MVASP1792A-001R900 MHz Wireless Speaker

P. 6 OPERATION 1. Turn on the audio source to which the transmitter is connected. 2. Set volume of audio source to 75% to send a strong consistent signal to the transmitter. 3. Set the POWER switch on the back of the transmitter to the ON position. The LED on the transmitter will show a steady BLUE light if the source signal is strong enough or flash if the transmitter requires a higher source device volume level. 4. Select the channel 1 or 2 of the transmitter for best performance in your location. 5. Turn on the speaker and adjust the volume to the desired listening level. Volume can be adjusted up by pressing “+” button or down by pressing the “-“ button to the desired listening level, or you can press the “+” button or “-“ button” on the remote control unit to adjust the volume level. 6. Press the “AUTO TUNE” button to get the best tuning reception from your speakers. When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected. Tuning process can also be activated by pressing the “AUTO TUNE” button on the remote control unit. NOTE : a.) During initial setup keep the Speakers 21 feet (or less) away from the transmitter, and press “AUTO TUNE” button for the best reception. P. 7 b.) Whenever you find frequency jam, select other Channels on the transmitter, and then press the “AUTO-TUNE” button again. c.) Low or distorted sound on speakers or with a transmitter powered by batteries can be caused by batteries that are discharged or have low capacity. Test by removing batteries and connecting the AC power adapter or using a fresh set of batteries. Battery Precautions If using batteries in the transmitter or speakers - Only use AA batteries in the transmitter, C cell batteries in the speaker, and AAA batteries in the remote control. - Batteries may leak or explode if inserted improperly, disposed of in fire, or mixed with different types. - Alkaline batteries may leak or explode if placed in a battery charger. - When installing batteries, observe proper +/- polarities. Batteries positioned incorrectly may leak and cause damage to the unit. - Never attempt to recharge conventional dry cell batteries. - Replace only with fresh, new batteries.

Uni-Art Precise Products Ltd 11-12/F,Yue Xiu Industrial Building,87 Hung To Road,Kowloon,Hong Kong FCC Authorization Letter Number: CF304 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name Uni-Art Precise Products Ltd Address 11-12/F,Yue Xiu Industrial Building,87 Hung To Road,Kowloon,Hong Kong City Hongkong Country declare that the following representative (agent): Name (person) Aven zhou Function Supervisor Company name Compliance Certification Services (Shenzhen) Inc. Addresss No10-1, Mingkeda Logistics Park, No.18 Huanguan South RD. Guan lan Town, Baoan District, Shenzhen China City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description 900MHz Wireless Speaker Type or Model(s) SP1790A Tradename or Brand(s) ARKON We also authorize Teleconformity, Mr. M. Koop, (address: Rietven 31, 7534NH Enschede, Netherlands) to process this application. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Hongkong June 12th,2012 Simon Chan Sales Manager

Uni-Art Precise Products Ltd 1 1-12/F,Yue Xiu Industrial Building,87 Hung To Road,Kowloon,Hong Kong FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Uni-Art Precise Products Ltd Addresss 11-12/F,Yue Xiu Industrial Building,87 Hung To Road,Kowloon,Hong Kong City Hongkong Country request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: MVA SP1792A-001R of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) Operational Description Block Diagrams Schematics Diagrams Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Hongkong June 12th,2012 Simon Chan Sales Manager

ReportNo.:SZ120426B02-EF Page 1/9 ReportNo.:SZ120426B02-EF Page 2/9 ReportNo.:SZ120426B02-EF Page 3/9 ReportNo.:SZ120426B02-EF Page 4/9 Adapter 1 ReportNo.:SZ120426B02-EF Page 5/9 Adapter 2 ReportNo.:SZ120426B02-EF Page 6/9 Adapter 3 ReportNo.:SZ120426B02-EF Page 8/9 ReportNo.:SZ120426B02-EF Page 9/9

Label Location label location

Report No.: SZ120426B02-EF Page 1/9 Remote Control Report No.: SZ120426B02-EF Page 2/9 Report No.: SZ120426B02-EF Page 3/9 RX Report No.: SZ120426B02-EF Page 4/9 Report No.: SZ120426B02-EF Page 5/9 Report No.: SZ120426B02-EF Page 6/9 Report No.: SZ120426B02-EF Page 7/9 Report No.: SZ120426B02-EF Page 8/9 Report No.: SZ120426B02-EF Page 9/9

Report No: SZ120426B02-EF FCC ID: MVASP1792A-001R Page 1 / 20 FCC 47 CFR PART 15 SUBPART B TEST REPORT for Issued for Uni-Art Precise Products Ltd 11-12/F, Yue Xiu Industrial Building, 87 Hung To Road, Kowloon, Hong Kong Issued By: Compliance Certification Services Inc . No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen, China TEL: 86-755-28055000 FAX: 86-755-28055221 E-Mail: [email protected] Issued Date: June 5, 2012 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test result of this report relate only to the tested sample identified in this report. 900MHz Wireless Speaker Model: SP1790A Brand: ARKON Test Report Number: SZ120426B02-EF Report No: SZ120426B02-EF FCC ID: MVASP1792A-001R Page 2 / 20 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue No Revisions Effect Page Revised By 00 SZ120426B02-EF Initial Issue ALL Amay Tang Report No: SZ120426B02-EF FCC ID: MVASP1792A-001R Page 3 / 20 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION............................................................................4 2 EUT DESCRIPTION ................................................................................................5 3 TEST METHODOLOGY ..........................................................................................6 3.1. DECISION OF FINAL TEST MODE ....................................................................................................6 3.2. EUT SYSTEM OPERATION ............................................................................................................... 6 4 SETUP OF EQUIPMENT UNDER TEST.................................................................7 4.1. DESCRIPTION OF SUPPORT UNITS................................................................................................ 7 4.2. CONFIGURATION OF SYSTEM UNDER TEST ................................................................................ 7 5 FACILITIES AND ACCREDITATIONS ...................................................................8 5.1. FACILITIES ......................................................................................................................................... 8 5.2. ACCREDITATIONS............................................................................................................................. 8 5.3. MEASUREMENT UNCERTAINTY ...................................................................................................... 8 6 CONDUCTED EMISSION MEASUREMENT ..........................................................9 6.1. LIMITS OF CONDUCTED EMISSION MEASUREMENT................................................................... 9 6.2. TEST INSTRUMENTS ........................................................................................................................ 9 6.3. TEST PROCEDURES ....................................................................................................................... 10 6.4. TEST SETUP .................................................................................................................................... 11 6.5. DATA SAMPLE ................................................................................................................................. 11 6.6. TEST RESULTS ................................................................................................................................ 12 7 RADIATED EMISSION MEASUREMENT.............................................................14 7.1. LIMITS OF RADIATED EMISSION MEASUREMENT...................................................................... 14 7.2. TEST INSTRUMENTS ...................................................................................................................... 15 7.3. TEST PROCEDURES ....................................................................................................................... 16 7.4. TEST SETUP .................................................................................................................................... 17 7.5. DATA SAMPLE ................................................................................................................................. 18 7.6. TEST RESULTS ................................................................................................................................ 19 Report No: SZ120426B02-EF FCC ID: MVASP1792A-001R Page 4 / 20 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1 TEST RESULT CERTIFICATION Product 900MHz Wireless Speaker Model SP1790A Brand ARKON Applicant Uni-Art Precise Products Ltd 11-12/F, Yue Xiu Industrial Building, 87 Hung To Road, Kowloon, Hong Kong Manufacturer Uni-Art Precise Products Ltd 11-12/F, Yue Xiu Industrial Building, 87 Hung To Road, Kowloon, Hong Kong Tested April 26~June 1, 2012 Test Voltage AC120V/60Hz EMISSION Standard Item ResultRemarks Conducted (Power Port) PASS Meet Class B limit FCC 47 CFR Part 15 Subpart B ANSI C63.4: 2009 Radiated PASS Meet Class B limit Note: 1. The statements of test result on the above are decided by the request of test standard only; the measurement uncertainties are not factored into this compliance determination. 2. The information of measurement uncertainty is available upon the customer’s request. Deviation from Applicable Standard None The above equipment has been tested by C…

Text truncated - open the document above for the full version.

Report No.:SZ120426B02-EF FCC ID: MVASP1792A-001R Page 1/2 ; PHOTOGRAPHS OF THE TEST CONFIGURATION Radiated Emissions Setup Photos Below 1 GHz Above 1 GHz Report No.:SZ120426B01-EF FCC ID: MVASP1792A-001R Page 2/2 . Power Line Conducted Emissions Setup Photos