O6R02162LOW POWER TRANSMITTER (2400-2483.5)

Note: information below must appear in User Documentation and/or Packaging. Dynastream Innovations Foot Pod 011-02215-0x Quick Reference Guide FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two (2) conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received including interference that may cause undesired operation. This product does not contain any user-serviceable parts. Repairs should only be made by an authorized service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations Industry Canada Compliance Category I radio communication devices comply with Industry Canada Standard RSS-210. Category II radio communication devices comply with Industry Canada Standard RSS-310. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée pour deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible de compromettre le fonctionnement. Declaration of Conformity Hereby, Garmin (or BRAND NAME, if applicable) declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, see the Garmin Web site for your product: www.garmin.com/declaration-of-conformity (or alternate). Markings Required: ANT+ Logo CE Logo FCC logo Australia / New Zealand C-Tick logo with code N20233 Dynastream Technology logo WEEE Wheelie Bin Optional Information: Battery Information WARNING: Do not use a sharp object to remove user replaceable batteries. Contact your local waste disposal department to properly recycle the batteries. When the battery is low, a message appears on your receiver. Approximately five hours of foot pod battery life remain. Technical Specifications Physical size: L × W × H: 35 mm × 25 mm × 8 mm (excluding clip) Weight: 10 g (including battery) Water Resistance: 10 m Transmission range: Minimum 3 m (9.8 ft.) Speed and distance accuracy: Uncalibrated 95%, calibrated 98% Battery: User-replaceable CR2032 (3 volts) Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Battery life: 400 hours run time Operating temperature: From -10°C to 60°C (From 14°F to 140°F) Sensor Accuracy Range: From 0°C to 40°C (From 32°F to 104°F) Radio frequency/protocol: 2.4 GHz ANT ™, System Compatibility: ANT+™

May 18, 2013 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Dynastream Innovations, Inc. #201, 100 Grand Blvd Cochrane, Alberta Canada T4C OS4 Re: Confidentiality for submittal information regarding FCC ID number O6R02162 PRODUCT: Low power Transmitters operated under part 15.249. Dear Sirs: Dynastream Innovations, Inc. requests that the material in the Schematics, Block Diagram, and Operational Description be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. In support of this request, Dynastream Innovations, Inc. submits the following information. CONFIDENTIAL FILES Conf BlkDia 02162.pdf Conf OpDes 02162.pdf Conf Schem 02162.pdf 1. Identification of the specific information for which confidential treatment is sought: The materials set fourth in the Operational Description, block diagram, parts list, and Schematics, which are segregated, from the non-confidential exhibits of the application, are those for which confidentiality is sought. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission: The proceeding is that involving the application for equipment authorization (certification) under FCC ID No: O6R02162 3. Explanation of the degree to which the information is commercial or financial, or contains a trade secret or is privileged: This material includes a detailed theory of operation, circuit diagrams, and schematic. As such, this material is treated as highly confidential business information. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 4. Explanation of the degree to which the information concerns a service that is subject to competition: The material for which confidentiality is sought is employed in the design and manufacture of this transmitting equipment that is offered on a highly competitive basis. Customers for this equipment have a variety of competing sources. 5. Explanation of how disclosure of the information could result in substantial competitive harm: Disclosure would, in effect, give away the fruits of the labors of Dynastream Innovations, Inc.’s engineering personnel, who have designed the equipment and the manufacturing process. Disclosure would also offer competitors additional unwarranted insight into the state of the product development, thereby allowing competitors an advantage, not available to Dynastream Innovations, Inc. 6. Identification of any measures taken by the submitting party to prevent unauthorized disclosure: The information for which confidential treatment is sought is kept confidential by Dynastream Innovations, Inc. and not made available to third parties except pursuant to non-disclosure agreements. 7. Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: To the knowledge of those preparing this application, the information has not been disclosed publicly heretofore. While the general theory of operation of this equipment has been the subject of numerous disclosures in industry and standards groups as well as in rule making proceedings of the FCC, the protection sought is narrowly drawn and pertains to certain specific implementations of this radio technology. 8. Justification of the period during which the submitting party asserts that the material should not be available for public disclosure: This material should not be disclosed for at least 25 years. While improvements in design are made relatively frequently, disclosure of the design information would lead to insights into both design and manufacturing techniques that could have an adverse competitive effect for many years to come. As such, it is important that the design not be made available to unauthorized persons who might attempt to use knowledge of the design to compromise the applications for which the equipment will be employed. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers

June 18, 2013 Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Applicant: Dynastream Innovations, Inc. #201, 100 Grand Blvd Cochrane, Alberta Canada T4C OS4 Re: Short-term Confidentiality request for submittal information regarding FCC ID: O6R02162 FCC Rules: Parts 2 and 15C Dear Sirs: Dynastream Innovations, Inc. requests that the following information be withheld from public disclosure pursuant to CFR47 paragraphs 0.457 and 0.459, and KDB 726920 until 90 days after the Grant of Equipment Authorization. Disclosure of information would offer competitors additional unwarranted insight into the state of the product development. Short-term confidential files Exhibit File External Photos Short Term Conf ExtPho 02162.pdf Internal Photos Short Term Conf IntPho 02162.pdf Test Setup Photos Short Term Conf TSup 02162.pdf User Manual Short Term Conf UserMan 02162.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 +1 913 837-3214

Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 29, 2013 Revision 1 File: Short Term Conf ExtPho 02162 Page 1 of 2 External photographs of equipment under test Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 29, 2013 Revision 1 File: Short Term Conf ExtPho 02162 Page 2 of 2

Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 29, 2013 Revision 1 File: Short Term Conf IntPho 02162 Page 1 of 1 Internal Photographs

Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 18, 2013 Revision 1 File: TunPro 02162 Page 1 of 1 Tune-up Procedure Each unit is tested during unit production by measuring functional parameters. The unit is assessed for pass/fail status based on test result. The pass/fail threshold is determined by engineering during product development. Samples complying with passing criteria continue through production and units that do not are removed.

NVLAP Lab Code 200087-0 Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 16, 2013 Revision 1 File: Dynastream 02162 TstRpt 130417 Page 1 of 27 Application For Grant of Certification FOR Model: 02162 Low Power Transmitter FCC ID: O6R02162 IC: 3797A-02162 FOR DYNASTREAM INNOVATIONS, INC. #201, 100 Grande Blvd. Cochrane, Alberta T4C 0S4, Canada Test Report Number 130417 Authorized Signatory: Scot D. Rogers NVLAP Lab Code 200087-0 Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 16, 2013 Revision 1 File: Dynastream 02162 TstRpt 130417 Page 2 of 27 Test Report for Application of Certification For DYNASTREAM INNOVATIONS, INC. #201, 100 Grande Blvd. Cochrane, Alberta T4C 0S4, Canada Phone: (403) 932-9292 Mr. Jim Rooney President Model: 02162 Low Power Transmitter Frequency Range: 2,402-2,480 MHz FCC ID: O6R02162 IC: 3797A-02162 Test Report Number: 130417 Test Date: April 17, 2013 Authorized Signatory: Scot D. Rogers Rogers Labs, Inc. 4405 West 259th Terrace Louisburg, KS 66053 Telephone/Facsimile: (913) 837-3214 This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product certification, approval or endorsement by NVLAP, NIST, or any agency of the Federal Government. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 NVLAP Lab Code 200087-0 Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 16, 2013 Revision 1 File: Dynastream 02162 TstRpt 130417 Page 3 of 27 Table of Contents TABLE OF CONTENTS .................................................................................................... 3 REVISIONS ....................................................................................................................... 4 FORWARD ....................................................................................................................... 5 OPINION / INTERPRETATION OF RESULTS ................................................................. 5 EQUIPMENT TESTED SETUP, FUNCTION AND CONFIGURATIONS .......................... 5 Equipment Function and Test Setup ....................................................................................................................... 6 EUT Configuration Options .................................................................................................................................... 6 APPLICATION FOR CERTIFICATION ............................................................................. 7 STATEMENT OF MODIFICATIONS AND DEVIATIONS ................................................. 8 APPLICABLE STANDARDS & TEST PROCEDURES .................................................... 8 EQUIPMENT TESTING PROCEDURES .......................................................................... 8 AC Line Conducted Emission Test Procedure ....................................................................................................... 8 Diagram 1 Test arrangement for Conducted emissions .......................................................................................... 9 Radiated Emission Test Procedure ......................................................................................................................... 10 Diagram 2 Test arrangement for radiated emissions of tabletop equipment .......................................................... 10 Diagram 3 Test arrangement for radiated emissions tested on Open Area Test Site (OATS) ............................... 11 TEST SITE LOCATIONS .................................................................................................. 12 UNITS OF MEASUREMENTS .......................................................................................... 12 ENVIRONMENTAL CONDITIONS.................................................................................... 12 LIST OF TEST EQUIPMENT ............................................................................................ 13 INTENTIONAL RADIATORS ............................................................................................ 14 Antenna Requirements ............................................................................................................................................. 14 Restricted Bands of Operation ................................................................................................................................ 14 Table 1 Radiated Emissions in Restricted Bands Data ........................................................................................... 15 Summary of Results for Radiated Emissions in Restricted Bands ....................................................................... 15 General Radiated EMI Testing Procedure ............................................................................................................. 16 Table 3 General Radiated Emissions Data (worst-case) ........................................................................................ 17 NVLAP Lab Code 200087-0 Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 16, 2013 Revision 1 File: Dynastream 02162 TstRpt 130417 Page 4 of 27 Summary of Results for General Radiated Emissions ................................................…

Text truncated - open the document above for the full version.

Rogers Labs, Inc. Dynastream Innovations, Inc. 4405 West 259 th Terrace Model: 02162 IC: 3797A-02162 Louisburg, KS 66053 Test #:130417 SN: 17638 FCC ID: O6R02162 Phone/Fax: (913) 837-3214 Test to: FCC CFR 47 15.249, RSS 210 Date: May 29, 2013 Revision 1 File: Short Term Conf TSup 02162 Page 1 of 1 Test setup photographs