MSQDSLN12UWireless Home Gateway

User Manual DSL-N12U 11N 300Mbps Wireless ADSL Modem Router DSL-N12U 300M Wireless ADSL Modem Router POWERADSLInternetWireless 123 LAN 4  Copyright © 2011 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Offer to Provide Source Code of Certain Software This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product. Where the applicable license entitles you to the source code of such software and/or other additional data, such data should have been shipped along with this product. You may also download it for free from http://support.asus.com/download. The source code is distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code. ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address [email protected], stating the product and describing the problem (please do NOT send large attachments such as source code archives etc to this email address). E648 First Edition April 011  Table of contents About this guide ....................................................................................4 Chapter 1: Knowing your wireless ADSL router Package contents ..................................................................................7 System requirements ............................................................................7 Before you proceed ...............................................................................7 Hardware features .................................................................................8 Front panel ........................................................................................8 Rear panel .........................................................................................9 Bottom panel ...................................................................................10 Mounting options ..................................................................................11 Chapter 2: Getting started Setting up the wireless router ............................................................13 Using the Quick Internet Setup (QIS) .................................................13 Setting up the wireless ADSL router ...............................................14 Chapter 3: Configuring the network clients Accessing the wireless ADSL router .................................................19 Setting an IP address for wired or wireless clients ..........................19 Chapter 4: Configuring via the web GUI Configuring via the web GUI ...............................................................23 Using the Network Map .......................................................................24 Creating multiple SSID profiles .......................................................5 Managing bandwidth with EzQoS ......................................................26 Upgrading the firmware ......................................................................27 Restoring/Saving/Uploading settings ................................................28 Chapter 5: Installing the utilities Installing the utilities ...........................................................................29 Device Discovery .................................................................................31 Firmware Restoration ..........................................................................32 ADSL Setting Wizard ...........................................................................33 Using ADSL Setting Wizard ............................................................ Setting up your network printer .........................................................40 4 Table of contents About this guide This use…

Text truncated - open the document above for the full version.

Ping_ku V1 Paper / Other RTA7155W-D61(RoHS) Label(安規/認證)1510- V1New 2011/03/21 V2 PART NO. DRAFTER PART NAME MODEL NO. MATERIAL 材質 代號 Product Unit 100.03.21 Notes: 1.供應商： 2.被貼物材質：ABS 3.黏貼位置：機器凹槽 5mm 5mm 7mm 4mm 1mm 3.2mm 4.4mm 0.9mm 1mm 1.8mm ASUS DSL-N12U FCC ID: MSQDSLN12U US: ASUDL01BDSLN12U IC: 3568A-DSLN12U 69 mm 30 mm R 4 mm Model: DSL-N12U300Mbps Wireless ADSL Modem Router

FCC ID: MSQDSLN12U Page 1 of 4 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 FIGURE 1 General Appearance (Cover Remove) FIGURE 2 Cover & Antenna FCC ID: MSQDSLN12U Page 2 of 4 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 FIGURE 3 Main Board (Component View) FIGURE 4 Main Board (Solder View) FCC ID: MSQDSLN12U Page 3 of 4 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 FIGURE 5 Main Board (Remove Shielding) FIGURE 6 Main Board (Crystal Oscillator) FCC ID: MSQDSLN12U Page 4 of 4 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 FIGURE 7 Main Board (Surge Suppressor) FIGURE 8 Main Board (Crystal Oscillator)

IC ID: 3568A-DSLN12U Page 1 of 1 MPE CALCULATIONS Systems operating under the provision of 47 CFR 1.1307(b)(1) shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the FCC guidelines. The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user or nearby persons and can therefore be considered a mobile transmitter per 47 CFR 2.1091(b). The MPE calculation for this exposure is shown below. Using the Antennas with highest output power: The peak radiated output power (EIRP) is calculated as follows: Frequency (GHz) Peak Output Power (dBm) Antenna Gain (dBi) EIRP (P+G) (dBm) EIRP (mw) 2.4 26.94 5.0 31.94 1563.15 EIRP = P + G Where P = Power input to the antenna (mW). G = Power gain of the antenna (dBi) The numeric gain (G) of the antenna with a gain specified in dB is determined by: Frequency (GHz) Antenna Gain (dBi) Numeric Antenna Gain 2.4 5.0 3.16 G = Log-1 (dB antenna gain/10) Power density at the specific separation: Frequency (GHz) Numeric Power Gain of the Antenna (G) Power input to the antenna (P) (mW) Maximum Power Spectral Density S=PG/(4πR 2 ) (mW/cm 2 ) Maximum Power Spectral Density Limit (mW/cm 2 ) 2.4 3.16 494.31 0.31 1.00 S = PG/(4R 2 π) S = Maximum power density (mW/cm 2 ) P = Power input to the antenna (mW). G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna (20cm = limit for MPE) The maximum permissible exposure (MPE) for the general population is 1mW/cm 2 . The power density at 20cm does not exceed the 1mW/cm 2 limit. Therefore, the exposure condition is compliant with FCC rules.

