NIYMWP177P6S2.4G Wireless mouse

2.4GHz Wireless Optical Mouse DC177-P6S & RX36_6S USER’S MANUAL Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, seek advice from a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: ƒ Take frequent breaks, get up and walk around several times every hour. ƒ Vary your tasks throughout the day. ƒ Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you do not have to reach. ƒ Adjust your chair and keyboard so your upper arms and wrists are straight. ƒ Avoid resting your wrists on sharp edges. System Requirements ƒ Mouse compatible with standard Microsoft OS ƒ If your computer’s operating system is Windows 98/ 98SE, please prepare the Windows98 or 98SE compact disk for system’s request during the installation. Before you begin ƒ Keep this manual for future reference! It contains Important Troubleshooting Information. ƒ Keep your old PS/2 or USB mouse as back-up devices. Getting Started Thank you for choosing the Wireless Optical Mouse. By using the advanced RF technology a 360° operation is possible and no line-of-sight is required between the receiver and the mouse. The mouse featured with 1,600 dpi high resolution will bring users the best operation accuracy and efficiency, For travel, loss prevention and more power saving, the DC177-P6S is designed to store receiver in the cavity underneath the mouse. You can use the power on/off switch to save the power. The low power indicator on top of the mouse will blink to indicate battery low power. With numerous user-friendly functions and the compact and ergonomic design, the RF mouse may offer users the best experience of utilization and convenience in traveling. DC177-P6S 2.4GHz Wireless Optical Mouse Page 1 of 7 1.0 Edition Package Contains Your DC177-P6S Mouse package includes the following: 1. The wireless optical mouse 2. USB RX36_6S receiver 3. User’s manual 4. 2 AAA alkaline batteries Note：If any part is missing, please contact your dealer for a replacement immediately. Precaution The optical mouse can not work on a glass or mirror surface. Avoid operating this mouse on a glossy surface; otherwise, this mouse may not operate normally. For conservation of battery power, it is strongly recommended to operate an optical mouse on a bright surface with fine texture to obtain lower power consumption of the high illumination LED. A very dark surface will cause higher power consumption. For optimal performance, mouse should be no more than 5M away from receiver. For a better transmission distance, avoid using this device on a metal plate or desktop because a large surface of iron, aluminum, copper and other metal will act as a shield or ground to the RF antenna of the mouse and receiver. Operating on a metal surface may shorten the transmission distance. If your notebook computer has a metal (contains Al or Mg) case, the metal housing of the LCD panel will isolate partial radiation of the RF signal from the mouse. This could possibly result in reducing the distance of transmission when you operate the mouse right in front of the notebook and when the receiver is connected on the back of the notebook. However, the RF mouse should work properly while you are operating the mouse just beside your desktop computer. DC177-P6S 2.4GHz Wireless Optical Mouse Page 2 of 7 1.0 Edition Overview Button #3 – Middle click Button & Scrolling wheel Button #1 – Left Click Button Button #2 – Right Click Button Low Power Indicator Button #5 – Internet Forwards Button #4 – Internet Backwards DC177-P6S 2.4GHz Wireless Optical Mouse Page 3 of 7 1.0 Edition Hardware Installation Guide (Mouse) Battery installation: 1. Remove the battery compartment cover. 2. Install batteries with the positive (+) & negative (-) in the correct direction indicated by the battery compartment label. 3. Clip the battery cover back into place and make sure it is firmly closed. (Caution: Do not look directly in to the optical emitter. Keep away from young children) Connect the RX36 -6S receiver with computer. Plug in the USB receiver to any available USB port or hub connected to your computer. (Windows will now detect the mouse and install the required drivers automatically). CLICK ANY BUTTON, YOUR MOUSE IS NOW READY TO BE USED Note: * During normal use, please make sure that the mouse is no more than 5M away from the receiver in order to have reliable connection. DC177-P6S 2.4GHz Wireless Optical Mouse Page 4 of 7 1.0 Edition Operation Guide LOW BATTERY POWER INDICATION When battery power becomes low, battery indicator LED on the top of the mouse will blink when moving or clicking the mouse. The mouse will continue to operate for a period of time depending on usage, but batteries should be replaced immediately. OPERATIONS ON POWER SAVING MODE In order to conserve battery power, the mouse is is also designed with the consideration of the trade-off between friendly usage and power consumption. Stages of power consumption include normal operation and idle. The idle mode is entered immediately upon stopping moving mouse. The optical sensor of the mouse will reduce current consumption gradually. In idle mode, moving the mouse can bore the mouse back to work. POWER ON/OFF: For the consideration of traveling purpose, this mouse designed a slide switch at the bottom of the mouse, which provides a power ON/ OFF function to avoid inadvertently waking up the mouse, thus saving more battery life. BATTERY REMOVAL: There is no need to re-do the binding process when battery is removed from and re-installed to the mouse. RECEIVER STORAGE For travelling purpose, the nano receiver can be stored inside the cavern on the bottom of the mouse. Storing RX36_6S receiver: To store in the mouse bottom, place USB plug end of receiver (A) then push the receiver into position (B). Receiver…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

