MSQAAM6KBDBXWIRELESS ADSL 2+ BONDED CPE

Zhone Bonded Channel User Manual Version 1.1 Version Date: February 16, 2007 Document #: BD-ZU0007-11 FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: －Reorient or relocate the receiving antenna. －Increase the separation between the equipment and receiver. －Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. －Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter Safety Information To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to , EN50392 and EN 60950-1 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility – Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient. Effective use of the radio spectrum – Article 3.2 Testing for radio test suites according to EN 300 328 has been conducted. These are considered relevant and sufficient. CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures . 2 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 Table of Contents GENERAL INFORMATION.......................................................................... 4 Package Contents........................................................................ 4 Important Safety Instructions.......................................................... 4 Front Panel View......................................................................... 5 Back Panel View.......................................................................... 6 INSTALLING THE ROUTER......................................................................... 7 Connect the ADSL Line and Telephone............................................... 7 Connect the PC to the Router......................................................... 7 Connect the Power Adapter............................................................ 7 INSTALLATION DIAGRAM.......................................................................... 8 MOUNTING THE UNIT............................................................................ 9 CONFIGURING YOUR COMPUTER................................................................10 Windows 2000............................................................................10 Windows XP..............................................................................11 LOG IN TO THE ROUTER.........................................................................12 DEVICE INFO....................................................................................13 Summary..................................................................................13 WAN.......................................................................................14 STATISTICS...............................................................................15 LAN Statistics.........................................................................15 WAN Statistics........................................................................15 ATM Statistics........................................................................16 ADSL Statistics.......................................................................17 ADSL BER Test........................................................................17 Route......................................................................................19 ARP (Address Resolution Protocol)...................................................19 DHCP (Dynamic Host Configuration Protocol)......................................20 QUICK SETUP...................................................................................21 ATM PVC Configuration.............................................................21 ADVANCED SETUP...............................................................................26 WAN.......................................................................................26 Connection Type.....................................................................27 LAN…

Text truncated - open the document above for the full version.

Queue Config To add or remove a QoS queue, click on the corresponding Add or Remove button. Click on Save / Reboot after removing a selection. The QoS queue configured here will apply to incoming IP packets. Items that need to be configured include the following— • Queue configuration status— select disable or enable • Queue— select Null or leave blank • Queue precedence— select integers 1, 2, or 3 QoS Classification You can configure the Quality of Service to apply different priorities to traffic on the router. Click on Add to view the Add Network Traffic Class Rule screen. 42 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 The following screen allows you to add a network traffic class rule. 43 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 Routing Default Gateway You can enable automatic assigned default gateway on the Routing – Default Gateway screen. As default, the box is checked for automatic assigned default gateway to be enabled. Click the Save / Apply button to enable or disable this feature. If automatic assigned default gateway is not selected, then enter the preferred default gateway IP address or select the interface. 44 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 Static Route Use the Routing – Static Route screen to add a static route to the routing table. Enter the route information and click on Save/Apply. No reboot is required. 45 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 RIP If RIP is enabled, the router operation can be configured as active or passive. DNS DNS Server Use the DNS Server screen to request automatic assignment of a DNS or to specify a primary and secondary DNS. 46 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 If the automatic assigned DNS checkbox is not selected, then enter the primary and secondary DNS Server IP addresses as illustrated below. Dynamic DNS Dynamic DNS (D-DNS) allows you to have your own permanent domain name linked to your dynamic IP address. To configure a dynamic DNS, click on Add. If you have already created a dynamic DNS that you want to delete, click on Remove. 47 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 The below screen allows you to set up the Dynamic DNS provider. Note that you will have to first register at the Dynamic DNS site that you wish to use. Select from either DynDNS.org or TZO. Then enter the hostname and the interface that you want to establish the D-DNS address to. Enter the username / password for the D-DNS account that you have signed up for and then click on Save / Apply. ADSL There are three major items in the ADSL settings: Modulation Methods Six modulation methods for different linking speed are supported by the 6211 ADSL router: G.Dmt Enabled, G.lite Enabled, T1.413 Enabled, ADSL Enabled, Annex L Enabled, and ADSL2+ Enabled. Set this value only as directed by your ISP. Capability Do not change these settings unless directed by your ISP. 48 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 DSL Advanced Settings The test mode can be selected from the DSL Advanced Settings page. Test modes are as follows— • Normal • Reverb • Medley • No retrain • L3 49 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 Tone Settings The frequency band of ADSL is split up into 256 separate tones, each spaced 4.3125 kHz apart. With each tone carrying separate data, the technique operates as if 256 separate modems were running in parallel. The tone range is from 0 to 31 for upstream and from 32 to 255 for downstream. Do not change these settings unless instructed by your ISP. 50 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 Port Mapping Port mapping is a feature that allows you to open ports to allow certain Internet applications on the WAN side to pass through the firewall and enter your LAN. To use this feature, mapping groups should be created. Click on the Add button as displayed below. If you need to edit an entry, then click on the Edit button. After clicking the Add button, the below configuration screen appears, allowing you enter the groups and the interfaces they are associated with. 51 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 52 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 Wireless This section allows you to configure wireless settings on your router. Basic The below Wireless—Basic screen lets you enable or disable wireless. The default setting for wireless is enabled. You can also hide the access point so others cannot see your ID on the network. Security The next screen is the Wireless – Security screen which allows you to select the network authentication method and to enable or disable WEP encryption. Note that depending on the network authentication that is selected, the screen will change accordingly so additional fields can be configured for the specific authentication method. Network authentication methods include the following— • Open—anyone can access the network. The default is a disabled WEP encryption setting. • Shared—WEP encryption is enabled and encryption key strength of 64-bit or 128-bit needs to be selected. Click on Set Encryption Keys to manually set the network encryption keys. Up to 4 different keys can be set and you can come back to select which one to use at anytime. 53 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 54 Zhone Bonded Channel User Manual Version 1.1 Document #: BD-ZU0007-11 • 802.1X—requires mutual authentication between a client station and the router by including a RADIUS-based authentication server. Information about the RADIUS server such as its IP address, port and key must be entered. WEP encryption is also enabled and the encryption strength must also be selected. • WPA—(Wi-Fi Protected Access)— usually used for the larger Enterprise environment, it uses a RADIUS server and TKIP (Temporal K…

