MSQJ3NWM3B2200Notebook PC

LET02 xx -003A INSTRUCTIONS Before Use Read and follow the instructions of this manual to use your Mobile mini note PC correctly. Always read the “Safety Precautions” and “Operation Notes.” Keep this manual and the warranty card for further reference. Thank you for purchasing the JVC MP-X V84 1GB Mobile mini note PC. 2003 VICTOR COMPANY OF JAPAN, LIMITED MP-X V84 1GB Printed in Taiwan0803KHY * IDASS VICTOR COMPANY OF JAPAN, LIMITED Mobile mini note PC · This equipment with RLAN is intended to be used in Germany, UK, Austria and Switzerland.Outdoor use may be restricted to certain frequencies and/or mayrequire a licence for operation. · The built-in V.90 modem is installed for use on official analog telephone lines in Germany, UK, Austria, France and Switzerland. 0197 2 EN It is recommended that you . . . ....read thoroughly the Safety Precautions. They contain extremely important information regarding the safe use of this product. SAFETY PRECAUTIONS NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit. ●The rating information and safety caution of the AC Adapter are on the bottom of the adapter. Dear Customer, Thank you for purchasing this Mobile mini note PC. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Hereby, JVC declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999 / 5 / EC. The modem incorporated in this product was tested according to the standard TBR21. The correct function on a public analogue telephone line and a wireless LAN network is confirmed with the listed cautions. Should you have any problem on a specific network, we kindly ask you to inform your JVC Service Centre the nature of the problem and details of which service provider you are using. WARNING DANGEROUS VOLTAGE INSIDE CAUTIONS: To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel. When you are not using the AC Adapter for a long period of time, it is recommended that you disconnect the power cord from the AC outlet. CAUTION: To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly, and then plug the larger end of the power cord into an AC outlet. IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If, nonetheless, the mains plug is cut off be sure to re- move the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connec- tion to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: IMPORTANT. DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wires in the mains lead on this product are coloured in accordance with the following code: Blue :Neutral Brown :Live As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This unit should be used with 110 – 240 V~, 50/60 Hz only. CAUTION: To prevent electric shocks and fire hazards, do NOT use any other power source. CAUTIONS: ●If used near a radio, this unit may interfere with reception. ●Prevent inflammables, water and metallic objects from entering the unit. ●Do not disassemble or modify the unit. ●Do not apply shocks to the unit. ●Do not subject the unit to direct sunlight. ●Avoid using the unit in extremely hot or humid places. ●Avoid using the unit in places subject to vibrations. EN3 CAUTIONS: ●This Mobile mini note PC is designed to be used with the JVC BN-LS12E/LL22E battery packs and, to recharge them or to supply power to the Mobile mini note PC from an AC outlet, use the provided AC Adapter and Power Cord. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.) When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.) Do not allow the Mobile mini note PC or AC adapter to operate with the base resting directly on anyone’s lap. Allowing sustained contact may cause discomfort or, eventually, a burn. No naked flame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be strictly followed. The apparatus shall not be exposed to dripping or splashing. Do not use this equipment in a bathroom or places with water. Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.) SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet intern…

Text truncated - open the document above for the full version.

55 44 33 22 11 D D C C B B A A Switch KEYBOARDCONTROLLERM3885XHP Power Hublink Montara-GMGMCH 732 uFCBGA LPC, 33MHz CardBus AGTL+1.05V,400MHZ(PSB) HDD_ Conn. 66MHZ RICOHR5C593 2*USB2.0 Conn. ICH4-M 421 BGA CARDBUS/1394 HOST BUS DDR SDRAM 333MHz INTERNALKEYBOARD&TP CRT PORT LCD_CN 3.3V, 33MHz 478 uFCPGA BANIAS/MONTARA-GME BLOCK DIAGRAM P_IDE_BUS USB2.0 Banias ONEPCMCIASLOT PCI_BUS MINI PCI Conn.Type IIIB DVD/CDRWConn. S_IDE_BUS SDSLOT FWH AUDIO AMPAC97ADI 1980 AC LINK LAN RealTek8101L 4 Mbit DDR Micro-SODIMM DIMM 0 DDR Micro-SODIMM DIMM 1 LanConn DebugPort MDC Headphone/Spdif Conn. ATA100 ATA100 VCCA(1.8V)VCCP(1.05) 33-Power/CHARGE32-Power/VCORE34-Power/SYSTEM 3V,5V ,12V 31-DC IN/PWR OK36-Power/1.25V& 1.8V37-Power/PIC16C54/BAT CON40-Power/POWER BLOCK DIAGRAM 39-Power/LOAD SWITCH35-Power/BATLOW/Battery L earn# 38-Power/2.5V/1.5V/1.2V/ 1.05V Page 3,4 Page 5,6,7 Page 24Page 26 Page 29 Page 23 Page 23 Page 11,12,13,14 Page 8 Page 8 Page 24 Page 21Page 22 Page 22 Page 14 Page 20Page 20 Page 25 Page 18 Page 29 Page 15,16Page 17 Page 17 Page 28 Page 19 27-LED,VR10-Clock Gen12-RTC Conn26,CRT and PortReplicator Conn 28-SD CARD,HotKey Conn 30-Reset Circuits Custom 241 星期四 , 二月 05, 2004 ASUSTek COMPUTER INC BLock Diagram 1.1 J3N <OrgAddr1> Size Project Name Rev Date: Sheet of Title : Engineer:

Report No.: 042L059FI Page : 1 of 17 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 042L059FI Page : 2 of 17 Version:1.0 (3) EUT Photo (4) EUT Photo Report No.: 042L059FI Page : 3 of 17 Version:1.0 (5) EUT Photo (6) EUT Photo Report No.: 042L059FI Page : 4 of 17 Version:1.0 (7) EUT Photo (8) EUT Photo

ASUSTek COMPUTER INC. FCC ID.: MSQJ3NWM3B2200 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Tel: +886 2 2894-3447 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Notebook P.C. ATIO Model No.: MP-XV841US TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Notebook P.C. Model No.: MP-XV841US F F C C C C I I D D : : M M S S Q Q J J 3 3 N N W W M M 3 3 B B 2 2 2 2 0 0 0 0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

ASUSTek COMPUTER INC. FCC ID.: MSQJ3NWM3B2200 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Tel: +886 2 2894-3447 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Notebook P.C. ATIO Model No.: MP-XV841US TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Notebook P.C. Model No.: MP-XV841US F F C C C C I I D D : : M M S S Q Q J J 3 3 N N W W M M 3 3 B B 2 2 2 2 0 0 0 0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Report No.: 042L059FI Page : 5 of 17 Version:1.0 (9) EUT Photo (10) EUT Photo Report No.: 042L059FI Page : 6 of 17 Version:1.0 (11) EUT Photo (12) EUT Photo Report No.: 042L059FI Page : 7 of 17 Version:1.0 (13) EUT Photo (14) EUT Photo Report No.: 042L059FI Page : 8 of 17 Version:1.0 (15) EUT Photo (16) EUT Photo Report No.: 042L059FI Page : 9 of 17 Version:1.0 (17) EUT Photo (18) EUT Photo Report No.: 042L059FI Page : 10 of 17 Version:1.0 (19) EUT Photo (20) EUT Photo Report No.: 042L059FI Page : 11 of 17 Version:1.0 (21) EUT Photo (22) EUT Photo Report No.: 042L059FI Page : 12 of 17 Version:1.0 (23) EUT Photo (24) EUT Photo Report No.: 042L059FI Page : 13 of 17 Version:1.0 (25) EUT Photo (26) EUT Photo Report No.: 042L059FI Page : 14 of 17 Version:1.0 (27) EUT Photo (28) EUT Photo Report No.: 042L059FI Page : 15 of 17 Version:1.0 (29) EUT Photo (30) EUT Photo Report No.: 042L059FI Page : 16 of 17 Version:1.0 (31) EUT Photo (32) EUT Photo Report No.: 042L059FI Page : 17 of 17 Version:1.0 (33) EUT Photo

Report No. 042L059FI Page: 5 of 64 Version:1.0 1.2. Operational Description EUT is a Notebook P.C with 11 channels. This device provided four kinds of transmitting speed 1, 2, 5.5 and 11Mbps. The device of RF carrier is DQPSK, DB PSK and CCK (IEEE 802.11b) or eight kinds of transmitting speed 6, 9, 12, 18, 24, 36, 48 and 54Mbps. The device of RF carrier is OFDM (IEEE 802.11g). The device adapts direct sequence spread spectrum modulation. The antenna was Connector provides diversity function to improve the receiving function. This Notebook P.C, compliant with IEEE 802.11b and IEEE 802.11g, is a high-efficiency Wireless LAN adapter. It allows your computer to connect to a wireless network and to share resources, such as files or printers without being bound to the network wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) radio transmission, the Notebook P.C Wired Equivalent Protection (WEP) algorithm is used. In addition, its standard compliance ensures that it can communicate with any IEEE 802.11b and IEEE 802.11g network. Test Mode: Mode 1: Transmitter 802.11b Mode 1: Transmitter 802.11g

