
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
User Manual Kinetic Chain Analyzer SAFETY PRECAUTION Please read all safety information prior to using K inetic Chain Analyzer. Failure to do so may result in unnecessary injury. 1. Operate the device only as intended. Do not use f or any other purpose. 2. Do not place heavy objects on the device and keep the device away from humid, dusty and environments. 3. Do not use water, Clean the surface with a soft c loth. 4. Do not push the button hard. 5. The device’s operate & storage temperature is bet ween -10ºC ~ 60ºC. Keep away from heat or cold. 6. Be careful not to drop the device. BATTERY AND CHARGING 1. Do not attempt to replace Kinetic Chain Sensor’s battery. It is not user serviceable 2. Only use the supplied Kinetic Chain Receiver to c harge. 3. Only use the supplied power adapter. 4. Do not charge Kinetic Chain Sensor in extremely h ot or cold temperatures. 5. Do not charge Kinetic Chain Sensor when it is wet to avoid electric shock. 6. Do not dispose of Kinetic Chain Sensor in a fire. The battery could explode causing injury or death. Table of Contents Introduction & specification Device and Accessories How to charge the device How to Power ON Introduction & specification weight(g) weight(g)weight(g)weight(g) Kinetic Chain Receiver : 165g Kinetic Chain Receiver : 165gKinetic Chain Receiver : 165gKinetic Chain Receiver : 165g Kinetic Chain Sensor : 27g Kinetic Chain Sensor : 27gKinetic Chain Sensor : 27gKinetic Chain Sensor : 27g Connectivity ConnectivityConnectivityConnectivity Micro USB 5pin Micro USB 5pinMicro USB 5pinMicro USB 5pin Wireless RF Wireless RFWireless RFWireless RF 2.4GHz 2.4GHz 2.4GHz 2.4GHz Operation OperationOperationOperation time timetimetime 4 h 4 h4 h4 h (continuously) (continuously)(continuously)(continuously) Charging time Charging timeCharging timeCharging time 1h 30min 1h 30min1h 30min1h 30min USB port USB portUSB portUSB port Micro USB 5pin for PC Micro USB 5pin for PCMicro USB 5pin for PCMicro USB 5pin for PC Size(mm) Size(mm)Size(mm)Size(mm) Kinetic Chain Receiver : 187 * 94 * 35.5 Kinetic Chain Receiver : 187 * 94 * 35.5Kinetic Chain Receiver : 187 * 94 * 35.5Kinetic Chain Receiver : 187 * 94 * 35.5 Kinetic Chain Sensor : 60 Kinetic Chain Sensor : 60Kinetic Chain Sensor : 60Kinetic Chain Sensor : 60 * 39 * 14 * 39 * 14* 39 * 14* 39 * 14 Operating temp Operating tempOperating tempOperating temp 0 000° °°°C ~ 55 C ~ 55C ~ 55C ~ 55° °°°C CCC Storage StorageStorageStorage temp temptemptemp - ---10 101010° °°°C ~ 60 C ~ 60C ~ 60C ~ 60° °°°C CCC Specification Device and Accessories 1. Kinetic Chain Receiver 2. Kinetic Chain Sensor 3. USB cable 4. AC Adapter & Power cable How to charge the device 1. Connect AC adapter to Kinetic Chain Receiver 2. Connect Kinetic Chain Sensor to Kinetic Chain Re ceiver 3. Red light turn on 4. Charging finished 5. Red light turn off and Green light turn on Power On status: To see if the power of sensor is o n, gently press the button and let go. if the green light comes on, the sensor is on. Power Off status: do same as above, if light does n ot come on, the power of sensor is off. How to Turn On/Off the sensors : to turn on/off the sensors, press the button and hold for 3 seconds. if the LED light comes on blinking twice, the sensor is turned on. if the light goes off, the sensor is turned off. * Please check battery in case sensor could not be turned on. putting the sensor in the KC receiver to charge when it is not in use is recomme nded. How to Power ON
SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 (April 02, 2015) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Golfzon Co., Ltd. hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (Kinetic Chain Analyzer Receiver, KNCR01) FCC ID: N5Y-KNCR01 Sincerely, ______________________________ Client’s signature: Client’s name / title: JongSun, Kim / Advisory Research Engineer Contact information / address: Golfzon Co., Ltd / 898 Taprip-Dong, Yuseong-gu, Daejeon, 305-510, Korea Telephone: +82-70-8660-4076 Fax No.: +82-42-671-1247 E-mail: [email protected]
SCS-F19: Confidentiality Request Letter Page 2 of 4 Rev 4.0 (April 02, 2015) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: N5Y-KNCR01 We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ______________________________ Client’s signature: Client’s name / title: JongSun, Kim / Advisory Research Engineer Contact information / address: Golfzon Co., Ltd / 898 Taprip-Dong, Yuseong-gu, Daejeon, 305-510, Korea Telephone: +82-70-8660-4076 Fax No.: +82-42-671-1247 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 4 Rev 4.0 (April 02, 2015) To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: N5Y-KNCR01 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - e.g. User Manual - etc. External Photos - etc. Internal Photos - etc. Setup Photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ______________________________ Client’s signature: Client’s name / title: JongSun, Kim / Advisory Research Engineer Contact information / address: Golfzon Co., Ltd / 898 Taprip-Dong, Yuseong-gu, Daejeon, 305-510, Korea Telephone: +82-70-8660-4076 Fax No.: +82-42-671-1247 E-mail: [email protected]
Page 1 of 6 Page 2 of 6 Page 3 of 6 Page 4 of 6 Page 5 of 6 Page 6 of 6
Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : N5Y-KNCR01
Page 1 of 3 Page 2 of 3 Antenna 3 Page 3 of 3 Antenna 1 Antenna 2
Page 1 of 7 Report No. : E151R-095 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : E151R-095 AGR No. : A14NA-046R Applicant : Golfzon Co., Ltd. Address : 898, Taprip-dong, Yuseong-gu, Daejeon, South Korea Manufacturer : Golfzon Co., Ltd. Address : 898, Taprip-dong, Yuseong-gu, Daejeon, South Korea Type of Equipment : Kinetic Chain Analyzer Receiver FCC ID. : N5Y-KNCR01 IC Certification No. : 10324A-KNCR01 Model Name : KNCR01 Serial number : N/A Total page of Report : 7 pages (including this page) Date of Incoming : January 28, 2014 Date of issue : December 01, 2014 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 and IC RSS-Gen Issue 4, November 2014 and RSS 210 Issue 8, December 2010 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Prepared by: Approved by: Ki-Hong, Nam / Senior Engineer Sung-ik, Han/ Managing Director ONETECH Corp. ONETECH Corp. Page 2 of 7 Report No. : E151R-095 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. RADIO FREQUENCY EXPOSURE ................................................................................................................................ 6 4.1 RF EXPOSURE LIMIT ..................................................................................................................................................... 6 4.2 EUT DESCRIPTION ......................................................................................................................................................... 6 4.3 TEST RESULT ................................................................................................................................................................. 7 Page 3 of 7 Report No. : E151R-095 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) Revision History Issued Report No. Issued Date Revisions Effect Section E151R-095 December 01, 2014 Initial Issue All Page 4 of 7 Report No. : E151R-095 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) 1. VERIFICATION OF COMPLIANCE Applicant : Golfzon Co., Ltd. Address : 898, Taprip-dong, Yuseong-gu, Daejeon, South Korea Contact Person : Jaewoo Lee / Senior Research Engineer Telephone No. : +82-70-8660-4076 FCC ID : N5Y-KNCR01 IC CERTIFICATION NO. : 10324A-KNCR01 Model Name : KNCR01 Serial Number : N/A Date : December 01, 2014 EQUIPMENT CLASS FCC: DTS – DIGITAL TRNSMISSION SYSTEM IC: Low Power License-Exempt Radio-communication Device E.U.T. DESCRIPTION Kinetic Chain Analyzer Receiver THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES ANSI C63.10: 2013 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification EQUIPMENT WILL BE OPERATED UNDER FCC RULES PART(S) FCC PART 15 SUBPART C Section 15.247 and RSS 210 Issue 8 December 2010, RSS-Gen Issue 4 November 2014. Modifications on the Equipment to Achieve Compliance None Final Test was Conducted On 3 m, Semi Anechoic Chamber -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC& IC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. Page 5 of 7 Report No. : E151R-095 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) 2. GE…
Text truncated - open the document above for the full version.
Page 1 of 113 Report No. : E151R-094 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : E151R-094 AGR No. : A14NA-046R Applicant : Golfzon Co., Ltd. Address : 898, Taprip-dong, Yuseong-gu, Daejeon, South Korea Manufacturer : Golfzon Co., Ltd. Address : 898, Taprip-dong, Yuseong-gu, Daejeon, South Korea Type of Equipment : Kinetic Chain Analyzer Receiver FCC ID. : N5Y-KNCR01 IC Certification No. : 10324A-KNCR01 Model Name : KNCR01 Serial number : N/A Total page of Report : 113 pages (including this page) Date of Incoming : January 28, 2014 Date of issue : December 01, 2014 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 and IC RSS-Gen Issue 4, November 2014 and RSS 210 Issue 8, December 2010 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Prepared by: Approved by: Ki-Hong, Nam / Senior Engineer Sung-ik, Han/ Managing Director ONETECH Corp. ONETECH Corp. Page 2 of 113 Report No. : E151R-094 It should not be reproduced except in full, without the written approval of ONETECH Corp. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 6 2. TEST SUMMARY .............................................................................................................................................................. 7 2.1 TEST ITEMS AND RESULTS ............................................................................................................................................. 7 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ........................................................................................... 7 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 7 2.4 PURPOSE OF THE TEST ................................................................................................................................................... 7 2.5 TEST METHODOLOGY .................................................................................................................................................... 7 2.6 TEST FACILITY ............................................................................................................................................................... 7 3. GENERAL INFORMATION ............................................................................................................................................ 8 3.1 PRODUCT DESCRIPTION ................................................................................................................................................. 8 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 8 4. EUT MODIFICATIONS .................................................................................................................................................... 8 5. SYSTEM TEST CONFIGURATION ............................................................................................................................... 9 5.1 JUSTIFICATION ............................................................................................................................................................... 9 5.2 PERIPHERAL EQUIPMENT .............................................................................................................................................. 9 5.3 MODE OF OPERATION DURING THE TEST ...................................................................................................................... 9 5.4 CONFIGURATION OF TEST SYSTEM ............................................................................................................................. 10 5.5 ANTENNA REQUIREMENT ............................................................................................................................................ 10 6. PRELIMINARY TEST .................................................................................................................................................... 11 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ....................................................................................................... 11 6.2 GENERAL RADIATED EMISSIONS TESTS ..................................................................................................................... 11 7. MIMIMUM 6 DB BANDWIDTH & 99 % OCCUPIED BANDWIDTH .................................................................... 12 7.1 OPERATING ENVIRONMENT ......................................................................................................................................... 12 7.2 TEST SET-UP ................................................................................................................................................................. 12 7.3 TEST EQUIPMENT USED ....................................................................................................................…
Text truncated - open the document above for the full version.
Page 1 of 3 - Conducted Emission Test Page 2 of 3 - Radiated Emission Test Page 3 of 3
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 720.00 µW |

Kinetic Chain Analyzer Sensor
Equipment Class
DTS - Digital Transmission System
Personal Swing analyzer
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
UHF RFID Reader
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Low Power Communication Device
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter