MSQ-RTN53ASUS Dual band Wireless N Router

RT-N53 E6780 / First Edition / July 2011 English .................................................................................................................................................3 3 Package contents English RT-N53 Wireless Router Network cable Power adapter Quick Start Guide Support CD (User Manual/utility software) Warranty card Hardware features LAN LED WAN LED 5GHz LED 2.4GHz LED Power LED Stand WPS WAN (Internet) port Power (DC-In) port WPS button Power switch Reset button Wall mounting hole LAN 1~4 ports NOTES: • If any of the items is damaged or missing, contact ASUS for technical inquiries and support. Refer to the ASUS Support Hotline list at the back of this guide. • Keep the original packaging material in case you would need future warranty services such as repair or replacement.  Positioning your wireless router For the best wireless signal transmission between the wireless router and the network devices connected to it, ensure that you: • Place the wireless router in a centralized area for a maximum wireless coverage for the network devices. • Keep the device away from metal obstructions and away from direct sunlight. • Keep the device away from 802.11g or 20MHz only Wi-Fi devices, 2.GHz computer peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal interference or loss. • For the best front-to-rear coverage, place the wireless router in an upright position. • For the best up-and-down coverage, place the wireless router in an inclined position. • Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates. English 5 English Mounting options Mounting to the stand 1. Locate the mounting holes at the bottom of the wireless router. 2. Align and inser t the stand’s mounting hooks to the wireless router’s mounting holes. Dismount from the stand 1. Hold the wireless router with one hand on the upside and the other hand under the stand, ensuring that the I/O ports facing you. 2. Follow the direction of the arrow shown below to apply force and remove the stand. NOTE: It's normal if you hear squeaking while dismounting the RT-N53 from the stand. WPS 6 English Dismount from the wall 1. Hold the edge of the front cover (near the I/O ports). 2. Follow the direction of the arrow shown below to apply force and dismount the RT-N53. 2. Locate the mounting holes at the back of the wireless router. 3. Align and insert the stand’s mounting hooks to the wireless router’s mounting holes. Mounting on the wall 1. Locate the two holes on the stand and secure the stand to the wall with screws. or 7 Before you proceed 1. Unplug and disconnect the wires/cables from your existing modem setup and release your computer’s outmoded IP address. 1. Unplug the AC adapter from the power outlet and disconnect it from your cable/ADSL modem. 2. Disconnect the network cable from your cable/ADSL modem. 3. Reboot your computer (recommended). WARNING! Before disconnecting the wires/cables, ensure that your cable/ADSL modem has been turned off for at least two minutes. If your modem has a backup battery, remove it as well. Modem OFF ! 1 2 3 English 8 3. Using another network cable, connect your modem to your wireless router’s WAN port. . Insert your modem’s AC adapter to the DC-In port and plug it to a power outlet. 1. Insert your wireless router’s AC adapter to the DC-In port and plug it to a power outlet. 2. Using the bundled network cable, connect your computer to your wireless router’s LAN port. 2. Set up your wireless environment. Mo d em W P S 1 2 3 4 IMPORTANT! Ensure that the WAN and LAN LEDs are blinking. 3. Disable some settings on your computer. A. Disable the proxy server, if enabled. B. Set the TCP/IP settings to automatically obtain an IP address. C. Disable the dial-up connection, if enabled. NOTE: For more details on disabling your computer settings, refer to Frequently Asked Questions (FAQs). English  1. Configure your wireless settings via the wireless router ’s web graphics user interface (web GUI). a. Launch your web browser such as Internet Explorer, Firefox, Google Chrome, or Safari. Getting started NOTE: If QIS does not launch automatically, follow these steps to manually launch QIS: • On your web browser, key in http://192.168.1.1. Use the default username admin and password admin to log into the user interface. • Click GO in the Quick Internet Setup field under Internet status in the Network Map page. b. The wireless router’s Quick Internet Setup (QIS) feature automatically detects if your ISP connection type is Dynamic IP, PPPoE, PPTP, L2TP, and Static IP. Key in the necessary information for your connection type. NOTES: • The auto-detection of your ISP connection type takes place when you configure the wireless router for the first time or when your wireless router is reset to its default settings. • If QIS does not detect your Internet connection type, click Skip to manual setting and manually configure your connection settings. IMPORTANT! Obtain the necessary information about your Internet connection type from your Internet Service Provider (ISP). English 10 c. Assign the network name (SSID) and security key for your 2.GHz and 5GHz wireless connection. NOTE: You can assign a network name with up to 32 characters. d. Internet connection and wireless setup are completed. 2.4GHz Wireless Settings Network Name (SSID): Security Key: 5GHz Wireless Settings Network Name (SSID): Security Key: Router Settings Username: Password: IMPORTANT! Keep this information in a secure location. 2. Write down your router’s settings. English 11 English Frequently Asked Questions (FAQs) After following the steps, I still cannot access the wireless router’s web graphics user interface (web GUI) to configure the wireless router settings. A. Disable the proxy server, if enabled. Windows® 7 1. Click Start > Inter…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 7 Adapter: MU12-G120100-A1 Page 8 Adapter: DSA-12G-12 FUS 120120 Page 9

FCC ID： ：： ：MSQ-RTN53 LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label Here

UL Approved--Acrylic Bel Background: Black Word:Pantone cool gray 9C 2011 07 18 WG8005G22 1-ASU(RT-N53) +0/-0.15mm +/-0.3mm 0.238mm Product Label 146000107000J R01 Decide by Vendor ID number Decide by import and export country NOTE: 1.RoHS requirement 2.Printing lnk and material must base on WEEE environment protect standard. 3.The weight about(include liner): XXg 1SVA accton technology CO LTD.GZ 2Accton Joytech CO LTDAC 3Accton Technology CO LTD.None 4Compal Corp.(Kunshan) None Sary (2007/08/20開始在CNC生產皆不用打代碼) 對位線 1 4 6 0 0 0 1 0 7 0 0 0 J R 0 1 X X X Vendor ID Mylar厚度0.188mm

Page 4 Page 5 Page 6

Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 1 RF EXPOSURE REPORT REPORT NO.: SA110718E01 R1 MODEL NO.: RT-N53 FCC ID: MSQ-RTN53 APPLICANT: ASUSTEK Computer Inc. ADDRESS: No.15 Li-Te Rd., Peitou, Taipei 112, Taiwan. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 8 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 2 TABLE OF CONTENTS RELEASE CONTROL RECORD....................................................................................3 1. CERTIFICATION......................................................................................................4 2. RF EXPOSURE LIMIT..............................................................................................5 3. MPE CALCULATION FORMULA.............................................................................5 4. CLASSIFICATION....................................................................................................5 5. ANTENNA GAIN.......................................................................................................5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER...........................6 Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA110718E01 Original release Aug. 19, 2011 SA110718E01 R1 Modified the maximum peak output power test Sep. 15, 2011 Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 4 1. CERTIFICATION PRODUCT: ASUS Dual band Wireless N Router BRAND NAME: ASUS MODEL NO.: RT-N53 TEST SAMPLE: R&D SAMPLE APPLICANT: ASUSTEK Computer Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: RT-N53) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Sep. 15, 2011 ( Claire Kuan, Specialist ) APPROVED BY : , DATE: Sep. 15, 2011 ( May Chen, Deputy Manager ) Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 5 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN There are two antennas provided to this EUT, please refer to the following table: Transmitter Circuit Brand Antenna Type 2.4G Gain (dBi) Net gain 2.4G (dBi) Cable loss 5G Gain (dBi) Net gain Antenna Connector Chain (0) Arcadyan PCB Printed 1.44 1.2 3.53 NA Chain (1) Arcadyan PCB Printed 3.55 2 4.52 NA The EUT incorporates CDD function with 802.11a, 802.11g. Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 15.247(2.4GHz): 802.11b: FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 151.4 1.44 20 0.0419 1.00 802.11g: FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 649.9 5.6 20 0.469 1.00 Directional gain = 10 log[(10 G1/20 + 10 G2/20 ) 2 / 2] Effective Legacy Gain (dBi)=5.6 802.11n(20MHz): FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 656.8 3.55 20 0.2959 1.00 802.11n(40MHz): FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2422-2452 449.6 3.55 20 0.202 1.00 Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 7 For 15.247(5GHz): 802.11a: FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745 ~ 5825 335.8 7 20 0.335 1.00 Directional gain = 10 log[(10 G1/20 + 10 G2/20 ) 2 / 2] Effective Legacy Gain (dBi)=7 802.11n(20MHz): FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5745 ~ 5825 335.8 4.52 20 0.189 1.00 802.11n(40MHz): FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 5755 ~ 5795 335.8 4.52 20 0.189 1.00 Report No.: SA110718E01 R1 Report Format Version 4.0.0 Cancels and replaces the r…

Text truncated - open the document above for the full version.

