MSQ-MS-MD202MD202 Mouse

To: Federal Communications Commission Date: 02 December 2025 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) ASUSTeK COMPUTER INC. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) ASUSTeK COMPUTER INC. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: MD202 Mouse FCC ID: MSQ-MS-MD202 If you have any questions, please feel free to contact me Contact Person: Jackson Yen Position in the Company: ASUSTeK COMPUTER INC. Date of Signature: 02 December 2025 ___________________________ Signatory

Designation of U.S. Agent for Service of Process Certification Attestation Letter DATE: 02 December 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: MSQ-MS-MD202 ATTENTION: FCC Certification – Section 2.911(d)(7) Information ASUSTeK COMPUTER INC. as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicant’s agent for service of process. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Signed: Designated U.S. Agent Signed: Signed:_________________________ Signed:__________________________ Printed name: Jackson Yen Printed name: Gigi Liu Title: Associate Vice President Title: President Company Name: ASUSTeK COMPUTER INC. FRN: 0005821988 Email: [email protected] TEL: +886-2-28943447 FAX: +886-2-28987364 Address: 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Company Name: ASUS COMPUTER INTERNATIONAL FRN: 0033432428 Email: [email protected] TEL: (510) 608-4530 FAX: (510) 6084555 Address: 48720 Kato Road, Fremont, CA 94538, United States

Declaration of Authorization We Name: ASUSTeK COMPUTER INC. Address: 1F, No. 15, Lide Rd, Beitou, City: Taipei, 112 Country: Taiwan Declare that: Name Representative of agent: Stanley Wu Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No. 26, Huaya 1 st Rd., Guishan Dist., City: Taoyuan City 333411 Country: Taiwan. is authorized to apply for FCC Certification of the following product(s): Product description: MD202 Mouse Type designation: MD202 FCC ID: MSQ-MS-MD202 Trademark: ASUS on our behalf. This is valid until Nov. 18, 2026, or until FCC certification are completed, whichever comes sooner. ----------------------------------- Jackson Yen / Associate Vice President ASUSTeK Computer Inc

Request for Confidentiality Date: December 2, 2025 Subject: Confidentiality Request for: MSQ-MS-MD202 / 3568A-MSMD202 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☒ Permanent Block Diagrams ☒ Short Term External Photos ☒ Short Term Internal Photos ☒ Permanent Operation Description/Theory of Operation ☐ Permanent Parts List & Placement/BOM ☐ Permanent Tune-Up Procedure ☒ Permanent Schematics ☒ Short Term Test Setup Photos ☒ Short Term User’s Manual ______ ASUSTeK COMPUTER INC. _____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify PHOENIX in the event information regarding the product or the product is made available to the public before the requested period has expired. PHOENIX will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: (specify ISED expiration date / date of marketing). Sincerely, By: __________________________/ Certified Associate ___ Jackson Yen __________ (Signed Name) ( Print name)

Label Location (The back of the product)

MD202

Report No.: 2590550R-SAUSV01S-A Page: 1 of 2 Appendix A. System Check Data Report No.: 2590550R-SAUSV01S-A Page: 2 of 2 Test Laboratory: DEKRA Date: 2025/10/22 System Performance Check_2450MHz-Head DUT: Dipole 2450 MHz; Type: D2450V2 Communication System: UID 0, CW; Frequency: 2450 MHz Communication System PAR: 0 dB Medium parameters used: f = 2450 MHz; σ = 1.79 S/m; ε r = 40.1; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3979; ConvF(6.39, 8.11, 6.76) @ 2450 MHz; Calibrated: 2024/11/20 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1425; Calibrated: 2024/11/18 • Phantom: ELI 5.0; Type: QDOVA002AA; Serial: 1199 • Measurement SW: DASY52, Version 52.10 (4); Configuration/2450MHz-Head/Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 21.3 W/kg Configuration/2450MHz-Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 110.2 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 25.7 W/kg SAR(1 g) = 13.8 W/kg; SAR(10 g) = 6.72 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 54.9% Maximum value of SAR (measured) = 21.6 W/kg

Report No.: 2590550R-SAUSV01S-A Page: 1 of 3 Appendix B. Highest Measurement Data Report No.: 2590550R-SAUSV01S-A Page: 2 of 3 Test Laboratory: DEKRA Date: 2025/10/22 3_RF 2.4GHz_2.4G Wireless_CH0_Left-side_0mm DUT: Mouse; Type: MD202 Communication System: UID 0, RF WLAN 2.4G; Frequency: 2402 MHz Communication System PAR: 0 dB Medium parameters used: f = 2402 MHz; σ = 1.74 S/m; ε r = 40.18; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3979; ConvF(6.39, 8.11, 6.76) @ 2402 MHz; Calibrated: 2024/11/20 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1425; Calibrated: 2024/11/18 • Phantom: ELI 5.0; Type: QDOVA002AA; Serial: 1199 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (7x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0222 W/kg Configuration/Flat/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.366 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.0230 W/kg SAR(1 g) = 0.012 W/kg; SAR(10 g) = 0.00491 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 15 mm) Ratio of SAR at M2 to SAR at M1 = 50.2% Maximum value of SAR (measured) = 0.0198 W/kg Report No.: 2590550R-SAUSV01S-A Page: 3 of 3 Test Laboratory: DEKRA Date: 2025/10/22 7_Bluetooth_BLE-1M_CH0_Left-side_0mm DUT: Mouse; Type: MD202 Communication System: UID 0, BT 1M&3M&BLE; Frequency: 2402 MHz Communication System PAR: 0 dB Medium parameters used: f = 2402 MHz; σ = 1.74 S/m; ε r = 40.18; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration: • Probe: EX3DV4 - SN3979; ConvF(6.39, 8.11, 6.76) @ 2402 MHz; Calibrated: 2024/11/20 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1425; Calibrated: 2024/11/18 • Phantom: ELI 5.0; Type: QDOVA002AA; Serial: 1199 • Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (6x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0246 W/kg Configuration/Flat/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.515 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.0270 W/kg SAR(1 g) = 0.013 W/kg; SAR(10 g) = 0.00547 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 15 mm) Ratio of SAR at M2 to SAR at M1 = 52% Maximum value of SAR (measured) = 0.0230 W/kg

Appendix D. Probe Calibration

Appendix E. Dipole & Source Calibration

Report No.: 2590550R-SAUSV01S-A Page: 1 of 25 Test report No.: 2590550R-SAUSV01S-A SAR Test Report Product Name MD202 Mouse Trademark ASUS Model and /or type reference MD202 Applicant ́s name / address ASUSTeK COMPUTER INC. 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer ́s name ASUSTeK COMPUTER INC. FCC ID MSQ-MS-MD202 Applicable Standard IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Test Result Max. SAR Measurement (1g) 2.4 GHz: 0.026 W/kg Verdict Summary IN COMPLIANCE Documented By (Supervisor / Jinn Chen) Te s t e d B y (Senior Engineer / Luke Cheng) Approved By (Assistant Manager / San Lin) Date of Receipt 2025/09/18 Date of Issue 2025/11/13 Report Version V1.0 Report No.: 2590550R-SAUSV01S-A Page: 2 of 25 INDEX Page 1. General Information ........................................................................................................ 5 1.1 EUT Description ................................................................................................. 5 1.2 Antenna List ....................................................................................................... 5 1.3 SAR Test Exclusion Calculation ......................................................................... 6 1.4 Test Environment ................................................................................................ 7 1.5 Measurement procedures................................................................................... 8 2. SAR Measurement System ............................................................................................. 9 2.1 DASY System Description .................................................................................. 9 2.2 Area Scans ....................................................................................................... 10 2.3 DASY E-Field Probe ......................................................................................... 11 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ........................ 12 2.5 Robot ................................................................................................................ 13 2.6 Device Holder ................................................................................................... 13 2.7 Phantom ........................................................................................................... 14 3. Tissue Simulating Liquid .............................................................................................. 15 3.1 The composition of the tissue simulating liquid ................................................ 15 3.2 Tissue Calibration Result .................................................................................. 15 3.3 Tissue Dielectric Parameters for Phantoms ..................................................... 16 4. Measurement Procedure ............................................................................................... 17 4.1 SAR System Check .......................................................................................... 17 4.2 SAR Measurement Procedure .......................................................................... 18 5. RF Exposure Limits ....................................................................................................... 19 6. Test Equipment List ...................................................................................................... 20 7. Measurement Uncertainty ............................................................................................. 22 8. Conducted Power Measurement (Including tolerance allowed for production unit) ................................................................................................................................ 23 9. Test Results ................................................................................................................... 24 9.1 Test Results Summary ..................................................................................... 24 Appendix A. System Check Data Appendix B. Highest measurement Data Appendix C. Test Setup Photographs Appendix D. Probe Calibration Data Appendix E. Dipole & Source Calibration Appendix F. Product Photos-Please refer to the file: 2590550R-Product Photos Report No.: 2590550R-SAUSV01S-A Page: 3 of 25 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3. This report must not be used to claim product endorsement by TAF or any agency of the government. 4. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. 5. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide…

