MSQK008ASUS Tablet

Warranty & Safety Nexus 7 2 © 2013 ASUSTek COMPUTER INC. All rights reserved. Edition 1.07 No part of this guide, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTek COMPUTER INC. (“ASUS”). This clause does not apply to such software which is licensed under the General Public License (“GPL” ) or other Free Open Source Licenses. Copies of the respective license terms, and where required an offer to provide the respective source code, are included in the product. ASUS and the ASUS logo are trademarks of ASUSTek Computer Inc. Nexus and the Nexus logo are the trademarks of Google Inc. All other marks and trademarks are properties of their respective owners. Some information in this guide may differ in some details from the product or its software. All information in this document is subject to change without notice. The Nexus 7 tablet is certified by ASUS under the name ASUS Pad K008. Nexus 7 3 ASUS Warranty Information Form Mr/Mrs./Ms/Miss: _____________________________________ Telephone Number: ___________________________________ Address: _____________________________________________ ____________________________________________________ E-mail: ______________________________________________ Purchase Date: _______ / _______ / _________ (DD/MM/YYYY) Dealer’s Name: ________________________________________ Dealer’s Telephone Number:_____________________________________________ Dealer’s Address: ______________________________________ Serial Number: Important: Please store this card in a secured location for future reference. ASUS reserves the right to request this document before accepting repair requests. Nexus 7 4 This ASUS manufacturer warranty (hereafter referred to as the “Warranty”) is granted by ASUSTeK Computer Inc. (hereafter referred to as“ASUS”) to the purchaser (hereafter referred to as “You”) of the ASUS computer system (hereafter referred to as the “Product”). This warranty card is being delivered with the Product, subject to the following terms and conditions. ASUS accredited Service Agents and Repair Centers will provide the services covered under this Warranty. Warranty period of the Product This warranty applies for the period defined on the label sticker on the warranty card (“Warranty Period”), for example: 24 means 24 months, and 36 means 36 months from the date the Product was first purchased by an end-customer (“Date Of Purchase”). If proof of purchase cannot be provided, the manufacture date as recorded by ASUS will be deemed to be the start of Warranty Period. Statutory Guarantees This warranty is given independently of any statutory warranty that may apply in the country of purchase and does not affect or limit such statutory warranty in any manner whatsoever. ASUS warrants the Product to be free from defects in workmanship and materials for the Warranty Period. The Warranty does not cover bundled accessories, which were delivered together with the Product such as: cables, bag, mouse etc. If the Product fails during normal and proper Nexus 7 5 use within the Warranty Period, ASUS will repair or replace the defective parts of the Product, or the Product itself, with new or reconditioned parts or products that are functionally equivalent or superior to those originally supplied. 1. General This Warranty applies only if the Product was newly manufactured on the Date of Purchase and not sold as used, refurbished or manufacturing seconds. Please keep the original purchase invoice and this warranty card for future service request. This Warranty does not include failure caused by improper installation, operation, cleaning or maintenance, accident, damage, misuse, abuse, non-ASUS modifications to the product, any software programs, normal wear and tear or any other event, act, default or omission outside ASUS’ control. For further details, see section 6 of this Warranty Card. All components that an ASUS Service Center repaired or replaced will be under warranty for three months or for the remainder of the warranty period, whichever is applicable. The Repair Center may recover the originally configured operation system bundled with the Product. ASUS will not restore or transfer any data or software from the Product’s original storage media. If the Product is repaired, all user generated data may be permanently deleted. If the Product is under Warranty, You hereby agree to transfer the ownership of replaced defective parts and such parts shall automatically become the property of ASUS. Nexus 7 6 2. Software Support Any software delivered with the Product is provided “as-is”. ASUS does not guarantee uninterrupted or error-free operation of any software provided with the Product. This warranty covers the hardware of the Product. ASUS will provide technical support for the Product’s preinstalled software only when it concerns the proper functioning of the hardware. For other problems with the software, we advise You to review the user manuals, the ASUS support web site and/or other online resources. Third party software may require support from the respective vendors. 3. Customer responsibility When using the Product • Read the user manual first and use the Product only according to the user manual. • Do not leave the Product connected to the power supply once it is fully charged and not turned on. Some electrical items are not designed to be left connected to the power supply for extended periods of time. • Periodically back up your data stored on the Product. • Keep the original packaging. In case the Product needs to be returned for repair, original packaging provides a better protection for the Product during transportation. Nexus 7 7 • Please check the manual and ASUS support website for troubleshooting solutions, before contacting…

Text truncated - open the document above for the full version.