FCC ID: NIYMWP177P6S Report No.: RF110512C25 Operational Description The transmitter of the EUT (2.4GHz Wireless Mouse) is powered from 3Vdc from batteries. The antenna is copper trace antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF110512C25 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110512C25 MODEL NO.: 4230700, MWP177_P6S FCC ID: NIYMWP177P6S RECEIVED: May 12, 2011 TESTED: May 18, 2011 ISSUED: May 27, 2011 APPLICANT: DEXIN Corporation ADDRESS: 14F-8,No 258,Lian Cheng Rd.,Chung Ho City,Taipei Hsien,Taiwan,R.O.C ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 24 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110512C25 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD..............................................................................3 1. CERTIFICATION..........................................................................................4 2. SUMMARY OF TEST RESULTS..................................................................5 2.1 MEASUREMENT UNCERTAINTY...............................................................5 3. GENERAL INFORMATION..........................................................................6 3.1 GENERAL DESCRIPTION OF EUT.............................................................6 3.2 DESCRIPTION OF TEST MODES...............................................................7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST..........................................7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:..............8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS..............................9 3.4 DESCRIPTION OF SUPPORT UNITS.........................................................9 4. TEST TYPES AND RESULTS....................................................................10 4.1 RADIATED EMISSION MEASUREMENT..................................................10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................10 4.1.2 TEST INSTRUMENTS...............................................................................11 4.1.3 TEST PROCEDURES................................................................................12 4.1.4 DEVIATION FROM TEST STANDARD......................................................12 4.1.5 TEST SETUP.............................................................................................13 4.1.6 EUT OPERATING CONDITIONS...............................................................13 4.1.7 TEST RESULTS.........................................................................................14 4.2 BAND EDGES MEASUREMENT...............................................................19 4.2.1 LIMITS OF BAND EDGES MEASUREMENT............................................19 4.2.2 TEST INSTRUMENTS...............................................................................19 4.2.3 TEST PROCEDURE..................................................................................19 4.2.4 DEVIATION FROM TEST STANDARD......................................................19 4.2.5 EUT OPERATING CONDITION.................................................................19 4.2.6 TEST RESULTS.........................................................................................19 5. PHOTOGRAPHS OF THE TEST CONFIGURATION.................................22 6. INFORMATION ON THE TESTING LABORATORIES...............................23 7. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.....................................................24 Report No.: RF110512C25 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF110512C25 Original release May 27, 2011 Report No.: RF110512C25 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: 2.4GHz Wireless Mouse BRAND NAME: Digital Innovations, Dexin MODEL NO.: 4230700, MWP177_P6S APPLICANT: DEXIN Corporation TESTED: May 18, 2011 TEST ITEM: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 ANSI C63.10-2009 The above equipment (Model No.: 4230700) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: ( Kay Chen / Supervisor ) APPROVED BY : , DATE: ( Ken Liu / Manager ) Report No.: RF110512C25 5 Report Format Version 4.0.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD SECTION TEST TYPE AND LIMIT RESULT REMARK 15.207 Conducted Emission Test N/A Power supply is 3Vdc from batteries 15.209 15.249 15.249 (d) Radiated Emission Test Band Edge Measurement Limit: 50dB less than the peak value of fundamental frequency or meet radiated emission limit in section 12.209 PASS Minimum passing margin is –10.2dB at 76.81MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Frequency Uncertainty 30MHz ~ 1GHz 3.87 dB Radiated emissions Above 1GHz 2.89 dB Report No.: RF110512C25 6 Report Format Version 4.0.0 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT 2.4GHz Wireless Mouse MODEL NO. 4230700, MWP177_P6S FCC ID NIYMWP177P6S POWER SUPPLY 3Vdc from batteries MODULATION…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST