MSQMPRFMODULE1Module

2.4G Proprietary/BLE Module MPRFMODULE1 Manual Page 2 of 17 Revision history Version Date Description 1.0 2022/5/22 First release 1.1 2022/8/22 RF warning message 1.2 2022/8/22 RF warning message update 1.3 2022/8/22 RF info update 1.4 2022/09/06 Add ch4 antenna instructions 1.5 2022/10/04 Add 5.2 – 5.4 for FCC/IC requirement Page 3 of 17 Index PRODUCT INTRODUCTION ............................................................... 錯誤! 尚未定義書籤。 1.1 INTRODUCTION ................................................................................................. 錯誤! 尚未定義書籤。 1.2 FEATHER ......................................................................................................... 錯誤! 尚未定義書籤。 1.3 CERTIFICATION ................................................................................................. 錯誤! 尚未定義書籤。 PRODUCT DESCRIPTIONS ................................................................ 錯誤! 尚未定義書籤。 2.1 DIMENSION....................................................................................................... 錯誤! 尚未定義書籤。 2.2 PIN DEFINITION ................................................................................................. 錯誤! 尚未定義書籤。 2.3 FOOTPRINT ...................................................................................................... 錯誤! 尚未定義書籤。 2.4 BLOCK DIAGRAM .............................................................................................. 錯誤! 尚未定義書籤。 ELECTRICAL SPECIFICATION .......................................................... 錯誤! 尚未定義書籤。 3.1 ABSOLUTE MAXIMUM RATINGS .......................................................................... 錯誤! 尚未定義書籤。 3.2 RECOMMENDED OPERATING CONDITIONS........................................................... 錯誤! 尚未定義書籤。 3.3 GENERAL RADIO CHARACTERISTICS .................................................................. 錯誤! 尚未定義書籤。 3.4 RADIO CURRENT CONSUMPTION (TRANSMITTER) ................................................ 錯誤! 尚未定義書籤。 3.5 RADIO CURRENT CONSUMPTION (RECEIVER)...................................................... 錯誤! 尚未定義書籤。 3.6 TRANSMITTER SPECIFICATION ........................................................................... 錯誤! 尚未定義書籤。 3.7 RECEIVER OPERATION ...................................................................................... 錯誤! 尚未定義書籤。 3.8 RX SELECTIVITY 5 ............................................................................................. 錯誤! 尚未定義書籤。 3.9 RX INTERMODULATION 6 ................................................................................... 錯誤! 尚未定義書籤。 3.10 RADIO TIMING ................................................................................................... 錯誤! 尚未定義書籤。 3.11 RECEIVED SIGNAL STRENGTH INDICATOR (RSSI) SPECIFICATIONS ...................... 錯誤! 尚未定義書籤。 ANTENNA ............................................................................................ 錯誤! 尚未定義書籤。 4.1 ANTENNA TYPE AND GAINS .............................................................................. 錯誤! 尚未定義書籤。 4.2 ANTENNA PLACEMENT WITHIN THE HOST PLATFORM ........................................ 錯誤! 尚未定義書籤。 4.3 RECOMMENDED METHOD FOR RETENTION OF CABLE ....................................... 錯誤! 尚未定義書籤。 RF WARNING MESSAGE ................................................................................................. 14 5.1 RF EXPOSURE INFORMATION (SAR) ............................................................................................... 14 5.2 CLASS B DEVICE INTERFERENCE STATEMENT ................................................................................. 14 5.3 INFORMATION FOR OEMS AND HOST INTEGRATORS ........................................................................ 15 5.4 SIMULTANEOUS TRANSMISSION OF ASUS WIRELESS MODULE WITH OTHER INTEGRATED OR PLUG-IN TRANSMITTERS ......................................................................................................................................... 15 Page 4 of 17 Product Introduction 1.1 Introduction MPRFMODULE1 is a BLE 5.2/ 2.4G proprietary module based on Nordic nRF52840 SoC with a 32-bit ARM ® Cortex ® M4 CPU, 1MB flash and 256kB RAM. The module comes with a coaxial connector for an external PIFA antenna. 1.2 Feather ▪ ARM ® Cortex ® M4 32bit processor with FPU, 64Mhz ▪ 1 MB flash and 256 kB RAM ▪ Bluetooth ® 5 & 2.4 GHz transceiver ▪ BLE 5 data rate: 1 Mbps ▪ 2.4G proprietary data rate: 2 Mbps ▪ Flexible power mangement: 1.7V to 5.5V supply voltage range On-chip DC/DC and LDO regulators with automated low current modes 1.8V to 3.3V regulated supply for external components 1.3 Certification ▪ FCC ID: ▪ CE IDL: ▪ DID: Page 5 of 17 Product Descriptions 2.1 Dimension ▪ PCB Size: 21 x 30 x 0.8mm Unit (mm) ▪ Shielding Case Page 6 of 17 Unit (mm) 2.2 Pin definition Page 7 of 17 Pin No. Name Function Description 1 GND Power ground 2 GND Power ground 3 GND Power ground 4 P1.11 Digital I/O General purpose I/O (Standard drive) 5 P1.12 Digital I/O General purpose I/O (Standard drive) 6 P1.14 Digital I/O General purpose I/O (Standard drive) 7 P0.03 Digital I/O Analog input General purpose I/O (Standard drive) Analog input 8 P0.28 Digital I/O Analog input General purpose I/O (Standard drive) Analog input 9 P1.10 Digital I/O General purpose I/O (Standard drive) 10 P1.13 Digital I/O General purpose I/O (Standard drive) 11 P1.15 Digital I/O General purpose I/O (Standard drive) 12 P0.02 Digital I/O Analog input General purpose I/O (Standard drive) Analog input 13 P0.29 Digital I/O Analog input General purpose I/O (Standard drive) Analog input 14 P0.31 Digital I/O Analog input General purpose I/O (Standard drive) Analog input 15 P0.30 Digital I/O Analog input General purpose I/O (Standard drive) Analog input 16 P0.27 Digital I/O General purpose I/O 17 P0.05 Digital I/O Analog input General purpose I/O Analog input 18 P0.07 Digital I/O General purpose I/O 19 P1.08 Digital I/O General purpose I/O 20 P0.11 Digital I/O General purpose I/O 21 P0.00 Digital I/…