Text truncated - open the document above for the full version.

ASUSTeK COMPUTER INC. Tel : +886-2-28943447 Fax : +886-2-28950114 www.asus.com Request for Confidentiality Federal Communications Commission Authorization and Evaluation Division Subject: : Confidentiality Request regarding application for certification of FCC ID: MSQAAM6KBDBX Dear Madam or Sir: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: z Schematics - AAM6XXXBD-BX Schem.pdf z Part List - AAM6XXXBD-BX ParLst.pdf z Block diagram - AAM6XXXBD-BX BlkDia.pdf z Operational description - AAM6XXXBD-BX OpDes.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA 04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: z External Photos - AAM6XXXBD-BX ExtPho.pdf z Internal Photos - AAM6XXXBD-BX IntPho.pdf z Test Setup Photos - AAM6XXXBD-BX Tsup.pdf z User’s Manual - AAM6XXXBD-BX UserMan.pdf Sincerely, Lawrence Yu / Manager, ASUSTek Computer Inc.

External Photos of ETU --------------------------------------------------------------- 1/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 External Photos of ETU --------------------------------------------------------------- 2/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 External Photos of ETU --------------------------------------------------------------- 3/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Power Adapter of EUT ---------------------------------------------------------------- 4/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

LABEL Sample and Location information ------------------------------------------------ 1/1 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 LABEL Position:

The device complies with Part 15 of th e FCC Rules. See instruction manual. This class B digital operation complies with Canada ICS-003.

