MSQMPDONGLE3WIRELESS DONGLE

Covered List Attestation Letter Date: July 31, 2026 FCC ID: MSQMPDONGLE3 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern: Attestation Sections 2.911(d)(5) of the FCC Rules (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) ASUSTeK COMPUTER INC. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. ASUSTeK COMPUTER INC. (“the applicant”) further certifies that no cybersecurity or anti- virus software from Kaspersky Lab, Inc. (or its successors/assignees), including integrated Kaspersky software, is installed in the equipment being certified, pursuant to DA-24-886 and KDB 986446 D01 Guidance § B(2a). Section 2.911(d)(5)(ii) ASUSTeK COMPUTER INC. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as defined in § 1.50002 of the Commission’s rules, as an entity that produces covered communications equipment or services, nor as a subsidiary or affiliate of such an entity. If you have any questions, please feel free to contact me. Sincerely, ------------------------------------------------------ Jackson Yen / Associate Vice President ASUSTeK COMPUTER INC.

Designation of U.S. Agent for Service of Process Certification Attestation Letter Date: July 28, 2026 Grantee Code : MSQ To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information ASUSTeK COMPUTER I NC., as required by Section 2.911(d)(7), designates the contact below, located in the United States, for the purpose of acting as the Applicant’s agent for service of process. The Applicant acknowledges that it must maintain an agent for no less than one year after terminating all marketing and importation, or upon the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges its responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Signed:Designated U.S. Agent Signed: Signed:_________________________Signed:__________________________ Printed name: Jackson YenPrinted name: Gi gi Liu Title: Associate Vice PresidentTitle: CEO Company Name: ASUSTeK COMPUTER INC. FRN: 0005821988 Email: [email protected] TEL: +886-2-28943447 FAX: +886-2-28987364 Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Company Name: ASUS COMPUTER INTERNATIONAL FRN: 0033432428 Email: [email protected] TEL: 510-3999138 FAX: 510-6084555 Address: 48720 Kato Road, Fremont, CA 94538

Declaration of Authorization Date: July 31, 2026 FCC ID: MSQMPDONGLE3 Attn: Director of Certification I appoint the following agent to act on behalf of ASUSTeK COMPUTER INC. for the preparation of this equipment certification application: Authorized Agent: Stanley Wu, DEKRA Testing and Certification Co., Ltd. I certify that the submitted documents properly describe the device for which certification is sought. I further certify that each unit manufactured, imported, or marketed will bear a label identical to that submitted for approval. I acknowledge that all responsibility for complying with the terms and conditions of certification remains with ASUSTeK COMPUTER INC. Agency Agreement Expiration Date: Dec. 31, 2026 ------------------------------------------------------ Jackson Yen / Associate Vice President ASUSTeK COMPUTER INC.

Confidentiality Request Letter Date: July 31, 2026 FCC ID: MSQMPDONGLE3 Pursuant to sections 0.457(d) and 0.459 of the FCC Rules, the applicant requests that the information of application be held confidential, in accordance with the table below: ExhibitsLong-Term Confidentiality Short-Term Confidentiality Block DiagramsO Operational DescriptionO SchematicsO Parts List Tune-up Info. External PhotosO Internal PhotosO Test Setup PhotosO User’s ManualO Long-Term Confidentiality: The exhibits listed above as Long-Term Confidentiality should be permanently withheld from public inspection due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The exhibits listed above as Short-Term Confidentiality should be withheld from public review until Sep. 01, 2026, and prior to marketing. Sincerely, ------------------------------------------------------ Jackson Yen / Associate Vice President ASUSTeK COMPUTER INC.

IC: 3568A-MPDONGLE3

Report No.: 2660298R-SAUSV01S-A Page: 1 of 24 Test report No.: 2660298R-SAUSV01S-A SAR Test Report Product Name WIRELESS DONGLE Trademark ASUS Model and /or type reference MPDONGLE3 Applicant ́s name / address ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Manufacturer ́s name ASUSTeK COMPUTER INC. FCC ID MSQMPDONGLE3 Applicable Standard IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Test Result Max. SAR Measurement (1g) 2.4 GHz: 0.100 W/kg Verdict Summary IN COMPLIANCE Documented By (Supervisor / Jinn Chen) Te s t e d B y (Senior Engineer / Luke Cheng) Approved By (Assistant Manager / San Lin) Date of Receipt 2026/06/09 Date of Issue 2026/07/23 Report Version V1.0 Report No.: 2660298R-SAUSV01S-A Page: 2 of 24 INDEX Page 1. General Information ........................................................................................................ 5 1.1 EUT Description ................................................................................................. 5 1.2 Antenna List ....................................................................................................... 5 1.3 Test Environment ................................................................................................ 6 1.4 Measurement procedures................................................................................... 7 2. SAR Measurement System ............................................................................................. 8 2.1 DASY System Description .................................................................................. 8 2.2 Area Scans ......................................................................................................... 9 2.3 DASY E-Field Probe ......................................................................................... 10 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ........................ 11 2.5 Robot ................................................................................................................ 12 2.6 Device Holder ................................................................................................... 12 2.7 Phantom ........................................................................................................... 13 3. Tissue Simulating Liquid .............................................................................................. 14 3.1 The composition of the tissue simulating liquid ................................................ 14 3.2 Tissue Calibration Result .................................................................................. 14 3.3 Tissue Dielectric Parameters for Phantoms ..................................................... 15 4. Measurement Procedure ............................................................................................... 16 4.1 SAR System Check .......................................................................................... 16 4.2 SAR Measurement Procedure .......................................................................... 17 5. RF Exposure Limits ....................................................................................................... 18 6. Test Equipment List ...................................................................................................... 19 7. Measurement Uncertainty ............................................................................................. 21 8. Conducted Power Measurement (Including tolerance allowed for production unit) ................................................................................................................................ 22 9. Test Results ................................................................................................................... 23 9.1 Test Results Summary ..................................................................................... 23 Appendix A. System Check Data Appendix B. Highest measurement Data Appendix C. Test Setup Photographs Appendix D. Probe Calibration Data Appendix E. Dipole & Source Calibration Appendix F. Product Photos-Please refer to the file: 2660298R-Product Photos Report No.: 2660298R-SAUSV01S-A Page: 3 of 24 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3. This report must not be used to claim product endorsement by TAF or any agency of the government. 4. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. 5. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account…

Text truncated - open the document above for the full version.

Report No.: 2660298R-SAUSV01S-A Page: 1 of 2 Appendix A. System Check Data Report No.: 2660298R-SAUSV01S-A Page: 2 of 2 Test Laboratory: DEKRA Date: 2026/06/29 System Performance Check_2450MHz-Head Communication System: UID 0, CW; Frequency: 2450 MHz Communication System PAR: 0 dB Medium parameters used: f = 2450 MHz; σ = 1.74 S/m; ε r = 39.95; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN7631; ConvF(8.01, 7.42, 7.22) @ 2450 MHz; Calibrated: 2026/02/20 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1651; Calibrated: 2026/02/16 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/2450MHz_Head/Area Scan (10x10x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 18.1 W/kg Configuration/2450MHz_Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.43 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 23.0 W/kg SAR(1 g) = 12.4 W/kg; SAR(10 g) = 6.07 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 54.8% Maximum value of SAR (measured) = 19.6 W/kg

Report No.: 2660298R-SAUSV01S-A Page: 1 of 2 Appendix B. Highest Measurement Data Report No.: 2660298R-SAUSV01S-A Page: 2 of 2 Test Laboratory: DEKRA Date: 2026/06/29 7_RF 2.4GHz_2.4G Wireless-2M_CH38_Left-side_5mm_ANT Main Communication System: UID 0, RF 2.4G; Frequency: 2478 MHz Communication System PAR: 0 dB Medium parameters used: f = 2478 MHz; σ = 1.78 S/m; ε r = 39.83; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN7631; ConvF(8.01, 7.42, 7.22) @ 2478 MHz; Calibrated: 2026/02/20 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1651; Calibrated: 2026/02/16 • Phantom: ELI V8.0; Type: QD OVA 004 AA; Serial: 2139 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (7x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0725 W/kg Configuration/Flat/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.928 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.0890 W/kg SAR(1 g) = 0.049 W/kg; SAR(10 g) = 0.025 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 15 mm) Ratio of SAR at M2 to SAR at M1 = 56.1% Maximum value of SAR (measured) = 0.0747 W/kg

