 Vdc measured at the terminals. The operating current draw is dependant on the supply voltage at the reader. The power source should be linear or a good quality switched-mode power supply. The performance of the reader may be affected by a low quality, noisy power supply. 2.3 Cabling The Gallagher T10 Reader requires a minimum cable size of 4 core 24 AWG (0.2 mm 2 ) stranded security cable. This cable allows the transmission of data (2 wires) and power (2 wires). When using a single cable to carry both power supply and data, both the power supply voltage drop and data requirements must be considered. Although the reader is specified to operate at 9 Vdc, for good engineering design it is recommended that the voltage at the reader should be approximately 12 Vdc. Page 5 3E4288 Gallagher T10 Reader | Edition 11 | March 2023 Copyright © Gallagher Group Limited HBUS cabling topology The HBUS communications protocol is based on the RS485 standard and allows the reader to communicate over a distance of up to 500 m (1640 ft). The cabling between HBUS devices should be done in a "daisy chain" topology, (i.e. A "T" or "Star" topology should not be used between devices). Should "Star" or "Home-Run" wiring be required, the HBUS 4H/8H Modules and the HBUS Door Module allow multiple HBUS devices to be individually wired to the one physical location. The end device…

Text truncated - open the document above for the full version.

CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: [email protected] APP-FCC-A Page 1 of 2 Rev 2 APP-FCC-A Applicant Attestation Applicant Information Company Name: Gallagher Group Ltd. Contact Name: Tony Smith Contact Title: Technical Development Manager Company Address: 181 Kahikatea Drive, Melville, Hamilton 3206, New Zealand Telephone No: +647 838 9800 Facsimile No: +647 838 9801 Email Address: [email protected] Certification Type / Equipment Identification Certification Program: Radio Certification Certification Number: M5VC30040XB The equipment identified above ☐ is / ☒ is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR Part 2, Subpart J, §2.903. The applicant identified above ☐ is / ☒ is not identified on the FCC’s “Covered List” as an entity, affiliate, or subsidiary which produces equipment on the “Covered List” or identified as an entity which has rebranded or relabeled equipment produced by entities identified on the “Covered List.” I hereby attest and certify that the above statements are true and correct. Signature of Authorized Individual: 1 Printed Name: Menardo Lazaro Title of authorized signature: Technical Leader - Compliance Date 3/29/2023 Note this attestation shall be signed by the applicant or their direct appointee within the same legal entity. A third party agent is not permitted to sign on behalf of the applicant. 1 Signature is not subject to the FCC’s authorized individual policy; (KDB 852134) and may be signed by any appropriate company official. CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: [email protected] APP-FCC-A Page 2 of 2 Rev 2 Attachment A – Additional Information The FCC’s “Covered List” includes certain “telecommunications equipment” and “video surveillance equipment” produced by specific manufacturers, their Affiliates or Subsidiaries and including any products produced by these entities which are rebranded or relabeled by other entities. (191, 184, 185, 188) 2 The FCC claims the identified equipment poses an unacceptable risk to United States national security. Telecommunications Equipment (195) : Any equipment used in fixed or mobile networks that provides advanced communications service, provided the equipment includes or uses electronic components, as defined under section 1.50001(c). Video Surveillance Equipment (205) : Any equipment that is used in fixed and mobile networks that provides advanced communications service in the form of a video surveillance service, provided the equipment includes or uses electronic components. Advanced Communications Service (195, 205) Any equipment that can be used in such a fixed or mobile broadband network to enable users to originate and receive high quality voice, data, graphics, and video telecommunications service using any technology with connection speeds of at least 200 kbps in either direction. Affiliate (183) : An entity that (directly or indirectly) owns or controls, is owned or controlled by, or is under common ownership or control with, another entity, where the term “own” means to have, possess, or otherwise control an equity interest (or the equivalent thereof) of more than 10 percent. Subsidiary (184) : Any entity in which such named entity directly or indirectly (1) holds de facto control or (2) owns or controls more than 50% of the total voting power of the entity’s outstanding voting stock. Useful Links: FCC Covered List https://www.fcc.gov/supplychain/coveredlist 47 CFR Part 2 Subpart J (including 2.903 and 2.911) https://www.ecfr.gov/current/title-47/chapter-I/subchapter-A/part-2/subpart-J FCC KDB System: https://apps.fcc.gov/oetcf/kdb/index.cfm FCC Report and Order 22-84 https://docs.fcc.gov/public/attachments/FCC-22-84A1.pdf 2 Parenthetical references are citations of paragraph numbers in FCC Report and Order FCC 22-84 (ET Docket 21.232).

