N9STY-S-002Music Box

USER MANUAL SKU NO.: 1001378629 MODEL # TY-S-002 Package Contents Indoor Bluetooth Speaker (with power cord) Referenced Qualified Design ID(s): 53438 1 1Instruction Manual Music Box IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b) Do not use this seasonal product outdoors. This product is intended for Indoor Use or Covered Outdoor Use (i.e. Patio, Covered Entry, Covered Porch, etc.) c) This seasonal use product is not intended for permanent installation or use. d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f) Do not let lamps rest on the supply cord or on any wire. g) It is best to unplug the product when leaving the house, when retiring for the night or if the product will be left unattended for an extended period of time. h) This is an electric product-not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it. i) Do not use this product for other than its intended use. j) Do not hang ornaments or other objects form the cord, 2 wire or light strings or lighting outfits attached. k) Do not close doors or windows on the products power cord as this may damage the wire insulation. l) Do not cover the product with cloth, paper or any material not part of the product when in use. m) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outletreverse the plug. If it still does not fit DO NOT force it. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug. n) This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also, unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should not be used. o) Read and follow all instructions that are on the product or provided with the product. p) SAVE THESE INSTRUCTIONS Use and Care Instructions a) Be sure to place the product on a stable setting when in use. Always think safety first when plugging in lights and lighting outfits in the product. b) b) Before using or re-usinginspect the product carefully. 3 Do not use any products that have cut, damagedor frayed wire insulation on cords, cracks in the lampholders or enclosures, loose connections or exposed copper wire. c) When storing the product, carefully remove the product from wherever it is placed. Try to avoid any undue strain or stress on the product power cord, connections and wires. d) When not in use, store neatly in a cool, dry location protected from sunlight. User Servicing Instructions Replace the fuse CAUTION:Ensure the product is disconnected from the power source before attempting to service. Use only approved fuses. Do not replace the attachment plug as it contains a safety device (fuse) that should not be removed. a) Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord. b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. c) Remove fuse carefully. d) Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse (provided with product). 4 5A fuse e) Close fuse cover. Slide close the fuse access cover on top of attachment plug. f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. CAUTION: 1.To reduce the risk of fire and electric shock: a) Do not mount or support the product or attached lighting strings or lighting outfits in a manner that can cut or damage wire insulation. Model No. TY-S-002 FCC / Canada IC Statement: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant To Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.)This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: “Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” CAUTION: Do not overload. Do not connect more lighting strings, decorative products, or other products than recommended. Ensure the maximum total wattage plugged into the Mus…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 TOYO ELECTRIC MFG. CO., LTD 9TH,FL 30 SEC 3 RENAI RD DAAN DISTRICT, TAIPEI 106 TAIWAN 2015-3-12 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, TOYO ELECTRIC MFG. CO., LTD hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: N9STY-S-002 Model: TY-S-002 Product name: Music Box Sincerely, signature : name / title: Dennis Wang / Manager address: 9TH,FL 30 SEC 3 RENAI RD DAAN DISTRICT, TAIPEI 106 TAIWAN

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 TOYO ELECTRIC MFG. CO., LTD 9TH,FL 30 SEC 3 RENAI RD DAAN DISTRICT, TAIPEI 106 TAIWAN 2015-3-12 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: N9STY-S-002 We hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, signature : name / title: Dennis Wang / Manager address: 9TH,FL 30 SEC 3 RENAI RD DAAN DISTRICT, TAIPEI 106 TAIWAN

Label location

Antenna location

FCC ID: N9STY-S-002 RF EXPOSURE REPORT for TOYO ELECTRIC MFG. CO., LTD Music Box Model Number: TY-S-002 FCC ID: N9STY-S-002 Prepared for : TOYO ELECTRIC MFG. Co., LTD Address : 9TH,FL 30 SEC 3 RENAI RD DAAN DISTRICT, TAIPEI 106 TAIWAN Prepared by : Keyway Testing Technology Co., Ltd. Address : Building 1, Baishun Industrial Zone, Zhangmotou Town Dongguan, Guangdong, China Standard : The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Tested by: : Approved by: Jack Bu Jade Yang Date: Mar. 6~10, 2015 : Mar. 11, 2015 FCC ID: N9STY-S-002 Test Result of RF Exposure Evaluation 1.1. limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. FCC ID: N9STY-S-002 1.3. Test Result of RF Exposure Evaluation Target power W/ tolerance (dBm) Max tune up power tolerance (dBm) Output power to antenna (mW) Antenna Gain(dBi) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 1 ±1.0 2.0 1.58 0.0 0.00032 1.0 Pass

