MQ4WU5207802.11n/b/g RT3050 USB Adaptor

WU5207 802.11n/b/g compliant 2.4GHz WiFi System USB Dongle APO Generic User Guide - 2 - Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. Consult the dealer or an experienced radio/TV technician for help. WU5207 B-Label Trade Name: AboCom MAC Label 25mm(W) x16mm(L) - 3 - Table of Contents Chapter 1: Introduction 5 Package Contents 5 How it works 5 System requirements 5 Appearance 5 WU5207 Image 5 Start using 6 Chapter 2: Utility control 7 Utility Form 8 Simple control 9 Update FW 9 Network Setting 10 IP Setting 11 Wireless Setting 11 WiFi Status 12 Refresh Button 12 Save button 12 Close Button 12 - 4 - Chapter 1: Introduction Package Contents The following items should be included:  1pcs WU5207  1pcs User manual If any of the above items are damaged or missing, please contact your dealer immediately. Notice: Abocom has the right to exchange the design of package and include items without inform the users. System requirements OS: Windows XP SP2 with administrator privilege. Windows Vista, Windows 7. CPU: Intel Pentium M 1.7Ghz (2005) is workable at 5 frames per second. For 15 frames per second, a dual-core CPU (2006) is recommended. Graphic card: A stand-alone graphic card is recommended, but not required.ʳ A good graphic card could double frame rate for a slow CPU. ʳ Important Notice: For better transmitting quality, we strongly recommend to put the wireless receiver horizontally in open space, do not put them into cabinet or cupboard that will reduce the wireless transmitting signal. - 5 - Appearance [ WU5207 ] ItemPartDescription 1 LED Blue LED, indicate the activity signal. 2 USB slot Connector to your NB and PC , support USB2.0 , downward fit USB 1.0 1 2 - 6 - Start Using 1.Confirm your NB / PC already power on and work normally. 2. Plug in the WU5207 to your NB. (don’t plug-in before Windows start) Please pay patient to await the NB desktop screen to reveal on the projector or LCD TV which user decided. - 7 - Chapter 2: Utility Control When user plug-in the WU5207 to NB or PC, and collocate with WU5207_tool_lite.exe It will show the Utility. - 8 - Utility form: Item Part Description 1 Control Window Main Control Window 2 Virtual CD-ROM Device Show the Virtual CD-ROM location 3 Search Search AP in environment 4 Update FW Update WU5207 and VB202 FW 5 Network setting User’s desktop screen resolution 6 Close Close the main Window. 1 2 3456 - 9 - Simple control Update FW: To choice what the FW need be update, and use the “Browse” button to find the correct file path. ItemPartDescription 1 Boot Loader Update the boot loader of WU5207 2 Dongle Update the Kernel of WU5207 3 CDROM ISO Update the ISO of WU5207 4 Receiver Wi-Fi Update the Wi-Fi module FW of the collocate Receiver 5 Receiver Update the Main board FW of the collocate Receiver - 10 - Network setting: User could manual the Wireless setting; include the security, searching function in this page. - 11 - IP setting:  Mode: WU5207 provide three modes for user choice. STATIC / DHCP / Auto IP.  IP address: User could manual key-in the IP address.  Net mask: User could manual key-in the Net mask address.  Gateway: User could manual key-in the Gateway address.  MAC address: It is factory default value. Un-changeable.  Master DNS: User could manual key-in the Master DNS address.  Slave DNS: User could manual key-in the Slave DNS address.  Current IP: It is factory default value. Un-changeable.  Auto IP Probe Count: User could manual key-in the value for Auto IP mode.  Auto IP Announce Count: User could manual key-in the value for Auto IP mode.  Auto IP Packet Interval: User could manual key-in the value for Auto IP mode. Wireless setting:  Network Type: WU5207 provide two modes for user choice. Infrastructure / AdHoc.  Authentication: WU5207 provide four modes for user choice. OPEN / Shared / WPAPSK / WPA2PSK.  Encryption: WU5207 provide four modes for user choice. NONE / WEP / TKIP / AES.  SSID: This will base on the AP which WU5207 searching and login.  Channel: This will base on the AP wireless channel which WU5207 searching and login.  Country Region: This is factory default. Un-changeable.  WEP Key 1~4: User could manual key-in the password under WEP security mode.  WPAPSK: User could manual key-in the password under WPAPSK security mode. - 12 - WiFi Status: This block will reveal the current WiFi status of WU5207 (Unchangeable). The reveal items include:  WiFi Channel  SSID  RSSI value  SNR Value  TX OK packet quantity.  TX Error packet quantity.  RX OK packet quantity.  RX Error packet quantity.  One Collision value.  More Collisions value.  TX Rate value Refresh Button: User could use this button to side-survey the wireless AP around the r…

Text truncated - open the document above for the full version.