Internal Photos of EUT ---------------------------------------------------------------- 5/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Internal Photos of EUT ---------------------------------------------------------------- 6/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Internal Photos of EUT ---------------------------------------------------------------- 7/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Internal Photos of EUT ---------------------------------------------------------------- 8/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Internal Photos of EUT ---------------------------------------------------------------- 9/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Internal Photos of EUT ---------------------------------------------------------------- 10/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Internal Photos of EUT ---------------------------------------------------------------- 11/11 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Measurement of Maximum Permissible Exposure ---------------------------------------- 1/3 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Measurement of Maximum Permissible Exposure 1. Foreword In adopt with the Human Exposure IEEE C95.1, and according to the FCC 1.1310. The Maximum Permissible Exposure (MPE) is obligated to measure in order to prove the safety of radiation harmfulness to the human body. The Gain of the antenna used is measured in an Anechoic chamber. The maximum total power to the antenna is to be recorded. By adopting the Friis Transmission Formula and the power gain of the antenna, we can find the distance right away from the product, where the limit of the MPE is. 2. Description of EUT FCC ID : MSQAAM6KBDBX Product Name : Wireless ADSL 2+ Bonded CPE Model Name : AAM6XXXBD-BX, 6228-IX-XXX Frequency Range : 2.412GHz ~ 2.462GHz Channel Spacing : 5MHz Support Channel : 11 Channels Modulation Skill : DBPSK, DQPSK, CCK, OFDM Power Type : Powered by the switching adapter, Manufacture: ENG Model: 3A-181DA12 I/P: 100-240VAC 50/60Hz 0.6A. O/P: 12VDC 1.5A. Primary: 185cm length, non-shielded, no ferrite core Secondary: 200cm length, non-shielded, ferrite core Measurement of Maximum Permissible Exposure ---------------------------------------- 2/3 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 3. Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Filed Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Time |E| 2 , |H| 2 or S (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 100 6 3.0-30 1842/f 4.89/f 900/f 2 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- f/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 100 30 1.34-30 824/f 2.19/f 180/f 2 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/1500 30 1500-100,000 -- -- 1.0 30 [The EUT is tested in transmit and receive modes and in the first, middle and the last channel separately. The following shows only our observation have the greatest emissions.] According to OET BULLETIN 56 Fourth Edition/August 1999, Equation for Predicting RF Fields: Friis Transmission Formula: 2 22 /114.0 )20(4 513.1377.57 4 cmmW R PG S= × == ππ Estimated safe separation: cm PG R742.6 4 513.1377.57 4 = × == ππ Note: "The safe estimated separation that the user must maintain from the antenna is at least 6.5cm" Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) The Numeric gain G of antenna with a gain specified in dB is determined by: G = Log -1 ( dB antenna gain / 10 ) G = Log -1 (1.80 / 10) = 1.513 Measurement of Maximum Permissible Exposure ---------------------------------------- 3/3 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Appendix Antenna Specification SPECIFICATION FOR APPROVAL MANUFACTURERCUSTOMER SIGNATURESIGNATURE APPROVED BY : WHA YU GROUP WHA YU INDUSTRIAL CO., LTD.(HEAD OFFICE) Address: No.326 , Sec 2, Kung Tao 5 Road, Hsin Chu City, Taiwan, R.O.C. TAI HWA ELECTRONC CO., LTD. (CHINA) Address: Pak Ho District , Hiu Street Town, Dong Guan City, Guangdong, China HUA HONG INTERNATIONAL LTD. Rm.1103A,President Commercial Centre,608 Nathan Road,Mong Kok,Kowloon,Hong Kong Tel: + 86-852-27712210 Fax: + 86-852-23843747 SHANGHAI HUA YU ELECTRONIC CO. , LTD. (CHINA) Address:3586 ,Wai Qing Song Road, Qing Pu County, Shanghai China Tel: + 86-21-59741348 + 86-21-59744101~4 Fax: + 86-21-59741347 SU ZHOU AEON TECH CO., LTD. (CHINA) Address:Limin North Road, LiLi Town,LiLi Industrial Park,LinHu Economic Zone Wujiang City,Jiangsu Province,China Tel: + 86-512-63627980 Fax: + 86-512-63627981 Fax: + 86-769-5599376 DATE : Tel:+886-3-5714225(REP.) Fax:+ 886-3-5713853+ 886-3-5723600 Tel: + 86-769-5599375 + 86-769-5912375 W. Y. P/NO.: C660-510130-A REV.: X1 PART NO.: REVISION: CUSTOMER: PART NAME: RF Antenna Cable Assembly Item Page 1.1 2.2 3.3~5 4.6~7 5.8 6.9~50 ............... ... Connector .................. .................. Contents Description .................................... SGS .................. .................................... .................................... .................. .................. Cable Specification 1. Electrical Properties : 1.1 Frequency Range............ 1.2 Impedance .................. 1.3 VSWR ..................... ... 1.4 Return Loss.................. 1.5 Radiation ..................... 1.6 Gain(peak)................... 1.8dBi 1.7 Polarization............... ...Linear Vertical 1.8 Admitted Power............ 2. Physical Properties : 2.1 Cable...........................RG-178 Coaxial Cable 2.2 Antenna Cover............ ...TPE 2.3 Antenna Base............... PC 2.4 Antenna Base............... PBT 2.5 Operating Temp. ......... ...-20 ~ +65 2.6 Storage Temp. ............ ...-30 ~ +75 2.7 Color ........................ .Purple 2.8 Connector.................. ...SMA Plug Reverse 1W 2.4GHz ~ 2.5GHz 50 Nominal 1.92 Max. -10 dB Maximum RF Antenna Cable Assembly Omni-directional 1 2 RF Antenna Assembly P/NO : C660-510130-A SPEC : 2.4GHz 6/5/2006 3 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C660-510059-A-H.nsi 2.400000 GHz2.450000 GHz2.500000 GHz C660-510130-A-H .nsi 4 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C660-510059-A-V.nsi 2.400000 GHz2.450000 GHz2.500000 GHz C660-510130-A-V .nsi 5 6 7 8

