MBH-CLTJXX2.4GHz CORDLESS PHONE

FEDERAL COMMUNICATIONS COMMISSION Laboratory Division 7435 Oakland Mills Road Columbia, MD 21046 June 09, 2004 Compliance Certification Services 561F Monterey Road Morgan Hill, CA 95037 Attention:Mike Kuo Re: Application Received: 7/8/2003 Equipment Class: PCE-PCS Licensed Transmitter held to ear Applicant Name: Hyundai Curitel Inc. FCC ID: PP4TX-95C TCB Name: Compliance Certification Services 731 Confirmation Number: TC437939 Gentlemen: The application for the above equipment is hereby DISMISSED pursuant to Section 2.917(a) of the Rules for the following reasons. Request by TCB in 7 May 2004 in correspondence 11432. If you elect to refile for equipment authorization you must submit a currently dated and originally signed Form 731, accompanied by all data required by the Rule sections applicable to the equipment. The deficiencies listed above must be corrected before refiling. Do not refile the application with the same deficiencies or we may DENY the application pursuant to 2.919. You cannot reuse the FCC ID number on denied applications as you can with dismissed applications. You are cautioned that marketing and importation of equipment in the United States bearing the referenced FCC Identifier is prohibited by Section 2.803 of the Rules. Violation of this regulation may subject you to the penalties provided in Sections 501 and 502 of the Communications Act of 1934, as amended. Sincerely, Martin Perrine Electronics Engineer FEDERAL COMMUNICATIONS COMMISSION Laboratory Division 7435 Oakland Mills Road Columbia, MD 21046 June 09, 2004 Hyundai Curitel Inc. San 136-1, Ami-Ri, Bubal-Eub, Ichon-Si, Kyoungki-Do 467-701 South Korea Attention:Hong-Ki Kim Re: Application Received: 7/8/2003 Equipment Class: PCE-PCS Licensed Transmitter held to ear Applicant Name: Hyundai Curitel Inc. FCC ID: PP4TX-95C TCB Name: Compliance Certification Services 731 Confirmation Number: TC437939 Gentlemen: The application for the above equipment is hereby DISMISSED pursuant to Section 2.917(a) of the Rules for the following reasons. Request by TCB in 7 May 2004 in correspondence 11432. If you elect to refile for equipment authorization you must submit a currently dated and originally signed Form 731, accompanied by all data required by the Rule sections applicable to the equipment. The deficiencies listed above must be corrected before refiling. Do not refile the application with the same deficiencies or we may DENY the application pursuant to 2.919. You cannot reuse the FCC ID number on denied applications as you can with dismissed applications. You are cautioned that marketing and importation of equipment in the United States bearing the referenced FCC Identifier is prohibited by Section 2.803 of the Rules. Violation of this regulation may subject you to the penalties provided in Sections 501 and 502 of the Communications Act of 1934, as amended. Sincerely, Martin Perrine Electronics Engineer

To:Steve Behm [email protected] From:Tim Harrington [email protected] FCC Equipment Authorization Branch Re:FCC ID:MIVGSM0108 Applicant:Enfora L.P. Correspondence Number:12548 731 Confirmation Number:TC840942 Date of Original E-Mail:06/09/2004 Subject:audit TCB to address: 1) Please describe and/or demonstrate compliance with 24.232(b) 2W EIRP. 2) Please revise grant note to indicate that antenna gain and cable loss must meet not only the 3W ERP 2.1091 categ. excl. but also 2W EIRP for 24.232(b). 3) Please explain or revise grant power of 2 W for Part 24 - test report, user manual, etc seem to indicate 1 W or less. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal pursuant to Section 2.917(c). DO NOT Reply to this email by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov, E-Filing, OET TCB/Accreditor Electronic Filing, TCB Login, Submit Correspondence. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. To:Scott Constien [email protected] From:Tim Harrington [email protected] FCC Equipment Authorization Branch Re:FCC ID:MIVGSM0108 Applicant:Enfora L.P. Correspondence Number:12549 731 Confirmation Number:TC840942 Date of Original E-Mail:06/09/2004 Subject:audit TCB to address: 1) Please describe and/or demonstrate compliance with 24.232(b) 2W EIRP. 2) Please revise grant note to indicate that antenna gain and cable loss must meet not only the 3W ERP 2.1091 categ. excl. but also 2W EIRP for 24.232(b). 3) Please explain or revise grant power of 2 W for Part 24 - test report, user manual, etc seem to indicate 1 W or less. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal pursuant to Section 2.917(c). DO NOT Reply to this email by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov, E-Filing, OET TCB/Accreditor Electronic Filing, TCB Login, Submit Correspondence. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