802.11n/b/g RT3050 USB Adaptor FCC ID : MQ4WU5207 IC : 28268-WU5207P 3210ZYXW456789 123XYZ0987654 FCC LABEL white LABEL LOCATION 69mm 11mm 802.11n/b/g RT3050 USB Adaptor FCC ID : MQ4WU5207 IC : 28268-WU5207P 3210ZYXW456789 123XYZ0987654 69*11 mm FCC LABEL

SPORTON International Inc. PAGE NUMBER : A1 OF A3 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 12, 2010 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT SPORTON International Inc. PAGE NUMBER : A2 OF A3 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 12, 2010 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A3 OF A3 TEL : 886-2-2696-2468 ISSUED DATE : Apr. 12, 2010 FAX : 886-2-2696-2255

SPORTON INTERNATIONAL INC. Page Number : 1 of 29 TEL : 886-3-327-3456 Report Issued Date : Apr. 08, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : MQ4WU5207 FCC SAR Test Report Report No. : FA011909-05 FCC SAR Test Report APPLICANT : AboCom Systems, Inc EQUIPMENT : 802.11n/b/g RT3050 USB Adaptor BRAND NAME : AboCom MODEL NAME : WU5207 FCC ID : MQ4WU5207 STANDARD : FCC 47 CFR Part 2 (2.1093) IEEE C95.1-1999 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was received on Mar. 24, 2010 and completely tested on Mar. 30, 2010. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Roy Wu / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 29 TEL : 886-3-327-3456 Report Issued Date : Apr. 08, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : MQ4WU5207 FCC SAR Test Report Report No. : FA011909-05 Table of Contents Revision History ................................................................................................................................................................ 3 1. Statement of Compliance .......................................................................................................................................... 4 2. Administration Data ................................................................................................................................................... 5 2.1 Testing Laboratory ............................................................................................................................................ 5 2.2 Applicant ........................................................................................................................................................... 5 2.3 Manufacturer .................................................................................................................................................... 5 2.4 Application Details ............................................................................................................................................ 5 3. General Information ................................................................................................................................................... 6 3.1 Description of Device Under Test (DUT) ........................................................................................................... 6 3.2 Product Photos ................................................................................................................................................. 6 3.3 Applied Standards ............................................................................................................................................ 7 3.4 Device Category and SAR Limits ..................................................................................................................... 7 3.5 Test Conditions ................................................................................................................................................. 7 3.5.1 Ambient Condition .................................................................................................................................. 7 3.5.2 Test Configuration ................................................................................................................................... 7 4. Specific Absorption Rate (SAR) ................................................................................................................................ 8 4.1 Introduction ....................................................................................................................................................... 8 4.2 SAR Definition .................................................................................................................................................. 8 5. SAR Measurement System ........................................................................................................................................ 9 5.1 E-Field Probe...................................................................................................................................................10 5.1.1 E-Field Probe Specification ...................................................................................................................10 5.1.2 E-Field Probe Calibration ....................................................................................................................... 11 5.2 Data Acquisition Electronics (DAE) .................................................................................................................. 11 5.3 Robot ............................................................................................................................................................... 11 5.4 Measurement Server .......................................................................................................................................12 5.5 Phantom ..........................................................................................................................................................13 5.6 Device Holder ..................................................................................................................................................14 5.7 Data Storage and Evaluation ...........................................................................................................................16 5.7.1 Data Storage .................…

Text truncated - open the document above for the full version.

Report No.: FR011909-05 FCC ID: MQ4WU5207 Page No. : 1 of 6 Appendix B. Test Photos Report No.: FR011909-05 FCC ID: MQ4WU5207 Page No. : 2 of 6 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR011909-05 FCC ID: MQ4WU5207 Page No. : 3 of 6 2. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR011909-05 FCC ID: MQ4WU5207 Page No. : 4 of 6 Test Configuration: 30MHz~1GHz FRONT VIEW REAR VIEW Report No.: FR011909-05 FCC ID: MQ4WU5207 Page No. : 5 of 6 Test Configuration: Above 1GHz FRONT VIEW REAR VIEW Report No.: FR011909-05 FCC ID: MQ4WU5207 Page No. : 6 of 6 SIDE VIEW