NEOCCE-800N2800MHz Signal Enhancer

P B L Tunnels Loc 2 Units 1 & 2 + 800MHz BDA Maintenance Handbook H/book Number:-60-056100HBKM Issue No:-1 Date:-13/02/2003 Page:-1 of 1 Pasadena Blue Line Metro Radio System Maintenance Handbook For Canam Technology Inc. AFL Works Order No.: Q107519 Including AFL product part No’s.: 60-055900 UHF 1 & 2, Location ONE Air Interface 60-056000 Tunnels 1 & 2 Units 1 & 2 60-056100 UHF Units 1 & 2 & 800MHz BDA (This document) P B L Tunnels Loc 2 Units 1 & 2 + 800MHz BDA Maintenance Handbook H/book Number:-60-056100HBKM Issue No:-1 Date:-13/02/2003 Page:-2 of 2 Table of Contents AMENDMENT LIST RECORD SHEET...........................................................................................5 INTRODUCTION................................................................................................................................6 Scope................................................................................................................................................................6 Purpose.............................................................................................................................................................6 Glossary of Terms............................................................................................................................................7 AFL Drawing Symbol Keys.............................................................................................................................8 1. SAFETY CONSIDERATIONS.................................................................................................9 1.1 Electric Shock Hazard........................................................................................................................9 1.2 RF Radiation Hazard..........................................................................................................................9 1.3 Chemical Hazard...............................................................................................................................10 1.4 Emergency Contact Numbers...........................................................................................................10 2. OVERVIEW/SYSTEM DESCRIPTION................................................................................11 3. SPECIFICATIONS.................................................................................................................12 3.1 Parts Lists..........................................................................................................................................12 3.1.1 Location 2 Equipment Parts List......................................................................................................12 3.1.2 Unit 1 Fibre Fed Tunnel Amplifier 60-056101 Parts List.................................................................12 3.1.3 Unit 2 Fibre Fed Tunnel Amplifier 60-056102 Parts List.................................................................14 3.1.4 800MHz Bi-directional Air Interface Amplifier Parts List................................................................16 3.2 Technical Specifications....................................................................................................................18 3.2.1 UHF ONE to Tunnels 1 & 2 Technical Specification.......................................................................18 3.2.2 UHF ONE to Location TWO Technical Specification......................................................................19 3.2.3 UHF TWO to Tunnels 1 & 2 Technical Specification......................................................................20 3.2.4 UHF TWO to Location TWO Technical Specification......................................................................21 3.2.5 800MHz Bi-directional Amplifier to Location TWO Technical Specification...................................22 3.3 Mechanical Specification..................................................................................................................23 3.3.1 Unit 1, Unit 2, + 800MHz BDA.......................................................................................................23 4. SYSTEM DRAWINGS............................................................................................................24 4.1 Drg. No. 60-056190, Location 2 Unit 1 Case Outline Drawing........................................................24 4.2 Drg. No. 60-056192, Location 2 Unit 2 Case Outline Drawing........................................................25 4.3 Drg. No. 60-056192, 800MHz BDA Case Outline Drawing..............................................................26 4.3 Complete Pasadena Metro System Diagram....................................................................................27 5. SUB-UNIT MODULES...........................................................................................................29 5.1 Location 2, Unit 1 (60-056101)..........................................................................................................29 5.1.1 Bandpass Filters (02-007302, 02-013401)........................................................................................29 5.1.1.1 Description..............................................................................................................................29 5.1.1.2 Technical Specification (02-007302 & 02-013401)..................................................................29 5.1.2 ¼Watt 0- -30dB Switched Attenuator (10-000701)..........................................................................30 5.1.2.1 General Application.................................................................................................................30 5.1.2.2 Switched Attenuators...............................................................................................................30 5.1.3 Low Noise Amplifiers (11-006102, 11-007302 & 11-007402)......................................................…

Text truncated - open the document above for the full version.

dB dB 857-860MHz 812-815MHz 857.9375MHz 859.7625MHz 812.9375MHz 814.7625MHz 800MHz dB dB 857-860MHz 812-815MHz 12-000201 12-00020111-00670211-005902 11-00590211-006702 30dB30dB 30dB 30dB 20dB 20dB 14dB 14dB 14dB 14dB dB dB E O 470MHz 483MHz 473MHz 485-486MHz UNIT 1 UNIT 2 470MHz E O AGC AGC DET 473MHz dB dB 483MHz AGC AGC DET 485-486MHz H L 483-486MHz 470-475MHz VHF LCX 02-007306 02-007306 02-007306 02-007306 02-011204 02-011204 02-011204 02-011204 12-00180111-007302 11-007402 11-006102 11-007302 20dB 30dB 16dB20dB24dB 12-00420111-007302 11-00730211-006102 11-007302 20dB 30dB 16dB 20dB20dB 02-007306 02-007306 H L LCX 800MHz LOCATION TWO -15dBm -15dBm 18dBm 20dBm 28dBm 26dBm 18dBm 21dBm -60dBm 19dBm -60dBm -60dBm -15dBm -15dBm 25dBm -65dBm -17dBm -65dBm -62dBm -63dBm -65dBm 18dBm FIGUEROA TUNNEL 02-00720102-007201 02-00720102-007201

