MSQP1802TASUS Portable AiO

English User Manual ASUS Portable AiO P1802-T Series First Edition January 2014 E8685 English P1802-T ASUS Portable AiO can be used with P1802 ASUS All-in-One PC COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved. LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. SERVICE AND SUPPORT Visit our multi-language web site at http://support.asus.com English ASUS Portable AiO Table of Contents About this manual ................................................................................................................................................5 Conventions used in this manual .......................................................................................................................5 Typography .................................................................................................................................................................5 Safety information ................................................................................................................................................6 Setting up your system...........................................................................................................................................6 Care during use .........................................................................................................................................................6 Sound Pressure Warning ........................................................................................................................................7 Package contents ..................................................................................................................................................8 Chapter 1: Hardware Setup Getting to know your ASUS Portable AiO ....................................................................................................9 Front view ....................................................................................................................................................................9 Chapter 2: Using your ASUS Portable AiO Placing your ASUS Portable AiO on the table or desk .............................................................................15 Charging your ASUS Portable AiO ..................................................................................................................16 Using touch screen gestures on Android™ .................................................................................................17 Chapter 3: Working with Android™ Starting up for the first time ..............................................................................................................................21 Android™ lock screen ..........................................................................................................................................22 Unlocking your device ............................................................................................................................................22 Entering Google Now..............................................................................................................................................22 Home Screen...…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT ASUS Portable AiO Page 2 Page 3 Adapter for ASUS Portable AiO Page 4 Page 5 ASUS All-in-One PC Page 6 Page 7 Page 8 Page 9 Adapter for ASUS All-in-One PC Page 10 Page 11 Remote Controller

Label location for P1802-T Label

80 x 22.8(±0.2mm)2.4RX4 15100-08926000 50#透明龍(格底)+霧PP网卷印刷 单排卷式 底色灰(按色樣)+ PANTONE 431C 15100-08926000 D13-5119201 201-135485 電波法により５ＧＨｚ帯は屋内使用に限ります 28865/SDPPI/2013 ESD-1306925C 3568A-P1802T MSQP1802T

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22

FCC ID: MSQP1802T Report No.: RF 131204C01 Operational Description This device is an ASUS Portable AiO, which operates in 2.4GHz & 5GHz bands for WLAN and Bluetooth. The maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 19Vdc from AC Adapter or 19.5Vdc from ASUS all-in-one PC or 7.4Vdc from battery. The antenna is PIFA antenna with I-PEX MHF connector. The other instruction, please have a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 26 Report No. : SA131204C01 Issued Date : Dec. 13, 2013 Revision : R01 FCC SAR Test Report Report No. : SA131204C01 Applicant : ASUSTeK COMPUTER INC. Address : 4F, No. 150, Li-Te Rd., PEITOU, TAIPEI, TAIWAN Product : ASUS Portable AiO FCC ID : MSQP1802T Brand : ASUS Model No. : P1802-T Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r02 KDB 248227 D01 v01r02 / KDB 447498 D01 v05r01 / KDB 616217 D04 v01r01 Sample Received Date : Dec. 04, 2013 Date of Testing : Dec. 08, 2013 ~ Dec. 11, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 26 Report No. : SA131204C01 Issued Date : Dec. 13, 2013 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure ................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods…

Text truncated - open the document above for the full version.

