NCI-M360-M500-TAI Safety System(A device support WCDMA/LTE,2.4G&5G WIFI,BT/BLE bands.)

i VIA Mobile360 M500 AI Safety System User Manual ii Overview Mobile360 M500 is a smart on-board The AI Safety System monitoring device specially designed for industrial vehicles, such as stackers, forklifts and other engineering equipment. It can detect the dangerous state of the work area in real time and provide warnings to improve the safety of the operation of engineering vehicles. An indispensable security system in the era of smart industry. The AI Safety System monitoring function mainly uses three independent monitors, combined with deep learning calculations to complete machine vision recognition. Two of the ultra-wide-angle monitors with supplemental light design are installed on the front and rear of the forklift. They can provide safety detection even in poorly lit environments and assist operators in seeing blind spots near the vehicle during work. In addition, a monitor equipped with infrared supplement light can detect the fatigue of the operator at the same time, and can correctly identify the status of the personnel under various light conditions. If equipped with basic vehicle accessories such as display screen, speed sensor, seat belt, etc., it can analyze the status inside and outside the vehicle and the operator, and can send out visual and sound alarm reminders in time. The screen display can help the operator see the visual blind angle reduces the occurrence of industrial safety accidents and improves the working safety of forklifts. M500 power supply adopts wide-voltage design, which can cover most of the different types of forklifts on the market. Because the iii working environment of this kind of engineering vehicles is often harsh, such as high temperature, high humidity and a large amount of dust, etc., the main body, connector Including peripheral equipment, IP67 protection specifications are used to ensure that the system can operate normally in harsh environments. iv Contents Overview ............................................................................................................. ii Contents ............................................................................................................. iv 1. Specifications ............................................................................................ 1 2. Accessories ................................................................................................ 1 3. Operating Temp ........................................................................................ 2 4. Appearance Description ........................................................................ 3 4.1 Front Panel ......................................................................................... 3 4.2 Back Panel .......................................................................................... 3 5. Installation Instructions ........................................................................ 4 5.1 Host Installation ............................................................................... 4 5.2 Installation Mobile APP .................................................................. 5 5.3 Power Instructions .......................................................................... 5 5.4 Camera Installation Instructions ............................................... 6 5.5 Speaker Installation Instructions .............................................. 7 5.6 Antenna Installation Instructions .............................................. 7 5.7 Bracket Installation Instructions ............................................... 8 5.8 LCD Display Installation Instructions ...................................... 9 6．Start Using M500 ...................................................................................... 9 6.1 LED Indicator Status Description .............................................. 9 6.2 Warning Description ..................................................................... 10 6.3 Calibration Method Description ................................................ 11 6.3.1 Online Way ........................................................................... 11 6.3.2 Front And Rear Camera Security Zone Calibration ...................................................................................................................... 12 v 6.3.2.1 Express Calibration ............................................... 13 6.3.2.2 Custom Calibration ............................................... 15 6.3.3 Driver Camera Calibration ............................................. 16 6.3.4 Seat Belt Settings ............................................................. 17 6.3.5 System Setting ................................................................... 18 6.3.6 Album ..................................................................................... 19 6.3.7 System Information.......................................................... 20 6.3.8 System Upgrade ................................................................ 21 6.4 LCD Display Description .............................................................. 22 6.4.1 LCD Display Note ............................................................ 22 6.5 Record Save Description .......................................................... 23 1 1. Specifications Item Description Memory 1GB memory Storage 512MB ROM Audio Power 2W / 4 OHM External speaker Wireless Communication WIFI 802.11a/b/g/n/ac 4G LTE GPS/Beidou BT 5.0 Power DC9-36V Operating System Embedded Linux Dimensions 178mm x 164mm x 52.8mm 2. Accessories Item Description Front Camera (Aviation connector) Lens 6G ,F2.3, D:190° V:110.8° H:180°, WALH Fill light White LED AHD@720P Waterproof Rating IP67 Rear Camera (Aviation connector) Lens 6G ,F2.3, D:190° V:110.8° H:180°, WALH Fill light White LED AHD@720P Waterproof Rating IP67 Inside Camera (Aviation connector) Lens 6G ,F2.3, D:68° V:33° H:59° Fill light IR LED AHD@720P Waterproof Rating IP67 2 Speaker (Aviation connector) …

Text truncated - open the document above for the full version.

