MSQ-RTBE7D00BE6800 Dual-band WiFi Router

ASUSTeK Computer Inc. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Designation of U.S. Agent for Service of Process Certification Attestation Letter DATE: 2024/04/03 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Grantee Code: MSQ ATTENTION: FCC Certification – Section 2.911(d)(7) Information ASUSTeK Computer Inc. as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicant’s agent for service of process. Acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Signed: Designated U.S. Agent Signed: Signed:_________________________ Signed:__________________________ Printed name: Jackson Yen Printed name: Steve Chang Title: Associate Vice President Title: President Company Name: ASUSTeK Computer Inc. FRN: 0005821988 Email: [email protected] TEL: +886-2-28943447 FAX: +886-2-28987364 Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Company Name: ASUS Computer International FRN: 0033432428 Email: [email protected] TEL: 510-6084530 FAX: 510-6084555 Address: 48720 Kato Road, Fremont, CA 94538

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Attestation Statements Date: 2024/5/16 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Subject: Attestation Statements Part 2.911(d)(5)(i)-(ii) Filing FCC ID：MSQ-RTBE7D00 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) ASUSTeK COMPUTER INC. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) ASUSTeK COMPUTER INC. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Respectfully, Applicant’s company name : ASUSTeK COMPUTER INC. Applicant’s company address : 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature : Name and Job Title : Jackson Yen / Associate Vice President E-Mail : [email protected] Tel : (886)2-2894-3447 Fax : (886)2-2898-7364

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Power of Attorney Date: 2024/5/16 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Hsinchu Laboratory Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. FCC ID: MSQ-RTBE7D00 Respectfully, Applicant’s company name : ASUSTeK COMPUTER INC. Applicant’s company address : 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature : Name and Job Title : Jackson Yen / Associate Vice President E-Mail : [email protected] Tel : (886)2-2894-3447 Fax : (886)2-2898-7364

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Confidential Letter Date: 2024/5/16 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Subject: Request for Confidentiality FCC ID：MSQ-RTBE7D00 To Whom It May Concern: Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: ● Block Diagrams ● Schematics ● Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: ● External Photos ● Internal Photos ● Test Setup photos ● Users Manuals Respectfully, Applicant’s company name : ASUSTeK COMPUTER INC. Applicant’s company address : 1F., No. 15, Lide Rd., Beitou, Taipei City 112, Taiwan Signature : Name and Job Title : Jackson Yen / Associate Vice President E-Mail : [email protected] Tel : (886)2-2894-3447 Fax : (886)2-2898-7364

Label and location (bottom of the device)

