NIT-SEGM520EDGE Modem

Users Manual SEGM-520 USB EDGE Modem Users Manual Copyright This USB EDGE Modem Installation Guide is copyright by Solomon Tech. Corp. with all rights reserved. No part of this document maybe reproduced in any form without the prior written approval of Solomon Tech. Corp. Disclaimer The information in this document is accurate at time of release. However, as Solomon Tech. Corp. is committed to continued research and development activities, these specifications may change from time to time. Contact your local representative should you require clarification on information contained in this document or to request of copy of the latest version of this document. 01 Users Manual Be aware of aviation safety Please do not use this device on the civilian airplanes, the aviation instruments on board maybe interfered by the RF power leads to failure. Be aware of your surroundings Please do not use this device when your are close to gas stations, fuels silos, chemical factories, or any explosive materials. Be aware of traffic safety Please do not use this device when you are driving a vehicle. Be aware of the RF power. Keep your body at least 2 inches (5 cm) away from the antenna when in use. Be aware of the medical device. The transmitted RF power might interfere some of the medical devices such as a heart pacer, please do not use this device in hospitals. 02 Users Manual Warnings The device is a delicate instrument, please handle with care, it is prohibited to fall on the ground or bent to avoid damage to the device. There are no parts to be maintained by the user, if the device seemed to be not functioning, please have it serviced by the qualified technician at the qualified service center. To avoid damage to the device, please do not take this device apart by yourself; the warranty is void once the seal is broken. Do not let children play with this device. When the device is not in use, please unplugged from the notebook PC and keep it at a cold dry place. Do not take the antenna off the device to avoid poor reception. Do not touch the antenna when in use to avoid poor reception. The device is not waterproof, please do not use it in rain or damp surroundings. 03 Users Manual Cautions when in use The device might suffer interference and cause poor reception when it close to a massive metal structure such as a metal furniture or inside of a steel structure of a building. To avoid RF interference, try not to use the device when it is close to a microwave oven or a TV. Please do not use the device when it has passed through dramatic temperature variations, the moisture inside the device may cause short circuits once powered on.Please wait until the moisture dries out before power on. The device is powered by the USB port from the computer, to avoid poor communication quality please do not power on the device when the computer is in low battery. It is always a nice tip to cut your large file into small packets for transmission. SAR related issues This device is not a cellular phone. However, please use it accordingly to the instructions. 04 Index 1. Introduction Package contents ..................................................................... 07 2. Installation & setting procedures System requirements ............................................................... 08 Software & hardware requirements ......................................... 08 Network system requirements ................................................. 08 SIM card installation ............................................................... 09 Insert the SIM card .................................................................. 09 Remove the SIM card .............................................................. 10 Install the EDGE modem to the PC ......................................... 11 Software installation ................................................................ 12 Install the EDGE modem driver software ................................ 13 Exit ............................................................................................18 05 Index Install EDGE modem ........................................................... 19 Setup EDGE modem ........................................................... 22 To use EDEG modem .......................................................... 26 SMS Management ........................................................... 28 Phonebook Management .................................................38 Setting ................................................................................ 42 About ......................................................................... 45 Q & A............................................................................. 46 FCC Information ..........................................50 06 Users Manual Package contents. Please check below items in the package, if there is any shortage or damage, please contact your local representative immediately. Installation CD SEGM-520 EDGE Modem Easy Installation Guide USB Extender Cord Items Quantity SEGM-520 EDGE Modem 1 USB Extender Cord 1 Installation CD 1 Easy Installation Guide 1 07 Users Manual System requirements Please make sure your computer's hardware and software meet the following requirements, please refer to your computer's users manual or contact your local representative for more information. Software & hardware requirements A valid SIM card (EDGE service is granted) An USB port or a PCMCIA to USB converter card is available. IBM compatible Pentium II 400 MHz (or above) notebook or PC with a minimum of 64 MB RAM Network system requirements Please make sure your local GSM network provides EDGE service and please apply the EDGE service from network. 08 SIM card installation Insert SIM card Insert SIM card into SIM card compartment with the chamfered corner to click into the housing. Chamfered corner Note: 1. Please make sure the chamfered corner on SIM card matches with the latch on the housing. 2. I…

Text truncated - open the document above for the full version.

SOLOMONTechnologyCorporation. No.42,SingZhongRd.,NeiHuDist.,Taipei,Taiwan,R.O.C. FederalCommunicationsCommission ~NIT-SEGMS20 DearSir: Thisis torequestconfidentialityoninformationsubmittedforaboveapplication.We wouldliketorequestconfidentialityonsomeexhibitswesubmittedforaboveoriginal applicationforthereasonoftradesecret.Ifthoseexhibitsareavailableforpublic inspection,anypersonwhooncegetstheinformationcontainedinthoseexhibitswill beabletodesignandtomakethesameproductsveryeasily.Thisisa veryserious problemandhugelossforus,becausewedidinvestsomuchonit.Pleasebenot madetheExhibitTypeslistedbelowroutinelyavailableforpublicinspection. ConfidentialityRequestregardingapplicationforcertificationof"'J;~ ~NIT-SEGMS20. PursuanttoSections0.457and0.459oftheCommission'sRules,weherebyrequest confidentialtreatmentofinfonnationaccompanyingthisapplicationasoutlined below: BlockDiagram,Schematic,OperationalDescription By: By: (Si Title .. jimmytsai (Printed) MarlcetingVP Applicant:SOLOMONTechnologyCorporation. Address No.42,SingZhongRd.,NeiHuDist.,Taipei,Taiwan,RO.C. Tel+886-2-8791-8989 Fax:+886-2-8791-9677 Date ------ --

Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. External Photos Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd.

FCC ID: NIT-SEGM520 Model No.: SEGM-520 FCC ID Label information: The label size is 2 cm X 2 cm and because of the size of this device is too small to be placed the other required statement, the following will be placed in the User Manual: This device complies with Part 22, 24 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Solomon Model:SEGM-520 S/N:( 11 numbers ) IMEI: ( 15 numbers ) FCC ID:NIT-SEGM520 Made in Taiwan

Test Report No：0701FS12-01 Page 2 of 46 ©2005 A Test Lab Techno Corp. Contents 1. Description of Equipment Under Test (EUT).......................................................................................... 3 2. Other Accessories..................................................................................................................................... 4 3. Introduction................................................................................................................................................ 5 4. SAR Definition........................................................................................................................................... 6 5. SAR Measurement Setup.......................................................................................................................... 7 6. System Components................................................................................................................................. 9 6.1 DASY4 E-Field Probe System........................................................................................................... 9 6.1.1 ET3DV6 E-Field Probe Specification....................................................................................... 10 6.1.2 ET3DV6 E-Field Probe Calibration.......................................................................................... 11 6.2 Data Acquisition Electronic (DAE) System......................................................................................... 11 6.3 Robot.................................................................................................................................................. 12 6.4 Measurement Server.......................................................................................................................... 12 6.5 Device Holder for Transmitters.......................................................................................................... 12 6.6 Phantom-TWIN SAM V4.0................................................................................................................. 13 6.7 Data Storage and Evaluation............................................................................................................. 13 6.7.1 Data Storage............................................................................................................................ 13 6.7.2 Data Evaluation........................................................................................................................ 14 7. Test Equipment List.................................................................................................................................. 16 8. Tissue Simulating Liquids........................................................................................................................ 17 8.1 Liquid Confirmation............................................................................................................................ 18 8.1.1 Parameters...............................................................................................................................18 8.1.2 Liquid Depth............................................................................................................................. 19 9. Measurement Process.............................................................................................................................. 20 9.1 Device and Test Conditions................................................................................................................ 20 9.2 System Performance Check.............................................................................................................. 21 9.2.1 Symmetric Dipoles for System Validation................................................................................ 21 9.2.2 Validation.................................................................................................................................. 22 9.3 Dosimetric Assessment Setup........................................................................................................... 22 9.3.1 Headset Test Position - Body Worn.......................................................................................... 22 9.3.2 Measurement Procedures........................................................................................................ 23 9.4 Spatial Peak SAR Evaluation............................................................................................................. 24 10. Measurement Uncertainty......................................................................................................................... 25 11. SAR Test Results Summary...................................................................................................................... 27 11.1 GSM 850MHz - Body SAR............................................................................................................. 27 11.2 PCS 1900MHz - Body SAR............................................................................................................ 28 11.3 Setup Photo.................................................................................................................................... 29 11.4 Std. C95.1-1999 Exposure Limit..................................................................................................... 30 12. Conclusion................................................................................................................................................. 31 13. References.................................................................................................................................................. 32 Appendix A - System Performance Check................................................................................................... 33 Appendix B - SAR Measurement Data........................................…

Text truncated - open the document above for the full version.

of Applicant: SOLOMON Technology Corporation. Address: No.42, Sing Zhong Rd., Nei Hu Dist., Taipei, Taiwan, R.O.C. Tested and Prepared by ETS DR. GENZ TAIWAN PS CO., LTD 6F, NO. 58, LANE 188, RUEY-KUANG RD., NEIHU TAIPEI 114, TAIWAN, R.O.C. TEL: 886-2-66068877 FAX: 886-2-66068879 E-mail: [email protected] FCC PART 22/24 TEST REPORT for EDGE Modem FCC ID: NIT-SEGM520 Model No.: SEGM-520 Report Number: W6M20612-7664-P-2224 FCC ID: NIT-SEGM520 Certification of Test Report Applicant : SOLOMON Technology Corporation Manufacturer : SOLOMON Technology Corporation Tested Equipment : Type Description : EDGE Modem Model Number : SEGM-520 Series Number : N/A Brand Name : N/A Operation Frequency : 824.2-848.8MHz / 1850.2 - 1909.8 MHz RF Output Power 1)824.2-848.8 MHz: 31.61 dBm 2)1850.2-1909.8 MHz: 28.16 dBm Power Supply : 5 VDC ( power on PC ) Regulation Applied : 47CFR Part 22 (2005-10) and Part 24 (2005-10) Test Method : 47CFR Part 2 (2005), TIA/EIA-603B (2002) and ANSI C63.4(2003) I HEREBY CERTIFY THAT: The test results written in this report were derived conscientiously in accordance with the requirements and procedures of 47CFR Part 2(2005) and TIA-603-B(2002), and it was found that the device described above is in compliance with the applicable limits specified in 47CFR Part 22 and Part 24. Note: 1. The result of this test report is valid only in connection to the sample has been tested at the laboratory of ETS Product Service (Taiwan). 2. This test report shall always be duplicated in full pages unless the written approval of the testing laboratory is obtained. Test Engineer: January 8, 2007 Jay Chaing Date ETS-Lab. Name Signature Technical responsibility for area of testing: January 8, 2007 Steven Chuang Date ETS Name Signature Report Number: W6M20612-7664-P-2224 FCC ID: NIT-SEGM520 ETS Dr. Genz Taiwan PS Co., Ltd. Page 1 of 29 TABLE OF CONTENTS CERTIFICATION OF TEST REPORT.......................................................................................2 1. SUMMARY .....................................................................................................................................3 1.1 DESCRIPTION OF TESTED EQUIPMENT.........................................................................................3 1.2 D ATE OF TESTING PROCESSING...................................................................................................3 1.3 MODIFICATION INFORMATION...................................................................................................3 1.4 T EST STANDARDS.......................................................................................................................3 1.5 SUMMARY OF TEST RESULT........................................................................................................4 2. GENERAL INFORMATION ........................................................................................................5 2.1 T ESTING LABORATORY..............................................................................................................5 2.1.1 Location ............................................................................................................................5 2.1.2 Details of accreditation status ..........................................................................................5 2.2 D ETAILS OF APPROVAL HOLDER.................................................................................................5 2.3 DESCRIPTION OF TESTED SYSTEM..............................................................................................6 2.4 TEST ENVIRONMENT...................................................................................................................7 2.5 GENERAL TEST REQUIREMENT..................................................................................................7 2.6 T EST EQUIPMENT LIST...............................................................................................................8 3. RF POWER OUTPUT....................................................................................................................9 3.1 TEST PROCEDURE.......................................................................................................................9 3.1.1 Conducted Method ............................................................................................................9 3.1.2 Radiated Method ...............................................................................................................9 3.2 TEST RESULTS.........................................................................................................................11 4. MODULATION CHARACTERISTICS ....................................................................................12 4.1 T EST PROCEDURE.....................................................................................................................12 4.2 TEST RESULTS.........................................................................................................................12 5. OCCUPIED BANDWIDTH.........................................................................................................13 5.1 TEST PROCEDURE.....................................................................................................................13 5.2 T EST RESULTS.........................................................................................................................13 6. SPURIOUS EMISSIONS AT ANTENNA TERMINALS.........................................................14 6.1 TEST PROCEDURE.....................................................................................................................14 6.2 TEST RESULTS.........................................................................................................................14 6.3 E XPLANATION OF TEST RESULT................................................................................................16 6.4 CALCUL…

Text truncated - open the document above for the full version.

Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. Setup Photos Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. RF Test Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. EMI Test ( Radiated Emission ) Registration number: W6M20612-7664 FCC ID: NIT-SEGM520 ETS. Dr.Genz Taiwan PS Co., Ltd. EMI Test ( AC Conducted )