MSQMWT-09-H-1WT450 Wireless Optical Mouse

ENGLISH Installing the battery. Connecting to PC. WT450 Wireless Optical Mouse a b c d 1. Push upward and hold the lock switch at the back. 2 Push backward to remove the cover. 3. Insert the battery into the slot, taking note of the correct polarity. 4. Push forward and press to replace the cover. CAUTION: • The bundled battery is not chargeable. • If you do not use the mouse for a long time, remove the battery. • Use a new or similar-type battery. • RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. • DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • Operating Temperature: -20 to 55 degree; Operating Humidity: 50% 1. Insert the USB receiver into an available USB port. 2. Turn on the power switch. NOTES: • You can store the USB receiver inside the mouse. • To save power, turn off the power when you are not using the mouse. • To place the mouse in sleep mode, press the left key, right key, and scroll the wheel simultaneously. • When idle or not in use for 10 minutes, the mouse automatically turns to sleep mode. • When not moved in ten minutes, the mouse sensor will be cut off. • To wake up the muse from sleep mode, press the left key, right key or scroll wheel. Your package includes: a. 2.4GHz wireless optical mouse / b. Nano USB 2.4 GHz receiver / c. 1 x AA battery / d. User manual NCC警語 低功電波輻射性電機管理辦法第十二條: 經型式認證合格之低功率 射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 第十四條: 低功率射頻電 機之使用不得影響飛航安全及干擾合法通信；經發現現象時，應立 即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依 電信法規定作業之無線電信。低功率射頻電機需忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 Mouse dimension (mm): 110.33x56.55x35.85 Dongle dimension (mm): 23x15x7 Mouse weight: 65.5g(w/o battery) Dongle weight: 2g Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 繁體中文 安裝電池 連接到電腦 包裝內容物：a. 2.4GHz 無線 光學滑鼠 / b. Nano USB 2.4 GHz 接收器 / c. 1 x 3 號（AA 電池 / d. 使用手冊 滑鼠尺寸（mm）： 110.33x56.55x35.85 接收器尺寸（mm）： 23x15x7 滑鼠重量：65.5g（不含電池） 接收器重量：2g 1. 將滑鼠背面的開關向上推 起並按住。 2. 將上蓋向後推，移除上蓋。 3. 將電池插入電池槽，安裝 時請注意正負極。 4. 將上蓋向前推並按下，裝回 上蓋。 小心： • 附贈的電池不可充電 。 • 若長時間不使用滑鼠，請 將電池取出。 • 請使用新的或同類型的電 池。 1. 將 USB 接收器插入電腦上 的 USB 連接埠。 2. 開啟電源開關。 注意： • 您可以將 USB 接收器存放 在滑鼠內。 • 為了節省電能，在不使用滑 鼠時請關閉電源。 • 要將滑鼠進入睡眠模式， 同時按下左鍵、右鍵、與 滾輪。 • 在閒置或沒有操作 10 分 鐘後，滑鼠自動進入睡眠 模式。 • 若 10 分鐘內沒有移動，滑 鼠感應器將關閉。 • 要將滑鼠從睡眠模式喚醒， 按下左鍵、右鍵、或滾輪。 1 4 2 3 USB dongle compartment Deutsch Einlegen der Batterien Verbinden mit einem PC Italiano Installazione della batteria Connessione al PC JAPANESE 電池の取り付け PC に接続する パッケージの内容： a. 2.4GHz 光学式無線マウス/ b. 超小型レシーバ / c. 単四電池×1/ d.ユーザーマニュアル マウス本体サイズ (mm): 110.33x56.55x35.85 レシーバーサイズ (mm): 23x15x7 マウス重量: 65.5g(電池を 除く) レシーバー重量: 2g 1. マウス底面にあるロックス イッチを矢印の方向に押 します。 2. カバーを後方にスライドさ せて取り外します。 3. 電池の向きを確認し、 電池 を電池収納部に入れます。 4. カバーを前方にスライドさ せて元に戻します。 注意： • 付属の電池は充電式では ありません。 • マウスを長期間使用しな い場合は、電池を取り外し てください。 • 電池交換の際は、類似タイ プの新しい電池をご使用く ださい。 1. 超小型レシーバーを任意の USBポートに接続します。 2. マウスの電源スイッチを ONにします。. 注： • 超小型レシーバーはマウス 内部に収納可能です。 • 電力節約のため、マウス を使用しない時は、マウス の電源をOFFにしてくださ い。 • マウスをスリープモードに するには、左ボタンと右ボ タンとホイールを同時に押 します。 • マウスを使用しない状態が 10分以上続くと、マウスは 自動的にスリープモードに なります。 • マウスを動かさない状態が 10分以上続くと、マウスセ ンサーがOFFになります。 • スリープモードから復旧す るには、左ボタン、右ボタ ン、またはホイールを押しま す。 Nella confezione sono compresi: a. Mouse ottico wireless daMouse ottico wireless da 2.4GHz / b.Ricevitore Nano USB 2.4 GHz / c.1 batterie AA / d. Manuale Utente Dimensioni mouse (mm): 110.33x56.55x35.85 Dimensioni dongle (mm): 23x15x7 Peso mouse: 65.5g(senza batteria) Peso dongle: 2g 1. Spingere in avanti e trattenere il pulsante di bloccaggio sul retro del mouse. 2 Spingere all’indietro e rimuovere la copertura. 3. Inserire le batterie nelle scanalature, facendo attenzione alla polarità corretta. 4. Reinserire la copertura. ATTENZIONE: • Le batterie nella confezione non sono ricaricabili. • Se il mouse resta inutilizzato per lungo tempo, rimuovere le batterie. • Utilizzare batterie nuove o di un tipo simile. 1. Inserire il ricevitore USB in una porta USB disponibile. 2. Accendere l’interruttore di alimentazione. NOTE: • Il ricevitore USB può essere riposto all’interno del mouse. • Per risparmiare energia, disattivare l’alimentazione quando non si utilizza il mouse. • Per porre il mouse in modalità sospensione, premere simultaneamente il tasto sinistro il tasto destro e la rotellina di scorrimento. • Quando non utilizzato per dieci minuti, il mouse entra automaticamente in modalità sospensione. • Quando il mouse non è spostato per dieci minuti, si disattiva il sensore. Verpackungsinhalt: a. 2.4G Hz optische2.4G Hz optische drahtlose Maus / b. Nano-/ b. Nano-Nano- USB 2,4 GHz-Empfänger/ c.1 AA-Batterien / d. BenutzerhandbuchBenutzerhandbuch Mausabmessungen (mm): 110.33x56.55x35.85 Dongle-Abmessungen (mm): 23x15x7 Mausgewicht: 65.5g (ohne Batterie) Dongle-Gewicht: 2g 1. Schieben und halten Sie den Schließhebel an der Unterseite nach oben. 2 Schieben Sie die Abdeckung nach hinten, um zu öffnen. 3. Legen Sie die Batterien in das Fach ein und beachten Sie dabei die richtige Polung. 4. Schieben Sie die Abdeckung nach vorne, um zu schließ…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

