
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
5 Ch. VHF Radio Repeater Equipment Document Number 50-189201HBK – Issue 1 Page 1 of 48 5 Ch. VHF Radio Repeater Equipment (Bi-directional Amplifier) For Day Wireless Systems AFL Works Order Q116073 AFL Product Part No. 50-189201 (5 Ch. VHF System 80dB) 5 Ch. VHF Radio Repeater Equipment Document Number 50-189201HBK – Issue 1 Page 2 of 48 Table of Contents 1.INTRODUCTION.......................................................................................................................... 4 1.1.Scope and Purpose of Document ............................................................................................. 4 1.2.Limitation of Liability Notice ...................................................................................................... 4 2.SAFETY CONSIDERATIONS ...................................................................................................... 5 2.1.Earthing of Equipment .............................................................................................................. 5 2.2.Electric Shock Hazard............................................................................................................... 5 2.3.RF Radiation Hazard ................................................................................................................ 5 2.4.Lifting and other Health and Safety Recommendations............................................................ 5 2.5.Chemical Hazard ...................................................................................................................... 6 2.6.Laser Safety.............................................................................................................................. 6 2.7.Emergency Contact Numbers...................................................................................................6 3.EQUIPMENT OVERVIEW............................................................................................................7 3.1.Overall System Diagram ........................................................................................................... 8 4.BDA VHF SYSTEM RACK 1 (50-189212) ................................................................................... 9 4.1.BDA VHF System Rack 1 (50-189212) System diagram........................................................ 10 4.2.BDA VHF System Rack 1 (50-189212) Photographs ............................................................. 11 4.3.BDA VHF Downlink Output Combiner (50-189208) ................................................................ 13 4.3.1.BDA VHF Downlink Output Combiner (50-189208) Major Components .......................... 13 4.3.2.BDA VHF Downlink Output Combiner (50-189208) System diagram .............................. 14 4.4.BDA VHF Uplink Input Splitter (50-189210)............................................................................ 15 4.4.1.BDA VHF Uplink Input Splitter (50-189210) Major Components...................................... 15 4.4.2.BDA VHF Uplink Input Splitter (50-189210) System diagram .......................................... 16 4.5.BDA VHF Channel Shelves (50-189202 to 50-189206) ......................................................... 17 4.5.1.BDA VHF Channel Shelves Major Components .............................................................. 17 4.5.2.BDA VHF Channel 1 Shelf (50-189202) System diagram................................................ 20 4.5.3.BDA VHF Channel 2 Shelf (50-189203) System diagram................................................ 21 4.5.4.BDA VHF Channel 3 Shelf (50-189204) System diagram................................................ 22 4.5.5.BDA VHF Channel 4 Shelf (50-189205) System diagram................................................ 23 4.5.6.BDA VHF Channel 5 Shelf (50-189206) System diagram................................................ 24 4.6. BDA VHF UPLINK OUTPUT COMBINER (50-189209)......................................................... 25 4.6.1.BDA VHF Uplink Output Combiner (50-189209) Major Components............................... 25 4.6.2.BDA VHF Uplink Output Combiner (50-189209) System Diagram .................................. 26 4.7.BDA VHF DOWNLINK INPUT SPLITTER (50-189207).......................................................... 27 4.7.1.BDA VHF Downlink Input Splitter (50-189207) Major Components ................................. 27 4.7.2.BDA VHF Downlink Input Splitter (50-189207) System Diagram ..................................... 28 4.8.24V PSU Shelf (50-146512) ...................................................................................................29 4.8.1.24V PSU Shelf (50-146512) Specification ....................................................................... 29 4.8.2.24V PSU Shelf (50-146512) Major Components ............................................................. 29 4.8.2.24V PSU Shelf (50-146512) System Diagram ................................................................. 31 5.BDA VHF SYSTEM RACK 2 (50-189213) ................................................................................. 32 5.1.BDA VHF System Rack 2 (50-189213) System Diagram ....................................................... 34 5.2.Hybrid Splitter/Combiner Tray (50-189211) ............................................................................ 35 5.2.1.Hybrid Splitter/Combiner Tray (50-189211) Major Components ...................................... 35 5.2.2.Hybrid Splitter/Combiner Tray (50-189211) System Diagram .......................................... 36 6.BDA VHF SYSTEM RACK 3 (50-189214) ................................................................................. 37 6.1.BDA VHF System Rack 3 (50-189214) System Diagram ....................................................... 39 7.INSTALLATION.......................................................................................................................... 40 7.1Initial Installation Record.........................…
Text truncated - open the document above for the full version.
