MSQMPDONGLE1WIRELESS DONGLE

NL CS TR FR PT:BR DE RU IT ES EN FI ZH ZH:SC Mouse features / 滑鼠功能 / 鼠標功能 Package Contents Q20547 / Revised Edition V2 / July 2022 Quick Start Guide 快速使用指南（繁體中文） 快速使用指南（簡體中文） クイックスタートガイド (JP) 간단사용설명서 (KO) Guide de démarrage rapide (FR) Schnellstartanleitung (DE) Guida rapida (IT) Guia de Início Rápido (PT:BR) Краткое руководство (RU) Guía de inicio rápido (ES) Beknopte handleiding (NL) Hızlı Başlangıç Kılavuzu (TR) Стисле керівництво для початку експлуатації (UA) Przewodnik szybkiego startu (PL) Rychlý průvodce (CS) Ghid de pornire rapidă (RO) Gyors üzembe helyezési útmutató (HU) Snabbstartshandbok (SV) Pikaopas (FI) Hurtigstartveiledning (NO) Stručný návod na používanie (SK) (AR)دليل التشغيل السريع )HBמדריך להתחלה מהירה ( Replacing the switches Profile switching ProfileButton CombinationDefault lighting effect Profile 1 + Color Cycle Profile 2 + Breathing (purple) Profile 3 + Static (blue) Profile 4 + Breathing (green) Profile 5 + Reactive (yellow) Setting up your gaming mouse as a Bluetooth wireless mouse Set the connection switch to the Bluetooth mode. Specifications* ResolutionDPI 1DPI 2DPI 3 (Default)DPI 4 100 DPI to 36000 DPI400 DPI800 DPI1600 DPI3200 DPI * You may customize the DPI settings for DPI 1-4 through Armoury Crate or the DPI On-The-Scroll tuning function. * We recommend using the wireless dongle extender when using the mouse in 2.4GHz mode. / 我們建議當您在使用滑鼠的 RF 2.4GHz 無線模式時，使用無線接收器延長器。 / 我們建議當您在使用鼠標的 RF 2.4GHz 無線模式時，使用無線接收器延長器。 ** Only use the wireless dongle extender for the wireless dongle. / 無線接收器延長器僅可用於連接無線接收器。 / 無線接收器延長器僅可用於連接無線接收器。 BLE HostLighting effect color Host 1 (default)Red Host 2Purple Host 3Blue Switching between Bluetooth host devices Press the Pairing button to switch between different host devices your gaming mouse is already paired to. The LED on your gaming mouse will blink for 1 second depending on the host switched to. Updating the firmware and customization 1. Connect your gaming mouse to your computer using the bundled cable, then connect the USB dongle to a USB port. 2. Download and install the Armoury Crate software from https://rog.asus.com 3. Follow the software instructions to update your gaming mouse and dongle’s firmware. 4. Customize your gaming mouse using Armoury Crate. Connecting your gaming mouse Setting up your gaming mouse as a wired mouse Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and a USB port on your computer Setting up your gaming mouse as a RF wireless mouse 1. Connect the USB dongle to a USB port on your computer. 2. Set the connection switch to the RF 2.4G Wireless mode. Battery Status The LED on your gaming mouse will turn red (blinking) when the battery power is below 20% in Bluetooth or RF 2.4G mode. You may charge your gaming mouse by using the bundled USB cable. Pairing Bluetooth mode to additional host devices (max. 3) 1. Set the connection switch to the Bluetooth mode. 2. Press and hold the Pairing button for 3 seconds until the LED on your gaming mouse start to blink blue. Once your gaming mouse has been successfully paired, the LED indicator on your gaming mouse will light up blue for 3 seconds. Using the DPI On-The-Scroll tuning function The DPI On-The-Scroll tuning function allows you to customize the DPI of your gaming mouse without using Armoury Crate. 1. Press and hold the DPI button for 3 seconds until the LED on your gaming mouse light up. 2. Scroll the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your mouse will differ depending on the DPI adjustment. 3. Press the DPI button once you have finished customizing the DPI value to save the changes made. Nastavení herní myši jako bezdrátové Bluetooth myši Nastavte přepínač připojení na bezdrátový radiofrekvenční režim Bluetooth. Aktualizování firmwaru a přizpůsobení 1. Připojte herní myš k počítači přiloženým kabelem. 2. Stáhněte a nainstalujte software Armoury Crate z webu https://rog.asus.com. 3. Podle pokynů softwaru zaktualizujte firmware herní myši. 4. Přizpůsobte vaši herní myši pomocí Armoury Crate. Připojení herní myši Nastavení herní myši jako kabelové myši Připojte přiložený kabel USB Type-C® na Type-A k herní myši a k portu USB počítače. Nastavení herní myši jako bezdrátové RF myši 1. Připojte dodaný kabel USB adaptér k portu USB počítače. 2. Nastavte přepínač připojení na bezdrátový radiofrekvenční režim 2,4 G. Stav baterie Když nabití baterie klesne pod 20 % v režimu Bluetooth nebo RF 2.4G, indikátor LED na herní myši začnou svítit červeně (Bliká). K nabití herní myši lze použít přiložený kabel USB. Spárování s dalšími hostitelskými zařízeními (max. 3) v režimu Bluetooth 1. Nastavte přepínač připojení na bezdrátový radiofrekvenční režim Bluetooth. 2. Stiskněte a podržte tlačítko párování 3 sekundy, dokud indikátor LED na herní myši nezačnou blikat modře. Po úspěšném spárování herní myši bude indikátor LED na myši svítit 3 sekundy modře. Použití funkce okamžitého ladění DPI On- The-Scroll Funkce okamžitého ladění DPI On-The-Scrollumožňuje přizpůsobit DPI On-The-Scroll herní myši bez použití softwaru Armoury Crate. 1. Stiskněte a podržte tlačítko DPI 3 sekundy, dokud se nerozsvítí indikátor LED na vaší herní myši. 2. Posouváním rolovacího kolečka dopředu a dozadu upravte DPI. Barevný odstín indikátoru LED na myši se bude lišit podle nastavení DPI. 3. Jakmile dosáhnete požadované hodnoty DPI, uložte nastavení stisknutím tlačítka DPI. Uw gamemuis instellen als een bekabelde Bluetooth-muis Stel de verbindingsschakelaar in op de Bluetooth modus. De firmware en aanpassing bijwerken 1. Sluit uw gamemuis aan op uw computer via de meegeleverde kabel. 2. Download en installeer de Armoury Crate-software van https://rog.asus.com. 3. Volg de softwareinstructies voor het bijwerken van de firmware van uw gaming-muis. 4. Pas uw gamemuis aan met Armoury Crate. Uw gamemuis aansluiten Uw gamemuis instellen als een bekabelde muis Sluit de meegeleverde USB Type-C® naar Type-A- kabel aan op uw gamemuis en een USB-poort op …