Report No.: RF110718E01 R1 1 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01 dated Aug. 19, 2011 FCC TEST REPORT (15.247) REPORT NO.: RF110718E01 R1 MODEL NO.: RT-N53 FCC ID: MSQ-RTN53 RECEIVED: July 18, 2011 TESTED: July 19 to Sep. 07, 2011 ISSUED: Sep. 15, 2011 APPLICANT: ASUSTEK Computer Inc. ADDRESS: No.15 Li-Te Rd., Peitou, Taipei 112, Taiwan. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 123 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110718E01 R1 2 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01 dated Aug. 19, 2011 Table of Contents RELEASE CONTROL RECORD..............................................................................5 1. CERTIFICATION...........................................................................................6 2. SUMMARY OF TEST RESULTS...................................................................7 2.1 MEASUREMENT UNCERTAINTY................................................................9 3. GENERAL INFORMATION.........................................................................10 3.1 GENERAL DESCRIPTION OF EUT............................................................10 3.2 DESCRIPTION OF TEST MODES..............................................................13 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..............14 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................18 3.4 DESCRIPTION OF SUPPORT UNITS........................................................19 3.5 CONFIGURATION OF SYSTEM UNDER TEST.........................................20 4. TEST TYPES AND RESULTS (For 2400 ~ 2483.5MHz Band)....................21 4.1 CONDUCTED EMISSION MEASUREMENT..............................................21 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................21 4.1.2 TEST INSTRUMENTS................................................................................21 4.1.3 TEST PROCEDURES.................................................................................22 4.1.4 DEVIATION FROM TEST STANDARD.......................................................22 4.1.5 TEST SETUP..............................................................................................23 4.1.6 EUT OPERATING CONDITIONS................................................................23 4.1.7 TEST RESULTS(MODE 1)..........................................................................24 4.1.8 TEST RESULTS(MODE 2)..........................................................................26 4.2 RADIATED EMISSION MEASUREMENT...................................................28 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................28 4.2.2 TEST INSTRUMENTS................................................................................29 4.2.3 TEST PROCEDURES.................................................................................30 4.2.4 DEVIATION FROM TEST STANDARD.......................................................30 4.2.5 TEST SETUP..............................................................................................31 4.2.6 EUT OPERATING CONDITIONS................................................................31 4.2.7 TEST RESULTS..........................................................................................32 4.3 6dB BANDWIDTH MEASUREMENT..........................................................61 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT........................................61 4.3.2 TEST INSTRUMENTS................................................................................61 4.3.3 TEST PROCEDURE...................................................................................61 4.3.4 DEVIATION FROM TEST STANDARD.......................................................61 4.3.5 TEST SETUP..............................................................................................61 4.3.6 EUT OPERATING CONDITIONS................................................................61 4.3.7 TEST RESULTS..........................................................................................62 Report No.: RF110718E01 R1 3 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01 dated Aug. 19, 2011 4.4 MAXIMUM PEAK OUTPUT POWER..........................................................66 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT...........66 4.4.2 INSTRUMENTS..........................................................................................66 4.4.3 TEST PROCEDURES.................................................................................66 4.4.4 DEVIATION FROM TEST STANDARD.......................................................66 4.4.5 TEST SETUP..............................................................................................67 4.4.6 EUT OPERATING CONDITIONS................................................................67 4.4.7 TEST RESULTS..........................................................................................68 4.5 POWER SPECTRAL DENSITY MEASUREMENT......................................70 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT...................70 4.5.2 TEST INSTRUMENTS....…

Text truncated - open the document above for the full version.

Report No.: RF110718E01-1 R1 1 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01-1 dated Aug. 19, 2011 FCC TEST REPORT (15.407) REPORT NO.: RF110718E01-1 R1 MODEL NO.: RT-N53 FCC ID: MSQ-RTN53 RECEIVED: July 18, 2011 TESTED: July 19 to Sep. 07, 2011 ISSUED: Sep. 15, 2011 APPLICANT: ASUSTEK Computer Inc. ADDRESS: No.15 Li-Te Rd., Peitou, Taipei 112, Taiwan. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 78 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110718E01-1 R1 2 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01-1 dated Aug. 19, 2011 Table of Contents RELEASE CONTROL RECORD..............................................................................4 1. CERTIFICATION...........................................................................................5 2. SUMMARY OF TEST RESULTS...................................................................6 2.1 MEASUREMENT UNCERTAINTY.....................................................................7 3. GENERAL INFORMATION...........................................................................8 3.1 GENERAL DESCRIPTION OF EUT..............................................................8 3.2 DESCRIPTION OF TEST MODES..............................................................10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..............11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................14 3.4 DESCRIPTION OF SUPPORT UNITS........................................................15 3.5 CONFIGURATION OF SYSTEM UNDER TEST.........................................16 4. TEST TYPES AND RESULTS.....................................................................17 4.1 CONDUCTED EMISSION MEASUREMENT..............................................17 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................17 4.1.2 TEST INSTRUMENTS................................................................................17 4.1.3 TEST PROCEDURES.................................................................................18 4.1.4 DEVIATION FROM TEST STANDARD.......................................................18 4.1.5 TEST SETUP..............................................................................................19 4.1.6 EUT OPERATING CONDITIONS................................................................19 4.1.7 TEST RESULTS(MODE 1)..........................................................................20 4.1.8 TEST RESULTS(MODE 2)..........................................................................22 4.2 RADIATED EMISSION MEASUREMENT...................................................24 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................24 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS25 4.2.3 TEST INSTRUMENTS................................................................................26 4.2.4 TEST PROCEDURES.................................................................................27 4.2.5 DEVIATION FROM TEST STANDARD.......................................................27 4.2.6 TEST SETUP..............................................................................................28 4.2.7 EUT OPERATING CONDITION..................................................................28 4.2.8 TEST RESULTS..........................................................................................29 4.3 OUTPUT TRANSMIT POWER MEASUREMENT.......................................50 4.3.1 LIMITS OF OUTPUT TRANSMIT POWER MEASUREMENT.....................50 4.3.2 TEST INSTRUMENTS................................................................................50 4.3.3 TEST PROCEDURE...................................................................................50 4.3.4 DEVIATION FROM TEST STANDARD.......................................................50 4.3.5 TEST SETUP..............................................................................................51 4.3.6 EUT OPERATING CONDITIONS................................................................51 4.3.7 TEST RESULTS..........................................................................................52 4.4 PEAK POWER EXCURSION MEASUREMENT.........................................58 4.4.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT.......................58 4.4.2 TEST INSTRUMENTS................................................................................58 4.4.3 TEST PROCEDURE...................................................................................58 4.4.4 DEVIATION FROM TEST STANDARD.......................................................58 4.4.5 TEST SETUP..............................................................................................59 4.4.6 EUT OPERATING CONDITIONS................................................................59 4.4.7 TEST RESULTS..........................................................................................60 Report No.: RF110718E01-1 R1 3 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01-1 dated Aug. 19, 2011 4.5 PEAK POWER SPECTRAL DENSITY MEASUREMENT...........................63 4.5.1 LIMITS OF PEAK POWER S…

Text truncated - open the document above for the full version.

Report No.: RF110718E01-2 R1 1 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01-2 dated Aug. 26, 2011 Supplemental “Transmit Simultaneously” Test Report REPORT NO.: RF110718E01-2 R1 MODEL NO.: RT-N53 FCC ID: MSQ-RTN53 RECEIVED: July 18, 2011 TESTED: Sep. 15, 2011 ISSUED: Sep. 15, 2011 APPLICANT: ASUSTEK Computer Inc. ADDRESS: No.15 Li-Te Rd., Peitou, Taipei 112, Taiwan. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 25 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110718E01-2 R1 2 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01-2 dated Aug. 26, 2011 Table of Contents RELEASE CONTROL RECORD....................................................................................................3 1. CERTIFICATION...............................................................................................................4 2. SUMMARY OF TEST RESULTS........................................................................................5 2.1 MEASUREMENT UNCERTAINTY.....................................................................................5 3. GENERAL INFORMATION................................................................................................6 3.1 GENERAL DESCRIPTION OF EUT...................................................................................6 3.2 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:.......................................9 3.3 DESCRIPTION OF SUPPORT UNITS.............................................................................10 3.4 CONFIGURATION OF SYSTEM UNDER TEST...............................................................11 4. TEST TYPES AND RESULTS..........................................................................................12 4.1 CONDUCTED EMISSION MEASUREMENT....................................................................12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..................................................12 4.1.2 TEST INSTRUMENTS.....................................................................................................12 4.1.3 TEST PROCEDURES.....................................................................................................13 4.1.4 DEVIATION FROM TEST STANDARD.............................................................................13 4.1.5 TEST SETUP..................................................................................................................14 4.1.6 EUT OPERATING CONDITIONS.....................................................................................14 4.1.7 TEST RESULTS..............................................................................................................15 4.2 RADIATED EMISSION MEASUREMENT.........................................................................19 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.......................................................19 4.2.2 TEST INSTRUMENTS.....................................................................................................20 4.2.3 TEST PROCEDURES.....................................................................................................21 4.2.4 DEVIATION FROM TEST STANDARD.............................................................................21 4.2.5 TEST SETUP..................................................................................................................22 4.2.6 EUT OPERATING CONDITIONS.....................................................................................22 4.2.7 TEST RESULTS..............................................................................................................23 4. INFORMATION ON THE TESTING LABORATORIES...............................................................25 Report No.: RF110718E01-2 R1 3 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01-2 dated Aug. 26, 2011 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF110718E01-2 Original release Aug. 26, 2011 RF110718E01-2 R1 Modified the section 3.1 maximum output power. Sep. 15, 2011 Report No.: RF110718E01-2 R1 4 Report Format Version 4.0.0 Cancels and replaces the report No.: RF110718E01-2 dated Aug. 26, 2011 1. CERTIFICATION PRODUCT : ASUS Dual band Wireless N Router BRAND NAME : ASUS MODEL NO. : RT-N53 TEST ITEM: R&D SAMPLE APPLICANT : ASUSTEK Computer In…

Text truncated - open the document above for the full version.