Aerial Facilities Limited R F System Engineering. Aerial House, Radio Site Engineering. Asheridge Road, Tel: +44(0)1494 777000 Chesham, Buckinghamshire, Fax: +44(0)1494 777002 England, HP5 2QD 3 rd January, 2008 TRL Compliance Services Ltd Long Green Forthampton Gloucester GL19 4QH UK To Whom It May Concern: We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to these matters. Yours faithfully For and on behalf Aerial Facilities Limited Peter L Bradfield Senior Systems Engineer Registered Office: Aerial House, Asheridge Road, Chesham, Buckinghamshire, HP5 2QD England Registered No. 4042808 (England) www.aerialfacilities.com
BY DAT E DESCRIPT ION No THI RD ANGLE PROJECTI ON 1 2 34 5 6 7 8 9 A BCDE F 12345678 9 A BCD E F Fax : 01494 777002 Tel : 01494 777000 Aerial Facilities Limited THIS IS A PROPRIETARY DESIGN OF AERIAL FACILITIES LTD.REPRODUCT ION OR USE OF T HIS DESIGN BY OT HERS ISPERMISSIBLE ONLY IF EXPRESSLY AUTHORISED IN WRITINGBY AERIAL FACILITIES LTD. NO DECIMAL PLACE ± 1mmONE DECIMAL PLACE ± 0.3mmTWO DECIMAL PLACES ± 0.1mm ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE STATED CHKD DRAWN APPDDAT E TOLERANCES SCALE England CUST OMER DRAWING.No TITLE ISSUE 3A FCC IDENT. LABEL POSITION RACK MOUNTED UNIT 80-312190 1A 1:5 DBS 30/9/03 PRODUCTION ISSUE 30/ 9/ 02 DBS Li m i t ed Aerial Facilities POWERALARM FCC IDENT. LABEL
BDA VHF DOWNLINK OUTPUT COMBINER BDA VHF UPLINK INPUT SPLITTER BDA VHF UPLINK OUTPUT COMBINER BDA VHF DOWNLINK INPUT SPLITTER 24V PSU SHELF HYBRID SPLITTER/COMBINER TRAY BDA VHF SYSTEM 2 RACK BDA VHF SYSTEM RACK 3
5 Ch. VHF Radio Repeater Equipment Document Number 50-189201HBK – Issue 1 Page 7 of 48 3. EQUIPMENT OVERVIEW 5 channel radio repeater 50-189201 is supplied in three 43U equipment mounting racks. Rack 1 (50-189212) houses the main amplification modules along with the various splitters and combiners. Rack 2 (50-189213) houses the Cavity FIlters for the TX (Downlink) path Rack 3 (50-189214) houses the Cavity FIlters for the RX (Uplink) path Downlink. Channel 1 – 154.190MHz Channel 2 – 154.070MHz Channel 3 – 158.910MHz Channel 4 – 155.700MHz Channel 5 – 158.850 MHz The input splitter shelf (50-189207) receives Downlink VHF signals from the off-air RX antenna and the signal is split and passed through a series of bandpass and crystal filters. The resultant five signal paths then leave the shelf, each path going to the downlink section of a dedicated amplifier shelf (BDA VHF Channel Shelves 1 to 5, 50-189202/06); these amplifier shelves also contain channel selective modules to achieve the narrow bandwidth required. Upon leaving the Amplifier shelves the five signal paths enter BDA VHF Downlink Output Combiner (50-189208) where the five separate signal paths are combined into three. The three signal paths are then fed into the cavity combiner in Rack 2 where they are combined into a single signal path before being fed into BDA VHF DAS Hybrid Splitter/Combiner (50-189211) where the signal path is split into two feeds, one for each LCX feed Uplink Channel 1 – 156.195MHz Channel 2 – 155.325MHz Channel 3 – 154.785MHz Channel 4 – 154.830MHz Channel 5 – 156.150 MHz Uplink signals from the LCX are fed into BDA VHF DAS Hybrid Splitter/Combiner (50-189211) where they are combined into a single signal path and passed into the first stage of the cavity filter in Rack 3. In the first stage cavity filter the signal path is split into three and each path passes through a cavity filtering section and the three signal paths then are fed into the BDA VHF Uplink Input Splitter (50- 189210) in Rack 1, here the three paths are split into five and each path pases through a crystal filter which passes the channel required. Upon leaving the BDA VHF Uplink Input Splitter, each of the five signal paths is fed into the uplink section of a dedicated amplifier shelf (BDA VHF Channel Shelves 1 to 5, 50-189202/06); these amplifier shelves also contain channel selective modules to achieve the narrow bandwidth required. From the amplifier shelves the five signal paths are fed into the Uplink Output Combiner (50-189209) where the five signal paths are combined into three path before being fed into the second stage of the cavity filter in Rack 3. After passing through the cavity filters the separate signal paths are combined into a single path whis passes through a bandpass filter before being fed to the TX antenna
REPORT ON THE CERTIFICATION TESTING OF AN AERIAL FACILITIES LIMITED 5 CHANNEL VHF REPEATER WITH RESPECT TO THE FCC RULES CFR 47, PART 90 Subpart I PRIVATE LAND MOBILE REPEATER. TEST REPORT NO: RU1398/8310 COPY NO: 1 ISSUE NO: 1 FCC ID: NEO50-1892SERIES REPORT ON THE CERTIFICATION TESTING OF A AERIAL FACILITIES LIMITED 5 CHANNEL VHF REPEATER WITH RESPECT TO THE FCC RULES CFR 47, PART 90 Subpart I PRIVATE LAND MOBILE REPEATER. TEST DATE: 9 th – 14 th November 2007 TESTED BY: S HODGKINSON APPROVED BY: J CHARTERS RADIO SECTION LEADER DATE: 18 th February 2008 Distribution: Copy Nos: 1. Aerial Facilities Limited 2. TCB: TRL Compliance Limited 3. TRL Compliance Ltd THIS DOCUMENT MAY BE REPRODUCED ONLY IN ITS ENTIRETY AND WITHOUT CHANGE RU1398/8310 Page 3 of 60 CONTENTS PAGE CERTIFICATE OF CONFORMITY & COMPLIANCE 3 APPLICANT’S SUMMARY 4 EQUIPMENT TEST CONDITIONS 5 TESTS REQUIRED 5 TEST RESULTS 6-50 ANNEX PHOTOGRAPHS A PHOTOGRAPH No. 1: Test setup PHOTOGRAPH No. 2: Test setup APPLICANT’S SUBMISSION OF DOCUMENTATION LIST B EQUIPMENT CALIBRATION C MEASUREMENT UNCERTAINTY D Notes: 1. Component failure during test YES NO [ ] [X] 2. If Yes, details of failure: 3. The facilities used for the testing of the product contain in this report are FCC Listed. CERTIFICATE OF CONFORMITY & COMPLIANCE RU1398/8310 CERTIFICATE OF CONFORMITY & COMPLIANCE FCC IDENTITY: NEO50-1892SERIES PURPOSE OF TEST: Certification TEST SPECIFICATION: FCC RULES CFR 47, Part 90 Subpart I TEST RESULT: Compliant to Specification EQUIPMENT UNDER TEST: 5 Channel VHF Repeater EQUIPMENT TYPE: Private Land Mobile Repeater MAXIMUM GAIN: Uplink Downlink 83.7dB 98.72dB MAXIMUM INPUT: Uplink Downlink -56.10dBm -54.18dBm MAXIMUM OUTPUT CONDUCTED: Uplink Downlink 22.7dBm 27.17dBm ANTENNA TYPE: Uplink Downlink 10 dBi Yagi antenna CHANNEL SPACING: Not Applicable, Wideband FREQUENCY GENERATION: N/A MODULATION TYPE: F3E POWER SOURCE(s): 110Vac TEST DATE(s): 9 th – 14 th November 2007 ORDER No(s): 47390 APPLICANT: Aerial Facilities Limited ADDRESS: Aerial House Asheridge Road Chesham Buckinghamshire HP5 1TU TESTED BY: S HODGKINSON APPROVED BY: J CHARTERS RADIO SECTION LEADER RU1398/8310 Page 5 of 60 APPLICANT’S SUMMARY EQUIPMENT UNDER TEST (EUT): 5 Channel VHF Repeater EQUIPMENT TYPE: Private Land Mobile Repeater PURPOSE OF TEST: Certification TEST SPECIFICATION(s): FCC RULES CFR 47, Part 90 Subpart I TEST RESULT: COMPLIANT Yes No [X] [ ] APPLICANT’S CATEGORY: MANUFACTURER IMPORTER DISTRIBUTOR TEST HOUSE AGENT [X] [ ] [ ] [ ] [ ] APPLICANT’S ORDER No(s): 47390 APPLICANT’S CONTACT PERSON(s): Mr Peter Bradfield E-mail address: [email protected] APPLICANT: Aerial Facilities Limited ADDRESS: Aerial House Asheridge Road Chesham Buckinghamshire HP5 1TU United Kingdom TEL: +44 (0)1494 777000 FAX: +44 (0)1494 778456 MANUFACTURER: Aerial Facilities Limited EUT(s) COUNTRY OF ORIGIN: United Kingdom TEST LABORATORY: TRL Compliance Ltd UKAS ACCREDITATION No: 0728 TEST DATE(s): 9 th – 14 th November 2007 TEST REPORT No: RU1398/8310 RU1398/8310 Page 6 of 60 EQUIPMENT TEST / EXAMINATIONS REQUIRED 1. TEST/EXAMINATION RULE PART APPLICABILITY RESULT RF Power Output 90.205 Yes Complies Audio Frequency Response TIA EIA-603.3.2.6 N/A N/A Audio Low-Pass Filter Response TIA EIA-603.3.2.6 N/A N/A Modulation Limiting TIA EIA-603.3.2.6 N/A N/A Occupied Bandwidth 90.210 Yes Complies Spurious Emissions at Antenna Terminals 90.210 Yes Complies Field Strength of Spurious Emissions 90.210 Yes Complies Frequency Stability 90.213 N/A(note 1) N/A Transient behaviour 90.214 N/A(note 2) N/A Notes: 1 The EUT does not contain modulation circuitry, therefore the test was not performed. 2 The EUT is not a keyed carrier system, therefore the test was not performed. Uplink Class A [X] Class B [ ] 2. Product class: Downlink Class A [X] Class B [ ] 3. Product Use: Private Land Mobile Repeater 4. Emission Designator: F3E 5. Temperatures: Ambient (Tnom) 20 o C 6. Supply Voltages: Vnom 110Vac Note: Vnom voltages are as stated above unless otherwise shown on the test report page Single channel [ ] Two channel [ ] 7. Equipment Category: Multi-channel [X] 8. Channel spacing: Narrowband [ ] Wideband [X] 9. Test Location TRL Compliance Limited Up Holland [X] Long Green [ ] 10. Modifications made during test program No modifications were performed. System description: The 5 Channel VHF repeater employs an uplink and a downlink path. The uplink path operates over the frequency band 154.070 MHz –158.910MHz. The downlink path operates over the frequency band 154.785MHz –156.195MHz. RU1398/8310 Page 7 of 60 COMPLIANCE TESTS AMPLIFIER GAIN – CONDUCTED – PART 2.1046 – UPLINK Ambient temperature = 20 o C Radio Laboratory Relative humidity = 55% Supply voltage = 110Vac Channel number = See test results Frequency MHz Signal Generator input level dBm Input Cable Loss dB Output Cable & Attenuator loss dB Level at Spectrum Analyser dBm Gain dB Conducted Output Power dBm Gain after 10dB input level increase dB 154.785 -56.10 0.21 40.5 -17.80 79.01 22.70 69.21 155.325 -62.10 0.20 40.6 -19.20 83.70 21.40 73.92 156.195 -56.20 0.23 40.5 -19.87 77.05 20.63 67.22 Notes: 1. The signal generator input was increased by 10dBs and the level of the output signal remeasured. Frequency MHz EUT Gain dB Conducted Output Power dBm Antenna Gain dBi Radiated Output Power dBm 154.785 79.01 22.70 10 32.70 155.325 83.70 21.40 10 31.40 156.195 77.05 20.63 10 30.63 Notes: 1. The Antenna is a . TYPE OF EQUIPMENT MAKER/ SUPPLIER MODEL No SERIAL No TRL No ACTUAL EQUIPMENT USED SPECTRUM ANALYSER RHODE & SCHWARZ FSU 200034 281 X ATTENUATOR BIRD 8308-200-N N/A 103 X ATTENUATOR SPINNER 745357 D57224 225 X SIGNAL GENERATOR RHODE & SCHWARZ SML 03 102268 UH297 X Spectrum Analyser TRL281 EUT Signal Generator TRLUH340 Cable & Attenuator RU1398/8310 Page 8 of 60 A B C D 6dB 6dB 6dB Analyser TRL479 +110Vac AMPLIFIER INTERMODULATION SPURIOUS EMISSIONS – CONDUCTED – PART 2.1053– UPLINK Ambient temperature = 17 o C Radio Laboratory Relative humidity = 55…
Text truncated - open the document above for the full version.
RU1398/8310 Page 52 of 60 PHOTOGRAPH No. 1 TEST SETUP RU1398/8310 Page 53 of 60 PHOTOGRAPH No. 2 TEST SETUP
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 2 | 9 | 154.785 MHz - 156.195 MHz | 200.00 mW | F3E | Amp |

BSF3604
Equipment Class
B9B - Part 90 Class B Industrial Booster (non-SMR)
MBF-37D7-3708
Equipment Class
B2I - Part 20 Industrial Booster (CMRS)
Class B Booster
Equipment Class
B9B - Part 90 Class B Industrial Booster (non-SMR)
Class B Booster
Equipment Class
B9B - Part 90 Class B Industrial Booster (non-SMR)
Class A Booster
Equipment Class
B9A - Part 90 Class A Industrial Booster (non-SMR)