Attestation For United States Agent for Service of Process CKC CS PUB FCC AFSOP v2 Applicant / Equipment Manufacturer Information Grantee Code: M5V Company Name: Gallagher Group Ltd Applicant Attestation The undersigned hereby consents: a) to the designation of the herein named US Agent for Service of Process; and b) to accept responsibility and obligation to maintain a US Agent for Service of Process for no less than one year after either all marketing and importation of the applicable equipment within the U.S has been permanently terminated, or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later; and c) to promptly update the US Agent for Service of Process information on file with the FCC in accordance with 47 CFR 2.929 in the event any change occurs in either the named entity or the named entity’s contact information. Signature Applicant: Date: Printed Name: Tony Smith US Agent for Service of Process Information FRN: 0033444845 Company Name: Gallagher North America, Inc Contact Name: Blake Smith Contact Title: National Technical Manager Physical Address: 225 Reformation Parkway Suite 200 – Office 10 Canton, GA 30114 USA Mailing Address: Same as above Telephone No: 240-291-8894 Facsimile No: +1 855 846 1395 Email Address: [email protected] Agent for Service of Process Attestation The undersigned US Agent for Service of Process hereby consents a) to acknowledges and accepts responsibility to act as United States Agent for Service of Process on behalf of the applicant identified above; and b) to accept service of process in the US for matters related to the applicable equipment and at the physical address and email address identified herein on behalf of the applicant identified above for equipment authorization applications under certification pursuant to 47 CFR Part 2 Subpart J. Signature Applicant: Anthony B Smith Date: 2/24/2023 Printed Name: Anthony Smith 27 February 2023 FRN: 0005851324

Gallagher Group Ltd 181 Kahikatea Drive Private Bag 3026 Hamilton, New Zealand Tel: +64-7-838-9800 Fax: +64-7-838-9801 Email: [email protected] www.gallaghergroup.co.nz Companies Gallagher Group Ltd – NZ Sunplas Engineering (82) Ltd – NZ Gallagher Security (int) Ltd – NZ Gallagher Power Fence (SA) Pty – Sth Africa Gallagher Security (UK) Ltd – UK Gallagher Security (USA) Inc – USA Franklin Machinery – New Zealand PEC Pumps PEC Fuel Pumps Ltd Cardax (International) Ltd Gallagher Finance & Management Ltd Gallagher IT Solutions Ltd Reach Global Ltd Associate Companies Gallagher Europe Veldman & Djikstra Gallagher Australia Pty Ltd – Australia Gallagher Insultimber – Australia Gallagher Power Fence Inc – USA Gallagher Power Fencing Systems Inc – Canada Gallagher Power Fence (IRL) Ltd – Ireland Ibex Gallagher – India A/S Poda Hegn – Denmark NZ Producciones S.A – Argentina International Scales Pty Ltd - Australia August 12, 2010 To Whom It May Concern: I hereby appoint Menardo Lazaro to sign letters and applications for any filings with regulatory agencies on our behalf, and to receive and exchange data between our company, the agents company and the agency in connection with certification for any products that our company owns or manufactures. Sincerely, Tony Smith Technical Development Manager Gallagher Group Ltd.

