MOZB4P2A2ARKE Transmitter

Date: April 15, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: MOZB4P2A2A Tokai Rika Co Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Tokai Rika Co Ltd (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. Tokai Rika Co Ltd (“the applicant”) certifies that the RF device is not a router “produced in a foreign country”. Tokai Rika Co Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Tomoki Kuwabara Tokai Rika Co Ltd

47200 Port Street, Plymouth, Michigan 48170, U.S.A. TRAM Group Companies TRMI, Inc. - Battle Creek, Michigan, U.S.A. TAC Manufacturing, Inc. - Jackson, Michigan, U.S.A. TRQSS, Inc. - Tecumseh, Ontario, Canada Tokai Rika Mexico, S.A. DE C.V. - Salinas Victoria, Nuevo Leon, Mexico Date: March 2, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: MOZB4P2A2A Grantee FRN: 0036358612 To whom it may concern: This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Tokai Rika Co Ltd process as outlined in the FCC section §2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. FCC US Agent Contact Person: Daniel Strait Company Name: TRAM, Inc. FRN: 0018143131 Company Address: 47200 Port Street Plymouth Michigan 48170 United States Email: [email protected] Sincerely yours, Daniel Strait Director TRAM, Inc. 03/02/2026

Date: February 26, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: MOZB4P2A2A Grantee FRN: 0036358612 Tokai Rika Co Ltd (“t he applicant”) as required by section §2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Contact Person: Daniel Strait Company Name: TRAM, Inc. FRN: 0018143131 Company Address: 47200 Port Street Plymouth Michigan 48170 United States Email: [email protected] Sincerely yours, Tomoki Kuwabara Tokai Rika Co Ltd

Authorization Letter February 26, 2026 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID: MOZB4P2A2A Applicant: Tokai Rika Co Ltd To whom it may concern: We, the undersigned, hereby authorize Akiko Nishimura of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely, ______________________________ Tomoki Kuwabara Tokai Rika Co Ltd

Request for Long-Term Confidentiality February 26, 2026 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID: MOZB4P2A2A Applicant: Tokai Rika Co Ltd To whom it may concern: Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459: Block Diagram Operational Description Schematics Parts List The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the marketplace. Thank you for your attention to this matter. Sincerely, ______________________________ Tomoki Kuwabara Tokai Rika Co Ltd

Request for Short-Term Confidentiality February 26, 2026 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID: MOZB4P2A2A Applicant: Tokai Rika Co Ltd To whom it may concern: Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization based on the FCC rules 0.457 and 0.459: External Photos Internal Photos Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the marketplace. Thank you for your attention to this matter. Sincerely, ______________________________ Tomoki Kuwabara Tokai Rika Co Ltd

RKE Transmitter Model B4P2A2A FCCID:MOZB4P2A2A Label Drawing SCALE: FREE NOTE: The layout of approval number(s) etc. may be changed. The cover can be easily opened by users. The label will be either internal or external . The FCC ID Certification number is affixed inside the equipment. You can find the ID/number when replacing the battery. The product label is permanently affixed and designed to remain legible for the full lifetime of the product. It will not peel off, fade, or deteriorate under normal operating conditions, ensuring continuous compliance with FCC labeling requirements. -end- TOKAI RIKA FCC ID:MOZB4P2A2A Model：B4P2A2A 4 Point Marking location

UL Japan, Inc. Ise EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: japan.ul.com April 14, 2026 FCC ID: MOZB4P2A2A To whom it may concern, We, UL Japan, Inc, hereby declare that RKE Transmitter, model: B4P2A2A (FCC ID: MOZB4P2A2A) of Tokai Rika Co Ltd is exempt from RF exposure SAR evaluation as its output power meets the exclusion limits stated in KDB 447498D01(v06). KDB 447498D01(v06) has the following exclusion for portable devices: The 1g and 10g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ꞏ[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz •Power and distance are rounded to the nearest mW and mm before calculation •The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. This device has f = 0.43392 GHz and distance = 5 mm (minimum separation distance: 5 mm was used in the calculation) and the maximum average output power (Burst power average) was 1 mW. So for this device: 1 mW[maximum average output power]/5 mm[minimum separation distance]*√0.43392 = 0.1 (This value was calculated as a reference since maximum average output power was less than 1 mW.) *This is less than 3.0, so no SAR is required. Even taking into account the tolerance, this device can be satisfied with the limits. Thank you for your attention to this matter. Akihiko Maeda Leader