Appendix D. Probe Calibration

Appendix E. Dipole & Source Calibration

Report No.: 2660298R-RFUSV01S-B Page: 1 of 22 Test Report No: 2660298R-RFUSV01S-B TEST REPORT FCC Rules & Regulations Product Name WIRELESS DONGLE Brand Name ASUS Model No. MPDONGLE3 FCC ID MSQMPDONGLE3 Applicant ́s Name / Address ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Manufacturer’s Name ASUSTeK COMPUTER INC. Test Method Requested, Standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 Verdict Summary IN COMPLIANCE Documented By Jinn Chen Approved By Alan Chen Date of Receipt 2026/06/09 Date of Issue 2026/07/23 Report Version V1.0 Report No.: 2660298R-RFUSV01S-B Page: 2 of 22 INDEX page Competences and Guarantees ................................................................................................................................ 4 General Conditions .................................................................................................................................................. 4 Revision History ....................................................................................................................................................... 5 Summary of Test Result .......................................................................................................................................... 6 1. General Information .................................................................................................................................. 7 1.1. EUT Description ....................................................................................................................................... 7 1.2. EUT Information ....................................................................................................................................... 8 1.3. Testing Applied Standards ........................................................................................................................ 8 1.4. Testing Location Information .................................................................................................................... 9 1.5. Ambient Conditions In The Laboratory ................................................................................................... 10 1.6. Measurement Uncertainty ...................................................................................................................... 10 1.7. List of Test Equipment ............................................................................................................................ 11 2. Test Configuration of EUT ...................................................................................................................... 12 2.1. Test Condition ......................................................................................................................................... 12 2.2. Test Frequency Mode ............................................................................................................................. 12 2.3. Duty Cycle .............................................................................................................................................. 12 2.4. Measurement Configuration ................................................................................................................... 13 2.5. Tested System Details ............................................................................................................................ 14 2.6. Configuration of Tested System ............................................................................................................. 14 3. AC Power Line Conducted Emission ..................................................................................................... 15 3.1. Test Setup ............................................................................................................................................... 15 3.2. Test Limit ................................................................................................................................................ 15 3.3. Test Procedure ....................................................................................................................................... 15 3.4. Test Result of AC Power Line Conducted Emission ............................................................................... 15 4. Occupied Bandwidth & DTS Bandwidth ................................................................................................. 16 4.1. Test Setup ............................................................................................................................................... 16 4.2. Test Limit ................................................................................................................................................ 16 4.3. Test Procedures ...................................................................................................................................... 16 4.4. Test Result of Occupied Bandwidth & DTS Bandwidth .......................................................................... 16 5. Maximum Peak Conducted Output Power ............................................................................................. 17 5.1. Test Setup ............................................................................................................................................... 17 5.2. Test Limit ................................................................................................................................................ 17 5.3. Test Procedures ...................................................................................................................................... 17 5.4. Test Result of Maximum Peak Conducted Output Power ...................................................................... 17 6. Maximum Power Spectral Density ..........................................................................…

Text truncated - open the document above for the full version.

