NEOA217SERIESTri-Band Repeater MBF-T-7-8-19

AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL MBF, Multi Band Repeater Product Description and User’s Manual THIS DOCUMENT IS VALID FOR SINGLE-BAND, DUAL-BAND AND TRI-BAND MBF REPEATERS SUPPORTING THE FOLLOWING FREQUECY BANDS: LTE 700, 850, 900, 1800, 1900, 2200 and AWS Single or dual band repeater Tri band repeater AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL II © Axell Wireless Ltd Copyright © 2011 Axell Wireless Ltd All rights reserved. No part of this document may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language without the prior written permission of Axell Wireless Ltd. The manufacturer has made every effort to ensure that the instructions contained in this document are adequate and free of errors and omissions. The manufacturer will, if necessary, explain issues which may not be covered by this document. The manufacturer's liability for any errors in the document is limited to the correction of errors and the aforementioned advisory services. This document has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using them. The manufacturer welcomes customer comments as part of the process of continual development and improvement of the documentation in the best way possible from the user's viewpoint. Please submit your comments to the nearest Axell Wireless sales representative. Contact Information Headquarters Axell Wireless Aerial House Asheridge Road Chesham Buckinghamshire HP5 2QD United Kingdom Tel: +44 1494 777000 Fax: +44 1494 777002 Commercial inquiries [email protected] Web site www.axellwireless.com Support issues [email protected] Technical Support Line, English speaking +44 1494 777 777 Contact information for Axell Wireless offices in other countries can be found on our web site, www.axellwireless.com AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL © Axell Wireless Ltd III About This Manual This Product Manual provides the following information: • Description of the Repeater unit • Procedures for setup, configuration and checking the proper operation of the unit • Maintenance and troubleshooting procedures For whom it is Intended This Product Manual is intended for experienced technicians and engineers. It is assumed that the customers installing, operating, and maintaining Axell Wireless Repeaters are familiar with the basic functionality of Repeaters. Notice Confidential - Authorized Customer Use This document may be used in its complete form only and is solely for the use of Axell Wireless employees and authorized Axell Wireless channels or customers. The material herein is proprietary to Axell Wireless. Any unauthorized reproduction, use or disclosure of any part thereof is strictly prohibited. All trademarks and registered trademarks are the property of their respective owners. Disclaimer of Liability Contents herein are current as of the date of publication. Axell Wireless reserves the right to change the contents without prior notice. The information furnished by Axell Wireless in this document is believed to be accurate and reliable. However, Axell Wireless assumes no responsibility for its use. In no event shall Axell Wireless be liable for any damage resulting from loss of data, loss of use, or loss of profits and Axell Wireless further disclaims any and all liability for indirect, incidental, special, consequential or other similes damages. This disclaimer of liability applies to all products, publications and services during and after the warranty period. Warrantee All antennas must be installed with Lightning protection. Damage to power modules, as a result of lightning are not covered by the warranty. Switching on AC or DC power prior to the connection of antenna cables is regarded as faulty installation procedure and therefore not covered by the Axell Wireless warranty. AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL IV © Axell Wireless Ltd Safety to Personnel Before installing or replacing any of the equipment, the entire manual should be read and understood. The user needs to supply the appropriate AC or DC power to the OMU System. Incorrect power settings can damage the OMU System and may cause injury to the user. Throughout this manual, there are "Caution" warnings. "Caution" calls attention to a procedure or practice, which, if ignored, may result in injury or damage to the system, system component or even the user. Do not perform any procedure preceded by a "Caution" until the described conditions are fully understood and met. CAUTION! This notice calls attention to a procedure or practice that, if ignored, may result in personal injury or in damage to the system or system component. Do not perform any procedure preceded by a "Caution" until described conditions are fully understood and met. Safety to Equipment When installing, replacing or using this product, observe all safety precautions during handling and operation. Failure to comply with the safety precautions and with specific precautions described elsewhere in this manual violates the safety standards of the design, manufacture, and intended use of this product. Axell Wireless assumes no liability for the customer's failure to comply with these precautions. This entire manual should be read and understood before operating or maintaining the OMU System. Class 3B Laser This product is equipped with class 3B lasers, as per definition in EN 60825-1. Caution!!! Un-terminated optical receptacles may emit laser radiation. Do not stare into beam or view with optical instruments. Optical transmitters in the opto-module can emit high energy invisible laser radiation. There is a risk for permanent damage to the eye. Always use protective cover on all cables and connectors which are not connected. Never look straight into a fibre cable o…

Text truncated - open the document above for the full version.

OPTICAL MASTER UNIT PRODUCT DESCRIPTION AND USER’S MANUAL Optical Master Unit Product Description and User’s Manual for Axell OMU Unit THIS DOCUMENT IS VALID FOR ALL OMU MODELS OMU is available in a range of models corresponding to repeater products AXELL OPTICAL MASTER UNIT PRODUCT DESCRIPTION AND USER’S MANUAL II © Axell Wireless Ltd Copyright © 2011 Axell Wireless Ltd All rights reserved. No part of this document may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language without the prior written permission of Axell Wireless Ltd. The manufacturer has made every effort to ensure that the instructions contained in this document are adequate and free of errors and omissions. The manufacturer will, if necessary, explain issues which may not be covered by this document. The manufacturer's liability for any errors in the document is limited to the correction of errors and the aforementioned advisory services. This document has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using them. The manufacturer welcomes customer comments as part of the process of continual development and improvement of the documentation in the best way possible from the user's viewpoint. Please submit your comments to the nearest Axell Wireless sales representative. Contact Information Headquarters Axell Wireless Aerial House Asheridge Road Chesham Buckinghamshire HP5 2QD United Kingdom Tel: +44 1494 777000 Fax: +44 1494 777002 Commercial inquiries [email protected] Web site www.axellwireless.com Support issues [email protected] Technical Support Line, English speaking +44 1494 777 777 Contact information for Axell Wireless offices in other countries can be found on our web site, www.axellwireless.com AXELL OPTICAL MASTER UNIT PRODUCT DESCRIPTION AND USER’S MANUAL © Axell Wireless Ltd III About This Manual This Product Manual provides the following information: • Description of the OMU Unit • Procedures for setup, configuration and checking the proper operation of the unit • Maintenance and troubleshooting procedures For whom it is Intended This Product Manual is intended for experienced technicians and engineers. It is assumed that the customers installing, operating, and maintaining Axell Wireless Repeaters are familiar with the basic functionality of Repeaters. Notice Confidential - Authorized Customer Use This document may be used in its complete form only and is solely for the use of Axell Wireless employees and authorized Axell Wireless channels or customers. The material herein is proprietary to Axell Wireless. Any unauthorized reproduction, use or disclosure of any part thereof is strictly prohibited. All trademarks and registered trademarks are the property of their respective owners. Disclaimer of Liability Contents herein are current as of the date of publication. Axell Wireless reserves the right to change the contents without prior notice. The information furnished by Axell Wireless in this document is believed to be accurate and reliable. However, Axell Wireless assumes no responsibility for its use. In no event shall Axell Wireless be liable for any damage resulting from loss of data, loss of use, or loss of profits and Axell Wireless further disclaims any and all liability for indirect, incidental, special, consequential or other similes damages. This disclaimer of liability applies to all products, publications and services during and after the warranty period. Warrantee All antennas must be installed with Lightning protection. Damage to power modules, as a result of lightning are not covered by the warranty. Switching on AC or DC power prior to the connection of antenna cables is regarded as faulty installation procedure and therefore not covered by the Axell Wireless warranty. AXELL OPTICAL MASTER UNIT PRODUCT DESCRIPTION AND USER’S MANUAL IV © Axell Wireless Ltd Safety to Personnel Before installing or replacing any of the equipment, the entire manual should be read and understood. The user needs to supply the appropriate AC or DC power to the OMU System. Incorrect power settings can damage the OMU System and may cause injury to the user. Throughout this manual, there are "Caution" warnings. "Caution" calls attention to a procedure or practice, which, if ignored, may result in injury or damage to the system, system component or even the user. Do not perform any procedure preceded by a "Caution" until the described conditions are fully understood and met. CAUTION! This notice calls attention to a procedure or practice that, if ignored, may result in personal injury or in damage to the system or system component. Do not perform any procedure preceded by a "Caution" until described conditions are fully understood and met. Safety to Equipment When installing, replacing or using this product, observe all safety precautions during handling and operation. Failure to comply with the safety precautions and with specific precautions described elsewhere in this manual violates the safety standards of the design, manufacture, and intended use of this product. Axell Wireless assumes no liability for the customer's failure to comply with these precautions. This entire manual should be read and understood before operating or maintaining the System. Class 3B Laser This product is equipped with Class 3B lasers, as per definition in EN 60825-1. Caution!!! Un-terminated optical receptacles may emit laser radiation. Do not stare into beam or view with optical instruments. Optical transmitters in the opto-module can emit high energy invisible laser radiation. There is a risk for permanent damage to the eye. Always use protective cover on all cables and connectors which are not connected. Never look straight into a fibre cable or a connector. Consider that a fibre can carry transmission in both directions. During handling of laser cables or connections ensu…

Text truncated - open the document above for the full version.

AXELL MBF MULI-BAND FIBER REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL © Axell Wireless Ltd 21 The correct interface level at the optical fibre converter is -5dBm/carrier in 900MHz and - 7dBm/carrier in both GSM1800 and UMTS bands. An attenuation of 48dB in 900MHz and 50dB in 1800/UMTS is therefore required between them. M B F - T - 9 - 1 8 - 2 2 O M U # 1 U F O M # 3 U F O M # 2 R B 2 2 0 0 B S B S U M T S R B 9 0 0 - 1 7 d B - 1 9 d B M C P A U M T S + 4 0 d B + 2 4 d B - 1 d B + 1 8 d B A t t e n = 1 A t t e n = 4 ( M a x G a i n = 2 5 d B ) + 4 0 d B M C P A G S M 9 0 0 - 1 . 5 d B - 1 7 d B - 1 d B - 1 d B - 1 7 d B - 3 0 d B - 3 0 d B U M T S : + 4 3 d B m G S M 9 0 0 : 2 x + 4 3 d B m 0 . . 1 0 d B o p t i c a l 2 x + 1 2 d B m ( I L = 1 6 d B ) ( I L = 1 4 d B ) ( M a x G a i n = 2 2 d B ) 2 x - 5 d B m 2 x - 4 d B m 2 x + 3 5 . 5 d B m 2 x + 3 4 d B m + 1 2 d B m - 7 d B m 0 d B m + 4 0 d B m + 3 9 d B m R B 1 8 0 0 M C P A 1 8 0 0 A t t e n = 5 + 4 0 d B + 2 0 d B - 1 . 5 d B 2 x + 3 5 . 5 d B m 2 x - 4 d B m - 1 9 d B - 1 d B ( I L = 1 6 d B ) - 1 7 d B G S M 1 8 0 0 : 2 x + 4 3 d B m 2 x - 7 d B m 2 x - 2 4 d B m 2 x - 2 4 d B m 2 x + 1 2 d B m U F O S A t t e n : 0 - 2 0 d B P D P i l o t L e v e l U F O S A t t e n = 3 D e t P w r U F O M # 1 L D P i l o t t o n e A N T U F O S A t t e n : 0 - 2 0 d B P D P i l o t L e v e l U F O S A t t e n : 0 - 2 0 d B P D P i l o t L e v e l 2 x - 2 2 d B m ( M a x G a i n = 2 5 d B ) - 2 4 d B m O M U # 2 U F O M # 3 U F O M # 2 0 . . 1 0 d B o p t i c a l U F O S A t t e n = 3 D e t P w r U F O M # 1 L D P i l o t t o n e O M U # 3 U F O M # 3 U F O M # 2 0 . . 1 0 d B o p t i c a l U F O S A t t e n = 3 D e t P w r U F O M # 1 L D P i l o t t o n e B S G S M 1 8 0 0 - 3 0 d B

Process Instruction NO: A2010-PI ISSUE: 1 PRINT THIS DOCUMENT IN COLOUR PAGE: 4 OF 14 Attach the internal case label to the left hand inside wall of the side of the case. Attach the port designation label to the front edge of the case adjacent to the connector ports. 030 Select the CBL PSU 924: J755014 & fit into case

AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL MBF, Multi Band Repeater Product Description and User’s Manual THIS DOCUMENT IS VALID FOR SINGLE-BAND, DUAL-BAND AND TRI-BAND MBF REPEATERS SUPPORTING THE FOLLOWING FREQUECY BANDS: LTE 700, 850, 900, 1800, 1900, 2200 and AWS Single or dual band repeater Tri band repeater AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL II © Axell Wireless Ltd Copyright © 2011 Axell Wireless Ltd All rights reserved. No part of this document may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language without the prior written permission of Axell Wireless Ltd. The manufacturer has made every effort to ensure that the instructions contained in this document are adequate and free of errors and omissions. The manufacturer will, if necessary, explain issues which may not be covered by this document. The manufacturer's liability for any errors in the document is limited to the correction of errors and the aforementioned advisory services. This document has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using them. The manufacturer welcomes customer comments as part of the process of continual development and improvement of the documentation in the best way possible from the user's viewpoint. Please submit your comments to the nearest Axell Wireless sales representative. Contact Information Headquarters Axell Wireless Aerial House Asheridge Road Chesham Buckinghamshire HP5 2QD United Kingdom Tel: +44 1494 777000 Fax: +44 1494 777002 Commercial inquiries [email protected] Web site www.axellwireless.com Support issues [email protected] Technical Support Line, English speaking +44 1494 777 777 Contact information for Axell Wireless offices in other countries can be found on our web site, www.axellwireless.com AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL © Axell Wireless Ltd III About This Manual This Product Manual provides the following information: • Description of the Repeater unit • Procedures for setup, configuration and checking the proper operation of the unit • Maintenance and troubleshooting procedures For whom it is Intended This Product Manual is intended for experienced technicians and engineers. It is assumed that the customers installing, operating, and maintaining Axell Wireless Repeaters are familiar with the basic functionality of Repeaters. Notice Confidential - Authorized Customer Use This document may be used in its complete form only and is solely for the use of Axell Wireless employees and authorized Axell Wireless channels or customers. The material herein is proprietary to Axell Wireless. Any unauthorized reproduction, use or disclosure of any part thereof is strictly prohibited. All trademarks and registered trademarks are the property of their respective owners. Disclaimer of Liability Contents herein are current as of the date of publication. Axell Wireless reserves the right to change the contents without prior notice. The information furnished by Axell Wireless in this document is believed to be accurate and reliable. However, Axell Wireless assumes no responsibility for its use. In no event shall Axell Wireless be liable for any damage resulting from loss of data, loss of use, or loss of profits and Axell Wireless further disclaims any and all liability for indirect, incidental, special, consequential or other similes damages. This disclaimer of liability applies to all products, publications and services during and after the warranty period. Warrantee All antennas must be installed with Lightning protection. Damage to power modules, as a result of lightning are not covered by the warranty. Switching on AC or DC power prior to the connection of antenna cables is regarded as faulty installation procedure and therefore not covered by the Axell Wireless warranty. AXELL MBF MULI-BAND FIBRE REPEATER PRODUCT DESCRIPTION AND USER’S MANUAL IV © Axell Wireless Ltd Safety to Personnel Before installing or replacing any of the equipment, the entire manual should be read and understood. The user needs to supply the appropriate AC or DC power to the OMU System. Incorrect power settings can damage the OMU System and may cause injury to the user. Throughout this manual, there are "Caution" warnings. "Caution" calls attention to a procedure or practice, which, if ignored, may result in injury or damage to the system, system component or even the user. Do not perform any procedure preceded by a "Caution" until the described conditions are fully understood and met. CAUTION! This notice calls attention to a procedure or practice that, if ignored, may result in personal injury or in damage to the system or system component. Do not perform any procedure preceded by a "Caution" until described conditions are fully understood and met. Safety to Equipment When installing, replacing or using this product, observe all safety precautions during handling and operation. Failure to comply with the safety precautions and with specific precautions described elsewhere in this manual violates the safety standards of the design, manufacture, and intended use of this product. Axell Wireless assumes no liability for the customer's failure to comply with these precautions. This entire manual should be read and understood before operating or maintaining the OMU System. Class 3B Laser This product is equipped with class 3B lasers, as per definition in EN 60825-1. Caution!!! Un-terminated optical receptacles may emit laser radiation. Do not stare into beam or view with optical instruments. Optical transmitters in the opto-module can emit high energy invisible laser radiation. There is a risk for permanent damage to the eye. Always use protective cover on all cables and connectors which are not connected. Never look straight into a fibre cable o…

Text truncated - open the document above for the full version.

Utan vårt uttryckliga tillstånd får denna handling icke utlämnas till obehöriga eller kopieras.Ej heller få r dess innehåll delgivas obehöriga eller utnyttjas.Al l upphovsrätt till handlingens innehåll förblir vår l iksom all rätt,om patent eller mönsterskydd erhålles.Överträdelse medför skadeståndsansvar. Copying of this document,and giving it to others an d the use or communication of the contents thereof,ar e forbidden whithout express authority.Offenders areliable to the payement of damages.All rights arereserved in the event of the grant of a patent or t he registration of a utility model or design. NOTE: Either U4A or U4Bto be mounted Minimum 6cm² Copper (1W) SP491 TCXO_VITE_VTC1 U4B VTXO210 U4A U12 D197030A C120R126 C128 C129 L37 C139 C282 D10 L59 R159 R162 C179 R163 C183 Q13 R171C186 C213C214 J3 C121 R129 Q8 T7 L40 C135 FL4 T8 L48R148 L52 C157 C155 C176 C174 R161 U14 C178 L61 C180 L63 R166 R173 C194 C193 C187 R183 L66 T11 L75 C198 C216 C237 J4 C101 Q6 T6 L35 R130R131C127 C126 C137 L41 C136 C149 C158 L51 C168 C170 R192 C240 C263 R21 R123 Q7 L33 C125 C119 L39 R138 R1 43 C14 2 C144 L43 L46 C148 R151 R149 C153 C152 Q11 R156 L58 L57 C165 C103 C109C106 FL3 R141 C1 46 C145 C151 L49 C150 L50 L55 L54 C156 T9 C163 C164 D9 C159 R34 C68 R66 U6 R55 L26 Q16 R82 R77 C86 C94 C92 C87 Q17 C111 C220 D17 R113 R168 Q20 R223C253C252 C268 C69 C75 C82 D4 D3 D2 R57 R67 R83 D6 L28 C102 C112 C104 U15 C107 R101 R169 R122 R109 R188 C235 U22 C266 C278 TP4 TP2 R20 U4 R62 R69 R68 R63 C219 R110 U20 R121 R222 R229 R228 U25 R6 R76C89 CON1 R119R117 R118 U23 R219 R5 TP11 U5 R80C90R79R78 TP16 D8 C255 C247 R221R220 R232 R227 D1 C71 L8 R59R58 TP6 R60 R85 TP15 TP14 C200 C98 C114 L70 R98 R99 Q19 R112 R186 C232 R217 R231 C251 C267 C279 L24 R9 R4 R30 R36 C79 C84 TP8 U3 C91 U7 C108 C116 C113 C221 R140 R187 R115 U21 R230 C256 Q15 R56 R65 R84 R81 R90 C9 L3 C4 L9 R26 T1 R28 L1 C1C2 C8 R15 R14R13 C18 C19 R18 R27 Q1 C33 R40 C35 R38 C36 C43 C45 C41 C47 C55 R216 R225 L2 L4 C10 L7 R25 T2 R32 R35 C32 R41 R39 R42 C39 C44 C42 C46 C51 C54 L16 C50 T4 L18 C58 C62 C6 3 L19 D14 L22 C19 0 L67 C207 L71 R208 T5 L81 R215 C241 L88 C262 J2 C5 R11R12 Q2 R24 R17 C20 C17 L15 R48 C52 C53 R54 C59 Q5 C61 L21 C189 L68 C208 R207 L74 L36 R133 C132 C133 C154 R160 R165 C195 C196 C281 C197 L31 R142 R136 R134 C118 C123 C177 C166 L62 R164 R184 C184 C202 C242 R135 C131 C172 R155 C185 L83 Q10 R147 R14 6 C160 C147 C162 TP1 L25 R86 R88 C99 L73 L79 R237 R189 R211 R238 R212 C228 R95 L80 C74 R75 C96 R102 R197 R242 R198 R241 C244 C259 C203 R104R103 C274 C270 C77 R74 R71 R49 TP12 C258 R202 R200 R234 C229 C260 R105 C201 D18 U18 P1 C67 TP9 C227 C226 R247 TP10 C64 C205 C206 TP5 R87 C65 C66 C97 U8 TP7 R236 R248 R195 R214 R106 R107 C245 C230 C217 C95 C11 U19 R96 R243R244 R245 T13 L86 R108 R93 FL1 R3 C27 C25 C28 L11 R37 C40 D15 D13 R203 C23 C26 L12 L17 R176 C60 C49 C56 C48 R47 R51 D16 L20 C188 L23 R204 L87 L82 C24 R16 R177 Q4 C284 R20 1 R18 1 C211 C210 L34 R128 C122 Q9 R132 L42 L38 C134 L53 R152 D11 C171 C169 C167 L60 C175 C182 T10 Q12 R167 L65 C192 R174 R182 R190 L72 L76 C209 L77 C212 D12 L78 R191 R205 L85 L29 L30 C105 C283 L32 R127 C72 R137 C138 D5 L44 C14 3 C218 R1 44 L47 R150 R153 R154 R157 R158 TP3 R10 U2 C12 U1 C78 C81 U10 L27 C88 R92 R89 C115 R100 C223 R120 R114 R111 C233 R224 C250 C249 C265 R249 C269 R250 C276 C280 Q14 R7 R19 R8 C70 C73 C83 C80 R61 R64 R52 U9 TP13 U11 C100 R91 D7 C222 Q18 C224 C231 R172 R193 R139 R116 R185 C236 R175 D19 R226 R218 C254 C248 C257 R246 C246 U24 C277 C275 R1 TR1 C7 C6 C3 C15 C16 R22 R23 C22 C21 TR2 R33 R31 R29 C34 C31 Q3 C38C37 R45 R44 R43 L13 R46 R50 C57 R178 R17 9 R206 FL2 C215 R209 C117 C140 C124 C130 L56 C173 L64 R170 C181 L84 R124 R125 R70 C110 C76 L45 R94 C141 R14 5 C161 C14 L69 R73 R72 U16 C199 R239 R240 R210R199 R235 R97 R233 C243 C264 C225 U17 T12 C272 C273 C93 C85 C13 C204 R196 R213 C238R194 C271 R2 C30 C29 T3 L14 R53 U13 R18 0 C234 C1 91 C261C239 axell J1317030B FD1 LED6 R74 C106 C94 L19 L33 LED5 U21 R92 LED4 C137 C165 LED3 R78 C138 C164 R32 C128 R76 R99 C112 C81 L16 C73 L15 C193 C146C127 L20 C105 R104 R105 C196 C159 L35 C149 C189 L60 C178 C6 C25 L59 C176 C13 C114 L36 C153 C7 C44 C161 L8 L9 R22 C8C9 C14C15 C3C4 L2 TP26 C36 C34 R30 U7 C41 C186 C39 R102 C103C150 L26 C28 L7 Q1 R1 C10 U17 C22 R17 R10R18 R19 R20 C24 C21 R3 R38 R29 C42R39 TP2 C35 L64 C199 C85R16C19 C207 R110R113 R116C135 L34 R200 R24 U34 C141 C143 L30 C144 U25 C211 U19 C116 R6 C17 U33 R62 D3 R54 D4 C190 L22L27 C90 C84 R88 R79 C86 R173 TP11 TP9 C29 R114 C122 R111R109 C202 C203 R80R87C89 TP14 L58 C32 R41 L24 C125 C200 TP15 C53R57 TP10 R56 C208 C206 L66 C171 R82 C101 R98 R89R90C93 R65 R72 C64 C113 L6 C204 L67 T4 R147C184 R85 R84 U14 C62 U16 C180 C182 L55 C192 T3 L54 R68 P2 R73 C74 C75 C109 U35 R107 U36 C136 U40 R91 U41 Q7 C129 C72 C82R77 Q6 L25 L5 TP24 R167 L4 C177 R4 R11 U2 U3 R8 C11 C76 R37 R33 C110 L21 C148 C5 R35 C68 C69 R40 C40 C20 R177 TP6 C209 C118 R144 R12 C16 R50 R49 U10 R143 R48 R64 R75 R132 C54 L29 R118 U11 U8 L62 R103 TP260 TP17 C87 R86 Q11 D5 D1 R27 U4 R169 R172 TP27 C172 C173 C108 C191 TP18 L57 R58R60 C175 T6 L37 C98 R100 R93 C197 C70 L28 R112 R301 C205 C56 D6 C92 L14 C194 L63 C63 C60 C179 R159 R67 P1 R97 C96 C100 C95 R152 R94 LED1 LED2 R31 T5 L3C77 R15 C1 C2 L1 C37 C154 L17 L31 C133 U28 C27 C131 U1 C79 C78 C26 R23 R7 R13 C47 C48 R52 C55 Q2 R45 TP3 R44 C38 Q3 R42 R43 C46 TP1 C50 L65 C198 U29 C132 L39 L61 C140 C115 R201 C212 C170 U20 R150 R174 R171 C52 R55 TP5 C71 TP12 TP7 TP21 R28 R166 R26 U5 L10 C31 C162 C151C104 C124 C123 C152 C185 R175 C155 C117 U27 R146R148 R145 C201 FD3 C145 R81 C134C139 C156 C195 L13 R69 C65 TP23 C66 R63 R70 C97 C188 FD2 R127 R128 C99 R95 C12 R14 C45 R106 C130 L32 R2 R21 R5 C23 C49 R51 R47 R130 TP8 TP4 R46 C51 C43 R36 R34 U6 U13 R122 R121 C83 R9 C210 R202 C18 R83 R170 C91 C80 U32 R153 TP16 D2 TP19 R53 U12 C33 C30 U18 C181 C174 R300 C111 C102 C187 L18 C147 L38 Q4 C57 L11 TP28 C61 C58 R142 C142 C59 L12 PD1 T2 U15 U23 FL1 FL2 U22 J1 or communicated to a third party, or used for any purpose withoutwritten permission.This document and i…

Text truncated - open the document above for the full version.

MCPA 2200 MCPA 850 RB 850 RB 2204 AWS Filter Combiner K835009A P1 P2 P3 P4 P5 P6 850 1800 AWS Straight connector Angled connector K835009A Title Articleno. Drawn by Sheet no Copyright Axell Wireless 2009 Annika Soderholm 1 Date 2009-02-12 RF Cabling MBF-T-8-17-19, one opto MBF-T-8-17-19, one opto MCPA 1900 RB 1900 K905004A K835004B K905004A K835001B K830503B K8350003A K845005A K905004A K835004B K835004B K 835008A K835001A K835004B K835003B K835008A K835009A 233 2 3 K832017B RF Distribution Module K835009A K835009A K835001A K835008A K835003B K835009A K905004A 4 K905004A Opto Module 22 19 8 22 19 8 K831012B J13 J4 J10 J3 J18 J6 J20 J1 J15 J2 J8 J11 J647030C J16 J7 J9 J17 J5 J12 Distribution Board NGR http://www.sgctech.co.kr SGC Technologies, Inc. Wireless and Internet Communication PRODUCT SPECIFICATION FOR INFORMATION CUSTOMER: AXELL WIRELESS PRODUCT NAME: Cavity Sixplexer (6 Ports 7 Pass Bands) PART NO : SGC-M6707/881/1960-60NS-KTA DIMENSION : 175 x 225 x 86 (W x L x H) unit: mm DRAWN BY : LEE KWAN SEOP APPROVAL BY : KIM BO HOON ISSUED DATE : 2010.07.29. http://www.sgctech.co.kr Specification: SGC-M6707/881/1960-60NS-KTA ITEM ITEMITEM ITEM 700 700700 700 850 850850 850 1900 19001900 1900 P1 P1P1 P1 P2 P2P2 P2 P3 P3P3 P3 P4 P4P4 P4 P5 P5P5 P5 P6 P6P6 P6 F.C F.CF.C F.C 742 .5 MHz 707& 78 1.5 MHz 836 .5 MHz 881 .5 MHz 188 0 MHz 196 0 MHz B.W B.WB.W B.W 29 MHz 18 &1 1 MHz 25M Hz 25M Hz 60 MHz 60 MHz ( 7 28 ~ 75 7 ) (69 8~7 16 ) (77 6~7 87 ) (82 4- 84 9) (86 9- 89 4) (18 50 ~ 1 910 ) (19 30 ~ 1 990 ) I.L I.LI.L I.L 1. 5 dB max 1. 5 dB max 1. 5 dB max Ripple RippleRipple Ripple 1.0 dB m ax 1.0 dB m ax 1.0 dB m ax Group Delay Group DelayGroup Delay Group Delay 150 ns ma x 150 ns ma x 150 ns ma x Return Loss Return LossReturn Loss Return Loss 18dB min . Attenuation AttenuationAttenuation Attenuation 60 min @ 0 – 6 98 MHz 60 min @ 0 – 6 50 MHz 60 min @ 0 – 7 16 MHz 60 min @ 0 – 6 98 MHz 80 min @ 0 – 1 70 0 MHz 80 min @ 0 – 1 85 0 MHz 80 min @ 698 – 7 16 MHz 80 min @ 728 – 7 57 MHz 80 min @ 728 – 7 57 MHz 80mi n @ 698 -7 87 MHz 20 min @ 170 0 – 18 30 MHz 95 min @ 185 0 – 19 10 MHz 7 mi n @ 716 - 72 3 MH z 10 min @ 793 – 8 24 MHz 50mi n @ 776 -7 87 MHz 89 min @ 824 – 8 49 MHz 89 min @ 193 0 – 19 90 MHz 7 mi n @ 191 0 – 19 25 MHz 7 mi n @ 761 -7 63 MHz 50mi n @ 824 -8 59 MHz 89 min @ 869 – 8 94 MHz 7 mi n @ 849 – 8 64 MHz 60 min @ 199 0 – 30 00 MHz 7 mi n @ 199 5 – 20 10 MHz 20 min @ 763 -7 76 MHz 80 min @ 869 – 8 94 MHz 70 min @ 894 – 2 70 0 MHz 7 mi n @ 899 – 9 14 MHz 40 min @ 201 0 – 60 00 MHz 80 min @ 776 – 8 59 MHz 70 min@ 894 – 2 700 MHz 30 min @ 914 – 9 50 MHz 70 min @ 869 – 2 70 0 MHz 60 min @ 950 – 1 850 MH z 90 min@ 185 0 – 19 10 MHz 60 min@ 191 0 – 27 00 MHz Impedance ImpedanceImpedance Impedance 50 O h m PIMD (min) PIMD (min)PIMD (min) PIMD (min) - 1 25 dBm @ 2*3 6dB m - 1 25 dBm @ 2*3 6dB m - 1 25 dBm @ 2*3 6dB m Input Power Input PowerInput Power Input Power Load :R.L> Load :R.L> Load :R.L> Load :R.L> 9dB 9dB9dB 9dB 40 dBm (AVG) 50 dBm (PEAK) 20 dBm (AVG) 30 dBm(PEAK ) 20 dBm(AV G) 30 dBm (PEAK) 40 dB (AVG ) 50 dBm (PEAK) 20 dBm(AV G) 30 dBm(PEAK ) 40 dBm(AV G) 50 dBm (PEAK) Temp Range Temp RangeTemp Range Temp Range -20 ~ +6 5 ( Op er atin g), -4 0 ~ + 70 (St o rag e) Humidity HumidityHumidity Humidity Relativ e H umi dity 5 – 95 % , Abs olut e Humi dity < 25 g/ m 3 Air pressure Air pressureAir pressure Air pressure 70 – 10 6 k pa Vibration Vibration Vibration Vibration And AndAnd And Shock ShockShock Shock Sinusoi dal vibr atio n Dis plac em en t 0 .3 mm , Acc eler atio n 1 m/s 2 Fr eq ue ncy 2 –20 0 Hz Shock Ty pe L , Ac cele rati on 40 m/s 2 Color ColorColor Color Ivory Connector ConnectorConnector Connector ANT : N -T yp e( Fe mal e), Oth ers : S MA ( Fe mal e) No CHKD DRAWN APPD DATE ISSUE TOLERANCES DESCRIPTIONDATEBY TWO DECIMAL PLACES : 0.1mm NO DECIMAL PLACE : 1mm Tel +44 (0)1494 777000 CUSTOMERDRG.No TITLE SCALE ONE DECIMAL PLACE : 0.…

Text truncated - open the document above for the full version.