M9HCOSY2GCOSY Phone 2G

English COSY Phone 2 You have just purchased a SAGEM WIRELESS phone, we congratulate you; it is recommended that you read this handbook carefully in order to use your phone efficiently and in the best conditions. Your phone can be used internationally in the various networks (Either COSY Phone 2G: GSM 850/900/1800/1900MHz, EDGE 850/900/1800/1900MHz, either COSY Phone 3G: GSM 850/900/1800/1900MHz, EDGE 850/900/1800/1900MHz, UMTS/HSDPA) depending on the roaming arrangements with your operator. This phone is approved to meet European standards. WARNING Depending on the model, network configuration and associated subscription cards, certain functions may not be available. T9® Text Input is a trademark of ©Tegic Communications Inc. Java™ and all Java™ based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. The WAP browser and the softwares included are the exclusive property of Openwave. For this reason, it is forbidden to modify, translate, disassemble or even decompile all or part of these softwares. The Bluetooth ® word mark and logos are owned by the Bluetooth ® SIG, Inc. Bluetooth ® QDID (Qualified Design ID): B016837. microSD™ is a trademark of SD Card Association. 3 Contents Description ....................................................................6 Idle screen.....................................................................9 Quick start ...................................................................11 Information on the SIM card................................................. 11 Installing the SIM card and the battery............................... 12 Charging the battery ............................................................ 13 Improving antenna performance........................................ 15 Increase the battery life of your phone .............................. 15 Inserting the memory card ................................................... 16 Removing the memory card ................................................ 16 Getting started....................................................................... 16 Switching ON/OFF.................................................................. 17 Network................................................................................... 17 Calls .............................................................................19 Calling ..................................................................................... 19 Receiving a call ..................................................................... 19 Call history............................................................................... 20 Call Settings ............................................................................ 20 Messaging ...................................................................24 Creating a text message ...................................................... 24 Receiving messages .............................................................. 26 Messaging menu ................................................................... 27 Contacts ......................................................................30 Using the contacts ................................................................. 30 Storing a new contact .......................................................... 30 Contact options ..................................................................... 30 Camera........................................................................34 Taking a photo ....................................................................... 34 Recording a video................................................................. 35 4 Music player................................................................37 Recently played..................................................................... 37 Music ....................................................................................... 37 More sounds ........................................................................... 38 FM Radio ......................................................................39 Multimedia ..................................................................41 Applications ................................................................42 NFC .......................................................................................... 42 ToDo ........................................................................................ 45 Clock ....................................................................................... 46 Sync. ........................................................................................ 46 Calculator............................................................................... 47 Torch........................................................................................ 47 Local info. ............................................................................... 47 Services ................................................................................... 47 Recorder ................................................................................. 47 Calendar................................................................................. 48 Help ......................................................................................... 49 Entertainment ..............................................................50 Games..................................................................................... 50 Applications............................................................................ 50 Running Applications ............................................................ 50 Settings .................................................................................... 51 Browser ........................................................................52 Logging on ............................................................................. 53 Do…

Text truncated - open the document above for the full version.

Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 22 of 43 An ne x B Ex te rna l P ho to gra phs o f the E UT Photo documentation: Photo 1: Photo 2: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 23 of 43 Photo 3: Photo 4: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 24 of 43 Photo 5: Photo 6: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 25 of 43 Photo 7: Photo 8: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 26 of 43 Photo 9: Photo 10:

General Tolerances & /A ou B; ; ; Sizes : 0,1mm 287310902 CHEN YUAN 10-04-13 4 000 029 524 R46 000 01 1 / 1 MAO LINGZHI - A A B COSY IMEI LABEL A01 10-04-13 SCALE 1:1 a1) 22x3.5mm a2) 13x1mm c) 11x1mm e) 10x1mm f) 10x1mm d) 19x1mm b) 7x1mm g) 6.3x2.2mm REMARK: a1): IMEI bar code a2): IMEI code b): Product package code c): Product marketing name d): FCC ID number e): Date code+production level For example: 10W14-4-N1 f): Made in xxx g): Identified number of the notify body for CE logo : 5.5 x 7.8 mm 7 x 5 mm : CE marking 1. The CE marking shall consist of the initials ‘CE’ taking the following form: 2. If the CE marking is reduced or enlarged, the proportions given in the graduated drawing in paragraph 1 shall be respected. 3. Where specific legislation does not impose specific dimensions, the CE marking shall be at least 5 mm high. 38 25.3 26.5 20.5 SAMPLE: 

Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 28 of 43 Photo 13: Photo 14: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 29 of 43 Photo 15: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 30 of 43 An ne x C Inte r na l Ph o tog ra phs o f the E UT Photo documentation: Photo 1: Photo 2: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 31 of 43 Photo 3: Photo 4: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 32 of 43 Photo 5: Photo 6: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 33 of 43 Photo 7: Photo 8: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 34 of 43 Photo 9: Photo 10: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 35 of 43 Photo 11: Photo 12: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 36 of 43 Photo 13: Photo 14: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 37 of 43 Photo 15: Photo 16: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 38 of 43 Photo 17: Photo 18: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 39 of 43 Photo 19: Photo 20: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 40 of 43 Photo 21: Photo 22: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 41 of 43 Photo 23: Photo 24: Annex to Test Report No.: 1-2403-01-07/10-A 2010-08-04 Page 42 of 43 Photo 25: Photo 26:

2010-08-03 Page 1 of 60 TEST REPORT Test Report No.: 1-2403-01-12/10-A Testing Laboratory Applicant CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom-ict.de e-mail: [email protected] Accredited Test Laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DGA-PL-176/94-D1 Sagem Wireless 2 rue du Petit Albi 95801 Cergy Pontoise Cedex/France Phone: +33-(0)1-58-11-91-0 Contact: Xinni Yang e-mail: [email protected] Phone: +86 574 27960929 Fax: +86 574 27960000 Manufacturer Sagem Wireless 2 rue du Petit Albi 95801 Cergy Pontoise Cedex/France Test Standard/s IEEE 1528-2003 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques OET Bulletin 65 Supplement C Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields RSS-102 Issue 4 Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: GSM Mobile Phone Device type: portable device Model name: Cosy 2G S/N serial number: FFCSTR300340 FCC-ID: M9HCOSY2G IC: N/A IMEI-Number: 352330040006954 Hardware status: V0x Software status: EA,R05 Frequency: see technical details Antenna: integrated antenna Battery option: Li-ion battery ABD463450LA BD-L4C 900mAh Accessories: Stereo headset 179140488 Test sample status: identical prototype Exposure category: general population / uncontrolled environment This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test performed: Test Report authorised: 2010-07-02 Oleksandr Hnatovskiy 2010-08-03 Thomas Vogler Test report no.: 1-2403-01-12/10-A 2010-08-03 Page 2 of 60 1 Table of contents 1 Table of contents.......................................................................................................................................2 2 General information ..................................................................................................................................3 2.1 Notes................................................................................................................................................3 2.2 Application details .........................................................................................................................3 2.3 Statement of compliance ...............................................................................................................3 2.4 Technical details.............................................................................................................................4 3 Test standard/s:.........................................................................................................................................5 3.1 RF exposure limits .........................................................................................................................5 4 Summary of Measurement Results .........................................................................................................6 5 Test Environment ......................................................................................................................................6 6 Test Set-up .................................................................................................................................................7 6.1 Measurement system .....................................................................................................................7 6.1.1 System Description................................................................................................................7 6.1.2 Test environment ...................................................................................................................8 6.1.3 Probe description...................................................................................................................8 6.1.4 Phantom description..............................................................................................................9 6.1.5 Device holder description ......................................................................................................9 6.1.6 Scanning procedure ............................................................................................................10 6.1.7 Spatial Peak SAR Evaluation ..............................................................................................11 6.1.8 Data Storage and Evaluation...............................................................................................12 6.1.9 Tissue simulating liquids: dielectric properties ....................................................................14 6.1.10 Tissue simulating liquids: parameters .................................................................................15 6.1.11 Measurement uncertainty evaluation for SAR test ..............................................................16 6.1.12 Measurement uncertainty evaluation for system validation ................................................17 6.1.13 System validation ................................................................................................................18 6.1.14 Validation procedure............................................................................................................19 7 Detailed Test Results ..............................................................................................................................20 7.1 Conducted power measurements............................................…

Text truncated - open the document above for the full version.

2010-07-02 Page 1 of 38 TEST REPORT Test Report No.: 1-2403-01-12/10-A Testing Laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom-ict.de e-mail: [email protected] Accredited Test Laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DAT-P-176/94-D1 Appendix with Calibration data, Phantom certificate and system validation information 2010-07-02 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 2 of 38 1 Table of contents 1 Table of contents.......................................................................................................................................2 2 Calibration report “Probe ET3DV6”.........................................................................................................3 3 Calibration report “900 MHz System validation dipole”......................................................................12 4 Calibration report “1900 MHz System validation dipole”....................................................................21 5 Calibration certificate of Data Acquisition Unit (DAE) ........................................................................31 6 Certificate of “SAM Twin Phantom V4.0/V4.0C’’ .................................................................................32 7 Application Note System Performance Check .....................................................................................33 7.1 Purpose of system performance check .....................................................................................33 7.2 System Performance check procedure......................................................................................33 7.3 Uncertainty Budget ......................................................................................................................34 7.4 Power set-up for validation .........................................................................................................37 7.5 Laboratory reflection ...................................................................................................................38 7.6 Additional system checks...........................................................................................................38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 3 of 38 2 Calibration report “Probe ET3DV6” Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 4 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 5 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 6 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 7 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 8 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 9 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 10 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 11 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 12 of 38 3 Calibration report “900 MHz System validation dipole” Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 13 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 14 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 15 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 16 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 17 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 18 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 19 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 20 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 21 of 38 4 Calibration report “1900 MHz System validation dipole” Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 22 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 23 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 24 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 25 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 26 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 27 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 28 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 29 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 30 of 38 Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 31 of 38 5 Calibration certificate of Data Acquisition Unit (DAE) Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 32 of 38 6 Certificate of “SAM Twin Phantom V4.0/V4.0C’’ Test report no.: 1-2403-01-12/10-A 2010-07-02 Page 33 of 38 7 Application Note System Performance Check 7.1 Purpose of system performance check The system performance check verifies that the system operates within its specifications. System and operator errors can be detected and corrected. It is recommended that the system performance check is performed prior to any usage of the system in order to guarantee reproducible results. The measurement of the Specific Absorption Rate (SAR) is a complicated task and the result depends on the proper functioning of many components and the correct settings of many parameters. Faulty results due to drift, failures or incorrect parameters might not be recognized, since they often look similar in distribution to the correct ones. The Dosimetric Assessment System DASY4 incorporates a system performance check procedure to test the proper functioning of the system. The system performance check uses normal SAR measurements in a simplified setup (the flat section of the SAM Twin Phantom) with a well characterized source (a matched dipole at a specified distance). This setup was selected to give a high sensitivity to all parameters that might fail or vary over time (e.g., probe, liquid parameters, and software settings) and a low sensitivity to external effects inherent in the system (e.g., positioning uncertainty of the device holder). The system performance check does not replace the calibration of the components. The accuracy of the system performance check is not sufficient for calibration purposes. It is…

Text truncated - open the document above for the full version.