Report No.: 2660298R-RFUSV01S-B Page : 1 of 17 Appendix A. Test Result of AC Power Line Conducted Emission TX_4M_2440MHz_Line TX_4M_2440MHz_Neutral Report No.: 2660298R-RFUSV01S-B Page : 2 of 17 Appendix B. Test Result of Occupied Bandwidth & DTS Bandwidth Modulation Frequency (MHz) 99% Occupied Bandwidth (MHz) DTS Bandwidth (MHz) Limit (MHz) 99% Occupied Bandwidth DTS Bandwidth GFSK (4Mbps) 2404 4.18 2.07 - ≧ 0.5 2440 4.19 1.86 - ≧ 0.5 2478 4.18 2.02 - ≧ 0.5 Report No.: 2660298R-RFUSV01S-B Page : 3 of 17 For 99% Occupied Bandwidth: GFSK/4M/2404MHz/Ch1/Ant.1 GFSK/4M/2440MHz/Ch19/Ant.1 GFSK/4M/2478MHz/Ch38/Ant.1 Report No.: 2660298R-RFUSV01S-B Page : 4 of 17 For DTS Bandwidth: GFSK/4M/2404MHz/Ch1/Ant.1 GFSK/4M/2440MHz/Ch19/Ant.1 GFSK/4M/2478MHz/Ch38/Ant.1 Report No.: 2660298R-RFUSV01S-B Page : 5 of 17 Appendix C. Test Result of Maximum Peak Conducted Output Power Modulation Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Limit (dBm) Result GFSK (4Mbps) 2404 8.99 30.00 Pass 2440 8.86 30.00 Pass 2478 8.77 30.00 Pass Report No.: 2660298R-RFUSV01S-B Page : 6 of 17 Appendix D. Test Result of Maximum Power Spectral Density Modulation Frequency (MHz) Maximum Power Spectral Density (dBm/3kHz) Limit (dBm/3kHz) Result GFSK (4Mbps) 2404 -9.99 8.00 Pass 2440 -10.22 8.00 Pass 2478 -9.94 8.00 Pass Report No.: 2660298R-RFUSV01S-B Page : 7 of 17 GFSK/4M/2404MHz/Ch1/Ant.1 GFSK/4M/2440MHz/Ch19/Ant.1 GFSK/4M/2478MHz/Ch38/Ant.1 Report No.: 2660298R-RFUSV01S-B Page : 8 of 17 Appendix E. Test Result of Antenna Port Conducted Emission GFSK/4M/2404MHz/Ch1/Ant.1 (Ref.) GFSK/4M/2404MHz/Ch1/Ant.1 GFSK/4M/2440MHz/Ch19/Ant.1 (Ref.) GFSK/4M/2440MHz/Ch19/Ant.1 GFSK/4M/2478MHz/Ch38/Ant.1 (Ref.) GFSK/4M/2478MHz/Ch38/Ant.1 Report No.: 2660298R-RFUSV01S-B Page : 9 of 17 GFSK/4M/2404MHz/Ch1/Ant.1(Band Edge) GFSK/4M/2478MHz/Ch38/Ant.1(Band Edge) Report No.: 2660298R-RFUSV01S-B Page : 10 of 17 Appendix F. Test Result of Radiated Emission TX_4M_2404MHz_H TX_4M_2404MHz_V TX_4M_2440MHz_H TX_4M_2440MHz_V Report No.: 2660298R-RFUSV01S-B Page : 11 of 17 TX_4M_2478MHz_H TX_4M_2478MHz_V TX_4M_2440MHz_H TX_4M_2440MHz_V Report No.: 2660298R-RFUSV01S-B Page : 12 of 17 TX_4M_2404MHz_H_Average TX_4M_2404MHz_H_Peak TX_4M_2404MHz_V_Average TX_4M_2404MHz_V_Peak Report No.: 2660298R-RFUSV01S-B Page : 13 of 17 TX_4M_2478MHz_H_Average TX_4M_2478MHz_H_Peak TX_4M_2478MHz_V_Average TX_4M_2478MHz_V_Peak Report No.: 2660298R-RFUSV01S-B Page : 14 of 17 Worst-Case Emissions Above 18 GHz TX_4M_2440MHz_H TX_4M_2440MHz_V