FCC ID: N9STY-S-002 IC: 11065A-TYS002 Keyway Testing Technology Co., Ltd. Report No. 15KWE032336F Page 1 of 33 FCC TEST REPORT(Bluetooth) for TOYO ELECTRIC MFG. Co., LTD Music Box Model Number: TY-S-002 FCC ID: N9STY-S-002 IC: 11065A-TYS002 Prepared for : TOYO ELECTRIC MFG. Co., LTD Address : 9TH,FL 30 SEC 3 RENAI RD DAAN DISTRICT, TAIPEI 106 TAIWAN Prepared by : Keyway Testing Technology Co., Ltd. Address : Baishun Industrial Zone, Zhangmutou Town, Dongguan, Guangdong, China Tel: 86-769-8718 2258 Fax: 86-769-8718 1058 Report No. : 15KWE032336F Date of Test : Mar. 6~10, 2015 Date of Report : Mar. 11, 2015 FCC ID: N9STY-S-002 IC: 11065A-TYS002 Keyway Testing Technology Co., Ltd. Report No. 15KWE032336F Page 2 of 33 TABLE OF CONTENTS Test Report Declaration Page 1. TEST SUMMARY .......................................................................................................................... 4 2. GENERAL PRODUCT INFORMATION ......................................................................................... 4 2.1. Product Function .................................................................................................................... 4 2.2. Description of Device (EUT) .................................................................................................. 4 2.3. Difference between Model Numbers ...................................................................................... 4 2.4. Independent Operation Modes .............................................................................................. 4 2.5. Test Supporting System ......................................................................................................... 4 3. TEST SITES .................................................................................................................................. 5 3.1. Test Facilities ......................................................................................................................... 5 3.2. List of Test and Measurement Instruments ............................................................................ 6 4. TEST SET-UP AND OPERATION MODES .................................................................................. 7 4.1. Principle of Configuration Selection ....................................................................................... 7 4.2. Block Diagram of Test Set-up ................................................................................................ 7 4.3. Test Operation Mode and Test Software ............................................................................... 7 4.4. Special Accessories and Auxiliary Equipment ....................................................................... 7 4.5. Countermeasures to Achieve EMC Compliance .................................................................... 7 5. MAXIMUM PEAK OUTPUT POWER ............................................................................................ 8 5.1. Limits ...................................................................................................................................... 8 5.2. Test setup .............................................................................................................................. 8 6. EMISSION TEST RESULTS ......................................................................................................... 9 6.1. Conducted Emission at the Mains Terminals Test ................................................................. 9 6.2. Radiated Emission Test ....................................................................................................... 12 7. 20DB OCCUPY BANDWIDTH ..................................................................................................... 19 7.1. Limits .................................................................................................................................... 19 7.2. Test setup ............................................................................................................................ 19 8. FREQUENCY SEPARATION ...................................................................................................... 21 8.1. Limits .................................................................................................................................... 21 8.2. Test setup ............................................................................................................................ 21 9. NUMBER OF HOPPING FREQUENCY ...................................................................................... 23 9.1. Limits .................................................................................................................................... 23 9.2. Test setup ............................................................................................................................ 23 10. DWELL TIME ........................................................................................................................... 25 10.1. Limits .................................................................................................................................... 25 10.2. Test setup ............................................................................................................................ 25 11. BAND EDGE COMPLIANCE TEST ......................................................................................... 28 11.1. Limits .................................................................................................................................... 28 11.2. Test setup ............................................................................................................................ 28 12. ANTENNA REQUIREMENTS .................................................................................................. 29 12.1. Limits .........................................................................…

Text truncated - open the document above for the full version.

Conducted Emission Test Radiated Emission Test