NZLCTHL3Universal Garage Door Opener in Mirror

EXHIBIT D: O WNER ’ S M ANUAL [2.1033( A 3)] Recommended Owners Manual for Automatic-Dimming NVS Mirror with Homelink® series Universal Garage Door Opener, Electronic Compass and Outside Temperature Display. Automatic-Dimming NVS   Mirror with Homelink®, Electronic Compass and Outside Temperature Display Suggested Owner’s Manual Text December 2001 Automatic-Dimming Night Vision Safety    (NVS    ) Mirror The NVS Mirror in your vehicle is the most advanced way to eliminate dangerous and annoying glare in the rearview mirror during any driving situation. For more information regarding NVS mirrors and other applications, please refer to the Gentex website – www.gentex.com. Precautions The NVS Mirror automatically reduces glare during driving conditions based upon light levels monitored in front of the vehicle and from the rear of the vehicle. These light sensors are visible through openings in the front and rear of the mirror case. Any object that would obstruct either light sensor will degrade the automatic dimming control feature. Operation The NVS Mirror operates automatically whenever the vehicle ignition is ON. The status of the automatic dimming feature is indicated by a green light on the face of the mirror. To turn the automatic dimming feature off, press the button with the button. The indicator light will turn off to indicate that the automatic dimming feature is off. To turn the automatic dimming feature on, press the button with the button again. The indicator light will also turn on. If the automatic dimming feature is off when the vehicle ignition is turned off, the automatic dimming feature will become active when the vehicle ignition is turned back on. Electronic Compass and Outside Temperature Display The NVS Mirror in your vehicle is also equipped with a display the shows the vehicle heading using the 8 basic cardinal headings (N, NE, E, SE, etc.). The NVS Mirror may also include a display of the outside temperature. For more information regarding these features in the NVS mirrors, please refer to the Gentex website – www.gentex.com. Electronic Compass Mirror Operation The Compass display operates automatically whenever the vehicle ignition is ON. To turn the display feature off, press the button with the symbol. To turn the display feature on, press the button with the symbol again. If the compass display feature is off when the vehicle ignition is turned off, the display feature will turn on again when the vehicle ignition is turned back on. There is a difference between magnetic north and true north. The compass in the mirror can compensate for this difference when it knows what region in which it is operating. This is set either by the dealer or by the user. These operating regions or zones for the continental United States are shown in the figure below. To adjust the zone setting press and hold the button with the symbol for more than 3 seconds. Determine the appropriate zone number based upon your current location and the map provided above. Press and hold the button until the new zone setting appears on the display (note: the numbers will repeat, ...13, 14, 15, 1, 2, ...). Release the button and within about 5 seconds the compass will start displaying a compass direction again. There are some conditions that can cause changes to the vehicle magnets. Items such as installing a ski rack or a CB antenna or even some body repair work on the vehicle can cause changes to the vehicle's magnetic field. In these situations, the compass will need to be re- calibrated to quickly correct for these changes. To re-calibrate the compass, press and hold the button for more than 6 seconds. When the compass memory is cleared a “C” will appear in the display. To calibrate the compass, drive the vehicle is 3 complete circles at less than five mph. Electronic Compass with Outside Temperature Mirror Operation The Compass and Outside Temperature display operates automatically whenever the vehicle ignition is ON. To turn the display feature off, press the button with the symbol. To turn the display feature on, press the button with the symbol again. If the compass and outside temperature display feature is off when the vehicle ignition is turned off, the display feature will turn on again when the vehicle ignition is turned back on. To adjust the outside temperature units (°F or °C) setting press and hold the button for more than 3 seconds. The °F (or °C) will start flashing. Press the button until the correct units are displayed. Wait a few seconds and the mirror will display the current and compass heading and the outside temperature using the selected units. There is a difference between magnetic north and true north. The compass in the mirror can compensate for this difference when it knows what region in which it is operating. This is set either by the dealer or by the user. These operating regions or zones for the continental United States are shown in the figure above. To adjust the zone setting press and hold the button with the symbol for more than 6 seconds. Determine the appropriate zone number based upon your current location and the map provided above. Press and hold the button until the new zone setting appears on the display (note: the numbers will repeat, ...13, 14, 15, 1, 2, ...). Release the button and within about 5 seconds the compass will start displaying a compass direction again. There are some conditions that can cause changes to the vehicle magnets. Items such as installing a ski rack or a CB antenna or even some body repair work on the vehicle can cause changes to the vehicle's magnetic field. In these situations, the compass will need to be re- calibrated to quickly correct for these changes. To re-calibrate the compass, press and hold the button for more than 9 seconds. When the compass memory is cleared a “C” will appear in the display. To calibrate the compass, drive the vehicle is 3 complete circles at less than five mph. HomeLink ® Univer…

Text truncated - open the document above for the full version.

AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014232745 Cover / Confidentiality Request Letter: Page 1 of 2 NVLAP ACCREDITED NARTE Certified Engineer Professional Engineer ELITE Electronic EngineeringMarch 21, 2002 TCB Services 1516 Centre Circle Downers Grove, IL 60515-1082 Re: Application for Certification of Gentex Corporation Transmitter under 47CFR 15.231. FCC ID: NZLCTHL3 Gentlemen: On behalf of the applicant, Gentex Corporation, please find attached the submittal materials for certification of the Universal Garage Door Opener in a Mirror with Compass and Temperature displays, Model NZLCTHL3. This unit is capable of learning the current garage door transmit frequencies from 288MHz through 420MHz except in the forbidden frequency regions. Pursuant to 47CRF 0.459, Gentex Corporation requests that these listed exhibits be held confidential. Circuit Block Diagrams page 2 of Exhibit B Theory/Description of Operation, page 3 of Exhibit B Schematics pages 5 through 11 of Exhibit B Bill of Material, Parts List pages 1 through 8 of Misc. Exhibits The complete List of the Exhibits in this submittal package appears on Page 2 of this cover letter. The enclosec CD contains the electronic copies of the printed materials. A copy of a ‘Power of Attorney” is included to demonstrate that AHD has been authorized to provide the service of preparing this application. Your prompt consideration of this application for product certification will be greatly appreciated. Should you have any questions regarding the content of this report, kindly contact me. Sincerely, Ted Chaffee, Technical Lab Manager Narte Certified Engineer, #EMC-002025-NE tel/fax: 616. 424.7014 email: [email protected], or [email protected] Test report #0100479FFCC 15.231 for NZLCTHL3FCC ID: NZLCTHL3 Tested November 14, 2001 AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014232745 Cover / Confidentiality Request Letter: Page 2 of 2 Table of Contents Cover Letter / Table of ContentsTotal Pages 2 EXHIBIT A: ID Label / Location [2.925,2.926,2.1033(b2,7),15.19(a3)] Total Pages 2 EXHIBIT B: Description of Product [2.1033(b6)] Total Pages 1 Circuit Block Diagram [2.1033(b5)] Total Pages 1 Description of Operation [2.1033(b4)] Total Pages 2 Schematics [2.1033(b5)] EXB_schematic.pdfTotal Pages 7 EXHIBIT C: Product photos nine photosTotal Pages 10 :Interior & Printed Circuit Boards [2.1033(b7)] Five photos EXC_3PCBtop.jpg, EXC_3PCBbtm.jpg, EXC_HL3PCBtop.jpg, EXC_HL3PCBbtm.jpg, EXC_PCBonMRR.jpg Exterior views [2.1033(b7)] Four photos EXC_Mirrorfrnt1.jpg, EXC_Mirrorfrnt2.jpg, EXC_Mirrorrear.jpg, EXC_Mirrorbtm.jpg EXHIBIT D: User’s Manual EXD_OEMUserManual.docTotal Pages 7 EXHIBIT E: Setup photos [2.1033(b8)] Four photosTotal Pages 5 EXE_pretest.jpg, EXE_side.jpg, EXE_end.jpg, EXE_flat.jpg Report of Measurements [2.1033(b6)] Total Pages 34 Table of ContentsPage 2 Manufacturer/Applicant [2.1033(b1)]Page 4 Measurement/Test Facility & EquipmentPage 4 Configuration/Setup [2.1033(b8)]Page 5 Test Standards / Methods Used [2.1033(b6)] Page 8 Test Methodology [2.1033(b6)]Page 8 Test Data [2.1033(b6)] Summary of ResultsPage 6 Level vs Supply Voltage [15.31(e)]Page 14 Occupied BandwidthPage 15 Radiated Field Strength [15.231(b)] Page 17 Misc. EXHIBIT: RF Exposure Information [2.1093(c)]Total Pages 1 Parts List/Tune-up Information [2.1033(b5] Total Pages 7 EXmisc_BOM.pdf

Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_c\EXC_Mirro...

Test report #0100479F FCC 15.231 for NZLCTHL3 FCC ID: NZLCTHL3 Tested November 14, 2001 AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014 EXA_Label Exhibit A: Page 1 of 2 EXHIBIT A: EQUIPMENT LABEL [2.925, 2.926, 2.1033(B2,7), 15.19(A3)] LABEL EXAMPLE For the label print refer to picture file “EXA_Label.jpg” The FCC Identifier assigned to the EUT is FCC ID: NZLCTHL3. This number will be molded into the rear of the mirror housing. Because of the size and location of the transmitter portion of the product, the following statements will appear in the user’s manual. Refer to Exhibit D for the entire text of the user’s manual. “This device complies with FCC rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received including interference that may cause undesired operation. WARNING: The transmitter has been tested and complies with FCC and DOC/MDC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.” FCC ID Number LOCATION The information will be molded onto the outside of the NZLCTHL3 plastic housing. Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_a\EXA_Label....

Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_c\EXC_3PCB... Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_c\EXC_3PCB... Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_c\EXC_HL3P... Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_c\EXC_HL3P... Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_c\EXC_PCBo...

A H D EMC Laboratory 92723 M-152, Dowagiac, MI 49047 USA Phone: (616) 424-7014 www.ahde.com AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014232744 EXHIBIT E: Page 1 of 34 EXHIBIT E: R EPORT OF M EASUREMENTS [2.1033( B 6)] Test Report for FCC ID: NZLCTHL3 FCC Part 2.1031, Part 15 Subpart C(15.231) Report #0100479F Issued 03/19/02 M ODEL NZLCTHL3 NVS υ υυ υ M IRROR WITH H OMELINK θ θθ θ III T RANSMITTER , E LECTRONIC C OMPASS , & T EMPERATURE Prepared for:Mr. Brian Perschbacher Gentex Corporation 600 N. Centennial St. Zeeland, MI 49464 Test Date(s): November 12-14, 2001 data recorded bywitnessed by Ted Chaffee, NCEBrian Perschbacher Test Engineer, AHD This report prepared by: Ted Chaffee, NCE Technical Manager/Test Engineer, AHD Test report #0100479FFCC 15.231 for NZLCTHL3FCC ID: NZLCTHL3 Tested November 14, 2001 AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014232744 EXHIBIT E: Page 2 of 34 TABLE OF CONTENTS EXHIBIT E: Report of Measurements [2.1033(b6)]............................................................................. 1 TABLE OF CONTENTS............................................................................................................... 2 Statements Concerning this Report............................................................................................... 3 Manufacturer/Applicant [2.1033(b1)]............................................................................................ 4 Measurement/Test Site Facility & Equipment................................................................................. 4 Test Site [2.948, 2.1033(b6)]............................................................................................. 4 Measurement Equipment Used [2.947(d), 15.31(b)]............................................................... 4 Tested Configuration /Setup: [2.1033(b8)]..................................................................................... 5 Support Equipment & Cabling................................................................................................ 5 Setup Diagram..................................................................................................................... 5 Summary of Results:................................................................................................................... 6 Changes made to achieve compliance................................................................................... 8 Standards Applied to Test: [2.1033(b6)]....................................................................................... 8 Test Methodology: [2.1033(b6)]................................................................................................... 8 FORMULAS AND SAMPLE CALCULATIONS:.......................................................................10 Test Data [2.1033(b6)]...............................................................................................................12 Modulation Characteristics...................................................................................................12 Relative Emission Level vs. Supply Voltage [15.31(e)]............................................................14 Occupied Bandwidth [15.231(c)]..........................................................................................15 Restricted Bands: [15.205]..................................................................................................16 Radiated Field Strength Measurements: [15.231(b), 15.205].................................................17 Radiated Field Strength Measurements................................................................................19 APPENDIX: Tune Pulses - Data Details..................................................................................29 Test report #0100479FFCC 15.231 for NZLCTHL3FCC ID: NZLCTHL3 Tested November 14, 2001 AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014232744 EXHIBIT E: Page 3 of 34 Statements Concerning this Report NVLAP Accreditation: NVLAP Lab Code 200129-0 The scope of AHD accreditation is the conducted emissions, radiated emissions test methods of: IEC/CISPR 22: Limits and methods measurement of radio disturbance characteristics of information technology equipment. FCC Method – 47 CFT Part 15 – Digital Devices. AS/NZS 3548: Electromagnetic Interference – Limits and Methods of Measurement of Information Technology Equipment. IEC61000-4-2 and Amend.1: ElectroStatic Discharge Immunity Subcontracted Testing: This report does not contain data produced under subcontract. Test Traceability: The calibration of all measuring and test equipment and the measured data using this equipment are traceable to the National Institute for Standards and Technology (NIST). Limitations on results: The test results contained in this report relate only to the Item(s) tested. Any electrical or mechanical modification made to the test item subsequent to the test date shall invalidate the data presented in this report. Any electrical or mechanical modification made to the test item subsequent to this test date shall require an evaluation to verify continued compliance. Limitations on copying: This report shall not be reproduced, except in full, without the written approval of AHD. Limitations of the report: This report shall not be used to claim product endorsement by NVLAP, FCC, or any agency of the US Government. Statement of Test Results Uncertainty: Following the guidelines of NAMAS publication NIS81 and NIST Technical Note 1297, the Measurement Uncertainty at a 95% confidence level is determined to be: ± 1.4 dB Test report #0100479FFCC 15.231 for NZLCTHL3FCC ID: NZLCTHL3 Tested November 14, 2001 AHD EMC Lab, 92723 M152, Dowagiac, MI 49047, (616) 424-7014232744 EXHIBIT E: Page 4 of 34 Manufacturer/Applicant [2.1033(b1)] The manufacturer and applicant: GENTEX CORPORATION 600 N. Centennial St. Zeeland, Michigan 49464 Measurement/Test Site Facility & Equipment Test Site [2…

Text truncated - open the document above for the full version.

Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_e\EXE_end.jpg Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_e\EXE_flat.jpg Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_e\EXE_Pretest.jpg Page 1 of 1 3/22/2002file://C:\TCB%20Certifications\FCC%20Work\AHD\NZLCTHL3\TCBEX_e\EXE_side.jpg