Text truncated - open the document above for the full version.

R&D,productionandsalesofprofessionalwirelessterminalantenna 承认书 SPECIFICATIONFORAPPROVAL 客户名称CustomerName：珠海市智迪科技股份有限公司 产品型号ProductModel：MB233T 客户料号CustomerP/N： 佳德料号JiadeP/N： WJ.05.0000046 产品规格SPECIFFCATIONS:频道2400MHZ-2500MHZ钢片天线 制作日期Productiondate：2025-08-22 封样版本SampleVersion：V1.0 生产厂商：佳德无线科技（深圳）有限公司 深圳地址：深圳市福田区泰然六路苍松大厦北座601-602 电话：0755-33353180邮箱：[email protected] 网址：www.jiadew.com 佳德（JIADE） 编制（FICTION）结构（SE）研发（R&D） 客户（Customer） 采购（PUR）品质（QC）研发（R&D） R&D,productionandsalesofprofessionalwirelessterminalantenna NumberEffectivedateChangerecord V1.02025-08-22 Initialrelease R & D, productionand sales of professionalwirelessterminalantenna 一、The basic parameters： A. ElectricalCharacteristics Frequency VSWR AvgEfficiency Impedance Polarization PeakGain 2400MHZ~2500MHZ 515 < 2 自由状态 >40% 50 ± 25 Ohm Linear 自由状态 ： 5.54dBi B. Material& MechanicalCharacteristics Materialof Radiator钢片Truequalities CableType/ ConnectorType/ Dimension （ mm ） 21.12mm*7.04mm*2mm C. Environmental OperationTemperature- 20 ̊C ~ + 60 ̊C StorageTemperature- 20 ̊C ~ + 60 ̊C R&D,productionandsalesofprofessionalwirelessterminalantenna 二、ElectricalSpecification: ThosespecificationswerespeciallydefinedforMB233Tmodel. 三、VSWR 1MeasuringMethod 1.A50Ωcoaxialcableisconnectedtotheantenna.Thenthiscableisconnected toanetworkanalyzertomeasuretheVSWR 2.Keepingthisjigawayfrommetalatleast20cm 2MeasurementfrequencypointsandVSWRvalue 正常状态 R&D,productionandsalesofprofessionalwirelessterminalantenna 四、Anechoicchamber Introduction: Microwavedarkroomandnoreflectionchamber,absorbingshortwavedarkroom darkroom.Microwavedarkroombyelectromagneticshieldingroom,filtering andisolation,groundingdevice,theventilationduct,indoordistributionsystem, monitoringsystem,ceilingwavematerialpart.Itisbasedonthewaveabsorbing materialastheliningoftheshieldroom,itcanabsorbthemostofthe electromagneticenergyintothesixwallisabettersimulationofthefreespace conditions. Themainworkingprincipleofmicrowaveanechoicchamberisaccordingtothe electromagneticwaveinthemediumfromthelowmagneticguidemagnetic directionofpropagationrules,absorbingmaterialstoguidetheelectromagnetic waveusinghighpermeability,throughresonance,asubstantialabsorptionof electromagneticwaveradiationenergy,bycouplingtheelectromagneticenergy intoheatenergy. mainperformance： Frequencyrange:400MHz~6GHzceilingreflectedwavelossmaterials:400MHz~ 6GHzisequaltoormorethan15dB(microwaveabsorbingmaterialbycompositewave absorbingmaterials,namelytaperedcontainingcarbonspongesuctionwavematerial pasteinferrite) R&D,productionandsalesofprofessionalwirelessterminalantenna 五、GaintableofAntenna 无源场型图 R & D, production and sales of professional wireless terminal antenna R & D, production and sales of professional wireless terminal antenna 六、Machine Picture： EUT R & D, production and sales of professional wireless terminal antenna 七、 Matching circuit R&D,productionandsalesofprofessionalwirelessterminalantenna 八、AntennaDimensions R&D,productionandsalesofprofessionalwirelessterminalantenna 九、ROHS: AntennaWJ.05.0000046meetsRoHSrequirements. 十、Productpackaginginstructions: A.packingshouldmeetthemoistureproof,vibration,pressureand mildewproof,etc. B.thesmallestpackingunitlogomusthavethemanufacturer trademarks,productmodel,name,codeandquantity. C.intheattachedpackinglist,certificateofapproval,andthefactory inspectionreport. ***************************END****************************

