MSQ-M80TASUS Tablet

E8500 First Edition November 2013 15060-26800000 VivoTab Note 8 User Manual M80T Series e8500_M80TA_UM.indd 111/22/13 5:55:04 PM  ASUS VivoTab Note 8 User Manual Camera Camera indicator Touch screen panel Ambient light sensor Your VivoTab Note 8 Your VivoTab Note 8 is equipped with its own features for work and play. You can access these features using touch screen gestures or the bundled stylus. Top View e8500_M80TA_UM.indd 211/22/13 5:55:04 PM ASUS VivoTab Note 8 User Manual  Rear View Microphone Micro USB .0 portSpeaker/Headset port Power button Volume button Windows® button MicroSD card slot Audio speaker Audio speaker Stylus pen Rear camera e8500_M80TA_UM.indd 311/22/13 5:55:05 PM  ASUS VivoTab Note 8 User Manual Getting started Charge the VivoTab Note 8 for 8 hours before using it in battery mode for the first time. 1. Charge your VivoTab Note 8. A. Connect the micro USB cable to the power adapter. B. Plug the micro USB connector into your VivoTab Note 8. C. Plug the power adapter into a grounded power outlet. 2. Press the power button. e8500_M80TA_UM.indd 411/22/13 5:55:06 PM ASUS VivoTab Note 8 User Manual  Using the stylus The bundled stylus allows you to make selections, draw, or sketch on the touch screen panel of your VivoTab Note 8. Using the bundled microSD card* The bundled microSD card contains the Windows® system recovery image that allows you to repair or restore Windows® to your VivoTab Note 8. IMPORTANT! You must back up all your data to another storage device before recovering or repairing Windows®. WARNING! Do not reformat the bundled microSD card or use it as an external storage. NOTE: *The 8GB microSD is only bundled with the GB VivoTab Note 8. e8500_M80TA_UM.indd 511/22/13 5:55:06 PM  ASUS VivoTab Note 8 User Manual WARNING! The bottom of the VivoTab Note 8 can get warm to hot while in use or while charging the battery pack. When working on your VivoTab Note 8, do not place it on surfaces that can block the vents. CAUTION! • This VivoTab Note 8 should only be used in environments with ambient temperatures between 0°C (°F) and °C (9°F). • Refer to the rating label on the bottom of your VivoTab Note 8 and ensure that your power adapter complies with this rating. • The power adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source. IMPORTANT! • Ensure that your VivoTab Note 8 is connected to a grounded power adapter before turning it on for the first time. • Use only the power adapter bundled with your VivoTab Note 8. • When using your VivoTab Note 8 on power adapter mode, the socket outlet must be near to the unit and easily accessible. • Locate the input/output rating label on your VivoTab Note 8 and ensure that it matches the input/output rating information on your power adapter. Some VivoTab Note 8 models may have multiple rating output currents based on the available SKU. • Power adapter information: - Input voltage: 100-0Vac - Input frequency: 0-0Hz - Rating output current: A - Rating output voltage: V • For repairs and servicing, bring your VivoTab Note 8 with the bundled microSD card containing the Windows system recovery image to an authorized ASUS service center. Safety notices for your VivoTab Note 8 e8500_M80TA_UM.indd 611/22/13 5:55:06 PM ASUS VivoTab Note 8 User Manual  WARNING! Read the following precautions for your VivoTab Note 8’s battery: • Only ASUS-authorized technicians should remove the battery inside the device. • Never attempt to short-circuit your VivoTab Note 8’s battery. • The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. • Never attempt to dissamble and reassemble the battery. • Follow the warning labels for your personal safety. • Discontinue usage if leakage is found. • Risk of explosion if battery is replaced by an incorrect type. • This battery and its components must be recycled or disposed of properly. • Do not dispose of in fire.• Keep the battery and other small components away from children. Copyright Information You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, are and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. Limitation of Liability Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; () LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR () SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. e8500_M80TA_UM.indd 711/22/13 5:55:07 PM 8 ASUS VivoTab Note 8 User M…

Text truncated - open the document above for the full version.

Report No.: 131014C20 1 CONSTRUCTION PHOTOS OF EUT Report No.: 131014C20 2 Report No.: 131014C20 3 Report No.: 131014C20 4

