O6YUTS-702PUTS-702P

Operating Instructions Telephone handset UTS-702 Thank you for purchasing the UTS-702 telephone handset. Please read the operating instructions carefully. Please store this manual in a safe place for future reference. Charge battery before operation. 1 2 A B C o 3 D E F 4 G H I 5 JK L 6 M N O 7 QR S 8 T U V 9 XY Z W P MENU CLR MEMO FLASH VOL/SEARCH ALPH MUTE TAM Copyright 1999 UTStarcom, Inc. All Rights Reserved. SAFETY Information: This wireless hand phone has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for General Population/Uncontrolled exposure environment. In addition, it complies with the following Standards and Guidelines: FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio-Frequency Radiation. FCC OET Bulletin 65 Edition 97-01 (1997) Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. ANSI/IEEE C95.3-1992, IEEE Recommended Precautions .............................................................................................. 1 Phone Overview ..................................................................................... 4 Front view ............................................................................................. 4 Rear and side views ........................................................................... 5 Display .................................................................................................... 6 Signal strength ..................................................................................... 7 Battery level ......................................................................................... 7 Power On/Off ........................................................................................ 8 Charging ................................................................................................. 9 Battery Duration Time ............................................................................ 9 Low Battery ............................................................................................. 10 Making a Call ........................................................................................ 11 Receiving a Call ..................................................................................... 12 Hold ........................................................................................................ 13 Last Number ........................................................................................... 14 Call Back ................................................................................................ 15 Outside Service Area ............................................................................ 16 Phonebook .............................................................................................. 17 Storing a phone number .................................................................... 17 Storing the last number dialed or received ...................................... 21 Making a call from Phonebook ............................................................ 22 Recalling by name .............................................................................. 22 Recalling by location number ............................................................ 24 Correcting Data in Phonebook ............................................................ 25 Deleting Data in Phonebook .................................................................. 26 Pause Dial ............................................................................................... 28 Ring Volume and Tone Types ................................................................ 30 Adjusting the ring volume ................................................................... 30 Selecting a ring tone type ................................................................... 31 Sample tone on/off ............................................................................. 32 Adjusting Earpiece Volume .................................................................... 33 Table of contents Key Lock .............................................................................................. 33 Security ID .......................................................................................... 34 Dial Lock .............................................................................................. 35 To activate dial lock ........................................................................ 35 To deactivate dial lock .................................................................... 36 Phonebook Lock ................................................................................. 37 Other Function Settings ...................................................................... 38 Zone-in tone ..................................................................................... 38 Echo suppression ............................................................................. 39 Charge check tone .......................................................................... 40 Key tone ............................................................................................ 41 Calling line Identification ................................................................ 42 Auto call ........................................................................................... 43 Any key answer ............................................................................... 44 Power saving ................................................................................... 45 TAM ( Telephone Answering Machine) ........................................... 46 Recording your outgoing message ............................................... 46 Activating TA…

Text truncated - open the document above for the full version.

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 4 of 63 1 LETTER OF AGENCY

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 5 of 63 2 LETTER OF CONFIDENTIAL

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 29 of 63 19 EXTERNAL PHOTOGRAPHS C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 30 of 63

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 22 of 63 14 LABEL INFORMATION 14.1 FCC ID L ABEL 14.2 L OCATION OF L ABEL ON EUT Label will be placed where battery pack is installed on the device. UTStarcom UTS 702 FCC ID: O6YUTS-702P

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 26 of 63 18 INTERNAL PHOTOGRAPHS C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 27 of 63 C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 28 of 63

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 23 of 63 15 PRODUCT DESCRIPTION The Radio Port (RP) is the radio equipment base station that relays the communication from the user side to the operator/network side and conversely. A standard installation for RP applications places several RPs in a common service area, however the number of RPs and their distribution deployment depend on the following factors: • Topography of the service area • Subscriber distribution in the service area • Desired Grade of Service and traffic load. There are two types of RPs: • Outdoor - is small in size and is encased in a weather-proof cabinet. This gives it the potential for various mounting scenarios - installed on the pole, buildings, or traffic lights. • Indoor - is also small in size and can be installed in public and semi-public locations like a government offices, bank, or an office building. The power for the RP is fed from the RPC and a synchronous clock is delivered from the RPC. The radio link between RP and FSU, or RP and PS is based on RCR-STD 28 Ver.2 PHS technology, which defines frequency bands, protocol, and so on. Both indoor and outdoor RPs have a 2 branch built-in antenna. The architecture of the Airstar-WLL system is shown in Figure Error! No text of specified style in document.-1. This is followed by a block diagram of the RP. Phone FAX Computer Modem Fixed Ssubscriber Unit Phone FAX Computer Modem Indoor RP Outdoor RP Radio Port C on troller Up to 32 Copper Pair Up to 5Km Copper Pair Up to 5Km ..... ..... ..... Personal Station A ir Interface RCR STD-28 Main Distribution Frame Central O ffice Terminal 4 E1s ..... ..... ..... Personal Station Fixed Ssubscriber Unit Figure Error! No text of specified style in document.-1 : Overview of RPs in Airstar-WLL Architecture switch switch switch transceiver synthesizer receiver 1 receiver 2 modulator demodulator 1 demodulator 2 level comparison TDMA processor switch RPC interface to RPC control unit Figure Error! No text of specified style in document.-2 : Radio Port Block Diagram