Test Report ---------------------------------------------------------------------------------- 1/55 Report No.: A5415060920, FCC Part 15.247 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 MEASUREMENT REPORT of Wireless ADSL 2+ Bonded CPE Applicant : ASUSTek Computer Inc. EUT : Wireless ADSL 2+ Bonded CPE Model No. : AAM6XXXBD-BX, 6228-IX-XXX FCC ID : MSQAAM6KBDBX Tested by : Training Research Co., Ltd. TEL : 886-2-26935155 FAX : 886-2-26934440 No. 255, Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C. Test Report ---------------------------------------------------------------------------------- 2/55 Report No.: A5415060920, FCC Part 15.247 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 CERTIFICATION We here by verify that: The test data, data evaluation, test procedures and equipment configurations shown in this report were made mainly in accordance with the procedures given in ANSI C63.4 (2003) as a reference. All test were conducted by Training Research Co., Ltd., 255 Nanyang Street, Shijr, Taipei Hsien 221, Taiwan, R.O.C. Also, we attest to the accuracy of each. We further submit that the energy emitted by the sample EUT tested as described in the report is in compliance with the technical requirements set forth in the FCC Rules Part 15 Subpart B (Declaration of Conformity) and C Section 15.247. Applicant : ASUSTek Computer Inc. Applicant Address : 4F1., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Product Name : Wireless ADSL 2+ Bonded CPE Model : AAM6XXXBD-BX, 6228-IX-XXX Report No. : A5415060920 Test Date : February 8, 2007 Prepared by: Approved by: Jack Tsai Frank Tsai Conditions of issue : (1) This test report shall not be reproduced except in full, without written approval of TRC. And the test result contained within this report only relate to the sample submitted for testing. (2) This report must not be used by the client to claim product endorsement by NVLAP or any agency of U.S. Government. (3) This test report, measurements made by TRC are traceable to the NIST only Conducted and Radiated Method. Test Report ---------------------------------------------------------------------------------- 3/55 Report No.: A5415060920, FCC Part 15.247 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Federal Communications Commission Declaration of Conformity for the following equipment: Product name : Wireless ADSL 2+ Bonded CPE Trade name : ASUS, Zhone, Paradyne Model name : AAM6XXXBD-BX, 6228-IX-XXX Is herewith confirmed and found to comply with the requirements of CFR 47 part15 Subpart B - Unintentional Radiators regulation. The results of electromagnetic mission evaluation are shown in the report number : A5415060920 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Manufacturer USA local representative Company name: ASUSTeK Computer Inc. To be determined Computer address: 4/F, 150, Li-Te Rd., Peitou, Taipei, Taiwan ZIP / Postal code 112 Contact person: Lawrence Yu Title: Manager Internet e-mail address: [email protected] Tel / Fax: 886-2-28943447 / 886-2-28950113 Test Report ---------------------------------------------------------------------------------- 4/55 Report No.: A5415060920, FCC Part 15.247 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Tables of Contents I. GENERAL ................................................................................................................... 6 1.1 Introduction ......................................................................................................... 6 1.2 Description of EUT ............................................................................................. 6 1.3 Test method ......................................................................................................... 7 1.4 Description of Support Equipment ...................................................................... 8 1.5 Configuration of System Under Test .................................................................. 11 1.6 Verify the Frequency and Channel ..................................................................... 13 1.7 Test Procedure .................................................................................................... 14 1.8 Location of the Test Site .................................................................................... 14 1.9 General Test Condition ...................................................................................... 14 II. Section 15.101(a) : Equipment Authorization of Unintentional Radiators............ 15 III. Section 15.203 : Antenna Requirement..................................................................... 16 IV. Section 15.207 : Power Line Conducted Emissions for AC Powered Units ......... 17 4.1 Test Condition & Setup ...................................................................................... 17 4.2 List of Test Instruments ...................................................................................... 18 4.3 Test Result of Conducted Emissions .................................................................. 19 Standby mode_ UNI ...................................................................................................... 19 IEEE 802.11b TX mode ................................................................................................. 20 IEEE 802.11g TX mode ................................................................................................. 21 V. Section 15.247(a) : Technical Description of the EUT.............................................. 23 VI. Section 15.247(a)(2) : Bandwidth for Direct Sequence System ............................. 24 6.1 Test Condition & Setup .........................…

Text truncated - open the document above for the full version.

Test Setup Photos ------------------------------------------------------------------------ 1/2 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Conducted Test Setup Placement: Front View of the Test Configuration Side View of the Test Configuration Test Setup Photos ------------------------------------------------------------------------ 2/2 Applicant: ASUSTeK Computer Inc. FCC ID: MSQAAM6KBDBX Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Radiated Test Setup Placement: Front View of the Test Configuration Rear View of the Test Configuration