Report No.: RF131204C01-2 1 of 72 Report Format Version 5.1.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF131204C01-2 MODEL NO.: P1802-T FCC ID: MSQP1802T RECEIVED: Dec. 04, 2013 TESTED: Dec. 18 ~ Dec. 26, 2013 ISSUED: Dec. 27, 2013 APPLICANT: ASUSTeK COMPUTER INC. ADDRESS: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131204C01-2 2 of 72 Report Format Version 5.1.0 Table of Contents RELEASE CONTROL RECORD ......................................................................................... 5 1. CERTIFICATION ...................................................................................................... 6 2. SUMMARY OF TEST RESULTS ............................................................................. 7 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 8 3. GENERAL INFORMATION ...................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 9 3.2 DESCRIPTION OF TEST MODES ......................................................................... 11 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 12 3.3 DESCRIPTION OF SUPPORT UNITS .................................................................. 16 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 16 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 17 4. TEST TYPES AND RESULTS (FOR BLUETOOTH EDR) ..................................... 18 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 18 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............. 18 4.1.2 TEST INSTRUMENTS .......................................................................................... 19 4.1.3 TEST PROCEDURES ........................................................................................... 20 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 20 4.1.5 TEST SETUP ........................................................................................................ 21 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 21 4.1.7 TEST RESULTS .................................................................................................... 22 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...................................... 30 4.2.2 TEST INSTRUMENTS .......................................................................................... 30 4.2.3 TEST PROCEDURES ........................................................................................... 31 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 31 4.2.5 TEST SETUP ........................................................................................................ 32 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 32 4.2.7 TEST RESULTS .................................................................................................... 33 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................... 37 4.3.1 LIMIT OF HOPPING FREQUENCY USED ........................................................... 37 4.3.2 TEST SETUP ........................................................................................................ 37 4.3.3 TEST INSTRUMENTS .......................................................................................... 37 4.3.4 TEST PROCEDURES ........................................................................................... 37 4.3.5 DEVIATION FROM TEST STANDARD ................................................................. 37 4.3.6 TEST RESULTS .................................................................................................... 37 4.4 DWELL TIME ON EACH CHANNEL ..................................................................... 39 4.4.1 LIMIT OF DWELL TIME USED ................................…

Text truncated - open the document above for the full version.

Report No.: RF131204C01 1 of 95 Report Format Version 5.2.0 FCC TEST REPORT (15.247) REPORT NO.: RF131204C01 MODEL NO.: P1802-T FCC ID: MSQP1802T RECEIVED: Dec. 04, 2013 TESTED: Dec. 14 ~ Dec. 19, 2013 ISSUED: Dec. 27, 2013 APPLICANT: ASUSTeK COMPUTER INC. ADDRESS: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131204C01 2 of 95 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 5 1. CERTIFICATION .......................................................................................................... 6 2. SUMMARY OF TEST RESULTS ................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 7 3. GENERAL INFORMATION .......................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 8 3.2 DESCRIPTION OF TEST MODES ............................................................................ 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................ 11 3.3 DUTY CYCLE OF TEST SIGNAL .............................................................................. 15 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................... 17 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 17 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 18 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ................................................ 19 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................... 19 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 19 4.1.2 TEST INSTRUMENTS ............................................................................................... 20 4.1.3 TEST PROCEDURES ............................................................................................... 21 4.1.4 DEVIATION FROM TEST STANDARD...................................................................... 21 4.1.5 TEST SETUP ............................................................................................................. 22 4.1.6 EUT OPERATING CONDITIONS .............................................................................. 22 4.1.7 TEST RESULTS ........................................................................................................ 23 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 37 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 37 4.2.2 TEST INSTRUMENTS ............................................................................................... 37 4.2.3 TEST PROCEDURES ............................................................................................... 38 4.2.4 DEVIATION FROM TEST STANDARD...................................................................... 38 4.2.5 TEST SETUP ............................................................................................................. 38 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 38 4.2.7 TEST RESULTS ........................................................................................................ 39 4.3 6dB BANDWIDTH MEASUREMENT ......................................................................... 43 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ...................................................... 43 4.3.2 TEST SETUP ............................................................................................................. 43 4.3.3 TEST INSTRUMENTS ............................................................................................... 43 4.3.4 TEST PROCEDURE .................................................................................................. 43 4.3.5 DEVIATION FROM TEST STANDARD...................................................................... 43 4.3.6 EUT OPERATING CONDITIONS .…

Text truncated - open the document above for the full version.

Report No.: RF131204C01-1 1 of 54 Report Format Version 5.2.0 FCC TEST REPORT (15.407) REPORT NO.: RF131204C01-1 MODEL NO.: P1802-T FCC ID: MSQP1802T RECEIVED: Dec. 04, 2013 TESTED: Dec. 14 ~ Dec. 20, 2013 ISSUED: Dec. 27, 2013 APPLICANT: ASUSTeK COMPUTER INC. ADDRESS: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131204C01-1 2 of 54 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 10 3.3 DUTY CYCLE OF TEST SIGNAL ............................................................................... 12 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 16 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 16 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 17 4. TEST TYPES AND RESULTS .................................................................................... 18 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................... 18 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................. 18 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .............. 18 4.1.3 TEST INSTRUMENTS .......…

Text truncated - open the document above for the full version.