NS3-615NPWireless Motion Detector Sensor

Wireless Motion Detector Sensor Model 615NP FEATURES ● Detect motion output wireless radio signal ● Swivel wall mount bracket kit ● Wireless RF transmission up to 50~70 meters (open space) INSTALLATION 1. Remove the screw from the battery compartment cover. 2. Install an alkaline 3 “AAA” alkaline battery. 3. Replace the battery cover and screw. 4. Mount the wireless motion detector sensor- Choose a suitable location, 5 - 6 feet (1.5 - 2.0 meters) away from floor, then use the swivel wall mount bracket template provided to mark location, drill holes and install anchors and fixture the bracket by screws, Place the main unit into the bracket and slide it down to secure in place. You can adjustable bracket obtain the best coverage of the intended protected area.(Fig 1) LEARNING CODE TO MAIN UNIT The motion detector sensor compatible 116S, 116X, T015S, T016S, T018S, T055S, T056S, T058S/VS, T068S, 639S, 526SL, 527SL, 528, 422R, 688R, 423R, 600R, 621S, 625R main unit, must learn code to main unit then use, learn code operation see main unit manual. HOW IT WORK After 60 seconds installed battery, the unit will into standby mode. Once the motion detected, the unit will output wireless radio trigger signal and LED flash. WALK TESTING MOTION DETECTOR SENSOR After select a location, you should test the sensor transmit range before mount it permanently. (The transmit range testing method see main unit manual) You can then test the sensor detection area. Temporarily place the detector at the mounting location and the chime sound will be heard from the main unit. If you walk beyond the sensor detection area, then there will not be a chime sound, by adjusting the sensor direction, or the installation location, you can get you desired detection area coverage. BATTERY LOW INDICATOR When battery goes low, the LED will light on 3 seconds and off 1 second, change new “AAA” alkaline battery immediately, or the sensor might not detection properly. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The wireless motion detector sensor compatible model with the following: 1.5~2M1.5~2M (Fig 1) Wireless Security Alarm /Auto Dialer System Model T018S ModelT056S Wireless Security/ Safety Alarm System With Auto Dialer BATT. LOW 1 4 7 / U P 2 5 8 0 3 6 9 PROG /DOWN PANIC AC Model T055S WirelessSecurity/ Safety Alarm System With Auto Dialer 1 4 7 / UP 2 5 8 0 3 6 9 PROG /DOWN BATT. LOW AC PANIC Model 116S Motion Detector Alarm System Model 116X Motion Detector Alarm For IP Camera BATT. LOW 1 4 7 / UP 2 5 8 0 3 6 9 PROG PAUSE ARM/ DISARM PANIC /DOWN Model T015S Wireless Security/Safety Alarm With Auto Dialer 1 4 7 */ UP 2 5 8 0 3 6 9 PROG PAUSE ARM/ DISARM PANIC /DOWN Auto Dialer With Motion Sensor & Alarm Model T016S Model 639S Visitor Chime And Watch Dog/Alarm Model 600R Wireless Receiver LINE 1 Model 625R Wireless Alert with 6 Sounds and Flash LED Model 423R Wireless Control Lampholder Model 621S Wireless Outdoor Siren With Flash Light 1 2 3 4 ARM/ DISARM SIZE:140X200MM P/N:610-615XX-000R ● 3 “AAA” batteries operation (not included) ● Battery low indicator LED ● Motion detection range up to 8 meters ● Motion detection angle up to 110 degree Model T058VS/T058S Wireless Securiy/ Safety Alarm System With Auto Dialer Model T068S GSM/PSTN Auto Dialer With Wireless Security/ Safety Alarm System Model 528 Built-in Alarm/Chime/ Mute/Flash Led Light Wireless Receiver MODE Model 527L/527F Wireless Outdoor Siren With Flash Light Model 526L/526F Wireless Outdoor Siren With Flash Light Model 422R Wireless Control AC Socket Model 688R Wireless Control AC Socket

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 LELUX ELECTRONICS LTD. Unit 6, 10/F, TCL Tower, No.8, Tai Chung Road, Tsuen Wan, New Territories, Hong Kong 2015-5-5 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, LELUX ELECTRONICS LTD. hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: NS3-615NP Model: 615NP, 615NR Product name: Wireless Motion Detector Sensor Sincerely, signature : name / title: Luke Lo / President address: Unit 6, 10/F, TCL Tower, No.8, Tai Chung Road, Tsuen Wan, New Territories, Hong Kong

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 LELUX ELECTRONICS LTD. Unit 6, 10/F, TCL Tower, No.8, Tai Chung Road, Tsuen Wan, New Territories, Hong Kong 2015-5-5 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: NS3-615NP We hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, signature : name / title: Luke Lo / President address: Unit 6, 10/F, TCL Tower, No.8, Tai Chung Road, Tsuen Wan, New Territories, Hong Kong

DECLARATION OF IDENTITY FCC ID: NS3-615NP Hereby we: LELUX ELECTRONICS LTD. (Name of Manufacturer) Basic Model Number: 615NP Basic Brand Name: Basic Product Name: Wireless Motion Detector Sensor Declare the Circuit, PCB Layout, shape of enclosure and Electrical Parts of the following product(s) are identical to the basic model: New / Additional Model Number(s): 615NR New / Additional Brand Name(s): / Except the following(s) : Model numbers，outlook color Signature with Company Chop : Printed Name : Luke Lo DATE: 2015-5-9