FCC ID: MSQ-M80T IC: 3568A-M80T Back cover of EUT Label Location

0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 15100-08505000 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-08505000 1510-1D56000 F5 15100-08505000 M80T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 M80T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 15100-0850G000 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-0850G000 1510-1D4T000 L80T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 F5 15100-0850G000 L80T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 15100-08508000 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-08508000 1510-1D58000 R80T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 F5 15100-08508000 R80T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-08505000 1510-1D56000 M81T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 15100-XXXXXXXX F5 15100-XXXXXXX M81T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 15100-XXXXXXXX 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-0850G000 1510-1D4T000 L81T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 F5 15100-XXXXXXX L81T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-08508000 1510-1D58000 R81T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 15100-XXXXXXXX F5 15100-XXXXXXX R81T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-08505000 1510-1D56000 M82T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 15100-XXXXXXXX F5 15100-XXXXXXX M82T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 15100-XXXXXXXX 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-0850G000 1510-1D4T000 L82T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 F5 15100-XXXXXXX L82T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100 0512-66366558 0512-66368556 021-38113768 网印 卷装 70x13mm(+/-0.2mm) 康硕 康硕 1mm 70mm 13mm 0.8RX4 0.8RX4 15100-08508000 1510-1D58000 R82T PCG11(0.125MM)+3M7533水膠+亮P 白底黑字 15100-XXXXXXXX F5 15100-XXXXXXX R82T 7mm 5mm 5mm 5mm 60 65 7075 80 85 90 95100 5mm 60 65 7075 80 85 90 95100

Report No.: 131014C20 5 Report No.: 131014C20 6 Report No.: 131014C20 7 Report No.: 131014C20 8 Report No.: 131014C20 9 Report No.: 131014C20 10 Report No.: 131014C20 11 Report No.: 131014C20 12 Report No.: 131014C20 13 Report No.: 131014C20 14 Report No.: 131014C20 15 Report No.: 131014C20 16 Report No.: 131014C20 17 Report No.: 131014C20 18 Report No.: 131014C20 19 Report No.: 131014C20 20

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Nov. 20, 2013 Report No. : SA131014C20 Revision : R02 Appendix A. SAR Plots of System Verification The plots for system verification with largest deviation for each SAR system combination are shown as follows. Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2013/11/06 System Check_B2450_131106 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B2450_1106 Medium parameters used: f = 2450 MHz; σ = 1.972 S/m; ε r = 51.262; ρ = 1000 kg/m 3 Ambient Temperature：21.7 °C; Liquid Temperature：20.5°C DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(6.84, 6.84, 6.84); Calibrated: 2012/12/10; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2013/04/24 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 19.5 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.768 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 26.0 W/kg SAR(1 g) = 12.7 W/kg; SAR(10 g) = 5.89 W/kg Maximum value of SAR (measured) = 19.3 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2013/11/07 System Check_B5200_131107 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: B5G_1107 Medium parameters used: f = 5200 MHz; σ = 5.354 S/m; ε r = 47.668; ρ = 1000 kg/m 3 Ambient Temperature：21.2 °C; Liquid Temperature：20.5°C DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(4.23, 4.23, 4.23); Calibrated: 2012/12/10; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2013/04/24 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 13.5 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 54.713 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 27.8 W/kg SAR(1 g) = 7.03 W/kg; SAR(10 g) = 2 W/kg Maximum value of SAR (measured) = 14.6 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2013/11/08 System Check_B5300_131108 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5300 MHz;Duty Cycle: 1:1 Medium: B5G_1108 Medium parameters used: f = 5300 MHz; σ = 5.481 S/m; ε r = 47.297; ρ = 1000 kg/m 3 Ambient Temperature：21.4 °C; Liquid Temperature：20.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(4.31, 4.31, 4.31); Calibrated: 2013/04/30; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn360; Calibrated: 2013/01/30 - Phantom: ELI v4.0_Right; Type: QDOVA001BA; Serial: TP:1043 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 15.5 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 57.447 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 30.7 W/kg SAR(1 g) = 7.36 W/kg; SAR(10 g) = 2.09 W/kg Maximum value of SAR (measured) = 15.4 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2013/11/07 System Check_B5600_131107 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: B5G_1107 Medium parameters used: f = 5600 MHz; σ = 5.9 S/m; ε r = 46.819; ρ = 1000 kg/m 3 Ambient Temperature：21.2 °C; Liquid Temperature：20.5°C DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(3.39, 3.39, 3.39); Calibrated: 2012/12/10; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2013/04/24 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 16.0 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 57.131 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 34.4 W/kg SAR(1 g) = 7.64 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 16.4 W/kg Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2013/11/07 System Check_B5800_131107 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: B5G_1107 Medium parameters used: f = 5800 MHz; σ = 6.178 S/m; ε r = 46.487; ρ = 1000 kg/m 3 Ambient Temperature：21.2 °C; Liquid Temperature：20.5°C DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(3.83, 3.83, 3.83); Calibrated: 2012/12/10; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2013/04/24 - Phantom: ELI 4.0; Type: QDOVA001BA; Serial: TP:1206 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 13.6 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 51.577 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 29.2 W/kg SAR(1 g) = 6.79 W/kg; SAR(10 g) = 1.89 W/kg Maximum value of SAR (measured) = 14.5 W/kg FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Nov. 20, 2013 Report No. : SA131014C20 Revision : R02 Appendix B. SAR Plots of SAR Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination, and measured SAR > 1.5 W/kg are shown as follows. Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2013/11/06…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 28 Report No. : SA131014C20 Issued Date : Nov. 20, 2013 Revision : R02 FCC SAR Test Report Report No. : SA131014C20 Applicant : ASUSTek COMPUTER INC. Address : 4F., No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Product : ASUS Tablet FCC ID : MSQ-M80T Brand : ASUS Model No. : M80T Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r01 KDB 248227 D01 v01r02 / KDB 447498 D01 v05r01 / KDB 616217 D04 v01r01 Sample Received Date : Oct. 14, 2013 Date of Testing : Nov. 06, 2013 ~ Nov. 08, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 28 Report No. : SA131014C20 Issued Date : Nov. 20, 2013 Revision : R02 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 7 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 7 3.2 SPEAG DASY System ................................................................................................................................................. 7 3.2.1 Robot.................................................................................................................................................................. 8 3.2.2 Probes ................................................................................................................................................................ 9 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 9 3.2.4 Phantoms ......................................................................................................................................................... 10 3.2.5 Device Holder ................................................................................................................................................... 11 3.2.6 System Validation Dipoles ................................................................................................................................ 11 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 12 3.3 SAR System Verification ............................................................................................................................................ 15 3.4 SAR Measurement Procedure ................................................................................................................................... 16 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 16 3.4.2 Volume Scan Procedure................................................................................................................................... 16 3.4.3 Power Drift Monitoring ...................................................................................................................................... 17 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 17 3.4.5 SAR Averaged Methods .......…

