NZ3-WSWN683NAWireless N 150 Mbps USB Receiver with Antenna

Wireless N 150Mbps USB Receiver with Antenna WS-WN683NA,U12-42422 Quick install guide Introduction Thank you for purchasing the Wireless-N USB Adapter,. Wireless-N USB 2.0 Adapter allows you to connect your laptop or desktop to any Wireless-N networks in your home or office. The Wireless-N (802.11n) USB 2.0 Adapter is great for those who want to upgrade older computers to be able to access the internet over a Wireless-N network. Package Contents • Wireless-N USB Adapter • Setup CD with user manual • Quick install guide System Requirements• Notebook or desktop PC with Pentium 1 GHz-compatible or higher processor • Windows 2000/XP/Vista/7, MAC OS, Linux • Available Hi-Speed USB 2.0 port Installation IMPORTANT: For proper operation, do not connect the Wireless-N USB Adapter to your computer before you install the software. If you do, wait for the Found New Hardware screen to display and click “Cancel”; otherwise, the installation process will likely be adversely affected. Insert the included setup CD in the CD-ROM Drive and start the Setup.exe program. To start the installation, please click on the “USB Wireless 802.11N Drivers” Wait for the installer to run Select Language and click “Next” to continue with the installation . The installer will automatically install the program. When done Select Yes, I want to restart my computer now and click Finish to reboot your computer. With the computer now turned on, insert the Wireless-N USB Adapter into an open USB 2.0 port. With the Welcome to the Found New Hardware Wizard screen displayed (which is automatic when the adapter is connected to the .computer), select the option “No, not this time” and click “Next.” When prompted with “What do you want the wizard to do?” select “Install the software automatically (Recommended)” and click “Next.” A status screen will display, indicating that the installation is in progress. No action is needed at this point. When the Completing the Found New Hardware Wizard screen displays, it indicates that the installation has been successfully completed and your Wireless-N USB Adapter is ready for configuration. Configuration Once the installation is complete, you can configure the Wireless-N USB Adapter to connect to a wireless access point (AP). The wireless configuration utility will start automatically, and you’ll also find a tray icon at the lower right in your Windows systems tray. 1. Right-click the Wireless tray icon and select “Open Config Utility.” 2. The configuration utility will scan for wireless networks within range. Click “Refresh” to refresh the list of available wireless networks. To join a particular network that displays, select it and click “Add to Profile.” 3. If the wireless network uses encryption, you need to input the correct encryption key. The configuration utility automatically suggests the correct authentication type (see the drop-down list), and you should not change the suggested value. NOTE: For WPA/WPA2 networks, you need to select the correct encryption type, as well (AES or TKIP). These settings depend on how the wireless network is set up. Only the owner of the wireless network can provide the required information. *** When you select the TKIP encryption mode, the speed would switch to 802.11g 54M following the TKIP protocol 4. If the wireless access point is successfully connected, you’ll see. NOTE: For advanced settings and additional features of the Wireless-N USB Adapter, refer to the user manual on the enclosed CD. FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The Maximum SAR value:0.470W/Kg

FCC response on 10/09/2014 Tracking number 510162 For SAR testing, the device should still follow the USB dongle procedures in KDB 447498 DO2 and use a 5mm test separation distance. Treat the device as though there was a full sized USB connector attached to it (as a standard USB dongle has). It is understood that a cable must be used instead of a direct laptop connection. Because the device uses an external dipole antenna, the normal testing of 4 sides and tip does not apply. Test the Horizontal Up and Horizontal Down positions of the dongle with the antenna in straight mode. The testing of the tip is not necessary. If the two measured SAR levels are similar, then additionally test the Horizontal Up position with the antenna bent at 90 degrees, perpendicular to the phantom (antenna pointing down and away from the phantom) and SAR testing conditions for this dongle will be satisfied (3 test positions total). If the SAR levels for the Horizontal Up and Horizontal Down positions of the dongle in antenna straight mode are not similar, then the antenna is not symmetrical and the Vertical Front and Vertical Back positions in antenna straight mode also need to be tested (5 test positions total).

Report No.: C140808Z12-RP1 Page 1 / 4 External Photos of EUT Report No.: C140808Z12-RP1 Page 2 / 4 Report No.: C140808Z12-RP1 Page 3 / 4 Report No.: C140808Z12-RP1 Page 4 / 4

Label location

ULTRA Wireless N USB Adapter 150Mbps Hi‐Gain Model:WS‐WN683NA U12‐43871 FCC ID:NZ3‐WSWN683NA Input: DC 5V Winstars Technology Limited

Report No.: C140808Z12-RP1 Page 1 / 2 Internal Photos of EUT Report No.: C140808Z12-RP1 Page 2 / 2 RF Module

FCC ID APPLIC PRODU BRAND MODEL CLIENT DATE O STAND REPOR A CAUTIO This rep laborato CATION PUR UCT DESIGN D NAME L NAME T OF ISSUE DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Rep : RPOSE : NATION : : : : : : : tion of G ot be repro all not be qu R Te port No.: A NZ3‐WS W Original E Wireless N ULTRA WS‐WN68 Winstars Sep. 02,20 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC0086 WN683NA Equipment N 150Mbps U 83NA, U12‐4 Technology 014 1528:2003 2.1093 SI C95.1 Complia ept in full w of context. Rep 66140802 USB Receive 42422 Limited ance(Sh without the T CN port 2FH01 r With Anten henzhen e written pe TESTING NAS L5488 t nna n) Co., L ermission o Page 1 Ltd. of the test of 73 Report No.:AGC00866140802FH01 Page 2 of 73 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 02,2014 Valid Original Report The test plans were performed in accordance with IEEE Std. 1528:2003; 47CFR § 2.1093; IEEE/ANSI C95.1 and the following specific FCC Test Procedures: ·KDB 447498 D01 General RF Exposure Guidance v05r02 ·KDB 865664 D01 SAR measurement 100 MHz to 6 GHz v01r03 ·KDB 248227 D01 SAR meas for 802 11 a b g v01r02 App App Buy Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre yer nufacturer N nufacturer A duct Design nd Name del Name erent Descri T Voltage plicable Stan t Date formed Loca port Templat e : ess : : Name : Address : nation : : : iption : ndard : : ation te Tes Wins Block Shen Strea Wins Block Shen Wirel ULTR WS-W All m WS- W DC 5 IEEE 47CF IEEE Aug. Attes 2 F, B Stree AGC Teste Check e Authoriz st Rep tars Techno k 4, TaiSong nzhen, China ak Products tars Techno k 4, TaiSong nzhen, China ess N 150M RA WN683NA, U odels are id WN683NA. 5V by USB E Std. 1528:2 FR § 2.1093 E/ANSI C95. 27,2014 station of Glo Building 2, N et, Bao'an D RT-US-3G3 d By ed By zed By port C ology Limited g Industrial P a Inc. ology Limited g Industrial P a Mbps USB R U12-42422 entical to ea 2003 1 obal Complia No.1-No.4, C istrict, Shen /SAR (2014 Eric Zh Angela Solger Z Certific d Park, DaLan d Park, DaLan Receiver With ach other ex ance(Shenz Chaxi Sanwe nzhen, China 4-04-01) hou S a Li S hang S Report cation g Street, Lo g Street, Lo h Antenna xcept their m zhen) Co., L ei Technical a Sep. 02,201 Sep. 02,201 Sep. 02,201 t No.:AGC00 n ongHua Tow ongHua Tow model names td. Industrial Pa 14 14 14 0866140802 Page 3 n, Bao'an D n, Bao'an D s. The test m ark, Gushu, FH01 of 73 istrict istrict model is Xixiang Report No.:AGC00866140802FH01 Page 4 of 73 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT DESCRIPTION ...................................................................................................................................... 6 2.2. TEST PROCEDURE ...................................................................................................................................... 6 2.3. TEST ENVIRONMENT .................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 7 3.1. SPECIFIC ABSORPTION RAT E (SAR) ............................................................................................................. 7 3.2. SAR MEASUREMENT PROCEDURE ............................................................................................................... 8 3.3. DASY5 SYSTEM DESCRIPTION .................................................................................................................... 9 3.4. DASY5 E-FIELD PROBE ............................................................................................................................. 11 3.5. ISOTROPIC E-FIELD PROBE SPECIFICATION .................................................................................................. 11 3.6. ROBOT ...................................................................................................................................................... 11 3.7. LIGHT BEAM UNIT ..................................................................................................................................... 12 3.8. DEVICE HOLDER ....................................................................................................................................... 12 3.9. MEASUREMENT SERVER ............................................................................................................................ 12 3.10. SAM TWIN PHANTOM .............................................................................................................................. 13 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 14 4.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID ................................................................................... 14 4.2. TISSUE CALIBRATION RESULT ..................................................................................................................... 15 4.3. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS .............................................................. 16 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 17 5.1. SAR SYSTEM VALIDATION PROCEDURES .................................................................................................... 17 5.2. SAR SYSTEM VALIDATION .....................................................................................................…

Text truncated - open the document above for the full version.

Report No.:AGC00866140802FH01 Page 40 of 73 ANTENNA-DOWN Report No.:AGC00866140802FH01 Page 41 of 73 DEPTH OF THE LIQUID IN THE PHANTOM—ZOOM IN Note：The position used in the measurement were according to IEEE 1528-2003 Report No.:AGC00866140802FH01 Page 42 of 73 EUT PHOTOGRAPHS TOP VIEW OF EUT FRONT VIEW OF EUT Report No.:AGC00866140802FH01 Page 43 of 73 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.:AGC00866140802FH01 Page 44 of 73 RIGHT VIEW OF EUT OPEN VIEW OF EUT-1 Report No.:AGC00866140802FH01 Page 45 of 73 OPEN VIEW OF EUT-2 OPEN VIEW OF EUT-3 Report No.:AGC00866140802FH01 Page 46 of 73 OPEN VIEW OF EUT-4 INTERNAL VIEW OF EUT-1 Report No.:AGC00866140802FH01 Page 47 of 73 INTERNAL VIEW OF EUT-2

Report No.:AGC00866140802FH01 Page 48 of 73 APPENDIX D. PROBE CALIBRATION DATA Report No.:AGC00866140802FH01 Page 49 of 73 Report No.:AGC00866140802FH01 Page 50 of 73 Report No.:AGC00866140802FH01 Page 51 of 73 Report No.:AGC00866140802FH01 Page 52 of 73 Report No.:AGC00866140802FH01 Page 53 of 73 Report No.:AGC00866140802FH01 Page 54 of 73 Report No.:AGC00866140802FH01 Page 55 of 73 Report No.:AGC00866140802FH01 Page 56 of 73 Report No.:AGC00866140802FH01 Page 57 of 73 Report No.:AGC00866140802FH01 Page 58 of 73 Report No.:AGC00866140802FH01 Page 59 of 73 APPENDIX E. DAE CALIBRATION DATA Report No.:AGC00866140802FH01 Page 60 of 73 Report No.:AGC00866140802FH01 Page 61 of 73 Report No.:AGC00866140802FH01 Page 62 of 73 Report No.:AGC00866140802FH01 Page 63 of 73 Report No.:AGC00866140802FH01 Page 64 of 73 APPENDIX F. DIPOLE CALIBRATION DATA Report No.:AGC00866140802FH01 Page 65 of 73 Report No.:AGC00866140802FH01 Page 66 of 73 Report No.:AGC00866140802FH01 Page 67 of 73 Report No.:AGC00866140802FH01 Page 68 of 73 Report No.:AGC00866140802FH01 Page 69 of 73 Report No.:AGC00866140802FH01 Page 70 of 73 Report No.:AGC00866140802FH01 Page 71 of 73 Report No.:AGC00866140802FH01 Page 72 of 73 Report No.:AGC00866140802FH01 Page 73 of 73

