MSQG532LNotebook PC

Top View Display panel Keyboard Power button Array microphones Status indicators Capital lock indicator NOTE: • The keyboard’s layout may vary per region or country. The Notebook view may also vary in appearance depending on the Notebook PC model. • Closing the lid when the system is under high load forces your Notebook PC to go into sleep mode to prevent overheating. Touchpad/ Touch numeric keypad I/O ports and slots 2. Lift to open the display panel 3. Press the power button Charge the Notebook PC for 3 hours before using it in battery mode for the first time. Getting started 1. Charge your Notebook PC A. Connect the AC power cord to the AC/DC adapter. B. Connect the DC power connector into your Notebook PC’s power (DC) input port. C. Plug the AC power adapter into a 100V~240V power source. NOTE: The power adapter may vary in appearance, depending on models and your region. IMPORTANT! Use only the bundled power adapter to charge the battery pack and supply power to your Notebook PC. WARNING! Your Notebook PC can get warm to hot while in use or while charging the battery pack. Do not leave your Notebook PC on your lap or near any part of your body to prevent injury from heat. When working on your Notebook PC, do not place it on surfaces that can block the vents. IMPORTANT! • Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the first time. • When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily accessible. • Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU. • Power adapter information: - Input voltage: 100-240Vac - Input frequency: 50-60Hz - Rating output current: 7.5A (150W) / 11.8A (230W) / 14A (280W) - Rating output voltage: 20V / 19.5V / 20V Safety notices for your Notebook PC WARNING! Read the following precautions for your Notebook PC’s battery: • Only ASUS-authorized technicians should remove the battery inside the device (for non-removable battery only). • The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. • Follow the warning labels for your personal safety. • Risk of explosion if battery is replaced by an incorrect type. • Do not dispose of in fire. • Never attempt to short-circuit your Notebook PC’s battery. • Never attempt to disassemble and reassemble the battery (for non-removable battery only). • Discontinue usage if leakage is found. • This battery and its components must be recycled or disposed of properly. • Keep the battery and other small components away from children. CAUTION! • This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F). • Refer to the rating label on the bottom of your Notebook PC and ensure that your power adapter complies with this rating. • The power adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source. More info: E16705 Revised Edition V2 / April 2020 Keystone (on selected models) USB 3.2 Gen 1 portHDMI port Headphone/Headset/Microphone jack USB 3.2 Gen 2 Type-C®/DisplayPort combo port LAN portPower (DC) input port Copyright Information You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, are and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved. Limitation of Liability Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. • La batterie de l’appareil peut présenter un risque d’incendie ou de brûlure si celle-ci est retirée ou désassemblée. • La batterie et ses composants doivent être recyclés de façon appropriée. Avis concernant les batteries remplaçables Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmf…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montagu e Expressway Milpita s, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept – 25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Date: 2020-04-17 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _ ASUSTeK Computer Inc __hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: MSQG532L Product Description: Notebook PC Model: G532L, G532LU, G532LV, G532LW, G532LWS, G512LU, G512LV, G512LW, G512LWS, G512L, GL532LU, GL532LV, GL532LW, GL532LWS, GL512LU, GL512LV, GL512LW, GL512LWS, GL532L, GL512L, G542LU, G542LV, G542LW, G542LWS, GL542LU, GL542LV, GL542LW, GL542LWS, G542L, GL542L Sincerely, _______ Jackson Yen / Associate Vice President ASUSTeK Computer Inc Tel: +886-2-28943447 Fax: +886-2-28987364 E-mail: [email protected] Sinc erely, _______ Jack son n n n n n n n n YeYeYeYeYeYeYeYeYeYen/Associate Vice President

1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Date: 2020-04-13 FCC ID: MSQG532L To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations.  External Photos  Internal Photos  Test Setup Photos  Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, _______ Jackson Yen / Associate Vice President ASUSTeK Computer Inc Tel: +886-2-28943447 Fax: +886-2-28987364 E-mail: [email protected]