Rev 1/26/2023 VIA Technologies, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Company name: VIA Technologies, Inc. Address: 8F, No.535, Zhongzheng Rd., Xindian Dist, New Taipei, Taiwan Product Name: AI Safety System FCC ID: NCI-M360-M500-T Model(s): Mobile360 M500-T Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing We, [ VIA Technologies, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Yours Sincerely, Name: Mirror Hu Date: 2024.06.24 Title: Engineer Signature of applicant:

Rev 1/26/2023 VIA Technologies, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Company name: VIA Technologies, Inc. Address: 8F, No.535, Zhongzheng Rd., Xindian Dist, New Taipei, Taiwan Product Name: AI Safety System FCC ID: NCI-M360-M500-T Model(s): Mobile360 M500-T Ref: Attestation Statements Part 2.911(d)(5)(i) Filing We, [ VIA Technologies, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Yours Sincerely, Name: Mirror Hu Date: 2024.06.24 Title: Engineer Signature of applicant:

Rev 1/26/2023 VIA Technologies, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024.06.24 Company name: VIA Technologies, Inc. Address: 8F, No.535, Zhongzheng Rd., Xindian Dist, New Taipei, Taiwan FRN: 0015296189 Contact Person: Mirror Hu Tel.: 886-2-2218-5452 Email: [email protected] Product Name: AI Safety System FCC ID: NCI-M360-M500-T Model(s): Mobile360 M500-T Ref: Attestation Statements Part 2.911(d)(7) Filing We, [ VIA Technologies, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, FCC US Agent, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. [ VIA Technologies, Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. FCC US Agent, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information Company Name: FCC US Agent, LLC Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Tel.: 708-571-3148 Email: [email protected] FRN: 0033402884 Sincerely, Applicant printed name: Mirror Hu U.S. Agent printed name: Tim Payne Applicant signature: U.S. Agent signature:

VIA Technologies, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024/06/24 Subject; Request for Confidentiality FCC ID: NCI-M360-M500-T To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram BOM List Block Diagram Operational Description Tune up procedure Software Security Info In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Mirror Hu

VIA Technologies, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024/06/24 SUBJECT: FCC Application for (FCC ID: NCI-M360-M500-T) To Whom It May Concern: We, the undersigned, hereby authorize _ CCIC Southern Testing Co., Ltd._ (Chris You)__ at _ Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China _ on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by __Chris You__ on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature： Contact Person: Mirror Hu Title: Engineer Company: VIA Technologies, Inc. Address: 8F, No.535, Zhongzheng Rd., Xindian Dist, New Taipei, Taiwan Tel: 886-2-2218-5452 E-Mail: [email protected]