Text truncated - open the document above for the full version.

FCC ID.: MSQMPDONGLE1 Date: July 29, 2022 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Type of Confidentiality Requested Exhibit ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term Internal Photos ☒ Permanent Operation Description/Theory of Operation ☐ Permanent Parts List & Placement/BOM ☐ Permanent Tune-Up Procedure ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term User’s Manual The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, ------------------------------------------------------ Jackson Yen / Associate Vice President ASUSTeK Computer Inc

Declaration of Authorization We Name: ASUSTeK Computer Inc Address: 1F, No. 15, Lide Rd. City: Beitou, Taipei Country: Taiwan Declare that: Name Representative of agent: Jocelyn Wu Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No.5-22, Ruishukeng, Linkou Dist., City: New Taipei City 24451, Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Trade Name Product Model FCC ID IC ID ASUS WIRELESS DONGLE MPDONGLE1 MSQMPDONGLE1 3568A-MPDONGLE1 on our behalf. This is valid until July 29, 2023, or until FCC and IC certification are completed, whichever comes sooner. Date: July 29, 2022 City: Beitou, Taipei Name: Jackson Yen Function: Associate Vice President Signature:

Report No.: 2260115R-Product Photos Page: 1 of 3 (1) EUT Photo (2) EUT Photo Report No.: 2260115R-Product Photos Page: 2 of 3 (3) EUT Photo (4) EUT Photo Report No.: 2260115R-Product Photos Page: 3 of 3 (5) EUT Photo (6) EUT Photo