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 20 of 63 12 FCC RULES AND REGULATIONS PART 1.1307, 1.1310, 2.1091, 2.1093: RF EXPOSURES COMPLIANCE Please see SAR Test Reports.

1900MHz Brain Dipole Validation Generic Twin Phantom; Flat Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Brain: σ = 1.82 mho/m ε r = 40.4 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 11.0 mW/g, SAR (10g): 5.50 mW/g 1900MHz Brain Dipole Validation (D1900V2 S/N: 502) Frequency: 1900 MHz; Antenna Input Power: 250 [mW] PCTEST Brain Tissue Simulating Liquid SAR Tot [mW/g] 9.50E-1 2.83E+0 4.72E+0 6.45E+0 8.50E+0 PCTEST Engineering Laboratory, Inc.

1900MHz Muscle Dipole Validation Generic Twin Phantom; Flat Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Muscle: σ = 1.85 mho/m ε r = 54.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 10.6 mW/g, SAR (10g): 5.67 mW/g 1900MHz Muscle Dipole Validation (D1900V2 S/N: 502) Frequency: 1900 MHz; Antenna Input Power: 250 [mW] PCTEST Muscle Tissue Simulating Liquid SAR Tot [mW/g] 9.94E-1 2.98E+0 4.97E+0 6.96E+0 8.95E+0 PCTEST Engineering Laboratory, Inc.

© 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA) © 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA) © 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA)

© 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA) © 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA)

© 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA) © 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA) © 2000 PCTEST Lab UTStarcom (Model: UTS-702/P) NVLAP Lab Code: 1004310 Single-Mode Single Band PHS Phone (TDMA)

Probe ET3DV5 SN:1370 Manufactured: February 1999 Calibrated: February 2000 Calibrated for System DASY3 Page 1 of 8 ET3DV5 SN:1370 Introduction The performance of all probes is measured before delivery. This includes an assessment of the characteristic parameters, receiving patterns as a function of frequency, frequency response and relative accuracy. Furthermore, each probe is tested in use according to a dosimetric assessment protocol. The sensitivity parameters (NormX, NormY, NormZ), the diode compresion parameter (DCP) and the conversion factor (ConvF) of the probe and some of the measurement diagrams are given in the following. The performance of the individual probes varies slightly due to tolerances arising from the manufacturing process. Since the lines are highly resistive (several MOhms), the offset and noise problem is greatly increased if signals in the low μ V range are measured. Accurate measurement below 10 μW/g are possible if the following precautions are taken. 1) check the current grounding with the multimeter 1 , i.e., low noise levels, 2) compensate the current offset 1 , 3) use long integration time (approx. 10 seconds), 4) calibrate 1 before each measurement, 5) persons should avoid moving around the lab while measuring. Since the field distortion caused by the supporting material and the sheath is quite high in the θ direction, the receiving pattern is poor in air. However, the distortion in tissue equivalent material is much less because of its high dielectricity. In addition, the fields induced in the phantoms by dipole structures close to the body are dominently parallel to the surface. Thus, the error due to non-isotropy is much better than 1 dB for dosimetric assessments. The probes are calibrated in the TEM cell ifi 110 although the field distribution in the cell is not very uniform and the frequency response is not very flat. To ensure consistency, a strict protocol is followed. The conversion factor (ConF) between this calibration and the measurement in the tissue simulation solution is performed by comparison with temperature measurements and computer simulations. This conversion factor is only valid for the specified tissue simulating liquids at the specified frequencies. If measurements have to be performed in solutions with other electrical properties or at other frequencies, the conversion factor has to be assessed by the same procedure. As the probes have been constructed with printed resistive lines on ceramic substrates (thick film technique), the probe is very delicate with respect to mechanical shocks. Attention: Do not drop the probe or let the probe collide with any solid object. Never let the robot move without first activating the emergency stop feature (i.e., without first turning the data acquisition electronics on). 1 Feature of the DASY Software Tool. Fig 1: Due to the field distortion caused by the supporting material, the probe has two charac- teristic directions, referred to as angle ψ and θ . Page 2 of 8 ET3DV5 SN:1370 DASY3 - Parameters of Probe: ET3DV5 SN:1370 Sensitivity in Free Space NormX1.58μV/(V/m) 2 NormY1.64μV/(V/m) 2 NormZ1.80μV/(V/m) 2 Diode Compression DCP X96mV DCP Y96mV DCP Z96mV Sensitivity in Tissue Simulating Liquid 450 MHzConvF X6.5extrapolated ε r = 48 ± 5% ConvF Y6.5extrapolated σ =0.50 ± 10%mho/m ConvF Z6.5extrapolated(brain tissue simulating liquid) 900 MHz ConvF X6.0± 10% ε r = 42.5 ± 5% ConvF Y6.0± 10% σ =0.86 ± 10%mho/m ConvF Z6.0± 10%(brain tissue simulating liquid) 1500 MHz ConvF X5.4interpolated ε r = 41 ± 5% ConvF Y5.4interpolated σ =1.32 ± 10%mho/m ConvF Z5.4interpolated(brain tissue simulating liquid) 1800 MHz ConvF X5.1± 10% ε r = 41 ± 5% ConvF Y5.1± 10% σ =1.69 ± 10%mho/m ConvF Z5.1± 10%(brain tissue simulating liquid) Sensor Offset Probe Tip to Sensor Center2.7mm Surface to Probe Tip1.6 ± 0.2mm Page 3 of 8 ET3DV5 SN:1370 Receiving Pattern (φ), θ = 0° f = 30 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 100 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 300 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 900 MHz, TEM cell ifi110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot Page 4 of 8 ET3DV5 SN:1370 Isotropy Error (φ), θ = 0° -1.00 -0.80 -0.60 -0.40 -0.20 0.00 0.20 0.40 0.60 0.80 1.00 060120180240300360 error[dB] 30 MHz 100 MHz 300 MHz 900 MHz 1800 MHz 2500 MHz f = 1800 MHz, WG R22 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot f = 2500 MHz, WG R26 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 XYZTot Page 5 of 8 ET3DV5 SN:1370 Frequency Response of E-Field ( TEM-Cell:ifi110, Waveguide R22, R26 ) 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 050010001500200025003000 f [MHz] frequency response TEMR22R26 Page 6 of 8 ET3DV5 SN:1370 Dynamic Range f(SAR brain ) ( TEM-Cell:ifi110 ) 1.E+0 1.E+1 1.E+2 1.E+3 1.E+4 1.E+5 1.E+6 1.E+7 0.00010.0010.010.11.10.100. mW/cm 3 μ V not compensatedcompensated -3 -2 -1 0 1 0.00010.0010.010.1110100 mW/cm 3 errror[dB] not compensated diode characteristic compensated relative accuracy Page 7 of 8 ET3DV5 SN:1370 Conversion Factor Assessment Receiving Pattern (φ) ( in brain tissue, z = 5 mm ) -1.00 -0.80 -0.60 -0.40 -0.20 0.00 0.20 0.40 0.60 0.80 1.00 060120180240300360 error[dB] 900 MHz1800 MHz f = 900 MHz, WG R9 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0204060 z[mm] SAR[mW/cm 3 ] / W AnalyticalMeasuremets f = 1800 MHz, WG R22 0.00 0.50 1.00 1.50 2.00 2.50 020…

Text truncated - open the document above for the full version.