FCC ID: MSQDSLN12U Page 1 of 125 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 APPLICATION FOR CERTIFICATION On Behalf of ASUSTek Computer INC. 300Mbps Wireless ADSL Modem Router Model No. : DSL-N12U Brand : ASUS FCC ID : MSQDSLN12U Prepared for ASUSTek Computer INC. No.15, Li-Te Rd., Peitou, Taipei 112, Taiwan Prepared by Audix Technology (Wujiang) Co., Ltd. EMC Dept. No. 1289 Jiangxing East Road, the Part of Wujiang Economic Development Zone Jiangsu China 215200 Tel : +86-512-63403993 Fax : +86-512-63403339 Report Number ： ACWE-F1105001 Date of Test ： Apr.11~May 31, 2011 Date of Report ： May 31, 2011 FCC ID: MSQDSLN12U Page 2 of 125 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 TABLE OF CONTENTS Description Page TEST REPORT CERTIFICATION .......................................................................................................4 1. SUMMARY OF MEASUREMENTS AND RESULTS .............................................................4 2. GENERAL INFORMATION.......................................................................................................5 2.1. Description of Device (EUT).................................................................................................................. 5 2.2. EUT’s Configuration under Test ............................................................................................................ 6 2.3. Operating Condition of EUT .................................................................................................................. 6 2.4. Description of Test Facility .................................................................................................................... 7 2.5. Measurement Uncertainty....................................................................................................................... 7 2.6. Antenna System ...................................................................................................................................... 7 3. CONDUCTED EMISSION MEASUREMET ............................................................................8 3.1. Test Equipment ....................................................................................................................................... 8 3.2. Block Diagram of Test Setup.................................................................................................................. 8 3.3. Power line Conducted Emission Limit (FCC Part15 section 15.207) .................................................... 8 3.4. Test Procedure ........................................................................................................................................ 9 3.5. Conducted Emission Measurement Results............................................................................................ 9 4. RADIATED EMISSION MEASUREMENT ............................................................................12 4.1. Test Equipment ..................................................................................................................................... 12 4.2. Block Diagram of Test Setup................................................................................................................ 12 4.3. Radiated Emission Limits (FCC Part15 section 15.109(a)(g)) ............................................................. 13 4.4. Radiated Emission Limits (FCC Part15 section 15.209) ...................................................................... 14 4.5. Test Procedure ...................................................................................................................................... 14 4.6. Measurement Results ............................................................................................................................ 15 4.7. For Restricted Bands............................................................................................................................. 21 4.8. Spurious Emission Measurement Results in Band Edge Emission (FCC Part 15, 15.205).................. 32 5. 6 DB BANDWIDTH MEASUREMENT ...................................................................................80 5.1. Test Equipment ..................................................................................................................................... 80 5.2. Block Diagram of Test Setup................................................................................................................ 80 5.3. Specification Limits (§15.247(a)(2)) .................................................................................................... 80 5.4. Test Results........................................................................................................................................... 80 6. MAXIMUM PEAK OUTPUT POWER MEASUREMENT ...................................................90 6.1. Test Equipment ..................................................................................................................................... 90 6.2. Block Diagram of Test Setup................................................................................................................ 90 6.3. Specification Limits (§15.247(b)(3)) .................................................................................................... 90 6.4. Test Results........................................................................................................................................... 90 7. BAND EDGES MEASUREMENT ............................................................................................93 7.1. Test Equipment ..................................................................................................................................... 93 7.2. Block Diagram of Test Setup................................................................................................................ 93 7.3. Spe…

Text truncated - open the document above for the full version.

FCC ID: MSQDSLN12UPage 1 of 5 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 1. PHOTOGRAPHS 1.1. Conducted Emission measurement Front View of Conducted Measurement Side View of Conducted Measurement FCC ID: MSQDSLN12UPage 2 of 5 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 1.2. Radiated Emission measurement 1.2.1. Frequency Range 30MHz~1GHz at 10m Semi-Anechoic Chamber Front View of Radiated Measurement Back View of Radiated Measurement FCC ID: MSQDSLN12UPage 3 of 5 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 1.2.2. Frequency Range Above 1GHz at 10m Semi-Anechoic Chamber For EMC Test For RF Test FCC ID: MSQDSLN12UPage 4 of 5 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 1.3. Photo of Restricted Brand & Band Edge Emission 1.4. Photo of Section 5 ~ 9 FCC ID: MSQDSLN12UPage 5 of 5 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1105001 1.5. Photo of Ping test