dB dB 857-860MHz 812-815MHz 857.9375MHz 859.7625MHz 812.9375MHz 814.7625MHz 800MHz dB dB 857-860MHz 812-815MHz 12-000201 12-00020111-00670211-005902 11-00590211-006702 30dB30dB 30dB 30dB 20dB 20dB 14dB 14dB 14dB 14dB dB dB E O 470MHz 483MHz 473MHz 485-486MHz UNIT 1 UNIT 2 470MHz E O AGC AGC DET 473MHz dB dB 483MHz AGC AGC DET 485-486MHz H L 483-486MHz 470-475MHz VHF LCX 02-007306 02-007306 02-007306 02-007306 02-011204 02-011204 02-011204 02-011204 12-00180111-007302 11-007402 11-006102 11-007302 20dB 30dB 16dB20dB24dB 12-00420111-007302 11-00730211-006102 11-007302 20dB 30dB 16dB 20dB20dB 02-007306 02-007306 H L LCX 800MHz LOCATION TWO -15dBm -15dBm 18dBm 20dBm 28dBm 26dBm 18dBm 21dBm -60dBm 19dBm -60dBm -60dBm -15dBm -15dBm 25dBm -65dBm -17dBm -65dBm -62dBm -63dBm -65dBm 18dBm FIGUEROA TUNNEL 02-00720102-007201 02-00720102-007201

To: Steve Behm From: Martin Perrine [email protected] FCC Equipment Authorization Branch Re: FCC ID: NEOCCE-800N2 Applicant: Aerial Facilities Limited Correspondence Reference Number: 8123 731 Confirmation Number: TC747981 Date of Original Email: 05/02/2003 Subject: Request for additional information FYI Per April Telecon with TCB CKC it is understood that this device is considered an extender. 1) Please revise exhibits to remove non related entries such as additional units in the block diagrams and schematics. Only this unit should be included. Please see uploaded Block Diagram. Schematics provided pertain to this device. 2) When connected together with other units the systems seems made up of 5 devices yet only 3 have grants. UHF 1, UHF 2, and 800 MHZ BPA have grants. However, UNIT 1 and UNIT 2 do not appear to have grants. UNIT 1 and UNIT 2 are needed in all operating configurations mentioned in the user manual and should have associated grants. Unit 1 and Unit 2 are used underground at the remote location. The downlink is into a confined space and not tested. The uplink signals injected at UHF 1 and UHF 2 are the maximum levels received from units 1 and 2. The UHF 1 and UHF 2 have ALC in the channel modules to keep the output power constant over a 30dB increase in input level. 3) Please update the Form 731 to include the "part of a system" selection/check box. An associated grant comment should be provided referring to the related components. This unit is not "part of a system", it is located in the same area as units 1 and 2 but is not connected to them. 4) Clear details should be given of how power will be limited to the levels measured since the device appears to have the capability of much higher powers. Related to this please provide clear details of power levels for the tests provided. Particularly for intermodulation measurements it is important that signals at the highest possible input level are tested. All uplink paths are fitted with channel modules to ensure only the wanted frequencies are amplified from the tunnel locations. Each channel module has it’s own ALC, which has been set to ensure the wanted power is available at the antenna port. The ALC function ensures that the output power cannot exceed that requested by the customer or tested by Nemkona. The size of the amplifiers fitted ensures a good margin of spare overhead between the IMs generated and the FCC limits of –13dBm. Note: products of this type have been tested to meet ETSI requirements of –36dBm. Also, please test intermodulation characteristics with at least 3 simultaneous signals as appropriate. Not possible for UHF 1, there are only 2 channel paths passing through the 473MHz path and 1 channel passing through the 485MHz path. There can never be 3 carriers in either of these paths. 5) Please update grant comment. RF exposure evaluation at time of licensing is not appropriate for this device. RF exposure must be accounted for at certification. ok 6) Please put gain of device on the grant comment. UHF 1 gain 39dB, (-19dBm input to +20dBm output). UHF 2 gain 37dB, (-19dBm input to +18dBm output). 7) Please detail if power measured is multiple channel or signal channel. RF Power is composite (Multi-Channel) 8) Additional RT correspondence may be required based on review of the response to the above. Agreed. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal pursuant to Section 2.917(c).