GALLAGHER GROUP LIMITED 181 Kahikatea Drive, Hamilton 3206, New Zealand. Private Bag 3026, Hamilton 3240, New Zealand. TEL +64 7 838 9800 FAX +64 7 838 9801 EMAIL [email protected] WEB www.gallagher.com Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 December 2, 2022 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Gallagher Group Ltd requests confidentiality for the following products: FCC ID Number Product Title/Model M5VC30040XB T10 Mifare Readers For the products stated above, we request that the following information be held confidential: 1) Electrical Schematics of the Circuitry 2) Block Diagram 3) Operational Description 4) Internal Photos The T10 Mifare Readers are potted. The potting is used for environmental protection to IP68 and security of the circuit design. This product is used in very high security applications to protect, for example, national infrastructure in many countries, where it is necessary such information is kept as confidential as possible. Removal of the potting material would damage or destroy the product. No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Gallagher Group Ltd trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Readers. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Menardo Lazaro Technical Leader - Compliance

GALLAGHER GROUP LIMITED 181 Kahikatea Drive, Hamilton 3206, New Zealand. Private Bag 3026, Hamilton 3240, New Zealand. TEL +64 7 838 9800 FAX +64 7 838 9801 EMAIL [email protected] WEB www.gallagher.com 3/28/2023 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 RE: Cover Letter To whom it may concern: The FCC test report number 220903.1 for T10 Mifare Reader (Model No.: C300400-) also covers the other models of T10 Mifare (Model No.: C300401-). All these model numbers are to be certified under FCC ID: M5VC30040XB. # Product Characteristics: Products are: Same Different 1 Radio Frequency Operating Range(s) X 2 RF Power / Field Strength X 3 Radio Frequency Circuitry X 4 Antenna Characteristics X 5 Associated Digital Circuitry X 6 Functional Capabilities X 7 Cosmetic Differences X For any differences, a description is provided in the table below. # Description of differences: 7 The model C300400- has black enclosure, while C300401- has white enclosure. Brief statement as to why the products should qualify for family approval: The products all share the same hardware. The radio parameters are identical among all family members. Sincerely, Menardo Lazaro Technical Leader - Compliance Gallagher Group Ltd

25 mm 46.5 mm Material: Thermafilm 21940 UL approved glossy white self-adhesive polyester

____________________________________________________________________________________________________________________________________________________________________________ Page 1 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. EMC Technologies (NZ) Ltd 47 Mackelvie St, Grey Lynn Auckland 1021 New Zealand Phone 09 360 0862 Fax 09 360 0861 E-Mail Address: [email protected] Web Site: www.emctech.co.nz TEST REPORT Gallagher C300400-T10 Mifare Proximity Card Reader tested to the 47 Code of Federal Regulations Part 15 - Radio Frequency Devices Subpart C – Intentional Radiators Section 15.225 Operation within the band 13.110 -14.010 MHz for Gallagher Group Ltd This test report is issued with the authority of: ______________________________ Andrew Cutler - General Manager ____________________________________________________________________________________________________________________________________________________________________________ Page 2 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. Table of Contents 1. STATEMENT OF COMPLIANCE 3 2. RESULTS SUMMARY 3 3. INTRODUCTION 4 4. CLIENT INFORMATION 4 5. DESCRIPTION OF TEST SAMPLE 5 6. SETUPS AND PROCEDURES 7 7. TEST EQUIPMENT USED 27 8. ACCREDITATIONS 27 9. PHOTOGRAPHS 28 ____________________________________________________________________________________________________________________________________________________________________________ Page 3 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. 1. STATEMENT OF COMPLIANCE The Gallagher C300400-T10 Mifare Proximity Card Reader complies with FCC Part 15 Subpart C Section 15.225 as an Intentional Radiator when the methods as described in ANSI C63.10 - 2013 are applied. 2. RESULTS SUMMARY The results from testing carried out in between the 14 th November 2022 and 23 rd November 2022 are detailed in the following table: Clause Parameter Result 15.201 Equipment authorisation requirement Certification required. 15.203 Antenna requirement Complies. Antenna internal to the device. 15.204 External PA and antenna modifications Not applicable. No external devices. 15.205 Restricted bands of operation Complies. Device transmits on 13.560 MHz. 15.207 Conducted limits Complies. 15.209 Radiated emission limits - Emissions < 30 MHz Complies. 15.209 Radiated emission limits – Emissions > 30 MHz Complies. 15.225 Radiated emission limits - Fundamental Complies. 15.225 Frequency stability Complies. ____________________________________________________________________________________________________________________________________________________________________________ Page 4 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. 3. INTRODUCTION This report describes the tests and measurements performed for the purpose of determining compliance with the specification. The client selected the test sample. This report relates only to the sample tested. This report contains no erasures This report contains no corrections. Measurement uncertainties with statistical confidence intervals of 95% are shown below test results. Both Class A and Class B uncertainties have been accounted for, as well as influence uncertainties where appropriate. All compliance statements have been made with respect of the specification limit with no reference to the measurement uncertainty. All testing was carried out as per the standard in the worst-case configuration with no deviations being applied. 4. CLIENT INFORMATION Company Name Gallagher Group Ltd Address 181 Kahikatea Drive Melville City Hamilton 3206 Country New Zealand Contact Menardo Lazaro ____________________________________________________________________________________________________________________________________________________________________________ Page 5 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. 5. DESCRIPTION OF TEST SAMPLE Brand Name Gallagher Model Number C300400-T10 Mifare Product Proximity Card Reader Manufacturer Gallagher Group Ltd Country of Origin New Zealand Serial Number 2243405032 FCC ID M5VC30040XB IC ID 7369A-C30020XB Antenna Internal to product Highest oscillator frequency 27.12 MHz Bluetooth facility Not Available in the product Operating frequency 13.56 MHz NFC Product Description: The device tested is a RFID card reader that operates on 13.560 MHz that would typically be used to allow security access to buldings and locations. The product under test is powered at 13.6 Vdc which was supplied using a Gallagher 6000 HS controller that was in turn powered from a 120 Vac to 13.6 Vdc representative power supply. The controller inturn was powered from a AC to DC convertor pictured in figure-3. ____________________________________________________________________________________________________________________________________________________________________________ Page 6 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. For radiated emissions test, a long length (>10 m) orange HBUS cable was used to route DC and control signals from FT controller to the EUT, to facilitate increased physical distancing between the EUT and ancillaries. The connections to the product from ancillaries have been represented in figure-1, 2 & 3. When installed in the user locations the Device under test (DUT) would be typically powered by a 13.6 Vdc PSU. Figure-1: Block Diagram of product with Ancillaries Figure-2: Gallagher supplied controller (Ancillary) Gallagher controller 6000 (HS) has been supplied by the client to assist in the testing of DUT. RS485 port connects this controller to the DUT The controller gets powered at 13.6 Vdc using client supplied AC to DC convertor (as shown in figure 3. ___________________________________________________________________________…

Text truncated - open the document above for the full version.

____________________________________________________________________________________________________________________________________________________________________________ Page 32 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. Conducted emissions test set up ____________________________________________________________________________________________________________________________________________________________________________ Page 33 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. Ancillary Equipment placed outside of the test area during radiated emissions testing Radiated emission test set up ____________________________________________________________________________________________________________________________________________________________________________ Page 34 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. Radiated emission test set up ____________________________________________________________________________________________________________________________________________________________________________ Page 35 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. Test Antennas Used - Biconical Antenna ____________________________________________________________________________________________________________________________________________________________________________ Page 36 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. Log periodic Antenna ____________________________________________________________________________________________________________________________________________________________________________ Page 37 of 37 Test Report No 220903.1 22 nd December 2022 This report may not be reproduced except in full. Loop Antenna