NZ3-WSWN683N2PWireless N USB Adapter 300Mbps

Wireless N USB Adapter 300Mbps WS-WN683N2P, U12-43870 Quick install guide Introduction Thank you for purchasing the Wireless-N USB Adapter,. Wireless-N USB 2.0 Adapter allows you to connect your laptop or desktop to any Wireless-N networks in your home or office. The Wireless-N (802.11n) USB 2.0 Adapter is great for those who want to upgrade older computers to be able to access the internet over a Wireless-N network. Package Contents • Wireless-N USB Adapter • Setup CD with user manual • Quick install guide System Requirements• Notebook or desktop PC with Pentium 1 GHz-compatible or higher processor • Windows 2000/XP/Vista/7, MAC OS, Linux • Available Hi-Speed USB 2.0 port Installation IMPORTANT: For proper operation, do not connect the Wireless-N USB Adapter to your computer before you install the software. If you do, wait for the Found New Hardware screen to display and click “Cancel”; otherwise, the installation process will likely be adversely affected. Insert the included setup CD in the CD-ROM Drive and start the Setup.exe program. To start the installation, please click on the “USB Wireless 802.11N Drivers” Wait for the installer to run Select Language and click “Next” to continue with the installation . The installer will automatically install the program. When done Select Yes, I want to restart my computer now and click Finish to reboot your computer. With the computer now turned on, insert the Wireless-N USB Adapter into an open USB 2.0 port. With the Welcome to the Found New Hardware Wizard screen displayed (which is automatic when the adapter is connected to the .computer), select the option “No, not this time” and click “Next.” When prompted with “What do you want the wizard to do?” select “Install the software automatically (Recommended)” and click “Next.” A status screen will display, indicating that the installation is in progress. No action is needed at this point. When the Completing the Found New Hardware Wizard screen displays, it indicates that the installation has been successfully completed and your Wireless-N USB Adapter is ready for configuration. Configuration Once the installation is complete, you can configure the Wireless-N USB Adapter to connect to a wireless access point (AP). The wireless configuration utility will start automatically, and you’ll also find a tray icon at the lower right in your Windows systems tray. 1. Right-click the Wireless tray icon and select “Open Config Utility.” 2. The configuration utility will scan for wireless networks within range. Click “Refresh” to refresh the list of available wireless networks. To join a particular network that displays, select it and click “Add to Profile.” 3. If the wireless network uses encryption, you need to input the correct encryption key. The configuration utility automatically suggests the correct authentication type (see the drop-down list), and you should not change the suggested value. NOTE: For WPA/WPA2 networks, you need to select the correct encryption type, as well (AES or TKIP). These settings depend on how the wireless network is set up. Only the owner of the wireless network can provide the required information. *** When you select the TKIP encryption mode, the speed would switch to 802.11g 54M following the TKIP protocol 4. If the wireless access point is successfully connected, you’ll see. NOTE: For advanced settings and additional features of the Wireless-N USB Adapter, refer to the user manual on the enclosed CD. FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The Maximum SAR value:0.531W/Kg SAR information RF exposure information (SAR) This device meets the EU requirements (1999/519/EC) on the limitation of exposureof the general public to electromagne tic fields by way of health protection. The limitsare part of extensive recommendations for the protection of the gene ral public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. To guarantee the safety of all persons, regardless of age and health, the limits include asignificant safety buffer. Before radio devices can be put in circulation, their agree ment with European laws or limits must be confirmed; only then may the CE symbol be applied. The unit of measurement for the European Council's recommen ded limit for mobile devices is the "Speci…

Text truncated - open the document above for the full version.