Label Location Internal Configuration

0086 Cell Enhancer 60-056103 BPA 800MHz Product ref : FCC ID.: NEOCCE-800N2 Aerial Facilities Limited The label is a silkscreened metal label attached wo the equipment with screw fasteners.

11-001202 (10/600 MHz LNA 24V Alarm board) 11-003905 (DC Alarm Side) 11-003905 (RF Side) 12-001806 (400 MHz 10W P 12-002201 (3 Way Alarm No Relay) 12-002408 (450 MHz 0.5 W LPA) 12-002801 (Single Alarm) 12-004901 (VHF 1 W PA) 12-005301 (VHF 10W PA) 13-001803 (DC/DC Converter Back) 13-001803 (DC/DC Converter Front) 13-002104 (PSU Alarm Board) 13-002104 (PSU Alarm) 13-002811 (Simplex Controller) 17-001201 (AGC Attenuator) 17-002802 (Simplex Rx/Squelch) 17-003006 (Channel Module Input Back Side) 17-003006 (Channel Module Outp ut Back Sid e ) 17-003006 (Channel Module Synth Side 20-001602 (24 V Relay Board Back) 20-001602 (24V Relay board Front)

Tune Up or Gain Adjustment Procedure This is the procedure to show how to adjust the gain for each channel from each individual module. The frequency and filter has been set and tuned from the manufacturer when it was built. Any frequency or bandwidth change will need to send back to the manufacturer to adjust it. There are two sets of 1 dB step of attenuator with total 30 dB range adjustment in the back of each channel module. The attenuator can adjust the output level for each individual channel module to choose a level to combine with other channels. The two sets of attenuator and each set have four identical switches, the first switch is indicated 1 dB, the second switch is indicated 2 dB, the third switch is indicated 4 dB and the fourth switch is indicated 8 dB. When the switch is toggled up, the attenuation will increase according to the indicated value. For example, the 1 dB switch is up and the attenuation is 1 dB so the output level will decrease 1 dB. When 1 dB and 2 dB switches both are up, the attenuation is 3 dB so the output level will decrease 3 dB. These four switches can make the combination from 1 dB to 15 dB. When combines all 8 switches together, it will get 1 dB to 30 dB ranges.

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:27.00(dBm) Maximum peak output power at antenna input terminal:501.1872336(mW) Antenna gain(typical):21(dBi) Maximum antenna gain:125.8925412(numeric) Prediction distance:200(cm) Prediction frequency:812(MHz) MPE limit for uncontrolled exposure at prediction frequency:0.533333333 (mW/cm^2) Power density at prediction frequency:0.125525(mW/cm^2) Margin of compliance:-6.3(dB) 2 4R PG S π = (mW/cm^2) (mW/cm^2)