Text truncated - open the document above for the full version.

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan FCC ID.: MSQMPRFMODULE1 Date: August 24,2022 Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: MSQMPRFMODULE1 Product: Module Model: MPRFMODULE1 We don’t provide any controls or software to allow operation outside the USA frequency band when we sell a product bearing the FCC ID: MSQMPRFMODULE1 in USA. Sincerely, ------------------------------------------------------ Name: Jackson Yen Title: Associate Vice President Company name: ASUSTeK Computer, Inc

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 070920-02b Request for Modular/Limited Modular Approval Date: September 21, 2022 Subject: Manufacturer’s Declaration for ☒ - Modular Approval ☐ - Split Modular Approval ☐ - Limited Modular Approval ☐ - Limited Split Modular Approval Confidentiality Request for: MSQMPRFMODULE1 8 Basic Requirements – FCC Part 15.212(a)(1) For Items Marked “NO(*)”, the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) ☒ - YES ☐ - NO(*) Details: <example – The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector> 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) ☒ - YES ☐ - NO(*) Details: <example – Data to the modulation circuit is buffered as described in the operational description provided with the application> 3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii) ☒ - YES ☐ - NO(*) Details: <example – The module contains its own power supply regulation. Please refer to schematic filed with this application> 4. The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) ☒ - YES ☐ - NO(*) Details: <example – The module connects to its antenna using an UFL connector which is considered a non-standard connector. A list of antennas tested and approved with this device may be found in users manual provided with the application> 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) ☒ - YES ☐ - NO(*) Details: <example – The module was tested stand-alone as shown in test setup photographs filed with this application> THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 070920-02b Modular Approval Requirement Requirement Met 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) ☒ - YES ☐ - NO(*) Details: <example – There is a label on the module as shown in the labeling exhibit filed with th…

Text truncated - open the document above for the full version.

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan FCC ID.: MSQMPRFMODULE1 Date: September 1, 2022 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: Type of Confidentiality Requested Exhibit ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term Internal Photos ☒ Permanent Operation Description/Theory of Operation ☐ Permanent Parts List & Placement/BOM ☐ Permanent Tune-Up Procedure ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term User’s Manual The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Jackson Yen/Associate Vice President ASUSTeK Computer, Inc

ASUSTeK COMPUTER INC. 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Declaration of Authorization We Name: ASUSTeK Computer, Inc Address: 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan City: Taipei City Country: Taiwan Declare that: Name Representative of agent: Coco Pong Agent Company name: Dekra Testing and Certification Co., Ltd. Address: No. 5-22 Ruishukeng, Linkou Dist. City: New Taipei City 24451 Country Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product description: Module Type designation: MPRFMODULE1 Trademark: ASUS FCC ID: MSQMPRFMODULE1 IC ID: 3568A-MPRFMODULE1 Validity/ expiry date 2022/08/24-2023/08/24 on our behalf. Date: 2022/08/24 City: Taipei City Name: Jackson Yen Function: Associate Vice President Signature: .

Report No: 2270398R-Product Photos Page: 2 of 7 (1) EUT Photo (2) EUT Photo Report No: 2270398R-Product Photos Page: 3 of 7 (3) EUT Photo (4) EUT Photo Report No: 2270398R-Product Photos Page: 4 of 7 (5) EUT Photo (6) EUT Photo

R

Report No: 2270398R-Product Photos Page: 5 of 7 (7) EUT Photo (8) EUT Photo Report No: 2270398R-Product Photos Page: 6 of 7 (9) EUT Photo (10) EUT Photo Report No: 2270398R-Product Photos Page: 7 of 7 (11) EUT Photo

Report No.: 2270398R-SAUSSARV02-A Page: 1 of 24 FCC SAR Test Report Product Name ： Module Model No. ： MPRFMODULE1 Applicant ： ASUSTeK Computer, Inc Address ： 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Date of Receipt ： 2022/07/14 Issued Date ： 2022/10/06 Report No. ： 2270398R-SAUSSARV02-A Report Version ： V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2270398R-SAUSSARV02-A Page: 2 of 24 Test Report Issued Date: 2022/10/06 Report No.: 2270398R-SAUSSARV02-A Product Name ： Module Applicant ： ASUSTeK Computer, Inc Address ： 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer ： ASUSTeK Computer, Inc Model No. ： MPRFMODULE1 Trade Name ： ASUS FCC ID ： MSQMPRFMODULE1 Applicable Standard ： IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Measurement procedures ： 47CFR § 2.1093 KDB 248227 D01 v02r02 Test Result ： Max. SAR Measurement (1g) 2.4GHz: 0.343 W/kg Application Type ： Certification The above equipment has been tested by DEKRA, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample's SAR characteristics under the conditions specified in this report. Documented By ： (Senior Project Specialist / April Chen) Tested By ： ( Senior Engineer / Luke Cheng ) Approved By ： ( Supervisor / San Lin ) Report No.: 2270398R-SAUSSARV02-A Page: 3 of 24 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................................. 5 1.1 EUT Description .................................................................................................................. 5 1.2 Antenna List ........................................................................................................................ 5 1.3 Test Environment ................................................................................................................ 6 2. SAR Measurement System ...................................................................................................... 7 2.1 DASY5 System Description ................................................................................................. 7 2.1.1 Applications ....................................................................................................................... 8 2.1.2 Area Scans ....................................................................................................................... 8 2.1.3 Zoom Scan (Cube Scan Averaging) ................................................................................. 8 2.1.4 Uncertainty of Inter-/Extrapolation and Averaging ............................................................ 8 2.2 DASY5 E-Field Probe .......................................................................................................... 9 2.2.1 Isotropic E-Field Probe Specification ................................................................................ 9 2.3 Boundary Detection Unit and Probe Mounting Device ....................................................... 10 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ........................................ 10 2.5 Robot .................................................................................................................................. 11 2.6 Light Beam Unit .................................................................................................................. 11 2.7 Device Holder .................................................................................................................... 12 2.8 SAM Twin Phantom ........................................................................................................... 12 3. Tissue Simulating Liquid ........................................................................................................ 13 3.1 The composition of the tissue simulating liquid .................................................................. 13 3.2 Tissue Calibration Result ................................................................................................... 13 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ............................................. 14 4. SAR Measurement Procedure ............................................................................................... 15 4.1 SAR System Check ........................................................................................................... 15 4.1.1 Dipoles ............................................................................................................................ 15 4.1.2 System Check Result ...................................................................................................... 15 4.2 SAR Measurement Procedure ........................................................................................... 16 5. SAR Exposure Limits ............................................................................................................. 17 6. Test Equipment List .....................................................................................................…

Text truncated - open the document above for the full version.

