MSQB2100NOTEBOOK P.C.

Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, tran- scribed, stored in a retrieval system, or translated into any language in any form or by any means, except documen- tation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COM- PUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MER- CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIREC- TORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSI- NESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFOR- MATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LI- ABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright © 2003 ASUSTeK COMPUTER INC. All Rights Reserved. Limitation of Liability Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringe- ment under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RE- SELLER IS INFORMED OF THEIR POSSIBILITY. 1 Product Name:Notebook PC Hardware Manual Revision:1 E1660 Release Date:May 2004 Notebook PC Hardware User’s Manual FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Safety Statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that inter- ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the re…

Text truncated - open the document above for the full version.

Intel / WM3B2100 Block Dia g ram for Calexico Sin g le Band 80211b Card Ardon+1.5 BBP MAC miniPCI SA2400 2.45GHz Direct Conversion Radio 40 MHz 22 MHz Delaware CCK BBP Differential I and Q MAX2242 RF PA LOW PASS FILTER DP2T RF SWITCH EPCOS BANDPASS FILTER LNA 6dB PAD 6dB PAD EPCOS BANDPASS FILTER BALUN BALUN EEPROM ISOLATOR Rx Tx LOW PASS FILTER 1.8VA 1.8VD 3.3V 3.3VA 1.8VD 3.3V 2.9VA 3.3VA 3.3VA 3.3V 2.9VA J5 J6

Report No.: 045L096FI Page : 1 of 12 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 045L096FI Page : 2 of 12 Version:1.0 (3) EUT Photo (4) EUT Photo Report No.: 045L096FI Page : 3 of 12 Version:1.0 (5) EUT Photo (6) EUT Photo Report No.: 045L096FI Page : 4 of 12 Version:1.0 (7) EUT Photo (8) EUT Photo

ASUSTek COMPUTER INC. FCC ID.: MSQB2100 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Tel: +886 2 2894-3447 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Notebook P.C. ATIO Model No.: A3400N, A3500N, A3800N, A3F00N, A3400Nc, A3500Nc, A3800Nc, A3F00Nc TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Notebook P.C. Model No.: A3400N, A3500N, A3800N, A3F00N, A3400Nc, A3500Nc, A3800Nc, A3F00Nc F F C C C C I I D D : : M M S S Q Q B B 2 2 1 1 0 0 0 0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

ASUSTek COMPUTER INC. FCC ID.: MSQB2100 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Tel: +886 2 2894-3447 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Notebook P.C. ATIO Model No.: A3400N, A3500N, A3800N, A3F00N, A3400Nc, A3500Nc, A3800Nc, A3F00Nc TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Notebook P.C. Model No.: A3400N, A3500N, A3800N, A3F00N, A3400Nc, A3500Nc, A3800Nc, A3F00Nc F F C C C C I I D D : : M M S S Q Q B B 2 2 1 1 0 0 0 0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Report No.: 045L096FI Page : 5 of 12 Version:1.0 (9) EUT Photo (10) EUT Photo Report No.: 045L096FI Page : 6 of 12 Version:1.0 (11) EUT Photo (12) EUT Photo Report No.: 045L096FI Page : 7 of 12 Version:1.0 (13) EUT Photo (14) EUT Photo Report No.: 045L096FI Page : 8 of 12 Version:1.0 (15) EUT Photo (16) EUT Photo Report No.: 045L096FI Page : 9 of 12 Version:1.0 (17) EUT Photo (18) EUT Photo Report No.: 045L096FI Page : 10 of 12 Version:1.0 (19) EUT Photo (20) EUT Photo Report No.: 045L096FI Page : 11 of 12 Version:1.0 (21) EUT Photo (22) EUT Photo Report No.: 045L096FI Page : 12 of 12 Version:1.0 (23) EUT Photo

Report No. 045L096FI Page: 5 of 64 Version:1.0 1.2. Operational Description EUT is a Notebook P.C. with 11 channels. This device provided four kinds of transmitting speed 1, 2, 5.5 and 11Mbps. The device of RF carrier is DQPSK, DBPSK and CCK (IEEE 802.11b). The device adapts direct sequence spread spectrum modulation. The antenna was Connector provides diversity function to improve the receiving function. This Notebook P.C., compliant with IEEE 802.11b is a high-efficiency Wireless LAN adapter. It allows your computer to connect to a wireless network and to share resources, such as files or printers without being bound to the network wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) radio transmission, the Notebook P.C. Wired Equivalent Protection (WEP) algorithm is used. In addition, its standard compliance ensures that it can communicate with any IEEE 802.11b network. Test Mode: Mode 1: Transmitter 802.11b

Report No. : ES/2004/60001 Page : 1 of 45 TEST REPORT Equipment Under Test : Notebook P.C. Model No. : A3400N,A3500N,A3800N,A3F00N,A3400Nc,A3500Nc, A3800Nc,A3F00Nc FCC ID : MSQB2100 Applicant : ASUSTeK COMPUTER INC. Address of Applicant : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Date of Receipt : 2004.05.27 Date of Test(s) : 2004.06.02-2004.06.03 Date of Issue : 2004.06.07 Standards: FCC OET Bulletin 65 supplement C, ANSI/IEEE C95.1 , C95.3 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan E&E Services or testing done by SGS Taiwan E&E Services in connection with distribution or use of the product described in this report must be approved by SGS Taiwan E&E Services in writing. Tested by : Dikin Yang Date : 2004/06/07 Approved by : Robert Chang Date : 2004/06/07 Report No. : ES/2004/60001 Page : 2 of 45 Contents 1. General Information 1.1 Testing Laboratory 3 1.2 Details of Applicant 3 1.3 Description of EUT(s) 4 1.4 Test Environment 4 1.5 Operation description 4 1.6 Evaluation procedures 5 1.7 The SAR Measurement System 6 1.8 System Components 8 1.9 SAR System Verification 9 1.10 Tissue Simulant Fluid for the Frequency Band 2.4 to 2.5 GHz 10 1.11 Test Standards and Limits 11 2. Instruments List 13 3. Summary of Results 14 4. Measurements 16 Configuration 1 4.1 Back of the LCD panel position, lowest channel 16 4.2 Back of the LCD panel position, middle channel 17 4.3 Back of the LCD panel position, highest channel 18 Configuration 2 4.4 LCD panel position, lowest channel 19 4.5 LCD panel position, middle channel 20 4.6 LCD panel position, highest channel 21 Configuration 3 4.7 Back of the LCD panel position, lowest channel 22 4.8 Back of the LCD panel position, middle channel 23 4.9 Back of the LCD panel position, highest channel 24 Configuration 4 4.10 LCD panel position, lowest channel 25 4.11 LCD panel position, middle channel 26 4.12 LCD panel position, highest channel 27 Configuration 5 4.13 Bottom Side position, lowest channel 28 4.14 Bottom Side position, middle channel 29 4.15 Bottom Side position, highest channel 30 4.16 System Performance Validation 31 APPENDIX 1. Photographs of Test Setup 32 2. Photographs of EUT 36 3. Probe Calibration certificate 39 4. Uncertainty Analysis 43 5. Phantom description 44 6. System Validation from Original equipment supplier 45 Report No. : ES/2004/60001 Page : 3 of 45 1. General Information 1.1 Testing Laboratory SGS Taiwan Ltd. 1F, No. 134, Wukung Road, Wuku industrial zone Taipei county , Taiwan , R.O.C. Telephone : +886-2-2299-3279 Fax : +886-2-2298-2698 Internet : http://www.sgs.com.tw 1.2 Details of Applicant Name : ASUSTeK COMPUTER INC. Address : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. 1.3 Description of EUT(s) Equipment Type Notebook P.C. Test Procedure FCC OET Bulletin 65, Supplement C TX Frequency range 2412-2462 MHz FCC ID MSQB2100 Model No. A3400N,A3500N,A3800N,A3F00N, A3400Nc,A3500Nc,A3800Nc,A3F00Nc Number Of Channel 11 Modulation Direct Sequence Spread Spectrum (DSSS) Transfer Rate 1, 2, 5.5, 11 Mbps Max. SAR Measured 1.34 W/kg Main Auxiliary Antenna Gain -0.3 dB -1.8 dB Antenna Type PIFA I/O Port Mini PCI Power Supply 19Vdc from AC adapter Report No. : ES/2004/60001 Page : 4 of 45 NOTE: 1. The mini PCI card, which brand is Intel and the model name is WM3B2100, is specified to this EUT. 2. The EUT is powered by the following adapter: Brand DELTA Model ADP-65DB Input 100-240Vac 1.5A 50-60Hz Output 19Vdc 3.42A 3. For more detailed features description, please refer to the manufacturer's specifications or User's Manual. 1.4 Test Environment Ambient temperature : 22.0° C Tissue Simulating Liquid : 21.5° C Relative Humidity : 60 % 1.5 Operation Configuration 802.11b Channel Frequency Under Test And Its Conducted Output Power(Peak) 19.18 dBm(2412MHz) 18.11 dBm(2437MHz) 16.84 dBm(2462MHz) Antenna Configuration Internal Antenna Antenna Position The Antennasare located at bothsides of the LCD; the right Antenna is the main antenna, and the left one is the auxiliary. EUT Power Source From The Host Equipment HOST Power Source Fully Charged Battery The following test configurations have been applied in this test report: Main Antenna Configuration 1: The back of the LCD Panel of EUT contact to the flat phantom. The transmitted antenna of the EUT located under the reference point of the flat phantom. (Fig.2) Report No. : ES/2004/60001 Page : 5 of 45 Configuration 2: The LCD panel of EUT contact to the flat phantom. The transmitted antenna of the EUT located under the reference point of the flat phantom. (Fig.3 & Fig.4) Auxiliary Antenna Configuration 3: The back of the LCD Panel of EUT contact to the flat phantom. The transmitted antenna of the EUT located under the reference point of the flat phantom. (Fig.5) Configuration 4: The LCD panel of EUT contact to the flat phantom. The transmitted antenna of the EUT located under the reference point of the flat phantom. (Fig.6) Configuration 5: Bottom face of the EUT is paralleled with flat phantom. Spacing between EUT and phantom - In contact (0 cm). (Fig.7) NOTE: 1. Please reference “APPENDIX 1” for the photos of test configuration. 2. All test Configuration have been complied with the body worn configuration. 3. The Notebook has been installed the controlling software that could control the EUT transmitted channel and power. But that software is just for test softwa…