1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Date: 2020-04-13 FCC ID: MSQG532L A U T H O R I Z A T I O N L E T T E R To whom it may concern, ASUSTeK Computer Inc hereby authorizes Joanna Hung / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Joanna Hung / Specialist of BV CPS Taoyuan on ASUSTeK Computer Inc’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. Sincerely yours, Best Regards, _______ Jackson Yen / Associate Vice President ASUSTeK Computer Inc Tel: +886-2-28943447 Fax: +886-2-28987364 E-mail: [email protected]

Reference No.: 200131C22 Page 1 of 19 CONSTRUCTION PHOTOS OF EUT Brand: ASUS / Model: G532L/G532LU/G532LV/G532LW/G532LWS/GL532LU/GL532LV/GL532LW/GL532LWS/ GL532L/G542LU/G542LV/G542LW/G542LWS/ G542L The EUT contains following accessory devices. Product Brand Model Description Adapter 1 230W ASUS ADP-230GB B I/P: 100-240Vac, 50-60Hz, 3.2A O/P: 19.5Vdc, 11.8A BSMI: R33030 1.2m shielded DC cable with 1 core 1.8m non-shielded AC cable w/o core Adapter 2 280W ASUS ADP-280BB B I/P: 100-240Vac, 50-60Hz, 3.2A O/P: 20Vdc, 14A BSMI: R33030 1.2m shielded DC cable with 2 core 1.8m non-shielded AC cable w/o core Battery ASUS C41N1731-2 15.4Vdc, 66Wh GPU 1 NVIDIA N18E-G1-B-KC-A1 NVIDIA GB4B256 TU106-727-KC-A1 GPU 2 NVIDIA N18E-G0-A1 NVIDIA GB4B-256 TU116-750-A1 GPU 3 NVIDIA N18E-G1R-MP-A1 NVIDIA GB4B-256 TU106-735-A1 GPU 4 NVIDIA N18E-G2R-A1 NVIDIA GB4B-256 TU104-725-A1 LCD 1 AUO B156HAN12.0 15.6" IPS FHD 300Hz AUO LCD 2 SHARP LQ156M1JW09 15.6" IPS FHD 240Hz Sharp LCD 3 AUO B156HAN13.0 15.6" IPS FHD 120Hz AUO LCD 4 PANDA LM156LF2F01 15.6" IPS FHD 144Hz Panda CPU 1 INTEL INT I5-10300H 2.5G 1440 Pin CPU 2 INTEL INT I7-10750H 2.6G 1440 Pin CPU 3 INTEL INT I7-10875H 2.3G 1440 Pin M.2 SSD 1 INTEL SSDPEKNW010T8 1TB M.2 SSD 2 MICRON MTFDHBA1T0TCK 1TB M.2 SSD 3 INTEL SSDPEKNW512G8 512G M.2 SSD 4 MICRON MTFDHBA512TCK 512G SO-DIMM N/A N/A DDR4, 3200 MHz ( 4G/8G / 16G) Keyboard 1 SUNREX PerKey 302MM BL WOF Keyboard 2 SUNREX 4 Zone RGB 302MM BL WOF Keystone ASUS KEYSTONE -- Main Board ASUS G532LWS MAIN BOARD -- BT/WLAN Module INTEL AX201NGW -- Reference No.: 200131C22 Page 2 of 19 Reference No.: 200131C22 Page 3 of 19 Reference No.: 200131C22 Page 4 of 19 Reference No.: 200131C22 Page 5 of 19 Reference No.: 200131C22 Page 6 of 19 Reference No.: 200131C22 Page 7 of 19 Reference No.: 200131C22 Page 8 of 19 Reference No.: 200131C22 Page 9 of 19 Reference No.: 200131C22 Page 10 of 19 Reference No.: 200131C22 Page 11 of 19 Reference No.: 200131C22 Page 12 of 19 Reference No.: 200131C22 Page 13 of 19 Reference No.: 200131C22 Page 14 of 19 Reference No.: 200131C22 Page 15 of 19 Reference No.: 200131C22 Page 16 of 19 Reference No.: 200131C22 Page 17 of 19 Reference No.: 200131C22 Page 18 of 19 Reference No.: 200131C22 Page 19 of 19