Report No.: C140808Z13-RP1 Page 1 / 2 External Photos of EUT Report No.: C140808Z13-RP1 Page 2 / 2

Label location

Report No.: C140808Z13-RP1 Page 1 / 2 Internal Photos of EUT Report No.: C140808Z13-RP1 Page 2 / 2 RF Module

FCC ID APPLI C PRODU BRAND MODEL CLIENT DATE O STAND REPOR A CAUTIO This rep laborato CAT I O N P UR UCT DESIGN D NAME L NAME T OF ISSUE DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Re : RPOSE : NAT I O N : : : : : : : tion of G ot be repro all not be qu R Te port No.:A NZ3-WS W Original E USB Wir e ULTRA WS-WN6 8 Winstars Sep. 19,2 0 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC0086 WN683N2P Equipment eless-N Adap 83N2P, U12- Technology 014 1528:2003 2.1093 SI C95.1 Complia ept in full w of context. Rep 6140801 ter -43870 Limited ance(Sh without the port FH01 henzhen e written pe t n) Co., L ermission o Page 1 o Ltd. of the test of 106 Report No.:AGC00866140801FH01 Page 2 of 106 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 19,2014 Valid Original Report The test plans were performed in accordance with IEEE Std. 1528:2003; 47CFR § 2.1093; IEEE/ANSI C95.1 and the following specific FCC Test Procedures: ·KDB 447498 D01 General RF Exposure Guidance v05r02 ·KDB 447498 D02 SAR Procedures for Dongle Xmtr v02 ·KDB 865664 D01 SAR measurement 100 MHz to 6 GHz v01r03 ·KDB 248227 D01 SAR meas for 802 11 a b g v01r02 App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturer N nufacturer A duct Design nd Name del Name erent Descri T Voltage plicable Stan t Date formed Loca port Templat e : ess : Name : Address : nation : : : iption : ndard : : ation te Tes Wins Block Shen Wins Block Shen USB ULTR WS-W All th DC3. IEEE 47CF IEEE Aug. Attes 2 F, B Stree AGC Teste Check e Authoriz st Rep tars Techno k 4, TaiSong nzhen, China tars Techno k 4, TaiSong nzhen, China Wireless-N RA WN683N2P, e same, exc 7V by batte E Std. 1528:2 FR § 2.1093 E/ANSI C95. 27,2014 station of Glo Building 2, N et, Bao'an D RT-US-3G3 d By ed By zed By port C ology Limited g Industrial P a ology Limited g Industrial P a Adapter U12-43870 cept for the ry 2003 1 obal Complia No.1-No.4, C istrict, Shen /SAR (2014 Eric Zh Angela Solger Z Certific d Park, DaLan d Park, DaLan 0 model name ance(Shenz Chaxi Sanwe nzhen, China 4-04-01) hou a Li hang Report cation g Street, Lo g Street, Lo e. The test m zhen) Co., L ei Technical a Sep. 19,201 Sep. 19,201 Sep. 19,201 t No.:AGC00 n ongHua Tow ongHua Tow model is WS td. Industrial Pa 4 4 4 0866140801 Page 3 o n, Bao'an D n, Bao'an D S-WN683N2 ark, Gushu, FH01 of 106 istrict istrict P. Xixiang Report No.:AGC00866140801FH01 Page 4 of 106 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT DESCRIPTION ...................................................................................................................................... 6 2.2. TEST PROCEDURE ...................................................................................................................................... 6 2.3. TEST ENVIRONMENT .................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 7 3.1. SPECIFIC ABSORPTION RAT E (SAR) ............................................................................................................. 7 3.2. SAR MEASUREMENT PROCEDURE ............................................................................................................... 8 3.3. DASY5 SYSTEM DESCRIPTION .................................................................................................................... 9 3.4. DASY5 E-FIELD PROBE ............................................................................................................................. 11 3.5. ISOTROPIC E-FIELD PROBE SPECIFICATION .................................................................................................. 11 3.6. ROBOT ...................................................................................................................................................... 11 3.7. LIGHT BEAM UNIT ..................................................................................................................................... 12 3.8. DEVICE HOLDER ....................................................................................................................................... 12 3.9. MEASUREMENT SERVER ............................................................................................................................ 12 3.10. SAM TWIN PHANTOM .............................................................................................................................. 13 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 14 4.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID ................................................................................... 14 4.2. TISSUE CALIBRATION RESULT ..................................................................................................................... 15 4.3. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS .............................................................. 16 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 17 5.1. SAR SYSTEM VALIDATION PROCEDURES .................................................................................................... 17 5.2. SAR SYSTEM VALIDATION .......................................................................................................................... 18 6. EUT TEST POSITION ............................…

Text truncated - open the document above for the full version.