To turn on, press and hold the button for a few seconds. Fully charge the battery from a power outlet. For online help and support, visit support.google.com/nexus NFC PANTONE 424 C PANTONE 299 C Front 01. WiFi & LTE Back 1 3 2 4 Front w/ pin attached 02. LTE SIM Pin Card Back Die stamp for pin - do not print red outline Front w/o pin attached

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 27 Report No. : SA130418C13 Issued Date : May 08, 2013 Revision : R01 FCC SAR Test Report Report No. : SA130418C13 Applicant : ASUSTek COMPUTER INC. Address : 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Product : ASUS Pad FCC ID : MSQK008 Brand : ASUS Model No. : K008 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 447498 D01 v05 / KDB 616217 D04 v01 Date of Testing : May 01, 2013 ~ May 07, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 27 Report No. : SA130418C13 Issued Date : May 08, 2013 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure ................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods ..................................................…

Text truncated - open the document above for the full version.

Report No.: RF130418C13-3 1 of 29 Report Format Version 5.0.0 FCC TEST REPORT (RFID) REPORT NO.: RF130418C13-3 MODEL NO.: K008 FCC ID: MSQK008 RECEIVED: Apr. 18, 2013 TESTED: Apr. 24 ~ Apr. 25, 2013 ISSUED: May 10, 2013 APPLICANT: ASUSTeK COMPUTER INC. ADDRESS: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130418C13-3 2 of 29 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 3 1. CERTIFICATION ........................................................................................................................... 4 2. SUMMARY OF TEST RESULTS .................................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 5 3. GENERAL INFORMATION ........................................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 6 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................... 7 3.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................... 9 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................................... 9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................................. 9 4. TEST TYPES AND RESULTS .................................................................................................... 10 4.1 RADIATED EMISSION MEASUREMENT .................................................................................. 10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ............................................................... 10 4.1.2 TEST INSTRUMENTS ................................................................................................................ 11 4.1.3 TEST PROCEDURES ................................................................................................................ 12 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................................... 12 4.1.5 TEST SETUP .............................................................................................................................. 13 4.1.6 EUT OPERATING CONDITIONS ............................................................................................... 13 4.1.7 TEST RESULTS ......................................................................................................................... 14 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................. 18 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................................... 18 4.2.2 TEST INSTRUMENTS ................................................................................................................ 18 4.2.3 TEST PROCEDURES ................................................................................................................ 19 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................................... 19 4.2.5 TEST SETUP .............................................................................................................................. 19 4.2.6 EUT OPERATING CONDITIONS ............................................................................................... 19 4.2.7 TEST RESULTS ......................................................................................................................... 20 4.3 FREQUENCY STABILITY ........................................................................................................... 22 4.3.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT ........................................................... 22 4.3.2 TEST INSTRUMENTS ......................................…

Text truncated - open the document above for the full version.

Report No.: RF130418C13-1 1 of 74 Report Format Version 5.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF130418C13-1 MODEL NO.: K008 FCC ID: MSQK008 RECEIVED: Apr. 18, 2013 TESTED: Apr. 26, 2013 ~ May 04, 2013 ISSUED: May 09, 2013 APPLICANT: ASUSTek COMPUTER INC. ADDRESS: 4F., No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130418C13-1 2 of 74 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 5 1. CERTIFICATION .......................................................................................................... 6 2. SUMMARY OF TEST RESULTS .................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ..................................................................... 7 3. GENERAL INFORMATION ........................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT .................................................................. 8 3.2 DESCRIPTION OF TEST MODES .................................................................. 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................. 11 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................ 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 15 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 15 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ................................................. 16 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .......................... 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ....... 16 4.1.2 TEST INSTRUMENTS ..................................................................................... 17 4.1.3 TEST PROCEDURES ..................................................................................... 18 4.1.4 DEVIATION FROM TEST STANDARD ........................................................... 18 4.1.5 TEST SETUP ................................................................................................... 19 4.1.6 EUT OPERATING CONDITIONS .................................................................... 19 4.1.7 TEST RESULTS .............................................................................................. 20 4.2 CONDUCTED EMISSION MEASUREMENT .................................................. 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................ 30 4.2.2 TEST INSTRUMENTS ..................................................................................... 30 4.2.3 TEST PROCEDURES ..................................................................................... 31 4.2.4 DEVIATION FROM TEST STANDARD ........................................................... 31 4.2.5 TEST SETUP ................................................................................................... 32 4.2.6 EUT OPERATING CONDITIONS .................................................................... 32 4.2.7 TEST RESULTS .............................................................................................. 33 4.3 6dB BANDWIDTH MEASUREMENT ............................................................... 35 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ............................................ 35 4.3.2 TEST SETUP ................................................................................................... 35 4.3.3 TEST INSTRUMENTS ..................................................................................... 35 4.3.4 TEST PROCEDURE ........................................................................................ 35 4.3.5 DEVIATION FROM TEST STANDARD ........................................................... 35 4.3.6 EUT OPERATING CONDITIONS .................................................................... 35 4.3.7 TEST RESULTS .............................................................................................. 36 4.4 CONDUCTED OUTPUT POWER.................................................................... 38 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT .................... 38 4.4.2 TEST SETUP .............…

Text truncated - open the document above for the full version.

Report No.: RF130418C13-2 1 of 66 Report Format Version 5.0.0 FCC TEST REPORT (15.407) REPORT NO.: RF130418C13-2 MODEL NO.: K008 FCC ID: MSQK008 RECEIVED: Apr. 18, 2013 TESTED: Apr. 30, 2013 ~ May 04, 2013 ISSUED: May 09, 2013 APPLICANT: ASUSTek COMPUTER INC. ADDRESS: 4F., No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130418C13-2 2 of 66 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD 4 1. CERTIFICATION 5 2. SUMMARY OF TEST RESULTS 6 2.1 MEASUREMENT uncertainty 6 3. GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 9 3.2.1 Test Mode Applicability and tested channel detail 10 3.3 DESCRIPTION OF SUPPORT UNITS 13 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST 13 3.4 Duty cycle of test signal 14 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS 14 4. TEST TYPES AND RESULTS 15 4.1 Radiated Emission AND BANDEDGE Measurement 15 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT 15 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS 16 4.1.3 TEST INSTRUMENTS 17 4.1.4 TEST PROCEDURES 18 4.1.5 DEVIATION FROM TEST STANDARD 18 4.1.6 TEST SETUP 19 4.1.7 EUT OPERATING CONDITION 19 4.1.8 Test RESULTs 20 4.2 CONDUCTED EMISSION MEASUREMENT 46 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT 46 4.2.2 TEST INSTRUMENTS 46 4.2.3 TEST PROCEDURES 47 4.2.4 DEVIATION FROM TEST STANDARD 47 4.2.5 TEST SETUP 47 4.2.6 EUT OPERATING CONDITIONS 47 4.2.7 TEST RESULTS 48 4.3 Peak transmit power MEASUREMENT 50 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT 50 4.3.2 TEST SETUP 50 4.3.3 TEST INSTRUMENTS 50 4.3.4 TEST PROCEDURE 51 4.3.5 DEVIATION FROM TEST STANDARD 51 4.3.6 EUT OPERATING CONDITIONS 51 4.3.7 TEST RESULTS 52 4.4 PEAK power spectral density measurement 54 4.4.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT 54 4.4.2 TEST SETUP 54 Report No.: RF130418C13-2 3 of 66 Report Format Version 5.0.0 4.4.3 TEST INSTRUMENTS 54 4.4.4 TEST PROCEDURES 54 4.4.5 DEVIATION FROM TEST STANDARD 55 4.4.6 EUT OPERATING CONDITIONS 55 4.4.7 TEST RESULTS 55 4.5 Peak power EXCURSION MEASUREMENT 57 4.5.1 LIMITS OF PEAK POWER EXCURSION MEASUREMENT 57 4.5.2 TEST SETUP 57 4.5.3 TEST INSTRUMENTS 57 4.5.4 TEST PROCEDURE 57 4.5.5 DEVIATION FROM TEST STANDARD 57 4.5.6 EUT OPERATING CONDITIONS 57 4.5.7 TEST RESULTS 58 4.6 FREQUENCY STABILITY 61 4.6.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT 61 4.6.2 TEST SETUP 61 4.6.3 TEST INSTRUMENTS 61 4.6.4 TEST PROCEDURE 62 4.6.5 DEVIATION FROM TEST STANDARD 62 4.6.6 EUT OPERATING CONDITION 62 4.6.7 TEST RESULTS 63 5. PHOTOGRAPHS OF THE TEST CONFIGURATION 64 6. INFORMATION ON THE TESTING LABORATORIES 65 7. APPENDIX A - Modifications recorders for engineering changes to the eut BY THE LAB 66 Report No.: RF130418C13-2 4 of 66 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF130418C13-2 Original release May 09, 2013 Report No.: RF130418C13-2 5 of 66 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: ASUS Pad MODEL NO.: K008 BRAND: ASUS APPLICANT: ASUSTek COMPUTER INC. TESTED: Apr. 30, 2013 ~ May 04, 2013 TEST SAMPLE: Production Unit STANDARDS: FCC Part 15, Subpart E (Section 15.407) ANSI C63.10-2009 The above equipment (model: K008) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : May 09, 2013 Vera Huang / Specialist APPROVED BY : , DATE : May 09, 2013 Sam Chen / Assistant Manager Report No.: RF130418C13-2 6 of 66 Report Format Version 5.0.0 2. SUMMARY OF TEST RESULTS The EUT …

Text truncated - open the document above for the full version.