NCI-VNT6656GUV00802.11 b/g USB Dongle

VNT6656GUV00 USER'S MANUAL Revision 1.0 July 5, 2006 VIA TECHNOLOGIES, INC. Copyright Notice: Copyright © 2006, VIA Technologies, Incorporated. All Rights Reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of VIA Technologies, Incorporated. VNT6656GEV00 may only be used to identify WLAN products of VIA Technologies, Inc. is a registered trademark of VIA Technologies, Incorporated. All trademarks are the properties of their respective owners. Disclaimer Notice: No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies Inc. VIA Technologies Inc. makes no warranties, implied or otherwise, in regard to this document and to the products described in this document. The information provided by this document is believed to be accurate and reliable as of the publication date of this document. However, VIA Technologies Inc. assumes no responsibility for any errors in this document. Furthermore, VIA Technologies Inc. assumes no responsibility for the use or misuse of the information in this document and for any patent infringements that may arise from the use of this document. The information and product specifications within this document are subject to change at any time, without notice and without obligation to notify any person of such change. Offices: USA Office: Taipei Office: 940 Mission Court 8 th Floor, No. 533 Fremont, CA 94539 Chung-Cheng Road, Hsin-Tien USA Taipei, Taiwan ROC Tel: (510) 683-3300 Tel: (886-2) 2218-2078 Fax: (510) 683-3301 or (510) 687-4654 Fax: (886-2) 2219-8461 Web: www.vntek.com Web: www.vntek.com.tw VIA Technologies, Inc. Revision 1.0 • July 5, 2006 - iii - Revision History Revision History Release Date Revision Initials 1.0 2006-07-05 Initial release. SH VIA Technologies, Inc. Revision 1.0 • July 5, 2006 - iv - Table of Contents Table of Contents 1. Features ........................................................................................................................1 1.1. Drivers and Applications.......................................................................................... 1 1.2. Certifications ........................................................................................................... 1 1.3. Software Packages ................................................................................................. 1 1.4. Programming Guide ................................................................................................ 1 2. Drivers and Utilities ..................................................................................................... 2 2.1. Drivers ..................................................................................................................... 2 2.2. Utilities for end users............................................................................................... 2 2.3. Utilities for manufacturers........................................................................................ 2 3. Software Package Information ................................................................................... 3 3.1. Directory structure ................................................................................................... 3 3.2. Driver Keywords/Parameters .................................................................................. 4 4. Windows Utilities ......................................................................................................... 6 4.1. WiFiset .................................................................................................................... 6 4.1.1. Status ................................................................................................................... 6 4.1.2. Config................................................................................................................... 6 4.1.3. Site Survey......................................................................................................... 10 4.1.4. Statistics............................................................................................................. 11 4.1.5. Signal ................................................................................................................. 11 4.1.6. Profiles ............................................................................................................... 12 4.2. WPA Networking ................................................................................................... 16 Appendix A: Terminology ................................................................................................... 19 Appendix B: Important Notices .......................................................................................... 20 VIA Technologies, Inc. Revision 1.0 • July 5, 2006 - 1 - Features 1. Features 1.1. Drivers and Applications „ Drivers available for Microsoft Windows 98/ME/NT/2000/XP and all major distributions of Linux. „ Setup utility for automatic driver installation on Windows. „ Mass-production support tool. „ Mass-production application interface for custom programs. „ PATCH utility for driver customization. This utility allows the manufacturers to customize the driver packages, such as changing the drivers’ icons and file names. 1.2. Certifications „ "Designed for Microsoft Windows" Logo. „ Wi-Fi Certified. 1.3. Software Packages „ Software package for manufacturers: A complete set of drivers and utilities. „ Evaluation package (CD version) for manufacturers: Includes MPTOOL, Winsetup, and drivers for Windows only. „ Software package for end users: Includes all drivers and utilities, except MPTOOL and PATCH. 1.4. Programming Guide „ All drivers are available in the binary format. Source codes are not re…

Text truncated - open the document above for the full version.