Report No.: C140808Z12-RP1 FCC ID: NZ3-WSWN683NA Page 1 / 86 FCC 47 CFR PART 15 SUBPART C for Wireless N 150Mbps USB Receiver with Antenna Model: WS-WN683NA,U12-42422 Brand: ULTRA Test Report Number: C140808Z12-RP1 Issued Date: August 22, 2014 Issued for Winstars Technology Limited Block 4, TaiSong Industrial Park, Dalang Street, LongHua Town, Bao’an district, Shenzhen, China Issued by: Compliance Certification Services (Shenzhen) Inc. No.10-1 Mingkeda Logistics park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen, China TEL: 86-755-28055000 FAX: 86-755-28055221 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NVLAP, NIST or any government agencies. The test results in the report only apply to the tested sample. 检 测 CNAS L4818 Report No.: C140808Z12-RP1 FCC ID: NZ3-WSWN683NA Page 2 / 86 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 August 22, 2014 Initial Issue ALL Nancy Fu Report No.: C140808Z12-RP1 FCC ID: NZ3-WSWN683NA Page 3 / 86 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1 TEST CERTIFICATION.................................................................................................. 4 2 TEST RESULT SUMMARY............................................................................................ 5 3 EUT DESCRIPTION ....................................................................................................... 6 4 TEST METHODOLOGY ................................................................................................. 7 4.1. DESCRIPTION OF TEST MODES ...................................................................................... 7 5 SETUP OF EQUIPMENT UNDER TEST........................................................................ 8 5.1. DESCRIPTION OF SUPPORT UNITS................................................................................. 8 5.2. CONFIGURATION OF SYSTEM UNDER TEST ................................................................. 8 6 FACILITIES AND ACCREDITATIONS .......................................................................... 9 6.1. FACILITIES .......................................................................................................................... 9 6.2. ACCREDITATIONS ............................................................................................................. 9 6.3. MEASUREMENT UNCERTAINTY....................................................................................... 9 7 FCC PART 15.247 REQUIREMENTS.......................................................................... 10 7.1. POWER LINE CONDUCTED EMISSIONS MEASUREMENT........................................... 10 7.2. SPURIOUS EMISSIONS MEASUREMENT....................................................................... 14 7.3. 6dB BANDWIDTH MEASUREMENT ................................................................................. 46 7.4. PEAK OUTPUT POWER ................................................................................................... 56 7.5. BAND EDGES MEASUREMENT....................................................................................... 59 7.6. PEAK POWER SPECTRAL DENSITY MEASUREMENT.................................................. 77 Report No.: C140808Z12-RP1 FCC ID: NZ3-WSWN683NA Page 4 / 86 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1 TEST CERTIFICATION Product Wireless N 150Mbps USB Receiver with Antenna Model WS-WN683NA,U12-42422 Brand ULTRA Tested August 8~ August 22, 2014 Applicant Winstars Technology Limited Block 4, TaiSong Industrial Park, Dalang Street, LongHua Town, Bao’an district, Shenzhen, China Manufacturer Winstars Technology Limited Block 4, TaiSong Industrial Park, Dalang Street, LongHua Town, Bao’an district, Shenzhen, China APPLICABLE STANDARDS Standard Test Type Standard Test Type 15.207(a) Power Line Conducted Emissions 15.247(d) 15.209(a) z Spurious Emissions z Conducted Measurement z Radiated Emissions 15.247(a)(2) 6dB Bandwidth Measurement 15.247(b)(3) 15.247(b)(4) Peak Power Measurement 15.247(d) Band Edges Measurement 15.247(e) Peak Power Spectral Density We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by: Reviewed by: Sunday Hu Supervisor of EMC Dept. Compliance Certification Service Inc. Ruby Zhang Supervisor of Report Dept. Compliance Certification Service Inc. Report No.: C140808Z12-RP1 FCC ID: NZ3-WSWN683NA Page 5 / 86 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 2 TEST RESULT SUMMARY APPLICABLE STANDARDS Standard Test Type ResultRemark 15.247(a)(2) 6dB Bandwidth Measurement PassMeet the requirement of limit. 15.247(b)(3) 15.247(b)(4) Peak Power Measurement PassMeet the requirement of limit. 15.247(d) Band Edges Measurement PassMeet the requirement of limit. 15.247(e) Peak Power Spectral Density PassMeet the requirement of limit. 15.247(d) 15.209(a) z Spurious Emissions z Conducted …

Text truncated - open the document above for the full version.

Report No.: C140808Z12-RP1 FCC ID: NZ3-WSWN683NA Page 1/2 . PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: C140808Z12-RP1 FCC ID: NZ3-WSWN683NA Page 2/2 . RADIATED EMISSION TEST Below 1GHz Above 1GHz