Report No.: 2590550R-RFUSV01S-A Page: 1 of 15 Appendix A. Test Result of AC Power Line Conducted Emission TX_2.4G Wireless_2440MHz_Line TX_2.4G Wireless_2440MHz_Neutral Report No.: 2590550R-RFUSV01S-A Page: 2 of 15 Appendix B. Test Result of 6dB Bandwidth Modulation Frequency (MHz) 6dB Bandwidth (MHz) Limit (MHz) Result GFSK 2402 1.14 ≧ 0.50 Pass 2440 1.14 ≧ 0.50 Pass 2480 1.15 ≧ 0.50 Pass Report No.: 2590550R-RFUSV01S-A Page: 3 of 15 GFSK/2402MHz/Ch0/Ant.1 GFSK/2440MHz/Ch19/Ant.1 GFSK/2480MHz/Ch39/Ant.1 Report No.: 2590550R-RFUSV01S-A Page: 4 of 15 Appendix C. Test Result of Maximum Peak Conducted Output Power Modulation Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Limit (dBm) Result GFSK 2402 -0.19 30.00 Pass 2440 0.14 30.00 Pass 2480 0.41 30.00 Pass Report No.: 2590550R-RFUSV01S-A Page: 5 of 15 Appendix D. Test Result of Power Spectral Density Modulation Frequency (MHz) Maximum Power Spectral Density (dBm/3kHz) Limit (dBm/3kHz) Result GFSK 2402 -19.37 8.00 Pass 2440 -19.61 8.00 Pass 2480 -19.62 8.00 Pass Report No.: 2590550R-RFUSV01S-A Page: 6 of 15 GFSK/2402MHz/Ch0/Ant.1 GFSK/2440MHz/Ch19/Ant.1 GFSK/2480MHz/Ch39/Ant.1 Report No.: 2590550R-RFUSV01S-A Page: 7 of 15 Appendix E. Test Result of Antenna Port Conducted Emission Modulation Measurement Level Δ (dB) Result GFSK > 20 PA SS Report No.: 2590550R-RFUSV01S-A Page: 8 of 15 GFSK/2402MHz/Ch0/Ant.1 (Ref.) GFSK/2402MHz/Ch0/Ant.1 GFSK/2440MHz/Ch19/Ant.1 (Ref.) GFSK/2440MHz/Ch19/Ant.1 GFSK/2480MHz/Ch39/Ant.1 (Ref.) GFSK/2480MHz/Ch39/Ant.1 Report No.: 2590550R-RFUSV01S-A Page: 9 of 15 GFSK/2402MHz/Ch0/Ant.1(Band Edge) GFSK/2480MHz/Ch39/Ant.1(Band Edge) Report No.: 2590550R-RFUSV01S-A Page: 10 of 15 Appendix F. Test Result of Radiated Emission TX_2.4G Wireless_2402MHz_H TX_2.4G Wireless_2402MHz_V TX_2.4G Wireless_2440MHz_H TX_2.4G Wireless_2440MHz_V Report No.: 2590550R-RFUSV01S-A Page: 11 of 15 TX_2.4G Wireless_2480MHz_H TX_2.4G Wireless_2480MHz_V TX_2.4G Wireless_2440MHz_H_QP TX_2.4G Wireless_2440MHz_V_QP Report No.: 2590550R-RFUSV01S-A Page: 12 of 15 TX_2.4G Wireless_2402MHz_H_Average TX_2.4G Wireless_2402MHz_H_Peak TX_2.4G Wireless_2402MHz_V_Average TX_2.4G Wireless_2402MHz_V_Peak Report No.: 2590550R-RFUSV01S-A Page: 13 of 15 TX_2.4G Wireless_2480MHz_H_Average TX_2.4G Wireless_2480MHz_H_Peak TX_2.4G Wireless_2480MHz_V_Average TX_2.4G Wireless_2480MHz_V_Peak

Report No.: 2590550R-RFUSV01S-B Page: 1 of 15 Appendix A. Test Result of AC Power Line Conducted Emission TX_BLE1M_2440MHz_Line TX_BLE1M_2440MHz_Neutral Report No.: 2590550R-RFUSV01S-B Page: 2 of 15 Appendix B. Test Result of 6dB Bandwidth Modulation Frequency (MHz) 6dB Bandwidth (MHz) Limit (MHz) Result GFSK (1Mbps) 2402 0.70 ≧ 0.50 Pass 2440 0.71 ≧ 0.50 Pass 2480 0.71 ≧ 0.50 Pass Report No.: 2590550R-RFUSV01S-B Page: 3 of 15 GFSK/1MHz/1M/2402MHz/Ch0/Ant.1 GFSK/1MHz/1M/2440MHz/Ch19/Ant.1 GFSK/1MHz/1M/2480MHz/Ch39/Ant.1 Report No.: 2590550R-RFUSV01S-B Page: 4 of 15 Appendix C. Test Result of Maximum Peak Conducted Output Power Modulation Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Limit (dBm) Result GFSK (1Mbps) 2402 -0.16 30.00 Pass 2440 0.14 30.00 Pass 2480 0.44 30.00 Pass Report No.: 2590550R-RFUSV01S-B Page: 5 of 15 Appendix D. Test Result of Power Spectral Density Modulation Frequency (MHz) Maximum Power Spectral Density (dBm/3kHz) Limit (dBm/3kHz) Result GFSK (1Mbps) 2402 -17.64 8.00 Pass 2440 -17.75 8.00 Pass 2480 -17.69 8.00 Pass Report No.: 2590550R-RFUSV01S-B Page: 6 of 15 GFSK/1MHz/1M/2402MHz/Ch0/Ant.1 GFSK/1MHz/1M/2440MHz/Ch19/Ant.1 GFSK/1MHz/1M/2480MHz/Ch39/Ant.1 Report No.: 2590550R-RFUSV01S-B Page: 7 of 15 Appendix E. Test Result of Antenna Port Conducted Emission Modulation Measurement Level Δ (dB) Result GFSK (1 Mbps) > 20 PA SS Report No.: 2590550R-RFUSV01S-B Page: 8 of 15 GFSK/1MHz/1M/2402MHz/Ch0/Ant.1 (Ref.) GFSK/1MHz/1M/2402MHz/Ch0/Ant.1 GFSK/1MHz/1M/2440MHz/Ch19/Ant.1 (Ref.) GFSK/1MHz/1M/2440MHz/Ch19/Ant.1 GFSK/1MHz/1M/2480MHz/Ch39/Ant.1 (Ref.) GFSK/1MHz/1M/2480MHz/Ch39/Ant.1 Report No.: 2590550R-RFUSV01S-B Page: 9 of 15 GFSK/1MHz/1M/2402MHz/Ch0/Ant.1(Band Edge) GFSK/1MHz/1M/2480MHz/Ch39/Ant.1(Band Edge) Report No.: 2590550R-RFUSV01S-B Page: 10 of 15 Appendix F. Test Result of Radiated Emission TX_BLE1M_2402MHz_H TX_BLE1M_2402MHz_V TX_BLE1M_2440MHz_H TX_BLE1M_2440MHz_V Report No.: 2590550R-RFUSV01S-B Page: 11 of 15 TX_BLE1M_2480MHz_H TX_BLE1M_2480MHz_V TX_BLE1M_2440MHz_H_QP TX_BLE1M_2440MHz_V_QP Report No.: 2590550R-RFUSV01S-B Page: 12 of 15 TX_BLE1M_2402MHz_H_Average TX_BLE1M_2402MHz_H_Peak TX_BLE1M_2402MHz_V_Average TX_BLE1M_2402MHz_V_Peak Report No.: 2590550R-RFUSV01S-B Page: 13 of 15 TX_BLE1M_2480MHz_H_Average TX_BLE1M_2480MHz_H_Peak TX_BLE1M_2480MHz_V_Average TX_BLE1M_2480MHz_V_Peak

Report No.: 2590550R-RFUSV01S-A Page: 1 of 21 Test Report No: 2590550R-RFUSV01S-A TEST REPORT FCC Rules & Regulations Product Name MD202 Mouse Brand Name ASUS Model No. MD202 FCC ID MSQ-MS-MD202 Applicant ́s Name / Address ASUSTeK COMPUTER INC. 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer’s Name ASUSTeK COMPUTER INC. Test Method Requested, Standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 Verdict Summary IN COMPLIANCE Documented By Jinn Chen Approved By Steven Tsai Date of Receipt 2025/09/18 Date of Issue 2025/11/13 Report Version V1.0 Report No.: 2590550R-RFUSV01S-A Page: 2 of 21 INDEX page Competences and Guarantees ............................................................................................................................... 4 General Conditions ................................................................................................................................................. 4 Revision History ...................................................................................................................................................... 5 Summary of Test Result .......................................................................................................................................... 6 1. General Information ................................................................................................................................. 7 1.1. EUT Description ...................................................................................................................................... 7 1.2. EUT Information ...................................................................................................................................... 8 1.3. Testing Location Information ................................................................................................................... 8 1.4. Measurement Uncertainty ....................................................................................................................... 9 1.5. List of Test Equipment ........................................................................................................................... 10 2. Test Configuration of EUT ..................................................................................................................... 11 2.1. Test Condition ........................................................................................................................................ 11 2.2. Test Frequency Mode ............................................................................................................................ 11 2.3. Duty Cycle ............................................................................................................................................. 12 2.4. Measurement Configuration .................................................................................................................. 13 2.5. Tested System Details ........................................................................................................................... 14 2.6. Configuration of Tested System ............................................................................................................ 14 2.7. EUT Operating Procedures ................................................................................................................... 14 3. AC Power Line Conducted Emission .................................................................................................... 15 3.1. Test Setup ............................................................................................................................................. 15 3.2. Test Limit ............................................................................................................................................... 15 3.3. Test Procedure ...................................................................................................................................... 15 3.4. Test Result of AC Power Line Conducted Emission ............................................................................. 15 4. 6dB Bandwidth ...................................................................................................................................... 16 4.1. Test Setup ............................................................................................................................................. 16 4.2. Test Limit ............................................................................................................................................... 16 4.3. Test Procedures .................................................................................................................................... 16 4.4. Test Result of 6dB Bandwidth ............................................................................................................... 16 5. Maximum Peak Conducted Output Power ............................................................................................ 17 5.1. Test Setup ............................................................................................................................................. 17 5.2. Test Limit ............................................................................................................................................... 17 5.3. Test Procedures .................................................................................................................................... 17 5.4. Test Result of Maximum Peak Conducted Output Power ..................................................................... 17 6. Power Spectral Density ......................................................................................................................... 18 6.1. Test Setup ................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 2590550R-RFUSV01S-B Page: 1 of 21 Test Report No: 2590550R-RFUSV01S-B TEST REPORT FCC Rules & Regulations Product Name MD202 Mouse Brand Name ASUS Model No. MD202 FCC ID MSQ-MS-MD202 Applicant ́s Name / Address ASUSTeK COMPUTER INC. 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer’s Name ASUSTeK COMPUTER INC. Test Method Requeste…

Text truncated - open the document above for the full version.