No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Rev 2 D:\00tmp\06lr018 VNT6656GUV00\FCC\AP FORM.doc 02/08/02 Date: Aug. 29 th , 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: NCI-VNT6656GUV00 Model: VNT6656GUV00 We would like to have a FCC certification for NCI-VNT6656GUV00 (EUT). The EUT is a 802.11b/g USB Dongle. We have uploaded the following document for the EUT onto your website. 1. Form 731 2. Application & Authorization letter 3. Test Report 4. Block Diagram 5. Schematics 6. Manual 7. internal photo & external photo & setup photo Please review the information we submitted and issue us a grant for the subject model. If you have any comments, please do not hesitate to contact us. Thank you for your attention to these matters. Sincerely, ________________ Eddy Hsiung / Director International Standards Laboratory No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Rev 2 D:\00tmp\06lr018 VNT6656GUV00\FCC\AP FORM.doc 02/08/02 FCC Labeling Requirements and Information Date: Aug. 29 th , 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: NCI-VNT6656GUV00 Model: VNT6656GUV00 The following label information is required by the FCC Rules and Regulations for certified devices. Please find marketing information required by the FCC Rules and Regulations as following: Label Requirements An intentional radiator device subject to certification by the FCC shall carry a warning label which includes the following statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (Due to the space limitation, the statement is listed on page 24 of the users’ manual) The sample label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. FCC ID: NCI-VNT6656GUV00 Sincerely, ________________ Eddy Hsiung / Director International Standards Laboratory No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Rev 2 D:\00tmp\06lr018 VNT6656GUV00\FCC\AP FORM.doc 02/08/02 Request for Confidentiality Date: Aug. 29 th , 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: NCI-VNT6656GUV00 Model: VNT6656GUV00 In regards the exhibits submitted in support of the application for FCC ID: NCI-VNT6656GEV0X, please classify the following as confidential under the provision of 47 CFR 0.459. q Block Diagram q Schematics q Technical Spec The application contains technical information which the applicant deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ________________ Eddy Hsiung / Director International Standards Laboratory

International Standards Laboratory Report Number: ISL-06LR018P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -1- EUT-1.

1cm 3cm 802.11b/g USB Dongle Model: VNT6656GUV00 MAC ID: 000FA300001 FCC ID: NCI-VNT6656GUV00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| Made in Taiwan

International Standards Laboratory Report Number: ISL-06LR018P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -2- EUT-2. International Standards Laboratory Report Number: ISL-06LR018P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -3- EUT-3.

Report Number: 06LR018SAR-F Issue Date: 2006/08/10 HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 ISL-T10-R31-1 SAR Test Report of Product Name 802.11b/g USB Dongle Model VNT6656GUV00 Applied by: VIA Technologies, Inc. 8F,533,Chung-Cheng Road Hsin-Tien,Taipei 231 Taiwan, R. O. C. Test Performed by: International Standards Laboratory No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325 Taiwan, R.O.C. Tel:(03)407-1718 Fax:(03)407-1738 - i - International Standards Laboratory Report Number: 06LR018SAR-F HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 Contents of Report 1. General.................................................................................................................................1 1.1 Certification of Accuracy of Test Data........................................................................1 2. Description of Equipment Under Test (EUT)......................................................................2 2.1 Test Environment.........................................................................................................2 3. SAR Measurement System..................................................................................................3 3.1 ALSAS-10U System Description................................................................................3 3.1.1 Applications.........................................................................................................3 3.1.2 Area Scans............................................................................................................3 3.1.3 Zoom Scan (Cube Scan Averaging).....................................................................4 3.1.4 ALSAS-10U Interpolation and Extrapolation Uncertainty..................................4 3.2 Isotropic E-Field Probe................................................................................................4 3.2.1 Isotropic E-Field Probe Specification..................................................................6 3.3 Boundary Detection Unit and Probe Mounting Device...............................................6 3.4 Daq-Paq (Analog to Digital Electronics).....................................................................7 3.5 Axis Articulated Robot......................................................................................................7 3.6 ALSAS Universal Workstation....................................................................................8 3.7 Universal Device Positioner........................................................................................8 3.8 Phantom Types.............................................................................................................8 3.8.1 APREL Laboratories Universal Phantom............................................................9 4. Tissue Simulating Liquid...................................................................................................10 4.1 The composition of the tissue simulating liquid........................................................10 (% Weight)........................................................................................................................10 4.2 Tissue Calibration Result...........................................................................................10 4.3 Tissue Dielectric Parameters for Head and Body Phantoms.....................................11 5. SAR Measurement Procedure................................................................................................12 5.1 SAR System Validation.............................................................................................12 5.1.1 Validation Dipoles.............................................................................................12 5.1.2 Validation Result................................................................................................12 5.2 SAR Measurement Procedure....................................................................................13 6. SAR Exposure Limits............................................................................................................14 7. Test Equipment List...............................................................................................................15 8. Measurement Uncertainty......................................................................................................16 9. Test Result Summary.............................................................................................................17 9.1 802.11b Test Result..................................................................................................17 9.2 802.11g Test Result..................................................................................................17 10. SAR System Validation Data...............................................................................................18 10.1 2450 MHz System Validation Data...............................................................................18 11. 2450MHz SAR measurement Data......................................................................................21 11.1 802.11b...........................................................................................................................22 11.1.1 2412 MHz, EUT Position: Bottom........................................................................22 11.1.2 2437 MHz, EUT Position: Bottom........................................................................23 11.1.3 2462 MHz, EUT Position: Bottom........................................................................24 11.…

Text truncated - open the document above for the full version.

NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 3 Calibration Results Summary The following results relate the Calibrated Dipole and should be used as a quick reference for the user. Mechanical Dimensions Length: 51.5 mm Height: 30.4 mm Electrical Specification SWR: 1.01 U Return Loss: -45.3 dB Impedance: 50.6 Ω System Validation Results Frequency 1 Gram 10 Gram Peak 2450 MHz 53.09 24.44 101.85 NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 4 Introduction This Calibration Report has been produced in line with the SSI Dipole Calibration Procedure SSI-TP-018-ALSAS. The results contained within this report are for Validation Dipole 2450-220-00753. The calibration routine consisted of a three-step process. Step 1 was a mechanical verification of the dipole to ensure that it meets the mechanical specifications. Step 2 was an Electrical Calibration for the Validation Dipole, where the SWR, Impedance, and the Return loss were assessed. Step 3 involved a System Validation using the ALSAS-10U, along with APREL E-020 130 MHz to 26 GHz E-Field Probe Serial Number 212. References SSI-TP-018-ALSAS Dipole Calibration Procedure SSI-TP-016 Tissue Calibration Procedure IEEE 1528 “Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques” Conditions Dipole 2450-220-00753 was new taken from stock. Ambient Temperature of the Laboratory: 22 °C +/- 0.5°C Temperature of the Tissue: 20 °C +/- 0.5°C NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 5 Dipole Calibration Results Mechanical Verification APREL Length APREL Height Measured Length Measured Height 51.5 mm 30.4 mm 52.1 mm 31.0 mm Tissue Validation Head Tissue 2450 MHz Measured Dielectric constant, ε r 39.2 Conductivity, σ [S/m] 1.80 NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 6 Electrical Calibration Test Result S11 R/L -45.3 dB SWR 1.01 U Impedance 50.6 Ω The Following Graphs are the results as displayed on the Vector Network Analyzer. S11 Parameter Return Loss NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 7 SWR NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 8 Smith Chart Dipole Impedance NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 9 System Validation Results Using the Electrically Calibrated Dipole Head Tissue Frequency 1 Gram 10 Gram Peak Above Feed Point 2450 MHz 53.09 24.44 101.85 NCL Calibration Laboratories Division of APREL Laboratories. This page has been reviewed for content and attested to by signature within this document. 10 Test Equipment The test equipment used during Probe Calibration, manufacturer, model number and, current calibration status are listed and located on the main APREL server R:\NCL\Calibration Equipment\Instrument List May 2004

Report Number: ISL-06LR018FC Issue Date: 2006/08/29 HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 ISL-T10-R2-3 Test Report for FCC Part 15 Subpart B & C of Product Name 802.11b/g USB Dongle Model VNT6656GUV00 Applied by: VIA Technologies, Inc. 8F,533,Chung-Cheng Road Hsin-Tien,Taipei 23 Taiwan, R. O. C. Test Performed by: International Standards Laboratory No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325 Taiwan, R.O.C. Tel:(03)407-1718 Fax:(03)407-1738 FCC ID:NCI-VNT6656GUV00 International Standards Laboratory Report Number: 06LR018FC HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -i- Contents of Report 1. General...................................................................................................1 1.1 Certification of Accuracy of Test Data.............................................................................1 2. Test Results Summary............................................................................2 3. Description of Equipment Under Test (EUT)...........................................3 4. TEST RESULTS (802.11b)....................................................................4 4.1 Powerline Conducted Emissions [Section 15.207]...........................................................4 4.1.1 EUT Configuration.........................................................................................................................................4 4.1.2 Test Procedure................................................................................................................................................4 4.1.3 EMI Receiver/Spectrum Analyzer Configuration (for the frequencies tested).....................................4 4.1.4 Test Data:.........................................................................................................................................................5 4.2 Bandwidth for DSSS [Section 15.247 (a)(2)]..................................................................7 4.2.1 Test Procedure................................................................................................................................................7 4.2.2 Test Setup........................................................................................................................................................7 4.2.3 Test Data:.........................................................................................................................................................7 4.3 DSSS Maximum Peak Output Power [Section 15.247 (b)(1)].......................................10 4.3.1 Test Procedure..............................................................................................................................................10 4.3.2 Test Setup......................................................................................................................................................10 4.3.3 Test Data........................................................................................................................................................10 4.4 Radiated Emission Measurement [Section [15.247(c)(4)]..............................................11 4.4.1 EUT Configuration.......................................................................................................................................11 4.4.2 Test Procedure..............................................................................................................................................11 4.4.3 EMI Receiver/Spectrum Analyzer Configuration (for the frequencies tested)...................................11 4.4.4 Test Data (30MHz – 1GHz):.........................................................................................................................12 4.4.5 Test Data ( 1GHz – 25 GHz) ........................................................................................................................13 4.5 Band Edge Measurement..............................................................................................16 4.5.1 Test Procedure (Conducted).......................................................................................................................16 4.5.2 Test Setup (Conducted)..............................................................................................................................16 4.5.3 Test Data:.......................................................................................................................................................16 4.5.4 Test Procedure (Radiated)...........................................................................................................................18 4.5.5 Test Setup (Radiated)..................................................................................................................................18 4.5.6 Test Data........................................................................................................................................................19 4.6 RF Exposure Measurement [Section 15.247(b)(4) & 1.1307(b)]...................................22 4.7 DSSS Peak Power Spectral Density [Section 15.247(d) ].............................................23 4.7.1 Test Procedure..............................................................................................................................................23 4.7.2 Test Setup......................................................................................................................................................23 4.7.3 Test Data.....................................................…

Text truncated - open the document above for the full version.

-28- FCC ID:NCI-VNT6656GUV00 International Standards Laboratory Report Number: 06LR018FC HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B;CNLA:0997; IC:IC4164-1 Power Line Conducted Emissions (Neutral) Channel 1, 6, 11 Operator:JerryChiou Temperature(C):26 Humidity(%):56 Frequency LISNLoss CableLoss QPCorrct. QPLimit QPMargin AVECorrct. AVELimit AVEMargin MHz (dB) (dB) Amp.(dBuV) (dBuV) (dB) Amp.(dBuV) (dBuV) (dB) 0.38285 0.40 0.09 36.31 59.35 -23.04 26.99 49.35 -22.35 0.48891 0.40 0.07 35.06 56.32 -21.26 27.88 46.32 -18.44 0.5972 0.40 0.07 30.88 56.00 -25.12 27.10 46.00 -18.90 0.86261 0.40 0.07 31.11 56.00 -24.89 24.63 46.00 -21.37 0.97748 0.40 0.07 31.89 56.00 -24.11 27.18 46.00 -18.82 1.23746 0.50 0.07 29.15 56.00 -26.85 23.26 46.00 -22.74 3.76335 0.50 0.13 28.25 56.00 -27.75 21.98 46.00 -24.02 5.12448 0.50 0.15 23.53 60.00 -36.47 14.52 50.00 -35.48 18.0425 0.50 0.32 22.34 60.00 -37.66 19.63 50.00 -30.37 23.1263 0.44 0.33 17.59 60.00 -42.41 11.31 50.00 -38.69 * NOTE: During the test, the EMI receiver was set to Max. Hold then switch the EUT Channel between 1 , 6, 11 to get the maximum reading of all these channels. Margin = Amplitude + Insertion Loss- Limit A margin of -8dB means that the emission is 8dB below the limit CISPR22 Class B International Standards Laboratory Conduction 02 Neutral Class B Test Graph 100.0K1.0M10.0M100.0M Frequency ( Hz ) 0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 Amplitude ( dBuV ) Operator: Jerry Chiou Limit_QP Limit_AV NBand1_1 NBand2_1 PK Read QP Read AVG Read -29- FCC ID:NCI-VNT6656GUV00 International Standards Laboratory Report Number: 06LR018FC HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B;CNLA:0997; IC:IC4164-1 5.2 Bandwidth for DSSS [Section 15.247 (a)(2)] 5.2.1 Test Procedure The Transmitter output of EUT was connected to the spectrum analyzer. The 6 dB bandwidth of the fundamental frequency was measured. The setting of spectrum analyzer is as follows Equipment mode Spectrum analyzer Detector function Peak mode RBW 100KHz VBW 100KHz 5.2.2 Test Setup 5.2.3 Test Data: 6dB Bandwidth Temp. (deg. C): Test Engr: Humidity (%): Frequency 6dB Bandwidth Limit Chennel (MHz) (MHz) (MHz) Pass/Fail 1 2412 16.44 0.5 Pass 6 2437 16.44 0.5 Pass 11 2462 16.44 0.5 Pass EUT Spectrum Analyzer -30- FCC ID:NCI-VNT6656GUV00 International Standards Laboratory Report Number: 06LR018FC HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B;CNLA:0997; IC:IC4164-1 Channel 1: Channel 6: -31- FCC ID:NCI-VNT6656GUV00 International Standards Laboratory Report Number: 06LR018FC HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B;CNLA:0997; IC:IC4164-1 Channel 11: -32- FCC ID:NCI-VNT6656GUV00 International Standards Laboratory Report Number: 06LR018FC HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B;CNLA:0997; IC:IC4164-1 5.3 DSSS Maximum Peak Output Power [Section 15.247 (b)(1)] 5.3.1 Test Procedure The Transmitter output of EUT was connected to the peak power analyzer. 5.3.2 Test Setup 5.3.3 Test Data Maximum Peak Output Power Temp. (deg. C): Test Engr: Humidity (%): Channel Frequency (Mhz) Analyzer Reading (dBm) Cable Loss (dB) Peak Power Output (mW) Peak Power Output (dBm) Limit (dBm) Pass/Fail 1 2412 13.7…

Text truncated - open the document above for the full version.