Report No. : ES/2004/20004 Page : 1 of 69 TEST REPORT Equipment Under Test : Notebook P.C. Model No. : MP-XV841US FCC ID : MSQJ3NWM3B2200 Applicant : ASUSTeK COMPUTER INC. Address of Applicant : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Date of Receipt : 2004.02.19 Date of Test(s) : 2004.03.01-2004.03.04 Date of Issue : 2004.03.08 Standards: FCC OET Bulletin 65 supplement C, ANSI/IEEE C95.1 , C95.3 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan E&E Services or testing done by SGS Taiwan E&E Services in connection with distribution or use of the product described in this report must be approved by SGS Taiwan E&E Services in writing. Tested by : Dikin Yang Date : 2004/03/04 Approved by : Robert Chang Date : 2004/03/08 Report No. : ES/2004/20004 Page : 2 of 69 Contents 1. General Information 1.1 Testing Laboratory 4 1.2 Details of Applicant 4 1.3 Description of EUT(s) 4 1.4 Test Environment 5 1.5 Operation description 5 1.6 Evaluation procedures 6 1.7 The SAR Measurement System 7 1.8 System Components 9 1.9 SAR System Verification 10 1.10 Tissue Simulant Fluid for the Frequency Band 2.4 to 2.5 GHz 11 1.11 Test Standards and Limits 12 2. Instruments List 14 3. Summary of Results 15 4. Measurements 19 802.11b Configuration 1 4.1.1 Right Side position, lowest channel 19 4.1.2 Right Side position, middle channel 20 4.1.3 Right Side position, highest channel 21 Configuration 2 4.1.4 Back of the LCD panel position, lowest channel 22 4.1.5 Back of the LCD panel position, middle channel 23 4.1.6 Back of the LCD panel position, highest channel 24 Configuration 3 4.1.7 LCD panel position, lowest channel 25 4.1.8 LCD panel position, middle channel 26 4.1.9 LCD panel position, highest channel 27 Configuration 4 4.1.10 Left side position, lowest channel 28 4.1.11 Left Side position, middle channel 29 4.1.12 Left Side position, highest channel 30 Configuration 5 4.1.13 Back of the LCD panel position, lowest channel 31 4.1.14 Back of the LCD panel position, middle channel 32 4.1.15 Back of the LCD panel position, highest channel 33 Configuration 6 4.1.16 LCD panel position, lowest channel 34 4.1.17 LCD panel position, middle channel 35 4.1.18 LCD panel position, highest channel 36 Report No. : ES/2004/20004 Page : 3 of 69 802.11g Configuration 1 4.2.1 Right Side position, lowest channel 37 4.2.2 Right Side position, middle channel 38 4.2.3 Right Side position, highest channel 39 Configuration 2 4.2.4 Back of the LCD panel position, lowest channel 40 4.2.5 Back of the LCD panel position, middle channel 41 4.2.6 Back of the LCD panel position, highest channel 42 Configuration 3 4.2.7 LCD panel position, lowest channel 43 4.2.8 LCD panel position, middle channel 44 4.2.9 LCD panel position, highest channel 45 Configuration 4 4.2.10 Left Side position, lowest channel 46 4.2.11 Left Side position, middle channel 47 4.2.12 Left Side position, highest channel 48 Configuration 5 4.2.13 Back of the LCD panel position, lowest channel 49 4.2.14 Back of the LCD panel position, middle channel 50 4.2.15 Back of the LCD panel position, highest channel 51 Configuration 6 4.2.16 LCD panel position, lowest channel 52 4.2.17 LCD panel position, middle channel 53 4.2.18 LCD panel position, highest channel 54 4.3 System Performance Validation 55 APPENDIX 1. Photographs of Test Setup 56 2. Photographs of EUT 60 3. Probe Calibration certificate 63 4. Uncertainty Analysis 67 5. Phantom description 68 6. System Validation from Original equipment supplier 69 Report No. : ES/2004/20004 Page : 4 of 69 1. General Information 1.1 Testing Laboratory SGS Taiwan Ltd. ( FCC Registration number: 573967 ) 1F, No. 134, Wukung Road, Wuku industrial zone Taipei county , Taiwan , R.O.C. Telephone : +886-2-2299-3279 Fax : +886-2-2298-2698 Internet : http://www.sgs.com.tw 1.2 Details of Applicant Name : ASUSTeK COMPUTER INC. Address : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. 1.3 Description of EUT(s) Equipment Type Notebook P.C. Test Procedure FCC OET Bulletin 65, Supplement C TX Frequency range 2412-2462 MHz FCC ID MSQJ3NWM3B2200 Model No. MP-XV841US Number Of Channel 11 Modulation Direct Sequence Spread Spectrum (DSSS) 802.11b 11 Mbps Transfer Rate 802.11g6 Mbps 802.11b1.29 W/kg Max. SAR Measured 802.11g 0.83 W/kg Antenna Gain 2dB Antenna Type Connector, Printed, Soldered on PCB I/O Port Mini PCI Power Supply 19Vdc from AC adapter Report No. : ES/2004/20004 Page : 5 of 69 NOTE: 1. The mini PCI card, which brand is Intel and the model name is WM3B2200BG, is specified to this EUT. 2. The EUT is powered by the following adapter: Brand DELTA Model ADP-50HH Input 100-240Vac 1.5A 50-60Hz Output 19Vdc 2.64A 3. For more detailed features description, please refer to the manufacturer's specifications or User's Manual. 1.4 Test Environment Ambient temperature : 22.1° C Tissue Simulating Liquid : 21.6° C Relative Humidity : 50 % 1.5 Operation Configuration 802.11b 802.11g Channel Frequency Under Test And Its Conducted Output Power 20.77 dBm(2412MHz) 19.65 dBm 2437MHz) 19.47dBm(2462MHz) 18.29 dBm(2412MHz) 18.05 dBm 2437MHz) 17.83 dBm(2462MHz) Antenna Configuration Internal Antenna Antenna Position The Antennas are located at both sides of the LCD; the right Antenna is the main antenna, and the left one is the auxiliary. EUT Power Source From The Host Equipment HOST Power Source Fully Charged Battery The following test con…

Text truncated - open the document above for the full version.

Report No. 042L059FI Page: 1 of 64 Version:1.0 Test Report Product Name : Notebook P.C Model No. : MP-XV841US FCC ID : MSQJ3NWM3B2200 Applicant : ASUSTeK COMPUTER INC. Address : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Date of Receipt : Feb. 05, 2004 Date of Test : Feb. 12, 2004 Report No. : 042L059FI The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 042L059FI Page: 2 of 64 Version:1.0 Test Report Certification Test Date: Feb. 12, 2004 Report No. : 042L059FI Test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Product Name : Notebook P.C Applicant : ASUSTeK COMPUTER INC. Address : 4FL., No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, R.O.C. Manufacturer : ASUSTeK COMPUTER INC. Model No. : MP-XV841US Rated Voltage : AC 120V/60Hz Trade Name : ASUS Measurement Standard : FCC CFR Title 47 Part 15 Subpart C: 2003 Measurement Procedure : ANSI C63.4: 2001 Test Result : Complied Documented By : ( Anita Chou ) Tested By : ( Camus Chen ) Approved By : ( Gene Chang ) Accredited by NIST (NVLAP) NVLAP Lab Code: 200533-0 Report No. 042L059FI Page: 3 of 64 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................4 1.1. EUT Description............................................................................................................................4 1.2. Operational Description ................................................................................................................5 1.3. Tested System Datails....................................................................................................................6 1.4. Configuration of tested System .....................................................................................................7 1.5. EUT Exercise Software .................................................................................................................7 1.6. Test Facility ...................................................................................................................................8 2. Conducted Emission....................................................................................................................9 2.1. Test Equipment..............................................................................................................................9 2.2. Test Setup ......................................................................................................................................9 2.3. Limits ............................................................................................................................................9 2.4. Test Procedure .............................................................................................................................10 2.5. Test Result of Conducted Emission.............................................................................................11 3. Peak Power Output ...................................................................................................................23 3.1. Test Equipment............................................................................................................................23 3.2. Test Setup ....................................................................................................................................23 3.3. Limits ..........................................................................................................................................23 3.4. Test Result of Peak Power Output...............................................................................................24 4. Radiated Emission .....................................................................................................................26 4.1. Test Equipment............................................................................................................................26 4.2. Test Setup ....................................................................................................................................26 4.3. Limits ..........................................................................................................................................27 4.4. Test Procedure .............................................................................................................................28 4.5. Test Result of Radiated Emission................................................................................................29 5. Band Edge ..................................................................................................................................41 5.1. Test Equipment............................................................................................................................41 5.2. Test Setup ....................................................................................................................................41 5.3. Limits ..........................................................................................................................................42 5.4. Test Procedure .............................................................................................................................42 5.5. Test Result of Band Edge ............................................................................................................43 6. Occupied Bandwidth .....................................................................................…

Text truncated - open the document above for the full version.

Report No.: 042L059FI Page : 1 of 3 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 042L059FI Page : 2 of 3 Version:1.0 Front View of Radiated Test Back View of Radiated Test Report No.: 042L059FI Page : 3 of 3 Version:1.0 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)