Text truncated - open the document above for the full version.

Report No. 045L096FI Page: 1 of 64 Version:1.0 Test Report Product Name : Notebook P.C. Model No. : A3400N, A3500N, A3800N, A3F00N, A3400Nc, A3500Nc, A3800Nc, A3F00Nc FCC ID : MSQB2100 Applicant : ASUSTeK COMPUTER INC. Address : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Date of Receipt : May. 14, 2004 Date of Test : May. 20, 2004 Report No. : 045L096FI The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 045L096FI Page: 2 of 64 Version:1.0 Test Report Certification Test Date: May. 20, 2004 Report No. : 045L096FI Test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Product Name : Notebook P.C. Applicant : ASUSTeK COMPUTER INC. Address : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Manufacturer : ASUSTeK COMPUTER INC. Model No. : A3400N, A3500N, A3800N, A3F00N, A3400Nc, A3500Nc, A3800Nc, A3F00Nc Rated Voltage : AC 120V/60Hz Trade Name : ASUS Measurement Standard : FCC CFR Title 47 Part 15 Subpart C: 2003 Measurement Procedure : ANSI C63.4: 2001 Test Result : Complied Documented By : ( Anita Chou ) Tested By : ( Geddy Jeng ) Approved By : ( Gene Chang ) Accredited by NIST (NVLAP) NVLAP Lab Code: 200533-0 Report No. 045L096FI Page: 3 of 64 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................4 1.1. EUT Description............................................................................................................................4 1.2. Operational Description ................................................................................................................5 1.3. Tested System Datails....................................................................................................................6 1.4. Configuration of tested System .....................................................................................................6 1.5. EUT Exercise Software .................................................................................................................6 1.6. Test Facility ...................................................................................................................................7 2. Conducted Emission....................................................................................................................8 2.1. Test Equipment..............................................................................................................................8 2.2. Test Setup ......................................................................................................................................8 2.3. Limits ............................................................................................................................................8 2.4. Test Procedure ...............................................................................................................................9 2.5. Test Result of Conducted Emission.............................................................................................10 3. Peak Power Output ...................................................................................................................16 3.1. Test Equipment............................................................................................................................16 3.2. Test Setup ....................................................................................................................................16 3.3. Limits ..........................................................................................................................................16 3.4. Test Result of Peak Power Output...............................................................................................17 4. Radiated Emission .....................................................................................................................18 4.1. Test Equipment............................................................................................................................18 4.2. Test Setup ....................................................................................................................................18 4.3. Limits ..........................................................................................................................................19 4.4. Test Procedure .............................................................................................................................20 4.5. Test Result of Radiated Emission................................................................................................21 5. Band Edge ..................................................................................................................................27 5.1. Test Equipment............................................................................................................................27 5.2. Test Setup ....................................................................................................................................27 5.3. Limits ..........................................................................................................................................28 5.4. Test Procedure .............................................................................................................................28 5.5. Test Result of Band Edge ............................................................................................................2…

Text truncated - open the document above for the full version.

Report No.: 045L096FI Page : 1 of 3 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 045L096FI Page : 2 of 3 Version:1.0 Front View of Radiated Test Back View of Radiated Test Report No.: 045L096FI Page : 3 of 3 Version:1.0 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)