Justification for Antenna Gain Info February 26, 2026 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID: MOZB4P2A2A Applicant: Tokai Rika Co Ltd To whom it may concern: Since this device is complied with FCC limits for fundamental and spurious emissions only by radiated measurements, antenna test report is not submitted in this application. Sincerely, ______________________________ Tomoki Kuwabara Tokai Rika Co Ltd

Test Report No. 16196710H Page 1 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No. 16196710H Customer Tokai Rika Co Ltd Description of EUT RKE Transmitter Model Number of EUT B4P2A2A FCC ID MOZB4P2A2A Test Regulation FCC Part 15 Subpart C Test Result Complied Issue Date April 14, 2026 Remarks - Representative test engineer Approved by Junki Nagatomi Engineer Akihiko Maeda Leader CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 26.0 Test Report No. 16196710H Page 2 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Revision Test Report No. Date Page Revised Contents - (Original) 16196710H April 14, 2026 -  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above re gulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body.  This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable)  The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided b y the customer for this report is identified in SECTION 1.  The laboratory is not responsible for information provided by the customer which can impact the validit y of the results.  For any test report referred in this report, the latest version (including any revisions) is always referred to.  If the latest version is a revision, it replaces the previous version. See the table below for revisions and versions. Test Report No. 16196710H Page 3 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation ICES Interference-Causing Equipment Standard AC Alternating Current IEC International Electrotechnical Commission AFH Adaptive Frequency Hopping IEEE Institute of Electrical and Electronics Engineers AM Amplitude Modulation IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Develo pment Canada Ant, ANT Antenna ISO International Organization for Standardization AP Access Point JAB Japan Accreditation Board ASK Amplitude Shift Keying LAN Local Area Network Atten., ATT Attenuator LIMS Laboratory Information Management System AV Average MCS Modulation and Coding Scheme BPSK Binary Phase-Shift Keying MRA Mutual Recognition Arrangement BR Bluetooth Basic Rate N/A Not Applicable BT Bluetooth NIST National Institute of Standards and Technology BT LE Bluetooth Low Energy NS No signal detect. BW BandWidth NSA Normalized Site Attenuation Cal Int Calibration Interval NVLAP National Voluntary Laboratory Accreditation Pro gram CCK Complementary Code Keying OBW Occupied Band Width Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectri ques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PRBS Pseudo-Random Bit Sequence DSSS Direct Sequence Spread Spectrum PSD Power Spectral Density EDR Enhanced Data Rate QAM Quadrature Amplitude Modulation EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QP Quasi-Peak EMC ElectroMagnetic Compatibility QPSK Quadri-Phase Shift Keying EMI ElectroMagnetic Interference RBW Resolution Band Width EN European Norm RDS Radio Data System ERP, e.r.p. Effective Radiated Power RE Radio Equipment EU European Union RF Radio Frequency EUT Equipment Under Test RMS Root Mean Square Fac. Factor RSS Radio Standards Specifications FCC Federal Communications Commission Rx Receiving FHSS Frequency Hopping Spread Spectrum SA, S/A Spectrum Analyzer FM Frequency Modulation SG Signal Generator Freq. Frequency SVSWR Site-Voltage Standing Wave Ratio FSK Frequency Shift Keying TR Test Receiver GFSK Gaussian Frequency-Shift Keying Tx Transmitting GNSS Global Navigation Satellite System VBW Video BandWidth GPS Global Positioning System Vert. Vertical Hori. Horizontal WLAN Wireless LAN Test Report No. 16196710H Page 4 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 CONTENTS PAGE SECTION 1: Customer Information ......................................................................................... 5 SECTION 2: Equipment Under Test (EUT) .............................................................................. 5 SECTION 3: Test Summary ...................................................................................................... 6 SECTION 4: Operation of EUT during testing ........................................................................ 9 SECTION 5: Radiated Spurious Emission ............................................................................ 10 SECTION 6: Automatically deactivate ......................................................…

Text truncated - open the document above for the full version.