15100-20594000 重慶正永 輪轉 英業達 卷裝 20070000275 初始版本 背噴條碼 廖麗明 20200413 1 2 3 4 設計製作單號圖面修改信息簽章 序 號 15100-20594000 6060B2980301 50#白色PET+霧P 黑底白字     15100-1981C100 25#白色PET+霧PP 背噴條碼 5.2 mm 5.2 mm 重慶正永 黑底白字 輪轉 英業達 卷裝 15100-1981C100 20070000204 初始版本 徐彥 20191227 1 2 3 4 設計製作單號圖面修改信息簽章 序 號 CCAH18LP3520T2 Contains Intel Model:AX201NGW FCC ID:PD9AX201NG IC:1000M-AX201NG 2003-18023 D180131003 15100-1981C100 CCAH18LP3520T2 Contains Intel Model:AX201NGW FCC ID:PD9AX201NG IC:1000M-AX201NG 2003-18023 D180131003 15100-1981C100 CCAH18LP3520T2 Contains Intel Model:AX201NGW FCC ID:PD9AX201NG IC:1000M-AX201NG 2003-18023 D180131003 15100-1981C100      D:18 M:11 Y:19 D:18 M:11 Y:19 LINEAR X X. X mm INCH MODEL DESIGNER MANAGER X. XX DO NOT SCALE DRAWING THIS DRAWING AND SPECIFICATIONS , HEREIN , ARE THE PROPERTY OF INVENTEC CORPORATION AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN WHOLE OR IN PART AS THE BASIS FOR THE MANUFACTURE OR SALE OF ITEMS WITHOUT WRITTEN PERMISSION, COPYRIGHT 2019 INVENTEC CORPORATION . BPS0 REV ISION HIST ORY DESIGNER CHANGE NO. DOC REV DATE dd /mm/yyyy A B THI RD AHGLE PROJECTION NUMBER TITLE FILE NAME DOCUMENT NUMBER SHEET:1OF1SCALE: 1:1 UNIT:mm CORPORATIO N A B A C SIZE CODEREV VER 4 4 3 3 2 2 1 1 INITI AL A - Han Wang Jane Lee G532L LEGEND VARIATIONPART NOREV 6060BXXXXXXXX01 As Shown 70°C 50°C -20°C N/A 90% N/A 72 hrs 72 hrs 72 hrs TimeTemperature Humidity 測試規範 Test Criteria Pass: Adhesive qualities not diminished by any of the testing and peeling off or shrinkage after 72 hours. Fail: Any peeling off or shrinkage. 材 料 Label長寬 Label面材+膠材 Dimension -0.4mm ±0.02mm 公 差 g532l-l-rating_WO 3C_15105-07031000_6060BXXXXXXX G532L RATING LABEL (WO/3C) 6060-BXXXXX-0- AI OPENED WINDOW 40(W) x 20(H)mm R0.5*4 OPENED WINDOW 40(W) x 20(H)mm R0.5*4 NOTE: (1) THE CIRCLE MARK DIMENSION IS THE KEY DIMENSION FOR REFERENCE. (2) PART TO BE PACKAGED TO PREVENT DAMAGED IN SHIPPING AND HANDLING. (3) OTHERS:ACCORDING TO IQC INSPECTION STANDARD OF INVENTEC (IF NOT SPECIFIED). (4) MATERIAL: A: 1.面材 (Code):正永+Lexan 8010 polycarbonate film 2.表面處理 (Code):霧油 3.膠性 : 平膠...or equivalent material.(the material spec as same as Q-Form spec) B.ADHESIVE: 3M-SP7533 C.THICKNESS: 0.125mm D. RAW MATERIAL COLOR: Black (5) INK COLOR: Pantone Cool Gray 7U (6) THERMAL TRANSFER RIBBON:NA (7) MATERIAL AND RIBBON NEED UL CERTIFICATION: Yes, 正永-Material UL Code :CM-100-011) (8) HSF PROPERTY: COMPLY iSupplier SYSTEM HSF PROPERTY ATTRIBUTE UP-TO-DATE VALUE. (9) MUST CHECK WITH INVENTEC TO UPDATE“MANUFACTURE YEAR” AT LEAST 3 MONTHS BEFORE THE NEXT ANNUAL.(內文有製造年份時需定義年份轉換規則) ※ASUS Designation Material: PC G11(0.125mm)+3M7533水膠 Input / 輸入: +20V 14A,280W CAN ICES-3 (B)/NMB-3(B) 5mm 5mm 5mm Made in China / 中國製造 ASUSTek Computer Inc. All rights reserved.CM-5 ICC 15105-07031000 40.0 mm 1.8 mm 0.8 mm 20.0 mm 1.8 mm 1.8 mm 40.0 mm 23.6 mm R0.3mm*4 空白區域無背膠 146.0 mm Model / 型號: G532L Notebook PC / 筆記型電腦 XXX-XXXXXXX

