MSQHT7407NAProArt PZ14 Keyboard

ASUSTeK COMPUTER INC. Certification Application Attestation Statements Date: 3/10/2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) ASUSTeK COMPUTER INC. (“the applicant”) certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) ASUSTeK COMPUTER INC. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ▓ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. Thank you, By: Jackson Yen (Signature2) (Print name) Title: Associate Vice President Company: ASUSTeK Computer Inc Telephone: +886-2-28943447 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters must be placed on appropriate letterhead.

ASUSTeK COMPUTER INC. To: Federal Communications Commission Date: 9/8/2025 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7) (KDB 986446 D01 Covered Equipment) Grantee Code: MSQ ASUSTeK COMPUTER INC. (“the applicant”) as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicant’s agent for service of process. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Sincerely yours, Applicant/Grantee US Agent (Signature) FRN: 0005821988 Company Name: ASUSTeK COMPUTER INC. Contact: Jackson Yen / Associate Vice President Tel: +886-2-28943447 Email: [email protected] Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan (Signature) FRN: 0033432428 Company Name: ASUS COMPUTER INTERNATIONAL Contact: Gigi Liu / President Tel: (510) 608-4530 Email: [email protected] Address: 48720 Kato Road, Fremont, CA 94538, United States

ASUSTeK COMPUTER INC. Declaration of Authorization We Company Name: ASUSTeK COMPUTER INC. Address: 1F, No. 15, Lide Rd. City: Beitou, Taipei 112 State: N/A Country: Taiwan Declare that Name Representative of agent: William Chung / Senior Director Agent Company name: Eurofins E&E Wireless Taiwan Co., Ltd. Address: No. 140-1, Changan Street, Bade District, City: Taoyuan Country: Taiwan Is authorized to apply for Certification of the following product(s) Product Name: ProArt PZ14 Keyboard FCC ID: MSQHT7407NA IC: 3568A-HT7407NA on our behalf This is valid until December 31, 2026, or until FCC and IC certification are completed, whichever comes sooner. Date: 2026/3/10 Contact Person / Title: Jackson Yen/ Associate Vice President Tel.: +886-2-28943447 E-mail: [email protected] Signature:

ASUSTeK COMPUTER INC. Request for Confidentiality Date: March 10, 2026 Subject: Confidentiality Request for: FCC ID: MSQHT7407NA /IC: 3568A-HT7407NA Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☒ Short Term --------------------------- External Photos ☒ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☒ Short Term --------------------------- Test Setup Photos ☒ Short Term ☐ Permanent * 3 User’s Manual ASUSTeK COMPUTER INC. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: of 180 days after approval. Sincerely, By: __________________________ Jackson Yen/Associate Vice President (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

SAR Evaluation Report for FCC Report No.: USSC261276001 Issued Date: Mar. 09, 2026 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 36 Template: v01.14 SAR Evaluation Report for FCC Applicant Name : ASUSTeK COMPUTER INC. Applicant Address : 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Product Name : ProArt PZ14 Keyboard Brand Name : ASUS Model Number : HT7407NA Bluetooth Keyboard FCC ID : MSQHT7407NA Report Number : USSC261276001 Compliant Standards : FCC 47 CFR §2.1093 Sample Received Date : Jan. 20, 2026 Date of Testing : Feb. 23, 2026 Report Issued Date : Mar. 09, 2026 The above equipment has been tested by Eurofins E&E Wireless Taiwan Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Device Under Test (DUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s characteristics under the conditions specified in this report. Note: 1. The test results are valid only for samples provided by customers and under the test conditions described in this report. 2. This report shall not be reproduced except in full, without the written approval of Eurofins E&E Wireless Taiwan Co., Ltd. 3. The relevant information is provided by customers in this test report. According to the correctness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. Approved By： Roy Wu / SAR Technical Director SAR Evaluation Report for FCC Report No.: USSC261276001 Issued Date: Mar. 09, 2026 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 36 Template: v01.14 Table of Contents Revision History ........................................................................................................................................................................... 3 1. Compliance Statement .......................................................................................................................................................... 4 2. Test Regulations .................................................................................................................................................................... 5 2.1. Reference Standard and Guidance .............................................................................................................................. 5 2.2. RF Exposure Limits ...................................................................................................................................................... 6 3. Information of Testing Laboratory ....................................................................................................................................... 7 4. DUT (Device Under Test) Information .................................................................................................................................. 8 4.1. Device Overview .......................................................................................................................................................... 8 5. Measurement System Description ....................................................................................................................................... 9 5.1. SAR Definition .............................................................................................................................................................. 9 5.2. SAR Measurement Setup .......................................................................................................................................... 10 5.3. SAR Test Procedures ................................................................................................................................................. 14 5.4. Incident Power Density Definition ............................................................................................................................... 17 5.5. Incident Power Density Measurement Setup ............................................................................................................. 18 5.6. Incident Power Density Measurement Procedure ...................................................................................................... 21 6. System Verification ............................................................................................................................................................. 24 6.1. SAR Tissue Simulating Liquid Verification .................................................................................................................. 24 6.2. SAR Test System Verification ..................................................................................................................................... 25 7. Test Configurations ............................................................................................................................................................. 26 7.1. Description of Test Position ........................................................................................................................................ 26 7.2. Standalone SAR Test Exclusion Considerations ........................................................................................................ 27 7.3. FCC General Test Procedures ................................................................................................................................... 29 8. RF Output Power Specification and Measurement ........................................................................................................... 30 8.1. Nominal and Maximum Output Power Specifications ................................................................................................. 30 8.2. Measured Conducted Power Results for Bluetooth ...........................................................…