Wt450 BLACK PID Label WT450 RED PID Label A0 LABESIZE:29.85x20.2mm WT450 MOUSE Huojin fang/4,11,2010 5849-1032-00A05849-1032-01A0 5849-1032-00A05849-1032-01A0 5849-1032-00A0 5849-1032-01A0 N 13219 R 31018 Class 1 LED Product N 13219 R 31018 Class 1 LED Product

Page 2 Page 3 Page 4

FCC ID: MSQMWT-09-H-1 Report No.: RF991013C11 Operational Description The transmitter of the EUT (WT450 Wireless Optical Mouse) is powered by 1.5Vdc from battery. The antenna is a monopole antenna without the antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF991013C11 1 Report Format Version 3.0.1 FCC TEST REPORT REPORT NO. :RF991013C11 MODEL NO. :WT450 MOUSE FCC ID :MSQMWT-09-H-1 RECEIVED :Oct. 13, 2010 TESTED :Oct. 14, 2010 ISSUED :Oct. 19, 2010 APPLICANT : ASUSTeK Computer Inc. ADDRESS : No.150, Li-Te Rd.,Peitou, Taipei, Taiwan ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 25 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF991013C11 2 Report Format Version 3.0.1 Table of Contents 1. CERTIFICATION ...........................................................................................................3 2. SUMMARY OF TEST RESULTS ...................................................................................4 2.1 MEASUREMENT UNCERTAINTY ................................................................................4 3. GENERAL INFORMATION............................................................................................5 3.1 GENERAL DESCRIPTION OF EUT..............................................................................5 3.2 DESCRIPTION OF TEST MODES................................................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ...............................................8 3.4 DESCRIPTION OF SUPPORT UNITS ..........................................................................8 4. TEST TYPES AND RESULTS .......................................................................................9 4.1 RADIATED EMISSION MEASUREMENT .....................................................................9 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................................9 4.1.2 TEST INSTRUMENTS ................................................................................................10 4.1.3 TEST PROCEDURES ................................................................................................. 11 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 11 4.1.5 TEST SETUP ..............................................................................................................12 4.1.6 EUT OPERATING CONDITIONS ................................................................................12 4.1.7 TEST RESULTS ..........................................................................................................13 4.2 BAND EDGES MEASUREMENT ................................................................................20 4.2.1 LIMITS OF BAND EDGES MEASUREMENT .............................................................20 4.2.2 TEST INSTRUMENTS ................................................................................................20 4.2.3 TEST PROCEDURE ...................................................................................................20 4.2.4 DEVIATION FROM TEST STANDARD .......................................................................20 4.2.5 EUT OPERATING CONDITION ..................................................................................20 4.2.6 TEST RESULTS ..........................................................................................................21 5. PHOTOGRAPHS OF THE TEST CONFIGURATION..................................................23 6. INFORMATION ON THE TESTING LABORATORIES ................................................24 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.........................................................................................25 Report No.: RF991013C11 3 Report Format Version 3.0.1 1. CERTIFICATION PRODUCT: WT450 Wireless Optical Mouse MODEL NO.: WT450 MOUSE BRAND: ASUS APPLICANT: ASUSTeK Computer Inc. TESTED: Oct. 14, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: WT450 MOUSE) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Oct. 19, 2010 Polly Chien / Specialist TECHNICAL ACCEPTANCE : , DATE :Oct. 19, 2010 Responsible for RF Long Chen / Senior Engineer APPROVED BY : , DATE :Oct. 19, 2010 Gary Chang / Assistant Manager Report No.: RF991013C11 4 Report Format Version 3.0.1 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD PARAGRAPH TEST TYPE RESULTREMARK 15.207 Conducted Emission Test NA Power supply is 1.5Vdc from battery. 15.209 15.249 15.249 (d) Radiated Emission Test Band Edge Measurement Limit: 50dB less than the peak value of fundamental frequency or meet radiated emission limit in section 15.209 PASS Meet the requirement of limit. Minimum passing margin is -1.6dB at 2397.50MHz. 2.1 MEASUREMENT UNCERTAIN…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST