MQ4AP700CWLAN 2.4G AP

802.11b Access Point User’s Guide - FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement This device and its antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. All trademarks and brand names are the property of their respective proprietors. Specifications are subject to change without prior notification. - Table of Content Introduction ............................................................................................................................ 1 FEATURES............................................................................................................................. 1 PARTS NAMES AND FUNCTIONS............................................................................................ 2 Solid .................................................................................................................................. 2 FACTORY DEFAULT SETTINGS............................................................................................... 4 Wireless AP....................................................................................................................... 4 Hardware Connection ............................................................................................................5 About the Operation Modes .................................................................................................. 6 ACCESS POINT MODE............................................................................................................ 6 BRIDGE MODE...................................................................................................................... 7 CLIENT MODE (INFRASTRUCTURE) ....................................................................................... 8 CLIENT MODE (AD-HOC) ...................................................................................................... 9 Configuration ........................................................................................................................ 10 LOGIN.................................................................................................................................. 10 STATUS................................................................................................................................11 System ............................................................................................................................. 11 System Log ......................................................................................................................12 Statistics.......................................................................................................................... 13 Active Clients ..................................................................................................................13 WIRELESS............................................................................................................................ 15 Basic Settings..................................................................................................................15 Advanced Settings ........................................................................................................... 16 Security ........................................................................................................................... 20 Access Control ................................................................................................................ 22 Site Survey ...................................................................................................................... 23 WDS Setting ....................................................................................................................24 TCP/IP ................................................................................................................................ 26 Basic .............................................................................................................................…

Text truncated - open the document above for the full version.

AboCom Systems, Inc. Aug. 4, 2004 Federal Communications Commission Authorization and Evaluation Division FCC IDMQ4AP700C Confidentiality Request Pursuant to Sections 0..457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accomparrting this Application As outlined below: 1. Block Diagram 2. Circuit Diagram The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Theo Chen / Engineer Applicant: AboCom Systems, Inc. ADDRESS: 3F, No.57, Singjhong Rd, Neihu District, Taipei City 114, Taiwan(R.O.C.) TEL: 02-2796-3100 FAX: 02-2796-3190

REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A1 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT

FCC ID: MQ4AP700C Label Location

REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A2 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A3 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A4 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A5 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A6 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A7 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A8 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A9 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A10 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A11 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A12 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255 REPORT NO. : F431216 SPORTON International Inc. PAGE NUMBER : A13 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 27, 2004 FAX : 886-2-2696-2255

FCC ID:MQ4AP700C Description of Operation EUT is a Wireless 802.11b Access Point with 11 channels.The Wireless 802.11b Access Point is an IEEE802.11b compliant access point, which provides a powerful high-speed wireless connection for compatible wireless-enabled devices into the network with the freedom to roam. This Access Point provides 64/128bit WEP encryption, WPA and IEEE802.1x which ensures a high level of security to protects users’ data and privacy. The MAC Address filter prevents the unauthorized MAC Addresses from accessing your Wireless LAN. Your network security is therefore double assured. The web-based management utility is provided for easy configuration that your wireless network connection is ensured to be always solid and hassle free.

FCC ID: MQ4AP700C Issued on Apr. 27, 2004 Report No.: F431216 SPORTON International Inc. TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT CATEGORY : Portable End Product PRODUCT NAME : WLAN 2.4G AP FCC ID. : MQ4AP700C FILING TYPE : Certification BRAND NAME : Abocom MODEL NAME : AP700C APPLICANT : AboCom Systems Inc. 3F, No.57, Singjhoug Rd., Neihu District, Taipei City114, Taiwan (R.O.C.) MANUFACTURER : Same as Applicant ISSUED BY : AboCom Systems Inc. 3F, No.57, Singjhoug Rd., Neihu District, Taipei City114, Taiwan (R.O.C.) Statements: The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. Certificate or Test Report could not be used by the applicant to claim the product endorsement by CNLA, NVLAP or any agency of U.S. government. The test equipment used to perform the test are calibrated and traceable to NML/ROC or NIST/USA. Dr. Alan Lane Vice General Manager Sporton International Inc. Lab Code: 200079-0 1190 ILAC MRA FCC ID: MQ4AP700C Issued on Apr. 27, 2004 Report No.: F431216 SPORTON International Inc. FCC ID. : MQ4AP700C TEL : 886-2-2696-2468 Page No. : i FAX : 886-2-2696-2255 Issued Date : Apr. 27, 2004 Table of Contents History of this test report....................................................................................................................................ii 1. General Description of Equipment under Test.............................................................................................1 1.1. Applicant..........................................................................................................................................................................................1 1.2. Manufacturer ...................................................................................................................................................................................1 1.3. Basic Description of Equipment under Test ....................................................................................................................................1 1.4. Features of Equipment under Test..................................................................................................................................................1 1.5. Table for Carrier Frequencies .........................................................................................................................................................2 2. Test Configuration of the Equipment under Test.........................................................................................3 2.1. Description of the Test ....................................................................................................................................................................3 2.2. Frequency Range Investigated .......................................................................................................................................................3 2.3. Description of Test Supporting Units...............................................................................................................................................4 2.4. Connection Diagram of Test System ..............................................................................................................................................6 2.5. Test Software ..................................................................................................................................................................................7 3. Test Location and Standards .........................................................................................................................8 3.1. Test Location...................................................................................................................................................................................8 3.2. Test Conditions ...............................................................................................................................................................................8 3.3. Standards for Methods of Measurement .........................................................................................................................................8 3.4. DoC Statement................................................................................................................................................................................8 4. List of Measurements......................................................................................................................................9 4.1. Summary of the Test Results ..........................................................................................................................................................9 5. Test Result .....................................................................................................................................................10 5.1. Test of 6dB Spectrum Bandwidth ( DSSS System ) .....................................................................................................................10 5.2. Test of Maximum Peak Output Power ..........................................................................................................................................13 5.3. Test of Peak Power Spectral Density............................................................................................................................................14 5.4. Test of Band Edges Emission .......................................................................................................................................................17 5.5. Test of AC Power Line Conducted Emission ................................................................................................................................20 5.6. T…

Text truncated - open the document above for the full version.

1.1.1. Photographs of Conducted Emission Test Configuration z The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW SIDE VIEW Photographs of Radiated Emission Test Configuration z The photographs show the configuration that generates the maximum emission. F R O N T V I E W REAR VIEW