Text truncated - open the document above for the full version.

SAR Evaluation Report for FCC Report No.: USSC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page B1 of B2 Appendix B – System Check Plots SAR Evaluation Report for FCC Report No.: USSC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page B2 of B2 Test Date : 2026-02-23 | Ambient Temp : 21.7 °C | Tissue Temp : 21.2 °C System Performance Check System Performance Check at 2450 MHz Verification Source Properties Manufacturer Model No. Serial No. Input Power [dBm] SPEAG D2450 1087 17.0 Exposure Conditions Phantom Section Group Frequency [MHz] Conversion Factor TSL Permittivity TSL Conductivity [S/m] Flat CW 2450.000 7.18 40.0 1.93 Hardware Setup Phantom Tissue Simulating Liquid Probe | Calibration Date DAE | Calibration Date ELI V8.0 (20deg probe tilt) - 2141 HBBL-600-10000 EX3DV4 - SN7650 | 2025-06-10 DAE4 Sn1669 | 2025-05-19 Measurement Software Version 16.4.0.5005 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 40.0 x 80.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 10.0 x 10.0 5.0 x 5.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.5 Measurement Results Area Scan Zoom Scan psSAR-1g [W/kg] 2.67 2.65 psSAR-10g [W/kg] 1.23 1.25 Power Drift [dB] 0.00 TSL Correction Positive only Positive only

SAR Evaluation Report for FCC Report No.: USSC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page C1 of C2 Appendix C – Highest Test Plots SAR Evaluation Report for FCC Report No.: USSC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page C2 of C2 Test Date : 2026-02-23 | Ambient Temp : 21.7 °C | Tissue Temp : 21.2 °C Test Mode 1_Bluetooth_LE_Top Side of the keyboard_0mm_Ch39_Ant 0 Device Under Test Properties Manufacturer or Brand Model No. or Code Name Sample No. or IMEI DUT Type ASUS HT7407NA Bluetooth Keyboard A005 BT Keyboard Exposure Conditions Phantom Section Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Permittivity TSL Conductivity [S/m] Flat ISM 2.4 GHz Band Bluetooth, 10670 - AAA 2441.000, 39 7.18 40.0 1.92 Hardware Setup Phantom Tissue Simulating Liquid Probe | Calibration Date DAE | Calibration Date ELI V8.0 (20deg probe tilt) - 2141 HBBL-600-10000 EX3DV4 - SN7650 | 2025-06-10 DAE4 Sn1669 | 2025-05-19 Measurement Software Version 16.4.0.5005 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 120.0 x 60.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Graded Grid N/A Yes Grading Ratio N/A 1.4 Measurement Results Area Scan Zoom Scan psSAR-1g [W/kg] 0.139 0.180 psSAR-10g [W/kg] 0.059 0.071 Power Drift [dB] -0.04 TSL Correction Positive only Positive only M2 / M1 [%] 43.7 Dist 3dB Peak [mm] 8.0

SAR Evaluation Report for FCC Report No.: USSC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Appendix D - Calibration Certificate for Probe

SAR Evaluation Report for FCC Report No.: USSC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Appendix E - Calibration Certificate for Dipole