R&D,productionandsalesofprofessionalwirelessterminalantenna 承认书 SPECIFICATIONFORAPPROVAL 客户名称CustomerName：珠海市智迪科技股份有限公司 产品型号ProductModel：RG72 客户料号CustomerP/N： 佳德料号JiadeP/N：WJ.05.0000069 产品规格SPECIFFCATIONS:2400MHZ-2500MHZ钢片天线 制作日期Productiondate：2026-06-16 封样版本SampleVersion：R2 生产厂商：佳德无线科技（深圳）有限公司 深圳地址：深圳市福田区泰然六路苍松大厦北座601-602 电话：0755-33353180邮箱：[email protected] 网址：www.jiadew.com 佳德（JIADE） 编制（FICTION）结构（SE）研发（R&D） 客户（Customer） 采购（PUR）品质（QC）研发（R&D） R&D,productionandsalesofprofessionalwirelessterminalantenna NumberEffectivedateChangerecord R12026-05-25 Initialrelease R22026-06-16 Updatethedata R & D, production and sales of professional wireless terminal antenna 一、The basic parameters A. Electrical Characteristics 2400MHZ~2500MHZ 515 不加硅胶套< 2.0 不加硅胶套 >50% 50±25 Ohm Linear 不加硅胶套： 3.00dBi 钢片True qualities Metal Antenna / 24.32mm*19.96mm ± 0.2mm - 20 ̊C ~ + 60 ̊C Frequency VSWR Avg Efficiency Impedance Polarization Peak Gain B. Material & Mechanical Characteristics Material of Radiator Antenna Type Connector Type Dimension （ mm ） C. Environmental Operation Temperature Storage Temperature - 20 ̊C ~ + 60 ̊C R&D,productionandsalesofprofessionalwirelessterminalantenna 二、ElectricalSpecification ThosespecificationswerespeciallydefinedforRG72model. 三、VSWR 1MeasuringMethod 1.A50 Ω coaxialcableisconnectedtotheantenna.Thenthiscableisconnected toanetworkanalyzertomeasuretheVSWR 2.Keepingthisjigawayfrommetalatleast20cm 2MeasurementfrequencypointsandVSWRvalue 不加硅胶套 R&D,productionandsalesofprofessionalwirelessterminalantenna 四、Anechoicchamber Introduction: Microwavedarkroomandnoreflectionchamber,absorbingshortwavedarkroom darkroom.Microwavedarkroombyelectromagneticshieldingroom,filtering andisolation,groundingdevice,theventilationduct,indoordistributionsystem, monitoringsystem,ceilingwavematerialpart.Itisbasedonthewaveabsorbing materialastheliningoftheshieldroom,itcanabsorbthemostofthe electromagneticenergyintothesixwallisabettersimulationofthefreespace conditions. Themainworkingprincipleofmicrowaveanechoicchamberisaccordingtothe electromagneticwaveinthemediumfromthelowmagneticguidemagnetic directionofpropagationrules,absorbingmaterialstoguidetheelectromagnetic waveusinghighpermeability,throughresonance,asubstantialabsorptionof electromagneticwaveradiationenergy,bycouplingtheelectromagneticenergy intoheatenergy. mainperformance： Frequencyrange:400MHz~6GHzceilingreflectedwavelossmaterials:400MHz~ 6GHzisequaltoormorethan15dB(microwaveabsorbingmaterialbycompositewave absorbingmaterials,namelytaperedcontainingcarbonspongesuctionwavematerial pasteinferrite) R&D,productionandsalesofprofessionalwirelessterminalantenna 五、GaintableofAntenna 无源场型图 R&D,productionandsalesofprofessionalwirelessterminalantenna 无源效率增益 R&D,productionandsalesofprofessionalwirelessterminalantenna 十、AntennaDimensions R&D,productionandsalesofprofessionalwirelessterminalantenna 十一、ROHS: AntennaWJ.05.0000069meetsRoHSrequirements. 十二、Productpackaginginstructions: A.packingshouldmeetthemoisture-proof,vibration,pressureand mildewproof,etc. B.thesmallestpackingunitlogomusthavethemanufacturer trademarks,productmodel,name,codeandquantity. C.intheattachedpackinglist,certificateofapproval,andthefactory inspectionreport. ***************************END****************************