Label location

Antenna location

FCC ID: NS3-615NP Keyway Testing Technology Co., Ltd. Report No. 15KWE052531F Page 1 of 22 FCC TEST REPORT for Lelux Electronics Ltd. Wireless Motion Detector Sensor Model Number:615NP, 615NR FCC ID: NS3-615NP Prepared for : Lelux Electronics Ltd. Address : Unit 6, 10/F, TCL Tower, No.8, Tai Chung Road, Tsuen Wan, New Territories, Hong Kong Prepared by : Keyway Testing Technology Co., Ltd. Address : Baishun Industrial Zone, Zhangmutou Town, Dongguan, Guangdong, China Tel: 86-769-8718 2258 Fax: 86-769-8718 1058 Report No. : 15KWE052531F Date of Test : May 5~7, 2015 Date of Report : May 8, 2015 FCC ID: NS3-615NP Keyway Testing Technology Co., Ltd. Report No. 15KWE052531F Page 2 of 22 TABLE OF CONTENTS Test Report Declaration Page 1. GENERAL PRODUCT INFORMATION ............................................................................ 4 1.1. Product Function .................................................................................................................... 4 1.2. Description of Device (EUT) .................................................................................................. 4 1.3. Independent Operation Modes .............................................................................................. 4 2. TEST SITES ..................................................................................................................... 5 2.1. Test Facilities ......................................................................................................................... 5 2.2. List of Test and Measurement Instruments ............................................................................ 6 3. TEST SET-UP AND OPERATION MODES ...................................................................... 7 3.1. Principle of Configuration Selection ....................................................................................... 7 3.2. Block Diagram of Test Set-up ................................................................................................ 7 3.3. Test Operation Mode and Test Software ............................................................................... 7 3.4. Special Accessories and Auxiliary Equipment ....................................................................... 7 3.5. Countermeasures to Achieve EMC Compliance .................................................................... 7 3.6. Test Environment: .................................................................................................................. 7 4. EMISSION TEST RESULTS ............................................................................................. 8 4.1. Radiated Emission Test ......................................................................................................... 8 5. CALCULATION OF AVERAGE FACTOR ....................................................................... 15 6. 20DB OCCUPY BANDWIDTH ........................................................................................ 18 6.1. Limits .................................................................................................................................... 18 7. DWELL TIME .................................................................................................................. 19 7.1. Limits .................................................................................................................................... 19 8. PHOTOGRAPHS OF TEST SET-UP .............................................................................. 20 9. PHOTOGRAPHS OF THE EUT ...................................................................................... 21 FCC ID: NS3-615NP Keyway Testing Technology Co., Ltd. Report No. 15KWE052531F Page 3 of 22 Keyway Testing Technology Co., Ltd. Applicant: Address: Lelux Electronics Ltd.. Unit 6, 10/F, TCL Tower, No.8, Tai Chung Road, Tsuen Wan, New Territories, Hong Kong Manufacturer: Address: Lelux Electronics Ltd.. Unit 6, 10/F, TCL Tower, No.8, Tai Chung Road, Tsuen Wan, New Territories, Hong Kong E.U.T: Wireless Motion Detector Sensor Model Number: 615NP, 615NR Trade Name: Serial No.: ------ Date of Receipt: Apr. 26, 2015 Date of Test: May 5~7, 2015 Test Specification: FCC Part 15, Subpart C: Oct. 1, 2014 ANSI C63.10:2013 Test Result: The equipment under test was found to be compliance with the requirements of the standards applied. Issue Date: May 8, 2015 Tested by: Reviewed by: Approved by: Jack Bu / Engineer Andy Gao / Supervisor Jade Yang/ Supervisor Other Aspects: None. Abbreviations: OK/P=passed fail/F=failed n.a/N=not applicable E.U.T=equipment under tested This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Keyway Testing Technology Co., Ltd. FCC ID: NS3-615NP Keyway Testing Technology Co., Ltd. Report No. 15KWE052531F Page 4 of 22 1. GENERAL PRODUCT INFORMATION 1.1. Product Function Refer to Technical Construction Form and User Manual. 1.2. Description of Device (EUT) Description : Wireless Motion Detector Sensor M/N : 615NP, 615NR Power Supply : DC 4.5V Operation Frequency : 433.92MHz Modulation Technology : ASK Antenna Type : Integral Antenna Gain : 2dBi 1.3. Independent Operation Modes The basic operation modes are: 1.3.1. Transmitting mode(TX Mode) 1.3.2. Normal mode. 1.3.3. Transmitting mode(Low voltage Mode) Remark: For all test, used new battery. FCC ID: NS3-615NP Keyway Testing Technology Co., Ltd. Report No. 15KWE052531F Page 5 of 22 2. TEST SITES 2.1. Test Facilities Lab Qualifications : 944 Shielded Room built by ETS-Lindgren, USA Date of completion: March 28, 2011 966 Chamber built by ETS-Lindgren, USA Date of completion: March 28, 2011 Certificated by TUV Rheinland, Germany. Registration No.: UA 50207153 Date of registration: July 13, 2011 Certificated by UL, USA Registration No.: 100567-237 Date of registration: September 1, 2011 Certificated by Intertek Regis…

Text truncated - open the document above for the full version.

Radiated Emission