RADIO EXPOSURE TEST REPORT Report No. : FA3N2202-01 TEL : 886-3-656-9065 Page Number : 2 of 12 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ............................................................................................................................. 5 1.1 EUT General Information ....................................................................................................................... 5 1.2 Antenna Information ............................................................................................................................... 6 1.3 Table for Multiple Listing ........................................................................................................................ 8 1.4 Table for EUT support Function ............................................................................................................. 8 1.5 Accessories ............................................................................................................................................ 8 1.6 Applicable Standards ............................................................................................................................. 9 1.7 Testing Location ..................................................................................................................................... 9 2 Maximum Permissible Exposure ...................................................................................................... 10 2.1 Limit of Maximum Permissible Exposure ............................................................................................. 10 2.2 MPE Calculation Method ...................................................................................................................... 10 2.3 MPE Exemption .................................................................................................................................... 11 2.4 Calculated Result and Limit .................................................................................................................. 12 Photographs of EUT v01 RADIO EXPOSURE TEST REPORT Report No. : FA3N2202-01 TEL : 886-3-656-9065 Page Number : 3 of 12 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 History of this test report Report No. Version Description Issued Date FA3N2202-01 01 Initial issue of report Jun. 17, 2024 RADIO EXPOSURE TEST REPORT Report No. : FA3N2202-01 TEL : 886-3-656-9065 Page Number : 4 of 12 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PA SS - Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. 2. The measurement uncertainty please refer to each test result in the chapter "Measurement Uncertainty". Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Reviewed by: Sam Chen Report Producer: Sophia Shiung RADIO EXPOSURE TEST REPORT Report No. : FA3N2202-01 TEL : 886-3-656-9065 Page Number : 5 of 12 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 1 General Description 1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type 2.4GHz WLAN 2400-2483.5 2412-2462 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) VHT: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11be: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM) 5GHz WLAN 5150-5250 5250-5350 5470-5725 5725-5850 5180-5250 5250-5320 5500-5720 5745-5825 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11be: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM) RADIO EXPOSURE TEST REPORT Report No. : FA3N2202-01 TEL : 886-3-656-9065 Page Number : 6 of 12 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 1.2 Antenna Information Set Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 1~3 WALSIN RFDPA141500SBLB807 Di pole Reversed-SMA Note 1 4 INPAQ RFPCA302604IM5B301 PCB I-PEX 2 1~3 W HA YU C660-510490-A Di pole Reversed-SMA 4 W HA YU C660-510579-A PCB I-PEX Note 1: Set Ant. Port Gain (dBi) WLAN 2.4GHz WLAN 5GHz WLAN 2.4GHz WLAN 5GHz UNII 1 UNII 2A UNII 2C UNII 3 1 1 1 4 1.97 1.88 1.88 1.94 1.78 2 2 3 1.97 1.88 1.88 1.94 1.78 3 3 2 1.97 1.88 1.88 1.94 1.78 4 - 1 - 1.99 1.99 1.99 1.99 2 1 1 4 1.95 1.87 1.87 1.93 1.72 2 2 3 1.95 1.87 1.87 1.93 1.72 3 3 2 1.95 1.87 1.87 1.93 1.72 4 - 1 - 1.97 1.97 1.97 1.97 Note 2: Because Set 1 and Set 2 are composed of the same types of antennas, Set 1 with higher gain was selected to test. Note 3: The above information was declared by manufacturer. Note 4: Directional gain information of antenna Set 1 Type Maximum Output Power Power Spectral Density Non-BF Directional gain = Max.gain + array gain. For po…

Text truncated - open the document above for the full version.

RADIO TEST REPORT Report No. : FR3N2202-01AA TEL : 886-3-656-9065 Page Number : 2 of 36 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ............................................................................................................................. 5 1.1 Information .............................................................................................................................................. 5 1.2 Applicable Standards ........................................................................................................................... 10 1.3 Testing Location Information ................................................................................................................ 10 1.4 Measurement Uncertainty .................................................................................................................... 11 2 Test Configuration of EUT ................................................................................................................. 12 2.1 Test Channel Mode .............................................................................................................................. 12 2.2 The Worst Case Measurement Configuration ...................................................................................... 13 2.3 EUT Operation during Test .................................................................................................................. 15 2.4 Accessories .......................................................................................................................................... 15 2.5 Support Equipment ............................................................................................................................... 16 2.6 Test Setup Diagram ............................................................................................................................. 17 3 Transmitter Test Result ..................................................................................................................... 21 3.1 AC Power-line Conducted Emissions .................................................................................................. 21 3.2 DTS Bandwidth..................................................................................................................................... 23 3.3 Maximum Conducted Output Power .................................................................................................... 24 3.4 Power Spectral Density ........................................................................................................................ 26 3.5 Emissions in Non-restricted Frequency Bands .................................................................................... 28 3.6 Emissions in Restricted Frequency Bands ........................................................................................... 29 4 Test Equipment and Calibration Data .............................................................................................. 33 Appendix A. Test Results of AC Power-line Conducted Emissions Appendix B. Test Results of DTS Bandwidth Appendix C. Test Results of Maximum Conducted Output Power Appendix D. Test Results of Power Spectral Density Appendix E. T est Results of Emissions in Non-restricted Frequency Bands Appendix F. Test Results of Emissions in Restricted Frequency Bands Appendix G. Test Results of Radiated Emission Co-location Appendix H. Test Photos Photographs of EUT v01 RADIO TEST REPORT Report No. : FR3N2202-01AA TEL : 886-3-656-9065 Page Number : 3 of 36 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 History of this test report Report No. Version Description Issued Date FR3N2202-01AA 01 Initial issue of report Jun. 17, 2024 RADIO TEST REPORT Report No. : FR3N2202-01AA TEL : 886-3-656-9065 Page Number : 4 of 36 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PA SS - 3.1 15.207 AC Power-line Conducted Emissions PA SS - 3.2 15.247(a) DTS Bandwidth PA SS - 3.3 15.247(b) Maximum Conducted Output Power PA SS - 3.4 15.247(e) Power Spectral Density PA SS - 3.5 15.247(d) Emissions in Non-restricted Frequency Bands PA SS - 3.6 15.247(d) Emissions in Restricted Frequency Bands PA SS - Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. 2. The measurement uncertainty please refer to each test result in the chapter "Measurement Uncertainty". Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Reviewed by: Sam Chen Report Producer: Sophia Shiung RADIO TEST REPORT Report No. : FR3N2202-01AA TEL : 886-3-656-9065 Page Number : 5 of 36 FAX : 886-3-656-9085 Issued Date : Jun. 17, 2024 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 1 General Description 1.1 Information 1.1.1 RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Frequency (MHz) Channel Number 2400-2483.5 b, g, n (HT20), VHT20, ax (HEW20), b…

Text truncated - open the document above for the full version.

4 Specification RF Function Number of ANT Frequency Band Remark WiFi 1 5.15~5.83GHz Requirements of Antenna Design Requirements of Measurement Test Item Specification Remark Return Loss > 10dB Isolation NA Efficiency NA Radiation pattern Scale: +10 ~ -40dBi, Angle step size: 5 degree 8 2D Radiation Pattern Results Y X X Z Y Z (5G) X Z Y Z Y X 10 Results Summary 2D gain Frequency (MHz) 2D Gain Ant1 dB X-Z Y-Z X-Y 5150 1.97 1.02 1.55 5500 1.96 0.97 1.36 5830 1.90 0.90 1.32

4 Specification RF Function Number of ANT Frequency Band Remark WiFi 1 2.4G ~2.5GHz / 5.180~5.825GHz Requirements of Antenna Design Requirements of Measurement Test Item Specification Remark Return Loss > 10dB Isolation NA Efficiency 2.4G> 80% / 5G>70% Radiation pattern Scale: +10 ~ -40dBi, Angle step size: 5 degree 9 2D Radiation Pattern Results Y X X Z Y Z Dipole(2G)_ANT1 X Z Y Z Y X 10 2D Radiation Pattern Results Y X X Z Y Z Dipole(5G)_ANT1 X Z Y Z Y X 12 Results Summary 2D gain Frequency (MHz) 2D Gain Ant1 dB X-Z Y-Z X-Y 2400 1.70 0.47 1.79 2450 1.90 1.42 1.78 2500 1.95 1.40 1.42 5180 0.73 1.84 1.61 5250 0.35 1.87 1.69 5320 -0.74 1.70 1.09 5500 -4.34 1.93 1.91 5600 -4.73 1.27 1.79 5700 -2.39 0.87 1.72 5745 -1.45 0.83 1.72 5785 -1.07 0.56 1.61 5825 -0.53 0.57 1.69

PCB ANTENNA 5.15~5.85 GHz Working Frequency Halogens Free Product P/N: RFPCA302604IM5B301 Customer： Customer ‘s Part No.： Approval No.： Issue Date： 生產工廠︓江蘇省無錫市錫山經濟開發區安鎮安泰一路81號 Antai No 1 road 81, AnZheng town, Xishan Economic Development Zone, Wuxi City, 214105 JiangSu Province, China INPAQ TECHNOLOGY CO., LTD 2024-05-10 PAGE 1 OF 8 品名：RFPCA302604IM5B301 History List 版本 REV. 修訂者 EDITOR 修訂頁次 PAGE 修訂內容 ITEMS OF CHANGE 申請日期 DATE 生效日期 VALID DATE ECN編號 ECN NO. P0 邱瑩鈺 ALL New drawing release 2022/03/21 According to the date of PLM Release N/A P1 邱瑩鈺 4~13 變更測報 2024/05/08 According to the date of PLM Release N/A INPAQ TECHNOLOGY CO., LTD 2024/5/10 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：邱瑩鈺 CHECKED BY：詹惠雯 DESIGNED BY：夏振恩 APPROVED BY：陳振榮 TITLE：RFPCA302604IM5B301 DOCUMENT SPEC REV. NO. P0 PAGE 2 OF 8 品名：RFPCA302604IM5B301 1. Explanation of part number： RF PCA 3026 04 I M 5 B 3 03 Type Code Product Code PCB Dimension (Unit: mm) Cable Length (unit: cm) Connector Brand Type of Connector Application Project status Wire Diameter Project RF Device PCB Antenna Per 2 digits of length, width e.g.: 1614 Length 160.0mm, Width140.0m m 2 digits for cable length e.g.:20 5G1：Length 17.5cm 5G2：Length 17.5cm 2G1：Length 20.0cm 2G2：Length 13.0cm BT：Length 7.0cm A: N C:MCX D:IPEX III E: IPEX IV F: IPEX A13 H: Hirose I: IPEX M: MMCX S: SMA T: TNC U:MURATA N: None A: Reverse Female B: Reverse Male F: Female M: Male N: None 0: 0GHz 3: 3GHz 6: 6GHz 5: 5GHz A: 2.4GHz ISM band B: GSM 900/1800 dual band G: GPS band L: 2.4/5.X GHz tri-band N: NFC T: LTE band W: WCDMA band B: MP T:During Test X: Pile Run 0:None 1:∅0.81 2:∅1.32 3:∅1.13 4:Low Loss ∅1.13 5:∅0.5 6:RG316 7: ∅1.37 8:RG178 9:Low Loss ∅1.37 01~99 series number 2. Electrical Specification： Item Specification Working Frequency Range 5.15~5.85 GHz Gain 1.99 dBi Return Loss -10dB(Max) VSWR 2 max. Polarization Linear Radiation Pattern Omni-directional Impedance 50 Operation Temperature －20°C ～ ＋65°C INPAQ TECHNOLOGY CO., LTD 2024/5/10 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：邱瑩鈺 CHECKED BY：詹惠雯 DESIGNED BY：夏振恩 APPROVED BY：陳振榮 TITLE：RFPCA302604IM5B301 DOCUMENT SPEC REV. NO. P0 PAGE 5 OF 8 ■RADIATION PATTERN X-Z Plane Phi=0.00deg Gain . dB INPAQ TECHNOLOGY CO., LTD 2024/5/10 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：邱瑩鈺 CHECKED BY：詹惠雯 DESIGNED BY：夏振恩 APPROVED BY：陳振榮 TITLE：RFPCA302604IM5B301 DOCUMENT SPEC REV. NO. P0 PAGE 6 OF 8 Y-Z Plane Phi=90.00deg Gain . dB INPAQ TECHNOLOGY CO., LTD 2024/5/10 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：邱瑩鈺 CHECKED BY：詹惠雯 DESIGNED BY：夏振恩 APPROVED BY：陳振榮 TITLE：RFPCA302604IM5B301 DOCUMENT SPEC REV. NO. P0 PAGE 7 OF 8 X-Y Plane Theta=90.00deg Gain . dB

Approval sheet Page 1 of 17 RFDPA141500SBLB807_V03 May-2024 Dipoie ANTENNA 2.4~2.5 / 5.15~5.85 GHz Working Frequency Halogens Free Product P/N: RFDPA141500SBLB807 Customer： Customer ‘s Part No.： Approval No.： Issue Date： *Contents in this sheet are subject to change without prior notice. 生產工廠︓江蘇省無錫市錫山經濟開發區安鎮安泰一路81號 Antai No 1 road 81, AnZheng town, Xishan Economic Development Zone, Wuxi City, 214105 JiangSu Province, China Approval sheet Page 2 of 17 RFDPA141500SBLB807_V03 May-2024 Version Date Description Author V01 2024 Apr. New Release PIPI V02 2024 Apr. 變更線材顏色由棕色改為黑色 PIPI V03 2024 May. 變更測報 PIPI Approval sheet Page 3 of 17 RFDPA141500SBLB807_V03 May-2024 Antenna Specification ELECTRICAL CHARACTERISTICS Item Specification Working Frequency Range 2.4~2.5 / 5.15~5.85 GHz (Note-1) Gain (Peak) 2.4 GHz @ 1.97 dBi 5 GHz @ 1.94 dBi Return Loss -10dB(Max) VSWR 2 max. Polarization Linear Radiation Pattern Omni-directional Impedance 50 Operation Temperature -20〫C~+65〫C *Note 1. Central Frequency should be defined after customers’ application approval. MATERIAL TABLE Items Description Antenna Cover ABS；Black (無噴漆) Antenna Short Base PC+PBT；Black Connector Reverse SMA Plug；Black Coaxial Cable RG178；Black Up Brass Tube Brass Down Brass Tube Brass Heat Shrink Tube Black Rivet POM；Black Sponge Black ORDERING RULE RF DPA 1415 00 S B L B 8 07 Type Code Product Code Dimension (Unit: mm) Cable Length (unit: cm) Connector Brand Type of Connector Application Project status Wire Diameter Project RF Device DPA: Per 2 digits of length, width e.g.: 2513 Length 255mm, Width 13.00mm 2 digits for cable length e.g.: 13 Cable Length:130mm A: N C:MCX D:IPEX III E: IPEX IV F: IPEX A13 H: Hirose I: IPEX M: MMCX S: SMA T: TNC U:MURATA N: None A: Reverse Female B: Reverse Male F: Female M: Male N: None 0: 0GHz 3: 3GHz 5: 5 GHz 6: 6GHz A: 2.4GHz ISM band B: GSM 900/1800 dual band G: GPS band L: 2.4/5.x GHz tri-band N: NFC T:LTE band W: WCDMA band B: MP T:During Test X: Pile Run 0:None 1:∅0.81 3:∅1.13 6:RG316 7:∅1.37 8:RG178 01~99 series number Approval sheet Page 7 of 17 RFDPA141500SBLB807_V03 May-2024 ■ELECTRICAL CHARACTERISTICS S-Parameter Approval sheet Page 9 of 17 RFDPA141500SBLB807_V03 May-2024 ■RADIATION PATTERN 2400~2500 MHz Phi=0.00deg Gain . dB Approval sheet Page 10 of 17 RFDPA141500SBLB807_V03 May-2024 Phi=90.00deg Gain . dB Approval sheet Page 11 of 17 RFDPA141500SBLB807_V03 May-2024 Theta=90.00deg Gain . dB Approval sheet Page 12 of 17 RFDPA141500SBLB807_V03 May-2024 5180~5700 MHz Phi=0.00deg Gain . dB Approval sheet Page 13 of 17 RFDPA141500SBLB807_V03 May-2024 Phi=90.00deg Gain . dB Approval sheet Page 14 of 17 RFDPA141500SBLB807_V03 May-2024 Theta=90.00deg Gain . dB Approval sheet Page 15 of 17 RFDPA141500SBLB807_V03 May-2024 5745~5825 MHz Phi=0.00deg Gain . dB Approval sheet Page 16 of 17 RFDPA141500SBLB807_V03 May-2024 Phi=90.00deg Gain . dB Approval sheet Page 17 of 17 RFDPA141500SBLB807_V03 May-2024 Theta=90.00deg Gain . dB