G532L Label definition V4.0 2020.01.14 ( 適用機種 : G532L/G532LU/G532LV/G532LW/G532LWS/ GL532L/GL532LU/GL532LV/GL532LW/GL532LWS/ G542L/G542LU/G542LV/G542LW/G542LWS)

Reference No.: 200131C22 Page 1 of 40 CONSTRUCTION PHOTOS OF EUT Brand: ASUS / Model: G532L/G532LU/G532LV/G532LW/G532LWS/GL532LU/GL532LV/GL532LW/GL532LWS/ GL532L/G542LU/G542LV/G542LW/G542LWS/ G542L The EUT contains following accessory devices. Product Brand Model Description Adapter 1 230W ASUS ADP-230GB B I/P: 100-240Vac, 50-60Hz, 3.2A O/P: 19.5Vdc, 11.8A BSMI: R33030 1.2m shielded DC cable with 1 core 1.8m non-shielded AC cable w/o core Adapter 2 280W ASUS ADP-280BB B I/P: 100-240Vac, 50-60Hz, 3.2A O/P: 20Vdc, 14A BSMI: R33030 1.2m shielded DC cable with 2 core 1.8m non-shielded AC cable w/o core Battery ASUS C41N1731-2 15.4Vdc, 66Wh GPU 1 NVIDIA N18E-G1-B-KC-A1 NVIDIA GB4B256 TU106-727-KC-A1 GPU 2 NVIDIA N18E-G0-A1 NVIDIA GB4B-256 TU116-750-A1 GPU 3 NVIDIA N18E-G1R-MP-A1 NVIDIA GB4B-256 TU106-735-A1 GPU 4 NVIDIA N18E-G2R-A1 NVIDIA GB4B-256 TU104-725-A1 LCD 1 AUO B156HAN12.0 15.6" IPS FHD 300Hz AUO LCD 2 SHARP LQ156M1JW09 15.6" IPS FHD 240Hz Sharp LCD 3 AUO B156HAN13.0 15.6" IPS FHD 120Hz AUO LCD 4 PANDA LM156LF2F01 15.6" IPS FHD 144Hz Panda CPU 1 INTEL INT I5-10300H 2.5G 1440 Pin CPU 2 INTEL INT I7-10750H 2.6G 1440 Pin CPU 3 INTEL INT I7-10875H 2.3G 1440 Pin M.2 SSD 1 INTEL SSDPEKNW010T8 1TB M.2 SSD 2 MICRON MTFDHBA1T0TCK 1TB M.2 SSD 3 INTEL SSDPEKNW512G8 512G M.2 SSD 4 MICRON MTFDHBA512TCK 512G SO-DIMM N/A N/A DDR4, 3200 MHz ( 4G/8G / 16G) Keyboard 1 SUNREX PerKey 302MM BL WOF Keyboard 2 SUNREX 4 Zone RGB 302MM BL WOF Keystone ASUS KEYSTONE -- Main Board ASUS G532LWS MAIN BOARD -- BT/WLAN Module INTEL AX201NGW -- Reference No.: 200131C22 Page 2 of 40 Reference No.: 200131C22 Page 3 of 40 Reference No.: 200131C22 Page 4 of 40 Reference No.: 200131C22 Page 5 of 40 Reference No.: 200131C22 Page 6 of 40 Reference No.: 200131C22 Page 7 of 40 Reference No.: 200131C22 Page 8 of 40 Reference No.: 200131C22 Page 9 of 40 Reference No.: 200131C22 Page 10 of 40 Reference No.: 200131C22 Page 11 of 40 Reference No.: 200131C22 Page 12 of 40 Reference No.: 200131C22 Page 13 of 40 Reference No.: 200131C22 Page 14 of 40 Reference No.: 200131C22 Page 15 of 40 Reference No.: 200131C22 Page 16 of 40 Reference No.: 200131C22 Page 17 of 40 Reference No.: 200131C22 Page 18 of 40 Reference No.: 200131C22 Page 19 of 40 Reference No.: 200131C22 Page 20 of 40