ANTENNA

Report No.: 20240417G06070X -W1 CCIC-SET/TRF: GJ-EMC-E (2024-04-29) Page 1 of 21 EMC TEST REPORT Report No.: 20240417G06070X -W1 Product Name: AI Safety System FCC ID NCI-M360-M500-T IC ID 6673A-M500-T Model No. : Mobile360 M500-T Applicant: VIA Technologies, Inc Address: 8F., NO. 535, ZHONGZHENG RD., XINDIAN DIST., NEW TAIPEI CITY 23148, TAIWAN Received Date: 2024.04.09 Dates of Testing: 2024.04.11~2024.04.18 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building, No. 43, Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel: 86-755-26627338 E-Mail：[email protected] This test report consists of 21 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No.: 20240417G06070X -W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 2 of 21 Test Report Product Name ....................... : AI Safety System Model No. ............................ : Mobile360 M500-T Trade name VIA Applicant ............................... : VIA Technologies, Inc Applicant Address................ : 8F., NO. 535, ZHONGZHENG RD., XINDIAN DIST., NEW TAIPEI CITY 23148, TAIWAN Manufacturer ........................ : VIA Technologies, Inc Manufacturer Address ......... : 8F., NO. 535, ZHONGZHENG RD., XINDIAN DIST., NEW TAIPEI CITY 23148, TAIWAN Test Standards ...................... : ICES-003 Issue 7 47 CFR Part 15 Subpart B Test Result ............................ : PASS Tested by ............................. : Sun Jiaohui Test Engineer 2024.06.07 Reviewed by ......................... : Chris You Senior Engineer 2024.06.07 Approved by ......................... : 2024.06.07 Yang Fan, Manager[盖章] Report No.: 20240417G06070X -W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 3 of 21 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................... 4 1.1 EUT Description ......................................................................................................................... 4 1.2 Test Standards and Results ........................................................................................................ 5 1.3 Facilities and Accreditations ...................................................................................................... 6 1.3.1 Facilities .................................................................................................................................... 6 1.3.2 Test Environment Conditions .................................................................................................... 6 1.3.3 Measurement Uncertainty ......................................................................................................... 6 2. TEST CONDITIONS SETTING .............................................................................................. 7 2.1 Test Peripherals .......................................................................................................................... 7 2.2 Test Mode .................................................................................................................................... 7 2.3 Test Setup and Equipments List ................................................................................................ 8 2.3.1 Conducted Emission ................................................................................................................. 8 2.3.2 Radiated Emission ..................................................................................................................... 9 3. 47 CFR PART 15B REQUIREMENTS .................................................................................. 11 3.2 Radiated Emission .................................................................................................................... 14 3.2.1 Requirement ............................................................................................................................ 14 3.2.2 Test Description ...................................................................................................................... 15 3.2.3 Test Result ............................................................................................................................... 15 APPENDIX II：PHOTOGRAPHS OF EMC TEST CONFIGURATION ................................... 20 Change History Issue Date Reason for change 1.0 2024.06.07 First edition Report No.: 20240417G06070X -W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 4 of 21 1. GENERAL INFORMATION 1.1 EUT Description EUT Name .......................... .: AI Safety System Trade Name.....................: VIA Brand Name.....................: VIA Hardware Version................: RA Software Version .................. : v0.6.1 Note1: The EUT is a AI Safety System; Note2: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. Note3: The auxiliary sample of this product has a total of two sets of cameras, one model is M500 PD Right, M500 DMOD FRONT, M500 DMOD Rear, The other sets are the Forklift front camera, Forklift driver camera and Forklift rear camera, both of which have undergone EMC testing. Report No.: 20240417G06070X -W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 5 of 21 1.2 Test Standards and Results The objective of the report is to perform testing according to ICES-003 Issue 7: No. Identity Document Title 1 47 CFR Part 15 Subpart B Radio Frequency…

Text truncated - open the document above for the full version.

PAGE 1 OF 9 11.Application: This application shall apply for antenna unit which shall be used such as automotive, conventional communications, smart home, etc.. 2.Electrical Specification: Those specifications were specially defined for customer’s model, and all characteristics were measured under the model’s handset testing jig . 2-1. Frequency Band: Frequency Band MHz WIFI+GNSS WIFI: 2400-2500/5150-5850 GNSS: 1561/1575.42 2-2. Impedance 50 ohm nominal 2-3.Waterproof grade IP67 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Technology Co.,Ltd. SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF KINGRF TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY： XIN CHECKED BY: YS DESIGNED BY: De wen APPROVED BY: YS TITLE：KC.CW.00163 RF Cable SMA JACK TO IPEX SPEC REV. P0 PAGE 2 OF 9 2-4. VSWR WIFI antenna Frequency Band(MHz) 2400 2450 2500 5150 5850 Typical Value: 1.12 1.14 1.09 1.38 1.26 Measuring Method 1. A 50Ωcoaxial cable is connected to the antenna. Then this cable is connected to a network analyzer to measure the VSWR. 2. Keeping this jig away from metal at least 20 cm Picture UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Technology Co.,Ltd. SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF KINGRF TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY： XIN CHECKED BY: YS DESIGNED BY: De wen APPROVED BY: YS TITLE：KC.CW.00163 RF Cable SMA JACK TO IPEX SPEC REV. P0 PAGE 3 OF 9 2-4. VSWR GNSS LNA Characteristics Specification Frequency Range 1560MHz~1602MHz Gain 28±3 dB Noise Figure 2.0 dB typ Output V.S.W.R 2.0 max Operation Voltage 3.3~5 V Current 10~25 mA UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Technology Co.,Ltd. SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF KINGRF TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY： XIN CHECKED BY: YS DESIGNED BY: De wen APPROVED BY: YS TITLE：KC.CW.00163 RF Cable SMA JACK TO IPEX SPEC REV. P0 PAGE 4 OF 9 2-5. Efficiency and Gain 2-5.1 Measure method 1. Using a low loss coaxial cable to link a standard handset jig 2. Fixed this handset jig on chamber’s rotator plane 3. Linking jig into network analyzer port and using a probing horn antenna to collect data. 4. Using another standard gain horn antenna to calibrated those data 2-5.2 Chamber definition 1. An anechoic chamber (7mx4mx3m) which satisfied far-field condition was applied to avoid multi-path effect 2. The quite room region is 40cmx40cmx40cm at the center of rotator 3. The distance between DUT and standard antenna is 4.38 m 4. Probing antenna (9120D horn antenna) and standard gain horn antenna (BBHA9120 LPF 600MHz ~6GHz) UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Technology Co.,Ltd. SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF KINGRF TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY： XIN CHECKED BY: YS DESIGNED BY: De wen APPROVED BY: YS TITLE：KC.CW.00163 RF Cable SMA JACK TO IPEX SPEC REV. P0 4.38 m Rotatory controller Vector Network Aanlyzer Port 2Port 1 DUT Far-Field Chamber Std. Ant. PAGE 5 OF 9 WIFI antenna Freq Effi Effi Gain Freq Effi Effi Gain (MHz) (%) (dB) (dBi) (MHz) (%) (dB) (dBi) 2400 53.63 -2.71 2.08 5150 27.52 -5.6 0.46 2410 62.64 -2.03 2.78 5200 26 -6.18 0.57 2420 55.73 -2.54 2.47 5250 25.84 -6.41 0.27 2430 59.36 -2.26 2.75 5300 25.85 -5.87 0.58 2440 56.36 -2.49 2.32 5350 25.95 -5.86 0.36 2450 53.75 -2.7 2.37 5400 26.04 -5.84 0.34 2460 55.24 -2.58 2.96 5450 28.76 -5.41 0.86 2470 54.06 -2.67 2.61 5500 25.7 -5.9 0.11 2480 53.42 -2.72 3.01 5550 24.05 -6.19 0.03 2490 54.55 -2.63 2.98 5600 27.52 -5.47 0.44 2500 48.68 -3.13 2.09 5650 33.86 -4.7 1.42 5700 32.93 -4.82 1.16 5750 28.19 -5.59 0.67 5800 30.84 -5.11 0.93 5850 30.31 -5.18 0.89 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Technology Co.,Ltd. SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF KINGRF TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY： XIN CHECKED BY: YS DESIGNED BY: De wen APPROVED BY: YS TITLE：KC.CW.00163 RF Cable SMA JACK TO IPEX SPEC REV. P0 PAGE 6 OF 9 3. Mechanical Specification: 3-1. Mechanical Configuration (Unit: mm) The appearance of the antenna is according to drawing UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Technology Co.,Ltd. SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF KINGRF TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY： XIN CHECKED BY: YS DESIGNED BY: De wen APPROVED BY: YS TITLE：KC.CW.00163 RF Cable SMA JACK TO IPEX SPEC REV. P0 PAGE 7 OF 9 3-2. Connector appearance: SMA PLUG 3-3.Product Image： UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Technology Co.,Ltd. SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF KINGRF TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY： XIN CHECKED BY: YS DESIGNED BY: De wen APPROVED BY: YS TITLE：KC.CW.00163 RF Cable SMA JACK TO IPEX SPEC REV. P0 PAGE 8 OF 9 4 .Packaging specification： UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝± ANGLES＝± HOLEDIA＝± VLG ShenZhen VLG Wireless Te…

Text truncated - open the document above for the full version.