201- XXXXXX R XXX- XXXXXX R 4.0 2.7 3.5 50 3.2 4 3.5 5.0 1.397 CCAHXXXXXXXXXX R-NZ R-C-MSQ-MPDONGLE1 Model:MPDONGLE1 FCC IDMSQMPDONGLE1 IC3568A-MPDONGLE1 L 4 MP GD 000001 流水號,十進制(000001-999999) 產品代碼(不同TEAM ASUS產品代碼不同) 月份(1=1,2=2...10=A,11=B,12=C) 0~9=2000~2009;A~Z=2010~2029 (其中字母:I,O,P,Q,U,V除外) 年份 (流水號000001最高位只能為: 以0---4開頭DG使用:5---9開頭CQ使用) Primax代碼(固定碼, 東莞用FD, 重慶用GD) SSN:L4MPGD000001

Report No.: 2260115R-Product Photos Page: 1 of 3 (1) EUT Photo (2) EUT Photo Report No.: 2260115R-Product Photos Page: 2 of 3 (3) EUT Photo (4) EUT Photo Report No.: 2260115R-Product Photos Page: 3 of 3 (5) EUT Photo RF Chip Antenna

Report No.: 2260115R-SAUSSARV02-A Page: 1 of 24 FCC SAR Test Report Product Name ： WIRELESS DONGLE Model No. ： MPDONGLE1 Applicant ： ASUSTeK Computer, Inc Address ： 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Date of Receipt ： 2022/06/06 Issued Date ： 2022/07/25 Report No. ： 2260115R-SAUSSARV02-A Report Version ： V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2260115R-SAUSSARV02-A Page: 2 of 24 Test Report Issued Date: 2022/07/25 Report No.: 2260115R-SAUSSARV02-A Product Name ： WIRELESS DONGLE Applicant ： ASUSTeK Computer, Inc Address ： 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer ： ASUSTeK Computer, Inc Model No. ： MPDONGLE1 Trade Name ： ASUS FCC ID ： MSQMPDONGLE1 Applicable Standard ： IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Measurement procedures ： 47CFR § 2.1093 KDB 248227 D01 v02r02 Test Result ： Max. SAR Measurement (1g) 2.4GHz: 0.159 W/kg Application Type ： Certification The above equipment has been tested by DEKRA, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample's SAR characteristics under the conditions specified in this report. Documented By ： ( Senior Project Specialist / Joanne Lin ) Tested By ： ( Senior Engineer / Luke Cheng ) Approved By ： ( Supervisor / San Lin ) Report No.: 2260115R-SAUSSARV02-A Page: 3 of 24 TABLE OF CONTENTS Description Page 1. General Information ............................................................................................................ 5 1.1 EUT Description ...................................................................................................... 5 1.2 Antenna List ............................................................................................................ 5 1.3 Test Environment .................................................................................................... 6 2. SAR Measurement System ................................................................................................ 7 2.1 DASY5 System Description ..................................................................................... 7 2.1.1 Applications .......................................................................................................... 8 2.1.2 Area Scans ........................................................................................................... 8 2.1.3 Zoom Scan (Cube Scan Averaging) ..................................................................... 8 2.1.4 Uncertainty of Inter-/Extrapolation and Averaging ................................................ 8 2.2 DASY5 E-Field Probe .............................................................................................. 9 2.2.1 Isotropic E-Field Probe Specification .................................................................... 9 2.3 Boundary Detection Unit and Probe Mounting Device ........................................... 10 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ............................ 10 2.5 Robot ..................................................................................................................... 11 2.6 Light Beam Unit ..................................................................................................... 11 2.7 Device Holder ........................................................................................................ 12 2.8 SAM Twin Phantom ............................................................................................... 12 3. Tissue Simulating Liquid ................................................................................................. 13 3.1 The composition of the tissue simulating liquid ...................................................... 13 3.2 Tissue Calibration Result ....................................................................................... 13 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ................................. 14 4. SAR Measurement Procedure ......................................................................................... 15 4.1 SAR System Check ............................................................................................... 15 4.1.1 Dipoles ............................................................................................................... 15 4.1.2 System Check Result ......................................................................................... 15 4.2 SAR Measurement Procedure ............................................................................... 16 5. SAR Exposure Limits ....................................................................................................... 17 6. Test Equipment List .......................................................................................................... 18 7. Measurement Uncertainty ................................................................................................ 20 8. Conducted Power Measurement (Including tolerance allowed for production unit) . 22 9. Test Results ............................................................…

Text truncated - open the document above for the full version.

Report No.: 2260115R-RFUSOTHV05-A Page: 1 of 34 FCC Test Report Product Name WIRELESS DONGLE Model No. MPDONGLE1 FCC ID MSQMPDONGLE1 Applicant ASUSTeK Computer, Inc Address 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Date of Receipt June 06, 2022 Issued Date July 12, 2022 Report No. 2260115R-RFUSOTHV05-A Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2260115R-RFUSOTHV05-A Page: 2 of 34 Test Report Issued Date: July 12, 2022 Report No.: 2260115R-RFUSOTHV05-A Product Name WIRELESS DONGLE Applicant ASUSTeK Computer, Inc Address 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer ASUSTeK Computer, Inc Model No. MPDONGLE1 FCC ID MSQMPDONGLE1 EUT Rated Voltage DC 5C (Power by USB) EUT Test Voltage DC 5C (Power by USB) Trade Name ASUS Applicable Standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Test Result Complied Documented By : ( Senior Project Specialist / Genie Chang ) Tested By : ( Senior Engineer / Bill Lin ) Approved By : ( Senior Engineer / Jack Hsu ) Report No.: 2260115R-RFUSOTHV05-A Page: 3 of 34 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ............................................................................................................... 5 1.1. EUT Description ...................................................................................................................................... 5 1.2. Tested System Details .............................................................................................................................. 7 1.3. Configuration of Tested System .............................................................................................................. 7 1.4. EUT Exercise Software ........................................................................................................................... 7 1.5. Test Facility ............................................................................................................................................. 8 1.6. List of Test Equipment ............................................................................................................................. 9 1.7. Uncertainty ............................................................................................................................................ 10 2. CONDUCTED EMISSION ................................................................................................................ 11 2.1. Test Setup .............................................................................................................................................. 11 2.2. Limits ..................................................................................................................................................... 11 2.3. Test Procedure ....................................................................................................................................... 12 2.4. Test Result of Conducted Emission ....................................................................................................... 13 3. PEAK POWER OUTPUT .................................................................................................................. 14 3.1. Test Setup ............................................................................................................................................ 14 3.2. Limit ...................................................................................................................................................... 14 3.3. Test Procedure ....................................................................................................................................... 14 3.4. Test Result of Peak Power Output ......................................................................................................... 15 4. RADIATED EMISSION ..................................................................................................................... 16 4.1. Test Setup .............................................................................................................................................. 16 4.2. Limits ..................................................................................................................................................... 17 4.3. Test Procedure ....................................................................................................................................... 18 4.4. Test Result of Radiated Emission .......................................................................................................... 20 5. RF ANTENNA CONDUCTED TEST ................................................................................................ 22 5.1. Test Setup .............................................................................................................................................. 22 5.2. Limits ..................................................................................................................................................... 22 5.3. Test Procedure ..................................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 2260115R-SAUSSARV02-A Page: 1 of 4 Appendix C. Test Setup Photographs EUT Back EUT Back (NB) 5mm 5mm Report No.: 2260115R-SAUSSARV02-A Page: 2 of 4 EUT Front EUT Left-Side 5mm 5mm Report No.: 2260115R-SAUSSARV02-A Page: 3 of 4 EUT Right-Side EUT Right-Side (NB) 5mm 5mm Report No.: 2260115R-SAUSSARV02-A Page: 4 of 4 EUT Tip Depth of the liquid in the phantom Note: The positions used in the measurements were according to IEEE 1528-2013. 5mm

Report No.: 2260115R-RFUSOTHV05-A Page : 1 of 2 Appendix 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 2260115R-RFUSOTHV05-A Page : 2 of 2 Radiated Test Radiated Test (Horn)