1 Copyright © by Passive System Alliance | All rights reserved. 2 Copyright © by Passive System Alliance | All rights reserved. 3 PZ14 BT Keyboard P r e s e n t e d b y J e f f H u a n g, R F R D D e p a r t m e n t I N PA Q Te c h n o l o g y C o . , L t d . Last updated in 12.22, 2025 Copyright © by Passive System Alliance | All rights reserved. I N PA Q P / N : WA-P-LA-02-337 I N PA Q A d d r e s s : No. 11 , K e yiS t . , Z h u n a nTo w n s h i p , M i a o l i C o u n t y 3 5 0 4 0 2 , Ta i w a n ( R . O . C . ) (佳邦科技/ 3 5 0苗栗縣竹南鎮科義街11號) 4 Outline •Antenna Design History •Requirements Antenna Design Measurement •Antenna Placement & Solution •VSWR •Efficiency & Peak Gain •Matching Circuit •S21 •Conclusions 5 Antenna Design History Released DateVersionRecord Aug. 20th, 20250.0Initial report Aug. 20th, 20250.1Added shift of fake hand and PCB antenna Sept. 5th, 20250.2 Increase the simulation of the antenna’s surrounding environment Sept. 24th, 20250.3 Modify the pattern and change the placement of the fake hand. Nov. 26th, 20250.4 Replace the circuit board. Dec. 19th, 20250.5PCB Update Dec. 22th, 20250.6Add Matching Circuit 6 Requirements Antenna Design Measurement Requirements of Antenna Design RF FunctionNumber of ANTFrequency BandRemark BTPCB Ant2400~2500 MHzPCB 10 VSWR PCBAnt(with hand) 11 Efficiency & Peak Gain Frequency (MHz) PCB Ant(with hand) Efficiency (%) Peak Gain (dBi) 240041.98%1.24 241041.15%1.11 242040.22%1.18 243040.06%1.23 244041.9%1.13 245041.28%1.10 246042.36%1.18 247042.72%1.04 248042.09%0.83 249041.27%0.70 250040.64%0.73 13 S21 14 Conclusions •The VSWR of ANT1 are < 2. •The efficiency of ANT1 are between 40%-42% on 2G. •The peak gain of ANT1 are between 1.34-0.7 dBi. •The current matching uses a series 0-ohm resistor. At 2.45 GHz, the S21 shows a loss of approximately −0.68 dB.After subtracting the additional losses from the extra cable length at both ends, the remaining loss of the transmission line itself is −0.38 dB, which is approximately close to 50 ohms. 15 本資料均屬機密，僅供指定之收件人使用，未經寄件人許可不得揭露、複製或散佈本信件。 This message and any attachments are confidential and may be legally privileged. Any unauthorized review, use or distribution by anyone other than the intended recipient is strictly prohibited. If you are not the intended recipient, please immediately notify the sender, completely delete this documents, and destroy all copies. Your cooperation will be highly appreciated. Thank you

RF Test Report Report No.: USRC261276001 Issued Date: Mar. 04, 2026 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 55 Template : v05.00 RF Test Report Applicant ： ASUSTeK COMPUTER INC. Applicant Address ： 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Product Name ： ProArt PZ14 Keyboard Trade Name ： ASUS Model Number ： HT7407NA Bluetooth Keyboard Applicable Standard ： FCC 47 CFR PART 15 SUBPART C ANSI C63.10:2020 Received Date ： Jan. 20, 2026 Test Period ： Jan. 29, 2026 ~ Feb. 04, 2026 Issued Date ： Mar. 04, 2026 Issued by Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan City, Taiwan (R.O.C.) Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Frequency Range: 9 kHz to 325 GHz Bade test site： Test Firm Registration Number: 226252 Test Firm Designation Number: TW0010 Wugu test site： Test Firm Registration Number: 191812 Test Firm Designation Number: TW0034 Note: 1.The test results are valid only for samples provided by customers and under the test conditions described in this report. 2.This report shall not be reproduced except in full, without the written approval of Eurofins E&E Wireless Taiwan Co., Ltd. 3.The relevant information is provided by customers in this test report. According to the correctness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. RF Test Report Report No.: USRC261276001 Issued Date: Mar. 04, 2026 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 55 Template : v05.00 Revision History Rev. Issued Date Description Revised by 00 Mar. 04, 2026 Initial Issue Rowan Hsieh RF Test Report Report No.: USRC261276001 Issued Date: Mar. 04, 2026 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 55 Template : v05.00 Verification of Compliance Applicant : ASUSTeK COMPUTER INC. Product Name : ProArt PZ14 Keyboard Trade Name : ASUS Model Number : HT7407NA Bluetooth Keyboard FCC ID : MSQHT7407NA Applicable Standard : FCC 47 CFR PART 15 SUBPART C ANSI C63.10:2020 Test Result : Complied Issued By : Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan City, Taiwan (R.O.C.) Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Eurofins E&E Wireless Taiwan Co., Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by Eurofins E&E Wireless Taiwan Co., Ltd. based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved By ： RF Test Report Report No.: USRC261276001 Issued Date: Mar. 04, 2026 Eurofins E&E Wireless Taiwan Co., Ltd. Page 4 of 55 Template : v05.00 TABLE OF CONTENTS 1 General Information ........................................................................................................ 5 1.1. Summary of Test Result ............................................................................................ 5 1.2. Testing Location ........................................................................................................ 6 1.3. Measurement Uncertainty ......................................................................................... 6 1.4. Test Site Environment................................................................................................ 6 2 EUT Description............................................................................................................... 7 3 Test Methodology ............................................................................................................ 9 3.1. Mode of Operation ..................................................................................................... 9 3.2. EUT Test Step ........................................................................................................... 9 3.3. Configuration of Test System Details ....................................................................... 10 3.4. Test Instruments ...................................................................................................... 11 4 Measurement Procedure ............................................................................................... 13 4.1. AC Power Line Conducted Emission Measurement ................................................ 13 4.2. Radiated Emission Measurement ............................................................................ 15 4.3. Maximum Conducted Output Power Measurement ................................................. 19 4.4. 6 dB RF Bandwidth Measurement ........................................................................... 20 4.5. Maximum Power Density Measurement .................................................................. 21 4.6. Out of Band Conducted Emissions Measurement ................................................... 22 4.7. Antenna Measurement ............................................................................................ 22 5 Test Results ................................................................................................................... 23 5.1. Conducted Emission................................................................................................ 23 5.2. Radiated Emission Measurement ............................................................................ 25 5.3. Conducted Test Results ........................................................................................... 55 Appendix A. Test Data Appendix B. Test Plots Appendix C. Test Setup Photographs RF Test Report Report No.: USRC261276001 Issued Date: Mar. 04, 2026 Eurofins E&E Wireless Taiwan Co., Ltd. Pag…

Text truncated - open the document above for the full version.

Appendix A. Test Data BLE 1M24020.1060.62417.0407.6859.398 BLE 2M24020.0670.62410.7629.68114.881 Duty Cycle Band Frequency (MHz) On time (ms) On+off time (ms) Duty cycle (%) Duty Factor (dB) 1/T Minimun VBW (kHz) RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 3 Power Limit dBmWdBmWdBm BLE 1M24026.130.00416.210.004230.008.00 BLE 1M24406.730.00476.810.004830.008.00 BLE 1M24807.170.00527.250.005330.008.00 BLE 2M24026.030.00406.230.004230.008.00 BLE 2M24406.620.00466.830.004830.008.00 BLE 2M24807.070.00517.270.005330.008.00 BLR C224020.090.00100.120.001030.000.00 BLR C224400.200.00100.240.001130.000.00 BLR C224800.290.00110.350.001130.000.00 BLR C824020.110.00100.150.001030.000.00 BLR C824400.210.00100.250.001130.000.00 BLR C824800.310.00110.380.001130.000.00 Note: The relevant measured result has the offset with cable loss already. Maximum Conducted Output Power Measurement Test Mode Frequency (MHz) Test Software Version RF Power setting in Test Software Direct_Test_Mode Peak Power Average Power RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 3 Frequency99 % Occupied Bandwidth6 dB Bandwidth 6 dB Limit (MHz)(MHz)(kHz)(kHz) BLE 1M24021.036563.1≧ 500 BLE 1M24401.036560.4≧ 500 BLE 1M24801.039560.4≧ 500 BLE 2M24022.042865.8≧ 500 BLE 2M24402.044867.9≧ 500 BLE 2M24802.046866.6≧ 500 FrequencyLimit (MHz)(dBm/3 kHz) BLE 1M2402≦ 8 BLE 1M2440≦ 8 BLE 1M2480≦ 8 BLE 2M2402≦ 8 BLE 2M2440≦ 8 BLE 2M2480≦ 8 -9.280 -12.650 6 dB Bandwidth and 99 % Occupied Bandwidth Test mode -11.830 -10.940 Maximum Power Density Measurement Reading (dBm/3 kHz) -10.740 -10.130 Test mode RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 3

RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 13 Appendix B. Test Plots Duty cycle BLE 1M On+off time BLE 2M On+off time RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 13 Out of Band Conducted Spurious Emission BLE 1M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 13 BLE 2M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 4 of 13 Reference level BLE 1M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 5 of 13 BLE 2M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 6 of 13 Conducted Band Edge BLE 1M Low ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 7 of 13 BLE 2M Low ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 8 of 13 6 dB Bandwidth BLE 1M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 9 of 13 BLE 2M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 10 of 13 99 % Occupied Bandwidth BLE 1M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 11 of 13 BLE 2M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 12 of 13 Power Density BLE 1M Low ch Mid ch High ch RF Test Report Report No.: USRC261276001 Eurofins E&E Wireless Taiwan Co., Ltd. Page 13 of 13 BLE 2M Low ch Mid ch High ch