Report No.:AGC00866140801FH01 Page 71 of 106 APPENDIX C. TEST SETUP PHOTOGRAPHS &EUT PHOTOGRAPHS Test Setup Photographs Horizontal –Back (5mm) Horizontal -Front 5mm Report No.:AGC00866140801FH01 Page 72 of 106 Vertical -front Vertical -back Report No.:AGC00866140801FH01 Page 73 of 106 Tip Report No.:AGC00866140801FH01 Page 74 of 106 DEPTH OF THE LIQUID IN THE PHANTOM—ZOOM IN Note：The position used in the measurement were according to IEEE 1528-2003 USB extension Metal shielding layer, and has good shielding performance. Report No.:AGC00866140801FH01 Page 75 of 106 EUT PHOTOGRAPHS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.:AGC00866140801FH01 Page 76 of 106 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.:AGC00866140801FH01 Page 77 of 106 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.:AGC00866140801FH01 Page 78 of 106 OPEN VIEW OF EUT-1 OPEN VIEW OF EUT-2 Report No.:AGC00866140801FH01 Page 79 of 106 OPEN VIEW OF EUT-3 INTERNAL VIEW OF EUT-1 Report No.:AGC00866140801FH01 Page 80 of 106 INTERNAL VIEW OF EUT-2

Report No.:AGC00866140801FH01 Page 81 of 106 APPENDIX D. PROBE CALIBRATION DATA Report No.:AGC00866140801FH01 Page 82 of 106 Report No.:AGC00866140801FH01 Page 83 of 106 Report No.:AGC00866140801FH01 Page 84 of 106 Report No.:AGC00866140801FH01 Page 85 of 106 Report No.:AGC00866140801FH01 Page 86 of 106 Report No.:AGC00866140801FH01 Page 87 of 106 Report No.:AGC00866140801FH01 Page 88 of 106 Report No.:AGC00866140801FH01 Page 89 of 106 Report No.:AGC00866140801FH01 Page 90 of 106 Report No.:AGC00866140801FH01 Page 91 of 106 Report No.:AGC00866140801FH01 Page 92 of 106 APPENDIX E. DAE CALIBRATION DATA Report No.:AGC00866140801FH01 Page 93 of 106 Report No.:AGC00866140801FH01 Page 94 of 106 Report No.:AGC00866140801FH01 Page 95 of 106 Report No.:AGC00866140801FH01 Page 96 of 106 Report No.:AGC00866140801FH01 Page 97 of 106 APPENDIX F. DIPOLE CALIBRATION DATA Report No.:AGC00866140801FH01 Page 98 of 106 Report No.:AGC00866140801FH01 Page 99 of 106 Report No.:AGC00866140801FH01 Page 100 of 106 Report No.:AGC00866140801FH01 Page 101 of 106 Report No.:AGC00866140801FH01 Page 102 of 106 Report No.:AGC00866140801FH01 Page 103 of 106 Report No.:AGC00866140801FH01 Page 104 of 106 Report No.:AGC00866140801FH01 Page 105 of 106 Report No.:AGC00866140801FH01 Page 106 of 106

Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 1 / 123 FCC 47 CFR PART 15 SUBPART C for Wireless N USB Adapter 300Mbps Model: WS-WN683N2P,U12-43870 Brand: ULTRA Test Report Number: C140808Z13-RP1 Issued Date: August 28, 2014 Issued for Winstars Technology Limited Block 4, TaiSong Industrial Park, Dalang Street, LongHua Town, Bao’ an district, Shenzhen, China Issued by: Compliance Certification Services (Shenzhen) Inc. No.10-1 Mingkeda Logistics park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen, China TEL: 86-755-28055000 FAX: 86-755-28055221 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NVLAP, NIST or any government agencies. The test results in the report only apply to the tested sample. 检 测 CNAS L4818 Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 2 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 August 28, 2014 Initial Issue ALL Nancy Fu Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 3 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1 TEST CERTIFICATION.................................................................................................. 4 2 TEST RESULT SUMMARY............................................................................................ 5 3 EUT DESCRIPTION ....................................................................................................... 6 4 TEST METHODOLOGY ................................................................................................. 7 4.1. DESCRIPTION OF TEST MODES ......................................................................................7 5 SETUP OF EQUIPMENT UNDER TEST........................................................................ 8 5.1. DESCRIPTION OF SUPPORT UNITS.................................................................................8 5.2. CONFIGURATION OF SYSTEM UNDER TEST .................................................................8 6 FACILITIES AND ACCREDITATIONS .......................................................................... 9 6.1. FACILITIES..........................................................................................................................9 6.2. ACCREDITATIONS .............................................................................................................9 6.3. MEASUREMENT UNCERTAINTY.......................................................................................9 7 FCC PART 15.247 REQUIREMENTS.......................................................................... 10 7.1. POWER LINE CONDUCTED EMISSIONS MEASUREMENT...........................................10 7.2. SPURIOUS EMISSIONS MEASUREMENT.......................................................................14 7.3. 6dB BANDWIDTH MEASUREMENT.................................................................................64 7.4. PEAK OUTPUT POWER ...................................................................................................79 7.5. BAND EDGES MEASUREMENT.......................................................................................83 7.6. PEAK POWER SPECTRAL DENSITY MEASUREMENT..................................................88 Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 4 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1 TEST CERTIFICATION Product Wireless N USB Adapter 300Mbps Model WS-WN683N2P,U12-43870 Brand ULTRA Tested August 8~ August 27, 2014 Applicant Winstars Technology Limited Block 4, TaiSong Industrial Park, Dalang Street, LongHua Town, Bao’an district, Shenzhen, China Manufacturer Winstars Technology Limited Block 4, TaiSong Industrial Park, Dalang Street, LongHua Town, Bao’an district, Shenzhen, China APPLICABLE STANDARDS StandardTest TypeStandardTest Type 15.207(a) Power Line Conducted Emissions 15.247(d) 15.209(a) � Spurious Emissions � Conducted Measurement � Radiated Emissions 15.247(a)(2) 6dB Bandwidth Measurement 15.247(b)(3) 15.247(b)(4) Peak Power Measurement 15.247(d) Band Edges Measurement 15.247(e) Peak Power Spectral Density We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by:Reviewed by: Sunday Hu Supervisor of EMC Dept. Compliance Certification Service Inc. Ruby Zhang Supervisor of Report Dept. Compliance Certification Service Inc. Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 5 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 2 TEST RESULT SUMMARY APPLICABLE STANDARDS StandardTest Type ResultRemark 15.247(a)(2) 6dB Bandwidth Measurement Pass Meet the requirement of limit. 15.247(b)(3) 15.247(b)(4) Peak Power Measurement Pass Meet the requirement of limit. 15.247(d) Band Edges Measurement Pass Meet the requirement of limit. 15.247(e) Peak Power Spectral Density Pass Meet the requirement of limit. 15.247(d) 15.209(a) � Spurious Emissions � Conducted Measurement � Radiated Emissio…

Text truncated - open the document above for the full version.

Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 81 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 7.4.5. TEST RESULTS No non-compliance noted Test Data Test mode: IEEE 802.11b (Antenna 1) Channel Frequency (MHz) Output Power (dBm) Output Power (W) Limit (W) Result Low241218.730.07464PASS Mid243718.540.07145PASS High246218.150.06531PASS 1 Test mode: IEEE 802.11b (Antenna 2) Channel Frequency (MHz) Output Power (dBm) Output Power (W) Limit (W) Result Low241218.580.07211PASS Mid243718.520.07112PASS High246218.720.07447PASS 1 Test mode: IEEE 802.11g (Antenna 1) Channel Frequency (MHz) Output Power (dBm) Output Power (W) Limit (W) Result Low241223.150.20654PASS Mid243723.260.21184PASS High246223.140.20606PASS 1 Test mode: IEEE 802.11g (Antenna 2) Channel Frequency (MHz) Output Power (dBm) Output Power (W) Limit (W) Result Low241224.030.25293PASS Mid243724.070.25527PASS High246223.980.25003PASS 1 Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 82 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Test mode: IEEE 802.11n HT20 MHz (Combine with Antenna 1 and Antenna 2) Test mode: IEEE 802.11n HT40 MHz (Combine with Antenna 1 and Antenna 2) Note : Combine Power Calculation : Total Power(dBm) =log (10 (chain 0 power/10) +10 (chain 1 power/10) )*10 Channel Frequency (MHz) Output Power (dBm) Output Power Limit (W) Result Chain 0Chain 1Total Low242221.4321.5824.520.28288PASS Mid243721.2721.7824.540.28463PASS High245221.7222.1224.930.31152PASS 1 Channel Frequency (MHz) Output Power (dBm) Output Power (W) Limit (W) Result Chain 0Chain 1Total Low242222.0923.1225.650.36692PASS Mid243722.0323.0425.570.36096PASS High245222.4322.9325.700.37132PASS 1 Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 83 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 7.5. BAND EDGES MEASUREMENT 7.5.1. LIMITS According to §15.247(d), in any 100 kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see Section 15.205(c)). 7.5.2. TEST INSTRUMENTS Radiated Emission Test Site 966(2) Name of EquipmentManufacturer Model Number Serial Number Last Calibration Due Calibration PSA Series Spectrum Analyzer Agilent E4446A US4430039903/01/2014 03/01/2015 EMI TEST RECEIVER ROHDE&SCHWARZESCI 100783 03/09/2014 03/08/2015 Amplifier MITEQ AM-1604-30001123808 03/18/201503/18/2015 High Noise Amplifier Agilent 8449B 3008A0183803/18/201503/18/2015 Board-Band Horn Antenna SchwarzbeckBBHA 9170 9170-497 07/10/201407/09/2015 Bilog AntennaSCHAFFNERCBL6143 5082 03/01/201403/01/2015 Horn AntennaSCHWARZBECK BBHA9120 D28603/01/201403/01/2015 Loop Antenna A、R、A PLA-1030/B 1029 09/27/201309/26/2014 Turn Table N/A N/A N/A N.C.R N.C.R Controller Sunol SciencesSC104V 022310-1 N.C.R N.C.R Controller CTN/A N/A N.C.R N.C.R Temp. / Humidity Meter Anymetre JR913 N/A 02/28/201402/28/2015 Antenna TowerSUNOL TLT2 N/A N.C.R N.C.R Test S/W FARAD LZ-RF / CCS-SZ-3A2 NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The FCC Site Registration number is 101879. 3. N.C.R = No Calibration Required. Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 84 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 7.5.3. TEST PROCEDURES (please refer to measurement standard) 1. The EUT is placed on a turntable, which is 0.8m above the ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emission. 4. Set the spectrum analyzer in the following setting in order to capture the lower and upper band-edges of the emission: (a) PEAK: RBW=VBW=1MHz / Sweep=AUTO (b) AVERAGE: RBW=1MHz / VBW=10Hz / Sweep=AUTO 5. Repeat the procedures until all the PEAK and AVERAGE versus POLARIZATION are 7.5.4. TEST SETUP 1m 30cm Spectrum analyzer Horn antenna 3m 4m Turntable EUT 0.8m Antenna tower Pre-amp Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 85 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 7.5.5. TEST RESULTS Test Plot IEEE 802.11b mode (Antenna 1) Band Edges (CH Low) Detector mode: Peak Polarity: Vertical Detector mode: Average Polarity: Vertical No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 12390.000045.36-6.6051.9674.00-22.04PeakVertical 22390.000032.97-6.6039.5754.00-14.43AverageVertical Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 86 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Detector mode: Peak Polarity: Horizontal Detector mode: Average Polarity: Horizontal No. Frequency (MHz) Reading (dBuV) Corrected (dB) Result (dBuV) Limit (dBuV) Margin (dB) Detector Antenna Pole 12390.000046.56-6.6053.1674.00-20.84PeakHorizontal 22390.000034.15-6.6040.7554.00-13.25AverageHorizontal Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 87 / 123 This report shall not be reproduced except in full, without the written approval of Compliance Certifica…

Text truncated - open the document above for the full version.

Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 1/2 . PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: C140808Z13-RP1 FCC ID: NZ3-WSWN683N2P Page 2/2 . RADIATED EMISSION TEST Below 1GHz Above 1GHz