Reference No.: 200131C22 Page 21 of 40 Reference No.: 200131C22 Page 22 of 40 Reference No.: 200131C22 Page 23 of 40 Reference No.: 200131C22 Page 24 of 40 Reference No.: 200131C22 Page 25 of 40 Reference No.: 200131C22 Page 26 of 40 Reference No.: 200131C22 Page 27 of 40 Reference No.: 200131C22 Page 28 of 40 Reference No.: 200131C22 Page 29 of 40 Reference No.: 200131C22 Page 30 of 40 Reference No.: 200131C22 Page 31 of 40 Reference No.: 200131C22 Page 32 of 40 Reference No.: 200131C22 Page 33 of 40 Reference No.: 200131C22 Page 34 of 40 Reference No.: 200131C22 Page 35 of 40 Reference No.: 200131C22 Page 36 of 40 Reference No.: 200131C22 Page 37 of 40 Reference No.: 200131C22 Page 38 of 40 Reference No.: 200131C22 Page 39 of 40 Reference No.: 200131C22 Page 40 of 40

Report No.: RF200131C22 R1 Page No. 1 / 33 Report Format Version: 6.1.1 Cancels and replaces the report no.: RF200131C22 dated on Mar. 31, 2020 FCC Test Report Report No.: RF200131C22 R1 FCC ID: MSQG532L Test Model: G532L Series Model: G532LU/G532LV/G532LW/G532LWS/GL532LU/GL532LV/GL532LW/GL532 LWS/GL532L/G542LU/G542LV/G542LW/G542LWS/ G542L (See section 3.1 for more detail) Received Date: Jan. 31, 2020 Test Date: Mar. 10, 2020 ~ Mar. 25, 2020 Issued Date: Apr. 27, 2020 Applicant: ASUSTek COMPUTER INC. Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200131C22 R1 Page No. 2 / 33 Report Format Version: 6.1.1 Cancels and replaces the report no.: RF200131C22 dated on Mar. 31, 2020 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ........................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................... 5 2.1 Measurement Uncertainty ..................................................................................................................... 5 2.2 Modification Record .............................................................................................................................. 5 3 General Information ................................................................................................................................... 6 3.1 General Description of EUT .................................................................................................................. 6 3.2 Description of Test Modes ..................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................... 7 3.3 Description of Support Units ................................................................................................................. 9 3.3.1 Configuration of System under Test ........................................................................................... 9 3.4 General Description of Applied Standards and references................................................................... 9 4 Test Types and Results ............................................................................................................................ 10 4.1 Radiated Emission Measurement ....................................................................................................... 10 4.1.1 Limits of Radiated Emission Measurement .............................................................................. 10 4.1.2 Test Instruments ........................................................................................................................ 11 4.1.3 Test Procedures ........................................................................................................................ 12 4.1.4 Deviation from Test Standard ................................................................................................... 12 4.1.5 Test Set Up ............................................................................................................................... 13 4.1.6 EUT Operating Conditions ........................................................................................................ 13 4.1.7 Test Results .............................................................................................................................. 14 4.2 Conducted Emission Measurement .................................................................................................... 22 4.2.1 Limits of Conducted Emission Measurement ........................................................................... 22 4.2.2 Test Instruments ....................................................................................................................... 22 4.2.3 Test Procedures ........................................…

Text truncated - open the document above for the full version.

FCC ID: MSQG532L 1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (NFC) FCC ID: MSQG532L 2 RADIATED EMISSION TEST 30MHz~1GHz (NFC) FCC ID: MSQG532L 3 RADIATED EMISSION TEST BELOW 30MHz (NFC)