Date：2022/8/2 Antenna Information 2500 2420 2430 2440 Frequency (MHz) 2400 2410 2450 2460 2470 3.03 3.13 3.06 Antenna Peak Gain Table: Antenna information 2480 2490 Peak gain w/ cable loss (dBi) 2.97 2.94 Antenna Part number 20LT0-000LJ000 Antenna Type PIFA 3.50 3.42 3.14 2.4GHz 2400~2500MHz 3.96 Antenna Information Section 1. Antenna Assembly Specifications Antenna Gain (dBi) 3.96 3.65 3.48 Vendor ASUS Regulatory Antenna Information 1/4 Date：2022/8/2 Antenna Dimensioned Drawing: Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of antenna here Antenna Photo： Regulatory Antenna Information 2/4 Date：2022/8/2 Section 3. Radiation characteristics of antennae Loaded in Host Platform Antenna: 2450 MHz 2400-2500MHz radiation characteristic Antenna: 2400 MHz Regulatory Antenna Information 3/4 Date：2022/8/2 Antenna: 2500 MHz Regulatory Antenna Information 4/4

Report No.: 2270398R-RFUSOTHV05-A Page: 1 of 34 FCC Test Report Product Name Module Model No. MPRFMODULE1 FCC ID. MSQMPRFMODULE1 Applicant ASUSTeK Computer, Inc Address 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Date of Receipt Jul. 14, 2022 Issued Date Oct. 06, 2022 Report No. 2270398R-RFUSOTHV05-A Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2270398R-RFUSOTHV05-A Page: 2 of 34 Test Report Issued Date: Oct. 06, 2022 Report No.: 2270398R-RFUSOTHV05-A Product Name Module Applicant ASUSTeK Computer, Inc Address 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer ASUSTeK Computer, Inc Model No. MPRFMODULE1 FCC ID. MSQMPRFMODULE1 EUT Rated Voltage DC 3.3V (by Test Fixture) EUT Test Voltage DC 3.3V (by Test Fixture) Trade Name ASUS Applicable Standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Test Result Complied Documented By : (Senior Project Specialist / April Chen) Tested By : ( Senior Engineer / Ivan Chuang ) Approved By : ( Senior Engineer / Jack Hsu ) Report No.: 2270398R-RFUSOTHV05-A Page: 3 of 34 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ............................................................................................................... 5 1.1. EUT Description ...................................................................................................................................... 5 1.2. Tested System Details .............................................................................................................................. 7 1.3. Configuration of Tested System .............................................................................................................. 7 1.4. EUT Exercise Software ........................................................................................................................... 7 1.5. Test Facility ............................................................................................................................................. 8 1.6. List of Test Equipment ............................................................................................................................. 9 1.7. Uncertainty ............................................................................................................................................ 10 2. CONDUCTED EMISSION ................................................................................................................ 11 2.1. Test Setup .............................................................................................................................................. 11 2.2. Limits ..................................................................................................................................................... 11 2.3. Test Procedure ....................................................................................................................................... 12 2.4. Test Result of Conducted Emission ....................................................................................................... 13 3. PEAK POWER OUTPUT .................................................................................................................. 14 3.1. Test Setup .............................................................................................................................................. 14 3.2. Limit ...................................................................................................................................................... 14 3.3. Test Procedure ....................................................................................................................................... 14 3.4. Test Result of Peak Power Output ......................................................................................................... 15 4. RADIATED EMISSION ..................................................................................................................... 16 4.1. Test Setup .............................................................................................................................................. 16 4.2. Limits ..................................................................................................................................................... 17 4.3. Test Procedure ....................................................................................................................................... 18 4.4. Test Result of Radiated Emission .......................................................................................................... 20 5. RF ANTENNA CONDUCTED TEST ................................................................................................ 22 5.1. Test Setup .............................................................................................................................................. 22 5.2. Limits ..................................................................................................................................................... 22 5.3. Test Procedure ..............................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 2270398R-RFUSBLEV01-A Page: 1 of 34 FCC Test Report Product Name Module Model No. MPRFMODULE1 FCC ID. MSQMPRFMODULE1 Applicant ASUSTeK Computer, Inc Address 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Date of Receipt Jul. 14, 2022 Issued Date Oct. 06, 2022 Report No. 2270398R-RFUSBLEV01-A Report Version V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2270398R-RFUSBLEV01-A Page: 2 of 34 Test Report Issued Date: Oct. 06, 2022 Report No.: 2270398R-RFUSBLEV01-A Product Name Module Applicant ASUSTeK Computer, Inc Address 1F, No. 15, Lide Rd, Beitou, Taipei, 112 Taiwan Manufacturer ASUSTeK Computer, Inc Model No. MPRFMODULE1 FCC ID. MSQMPRFMODULE1 EUT …

Text truncated - open the document above for the full version.