Text truncated - open the document above for the full version.

Report No.: RF131014C20-3 1 of 24 Report Format Version 5.0.0 DFS TEST REPORT REPORT NO.: RF131014C20-3 MODEL NO.: M80T (Refer to item 2.2 for more detail) FCC ID: MSQ-M80T RECEIVED: Oct. 14, 2013 TESTED: Nov. 07, 2013 ISSUED: Nov. 08, 2013 APPLICANT: ASUSTeK COMPUTER INC. ADDRESS: 4F, No.150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131014C20-3 2 of 24 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION ........................................................................................................ 4 2. EUT INFORMATION ................................................................................................... 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ....................................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ......................................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ....................................... 5 2.4 EUT MAXIMUM CONDUCTED POWER .................................................................... 6 2.5 EUT MAXIMUM E.I.R.P. POWER ............................................................................... 7 2.6 TRANSMIT POWER CONTROL (TPC) ...................................................................... 8 2.7 STATEMENT OF MAUNFACTURER ......................................................................... 8 3. U-NII DFS RULE REQUIREMENTS........................................................................... 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ................................................. 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS .............................................. 10 4. TEST & SUPPORT EQUIPMENT LIST .................................................................... 12 4.1 TEST INSTRUMENTS .............................................................................................. 12 4.2 DESCRIPTION OF SUPPORT UNITS ..................................................................... 12 5. TEST PROCEDURE................................................................................................. 13 5.1 ADT DFS MEASUREMENT SYSTEM ...................................................................... 13 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL ................................... 14 5.3 DEVIATION FROM TEST STANDARD .................................................................... 14 5.4 RADIATED TEST SETUP CONFIGURATION .......................................................... 15 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE .................................................... 15 6. TEST RESULTS ....................................................................................................... 16 6.1 SUMMARY OF TEST RESULTS .............................................................................. 16 6.2 TEST RESULTS ....................................................................................................... 17 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. .................................................................................................................... 17 6.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME .................... 18 6.2.3 NON-OCCUPANCY PERIOD ................................................................................... 20 6.2.4 NON-ASSOCIATED TEST ....................................................................................... 22 6.2.5 NON- CO-CHANNEL TEST ...................................................................................... 22 7. INFORMATION ON THE TESTING LABORATORIES ............................................. 23 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ................................................................................................................... 24 Report No.: RF131014C20-3 3 of 24 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF131014C20-3 Original release Nov. 08, 2013 Report No.: RF131014C20-3 4 of 24 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: ASUS Tablet MODEL: M80T (Refer to item 2.2 for more detail) …

Text truncated - open the document above for the full version.

Report No.: RF131014C20 1 of 66 Report Format Version 5.0.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF131014C20 MODEL NO.: M80T (Refer to item 3.1 for more details) FCC ID: MSQ-M80T RECEIVED: Oct. 14, 2013 TESTED: Oct. 24, 2013 ~ Nov. 02, 2013 ISSUED: Nov. 18, 2013 APPLICANT: ASUSTek COMPUTER INC. ADDRESS: 4F., No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131014C20 2 of 66 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 6 1. CERTIFICATION ....................................................................................................... 7 2. SUMMARY OF TEST RESULTS .............................................................................. 8 2.1 MEASUREMENT UNCERTAINTY ................................................................................. 9 3. GENERAL INFORMATION ..................................................................................... 10 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 10 3.2 DESCRIPTION OF TEST MODES ......................................................................... 12 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAI…

Text truncated - open the document above for the full version.