To: Jaap Schuurmans, TNO Electronic Products & Services (EPS) B.V. [email protected] From: Steven Dayhoff [email protected] FCC Equipment Authorization Branch Applicant: Conexant Systems B.V. FCC ID: RGS39200MB Correspondence Reference Number:26949 731 Confirmation Number:EA132650 Date of Original E-Mail:6/9/2004 Subject: Info Request FCC Report and Order (FCC 03-287) adds new technical requirements for the new 5.47 - 5.75 GHz UNII band. Please submit data and explanations of how the device complies with the DFS and TPC requirements. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 60 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee pursuant to Section 1.1108 DO NOT Reply to this email by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov, E-Filing, OET Equipment Authorization Electronic Filing, Submit Correspondence, Select Correspondence pertaining to EAS (Equipment Authorization System). Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

To: Date:6/9/2004 08:51:38 Steven Dayhoff Message: Ready for Grant Subject: FCC Equipment Authorization System

To:Randy Ortanez [email protected] From:Tim Harrington [email protected] FCC Equipment Authorization Branch Re:FCC ID:ACJ9TGCF-294 Applicant:Matsushita Electric Industrial Co Ltd Correspondence Number:12557 731 Confirmation Number:TC347796 Date of Original E-Mail:06/09/2004 Subject:audit Block Diagram is marked confidential, but cover letter does not request this - please revise cover letter. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal pursuant to Section 2.917(c). DO NOT Reply to this email by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov, E-Filing, OET TCB/Accreditor Electronic Filing, TCB Login, Submit Correspondence. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

To:Dieter Griep [email protected] From:Tim Harrington [email protected] FCC Equipment Authorization Branch Re:FCC ID:O9EQ2426-SK Applicant:Wavecom SA Correspondence Number:12554 731 Confirmation Number:TC510941 Date of Original E-Mail:06/09/2004 Subject:audit2 Please revise grant note about portion about "Modular device." For example could use similar to For evaluation and developmental use only - this device may not be sold for general public and consumer applications. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal pursuant to Section 2.917(c). DO NOT Reply to this email by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov, E-Filing, OET TCB/Accreditor Electronic Filing, TCB Login, Submit Correspondence. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

FEDERAL COMMUNICATIONS COMMISSION Laboratory Division 7435 Oakland Mills Road Columbia, MD 21046 June 09, 2004 Compliance Certification Services 561F Monterey Road Morgan Hill, CA 95037 Attention:Mike Kuo Re: Application Received: 3/24/2004 Equipment Class: JBP-Part 15 Class B Computing Device Peripheral Applicant Name: ImageQuest Co Ltd FCC ID: PJIET1947L TCB Name: Compliance Certification Services 731 Confirmation Number: TC652535 Gentlemen: The application for the above equipment is hereby DISMISSED pursuant to Section 2.917(a) of the Rules for the following reasons. Request by TCB in 26 May 2004 in correspondence 12096. If you elect to refile for equipment authorization you must submit a currently dated and originally signed Form 731, accompanied by all data required by the Rule sections applicable to the equipment. The deficiencies listed above must be corrected before refiling. Do not refile the application with the same deficiencies or we may DENY the application pursuant to 2.919. You cannot reuse the FCC ID number on denied applications as you can with dismissed applications. You are cautioned that marketing and importation of equipment in the United States bearing the referenced FCC Identifier is prohibited by Section 2.803 of the Rules. Violation of this regulation may subject you to the penalties provided in Sections 501 and 502 of the Communications Act of 1934, as amended. Sincerely, Martin Perrine Electronics Engineer FEDERAL COMMUNICATIONS COMMISSION Laboratory Division 7435 Oakland Mills Road Columbia, MD 21046 June 09, 2004 ImageQuest Co Ltd San 136-1, Ami-Ri, Bubal-eub Ichon-si, Kyungki-Do South Korea Attention:Sang Ryu Re: Application Received: 3/24/2004 Equipment Class: JBP-Part 15 Class B Computing Device Peripheral Applicant Name: ImageQuest Co Ltd FCC ID: PJIET1947L TCB Name: Compliance Certification Services 731 Confirmation Number: TC652535 Gentlemen: The application for the above equipment is hereby DISMISSED pursuant to Section 2.917(a) of the Rules for the following reasons. Request by TCB in 26 May 2004 in correspondence 12096. If you elect to refile for equipment authorization you must submit a currently dated and originally signed Form 731, accompanied by all data required by the Rule sections applicable to the equipment. The deficiencies listed above must be corrected before refiling. Do not refile the application with the same deficiencies or we may DENY the application pursuant to 2.919. You cannot reuse the FCC ID number on denied applications as you can with dismissed applications. You are cautioned that marketing and importation of equipment in the United States bearing the referenced FCC Identifier is prohibited by Section 2.803 of the Rules. Violation of this regulation may subject you to the penalties provided in Sections 501 and 502 of the Communications Act of 1934, as amended. Sincerely, Martin Perrine Electronics Engineer