2010-08-31 Page 1 of 76 TEST REPORT Test Report No.: 1-2403-01-07/10-C Testing Laboratory Applicant CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom-ict.de e-mail: [email protected] Accredited Test Laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DGA-PL-176/94-D1 Area of Testing: Radio Satellite Communications Sagem Wireless 2 rue du Petit Albi 95801 Cergy Pontoise Cedex France Contact: Xinni Yang e-mail: [email protected] Phone: +86 574 27960929 Fax: +86 574 27960000 Manufacturer Sagem Wireless 2 rue du Petit Albi 95801 Cergy Pontoise Cedex France Test Standard/s 47 CFR Part 2 Title 47 of the Code of Federal Regulations; Chapter I-Federal Communications Commission Frequency allocations and radio treaty matters; general rules and regulations 47 CFR Part 22 Title 47 of the Code of Federal Regulations; Chapter I-Federal Communications Commission subchapter B - common carrier services, Part 22-Public mobile services 47 CFR Part 24 Title 47 of the Code of Federal Regulations; Chapter I-Federal Communications Commission subchapter B - common carrier services, Part 24-Personal communications services For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: GSM Mobile Phone Model name: COSY Phone 2G FCC ID: M9HCOSY2G IC: N/A Frequency [MHz]: 1850.2 – 1909.8 MHz and 824.2 – 848.8 MHz Power supply: 3.9V DC by power supply / battery + charger Temperature range: -30 °C to +60 °C Test performed: Test Report authorised: 2010-08-31 Marco Bertolino 2010-08-31 Stefan Bös Test report no.: 1-2403-01-07/10-C 2010-08-31 Page 2 of 76 1 Table of contents 1 Table of contents............................................................................................................................................2 2 General Information .......................................................................................................................................3 2.1 Notes.....................................................................................................................................................3 2.2 Application details...............................................................................................................................3 3 Test standard/s ...............................................................................................................................................3 4 Test Environment ...........................................................................................................................................3 5 Test item ..........................................................................................................................................................4 6 Test Laboratories sub-contracted ................................................................................................................4 7 Summary of Measurement Results ..............................................................................................................5 7.1 GSM 850................................................................................................................................................5 7.2 PCS 1900 ..............................................................................................................................................5 7.3 Receiver................................................................................................................................................6 8 RF measurement testing................................................................................................................................7 8.1 Description of test set-up ...................................................................................................................7 8.1.1 Radiated measurements.............................................................................................................7 8.1.2 Conducted measurements..........................................................................................................8 8.2 Results GSM 850 .................................................................................................................................9 8.2.1 RF Output Power ........................................................................................................................9 8.2.2 Frequency Stability ...................................................................................................................11 8.2.3 Spurious Emissions Radiated...................................................................................................14 8.2.4 Spurious Emissions Conducted................................................................................................23 8.2.5 Block Edge Compliance............................................................................................................27 8.2.6 Occupied Bandwidth.................................................................................................................30 8.3 Results PCS 1900 ..............................................................................................................................38 8.3.1 RF Output Power ......................................................................................................................38 8.3.2 Frequency Stability ...................................................................................................................40 8.3.3 Spurious Emissions Radiated...................................................................................................43 8.3.4 Spurious Emissions Conducted................................................................................................52 8.3.5 Block Edge Compliance..…

Text truncated - open the document above for the full version.

2010-06-30 Page 1 of 41 TEST REPORT Test Report No.: 1-2403-01-16/10 Testing Laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom-ict.de e-mail: [email protected] Accredited Test Laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DAT-P-176/94-D1 Appendix with calibration data and system validation information 2010-06-30 Test report no.: 1-2403-01-16/10 2010-06-30 Page 2 of 41 1 Table of contents 1 Table of contents.......................................................................................................................................2 2 Calibration report “Probe ER3DV6” ........................................................................................................3 3 Calibration report “Probe H3DV6”.........................................................................................................13 4 Calibration report “1880 MHz HAC System validation dipole”...........................................................23 5 Calibration report “835 MHz HAC System validation dipole”.............................................................32 6 Calibration certificate of Data Acquisition Unit (DAE) ........................................................................38 7 SPEAG application note : determination of PMF .................................................................................39 Test report no.: 1-2403-01-16/10 2010-06-30 Page 3 of 41 2 Calibration report “Probe ER3DV6” Test report no.: 1-2403-01-16/10 2010-06-30 Page 4 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 5 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 6 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 7 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 8 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 9 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 10 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 11 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 12 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 13 of 41 3 Calibration report “Probe H3DV6” Test report no.: 1-2403-01-16/10 2010-06-30 Page 14 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 15 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 16 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 17 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 18 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 19 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 20 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 21 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 22 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 23 of 41 4 Calibration report “1880 MHz HAC System validation dipole” Test report no.: 1-2403-01-16/10 2010-06-30 Page 24 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 25 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 26 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 27 of 41 Test report no.: 1-2403-01-16/10 2010-06-30 Page 28 of 41 Test report no.: 1-2403-01-16/1…

Text truncated - open the document above for the full version.