Nemko Test Report: 2L0551RUS3 Applicant: Aerial Facilities Limited Equipment Under Test: BPA 800 MHz (E.U.T.) In Accordance With: FCC Part 90, Subpart I Private Land Mobile Repeater Tested By: Nemko Dallas Inc. 802 N. Kealy Lewisville, TX 75057-3136 Authorized By: Tom Tidwell, Wireless Group Manager Date: 12/11/02 Total Number of Pages: 27 Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 2 of 27 Table of Contents Section 1. Summary of Test Results.................................................................................................3 Section 2. General Equipment Specification......................................................................................5 Section 3. RF Power Output.............................................................................................................7 Section 4. Occupied Bandwidth........................................................................................................8 Section 5. Spurious Emissions at Antenna Terminals......................................................................11 Section 6. Field Strength of Spurious Emissions..............................................................................14 Section 7. Test Equipment List.......................................................................................................17 ANNEX A - TEST METHODOLOGIES.............................................................................................18 ANNEX B - TEST DIAGRAMS.........................................................................................................24 Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 3 of 27 Section 1. Summary of Test Results Manufacturer: Aerial Facilities Limited Model No.: BPA 800MHz Serial No.: 13402 G General: All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 90, Subpart I. New Submission Production Unit Class II Permissive Change Pre-Production Unit THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. None Nemko Dallas Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Dallas Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 4 of 27 Summary Of Test Data NAME OF TEST PARA. NO. SPEC. RESULT RF Power Output 90.205 Complies Audio Frequency Response TIA EIA-603.3.2.6 N/A N/A Audio Low-Pass Filter Response TIA EIA-603.3.2.6 N/A N/A Modulation Limiting TIA EIA-603.3.2.6 N/A N/A Occupied Bandwidth 90.210 Plots Complies Spurious Emissions at Antenna Terminals 90.210 Plots Complies Field Strength of Spurious Emissions 90.210 Complies Frequency Stability 90.213 N/A Transient Frequency Behavior 90.214 N/A N/A Footnotes For N/A’s: (1) Since the E.U.T. does not contain modulation circuitry modulation testing was not performed. (2) Since the E.U.T. is not a keyed carrier system, Transient Frequency Behavior was not performed. . Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 5 of 27 Section 2. General Equipment Specification Transmitter Supply Voltage Input: 115 Vac Frequency Range: 812.9375 MHz and 814.7625 MHz Tunable Bands: Single fixed channels Type(s) of Modulation: F3E (Voice) F1D F2D D7W (QAM) Other Gain: 50 dB min. Maximum Input: -19 dBm Output Impedance: 50 ohms RF Power Output: Single: 24 dBm (100 mW) Composite: 27 dBm (400 mW) Channel Spacing(s): 25 kHz Operator Selection of Operating Frequency: Fixed Power Output Adjustment Capability: Manual (Attenuators) Frequency Translation: F1-F1 F1-F2 N/A Band Selection: Software Duplexer Change Fullband Coverage Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 6 of 27 Theory of Operation The AFL Off air Amplifiers for the Pasadena Blue line project are 2 way on-band RF amplifiers. Their application is as an interface between the donor radio sites and the Fibre optic receivers and transmitters which will extend coverage to the locations via the fibre optic link. There are two units one designated for the ‘UHF1’ frequencies the other for the ‘UHF2’ frequencies. Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 7 of 27 Section 3. RF Power Output NAME OF TEST: RF Power Output PARA. NO.: 2.985 TESTED BY: David Light DATE:12/11/2002 Test Results: Complies. Measurement Data: Frequency (MHz) Measured Power (dBm) 812.9375 24 814.7625 24 Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 8 of 27 Section 4. Occupied Bandwidth NAME OF TEST: Occupied Bandwidth PARA. NO.: 2.989 TESTED BY: David Light DATE: 12/11/2002 Test Results: Complies. Test Data: See attached graph(s). Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: BPA 800 MHz PROJECT NO.: 2L0551RUS3 Page 9 of 27 Test Data – Occupied Bandwidth (Input/Output) Dallas Headquarters: 802 N. Kealy Lewisville, TX 75057 Tel: (972) 436-9600 Fax: (972) 436-2667 Nemko Dallas, Inc. Data Plot Page 1 of2 Complete X Job No.:2L0551R Date:12/11/2002Preliminary: Specification:PART 90Temperature(°C):20 Tested By:David LightRelative Humidity(…

Text truncated - open the document above for the full version.

Aerial Facilities Limited R F System Engineering. Aerial House, Radio Site Engineering. Asheridge Road, Tel: +44(0)1494 777000 Chesham, Buckinghamshire, Fax: +44(0)1494 777002 England, HP5 2QD Amplifier Information for FCC Approval Pasadena Blue Line Project Amplifier UHF 1 (473 / 485 MHz) Number of Carriers (473 MHz) 2 Number of Carriers (485 MHz) 1 Uplink Bandwidth (473 MHz) 500kHz Uplink Bandwidth (485 MHz) 500kHz Uplink Frequencies 473.2125, 473.2625, 485.2375MHz. Uplink Power Range +5dBm to +20dBm O/P Amplifier Current (473MHz) 1000mA O/P Amplifier Current (485MHz) 500mA O/P Amplifier Voltage 24v DC Amplifier UHF 2 (486 MHz) Number of Carriers 4 Uplink Bandwidth 1.4MHz Uplink Frequencies 486.0625, 486.2875, 486.3125, 486.5625MHz Uplink Power Range +3dBm to +18dBm Output Amplifier Current 1800mA O/P Amplifier Voltage 24v DC Amplifier 800MHz Number of Carriers 2 Uplink Bandwidth 5MHz Uplink Frequencies 812.9375, 814.7625MHz Uplink Power Range +3dBm to +18dBm Output Amplifier Current 1000mA O/P Amplifier Voltage 24v DC Graham Dawson Aerial Facilities Ltd. Ashridge Road, Chesham, Bucks. HP5 2QD. United Kingdom Registered Office: Aerial House, Asheridge Road, Chesham, Buckinghamshire, HP5 2QD England Registered No. 4042808 (England) www.aerialfacilities.com