© 2000 PCTEST Engineering Lab., Inc. PCTEST Engineering Laboratory, Inc. 66606660--B Dobbin Road B Dobbin Road •• Columbia, MD 21045 Columbia, MD 21045 •• U.S.A. U.S.A. TEL (410) 290TEL (410) 290--6652 6652 •• FAX (410) 290 FAX (410) 290--66546654 http://www.pctestlab.comhttp://www.pctestlab.com CERTIFICATE OF COMPLIANCE (SAR EVALUATION) UTStarcom Dates of Tests: July 31, 2000 New Jersey R&D Center, Test Report S/N: SAR.200731387.O6Y 33 Wood Avenue South, 3rd Floor, Test Site: PCTEST Lab, Columbia, MD USA Iselin, NJ 08830 U.S.A. Attn: Scott E. Black, EMI/Safety Engineer FCC ID O6YUTS-702P APPLICANT UTStarcom EUT Type: Single-Mode Single Band Phone (TDMA) Personal Handyphone Standard (PHS) Phone Tx Frequency: 1893.650 – 1919.150 MHz (TDMA) Rx Frequency: 1893.650 – 1919.150 MHz (TDMA) Max. SAR Measurement: 0.0648W/kg TDMA PHS Head SAR; 0.149 W/kg TDMA PHS Body SAR Max. Conducted Power: Software Controlled ALC Value = B4H; EIRP Not Verified Trade Name: UTSTARCOM Model: UTS 702P FCC Classification: Licensed Portable Transmitter Held to Ear (PCE) Application Type: Certification FCC Rule Part(s): §2.1093; ET Docket 96.326 This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in ANSI/IEEE Std. C95.3-1992. (See Test Report). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. NVLAP accreditation does not constitute any product endorsement by NVLAP or any agency of the United States Government. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). 200210055.A3L SAR Measurement Report FCC Part 24/22 Certification © 2000 PCTEST Lab i Table of Contents 1.1 SCOPE 1 2.1 INTRODUCTION / SAR DEFINITION 2 3.1 SAR MEASUREMENT SET-UP 3 4.1 E-FIELD PROBE SYSTEM 4 5.1 E-FIELD PROBE CALIBRATION PROCESS 5-6 6.1 PHANTOM, HOLDER, & EQUIVALENT TISSUE 7 7.1 SYSTEM SPECIFICATIONS 8 8.1 MEASUREMENT PROCESS 9 9.1 TEST POSITION OF THE PHONE 10 10.1 BODY SAR TEST SETUP 11 11.1 ANSI/IEEE C95.1 RF EXPOSURE LIMITS 12 12.1 MEASUREMENT UNCERTAINTIES 13 13.1 TEST DATA SUMMARY 14-15 14.1 SAR TEST EQUIPMENT LIST 16 15.1 CONCLUSION 17 16.1 REFERENCES 18 APPENDIX A – PROBE CALIBRATION DATA 19 APPENDIX B – DIPOLE VALIDATION DATA 20 APPENDIX C – SAR TEST PLOTS 21 APPENDIX D – SAR TEST SETUP PHOTOGRAPHS 22 APPENDIX E – EUT PROFILE PHOTOGRAPHS 23 Test Report S/N: SAR.200731387.O6Y SAR Measurement Report Test Dates: July 31, 2000 UTStarcom FCC ID: O6YUTS-702P (Model: UTS 702P) © 2000 PCTEST Lab Single-Mode Single Band PHS Phone (TDMA) 1 SAR MEASUREMENT REPORT 1.1 Scope Environmental evaluation measurements of specific absorption rate 1 (SAR) distributions in simulated human head and body tissues exposed to radiofrequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 2 Company Name: UTStarcom New Jersey R&D Center, 33 Wood Avenue South, 3rd Floor, Address: Iselin, NJ 08830 U.S.A. Attn: Scott E. Black, EMI/Safety Engineer • EUT Type: Single-Mode Single Band TDMA Personal Handyphone Standard (PHS) Phone • Trade Name: UTSTARCOM • Model: UTS 702P • FCC IDENTIFIER: O6YUTS-702P • Tx Frequency: 1893.650 – 1919.150 MHz (TDMA) • Rx Frequency: 1893.650 – 1919.150 MHz (TDMA) • Max. Conducted Power: Software Controlled ALC = B4H; EIRP Not Verified • Application Type: Certification • FCC Classification: Licensed Portable Transmitter Held to Ear (PCE) • Modulation(s): TDMA • FCC Rule Part(s): §2.1093, Docket 96-326 • Dates of Tests: July 31, 2000 Place of Tests: PCTEST Engineering Lab. Columbia, MD, U.S.A. • Report Serial No.: SAR.200731387.O6Y 1 Specific Absorption Rate (SAR) is a measure of the rate of energy absorption due to exposure to an RF transmitting source (wireless portable device). 2 IEEE/ANSI Std. C95.1-1992 limits are used to determine compliance with FCC ET Docket 93-62. Fig. 1 SAR Test Setup Test Report S/N: SAR.200731387.O6Y SAR Measurement Report Test Dates: July 31, 2000 UTStarcom FCC ID: O6YUTS-702P (Model: UTS 702P) © 2000 PCTEST Lab Single-Mode Single Band PHS Phone (TDMA) 2 2.1 INTRODUCTION The FCC has adopted the guidelines for evaluating the environmental effects of radiofrequency radiation in ET Docket 93-62 on Aug. 6, 1996 to protect the public and workers from the potential hazards of RF emissions due to FCC-regulated portable devices.[1] The safety limits used for the environmental evaluation measurements are based on the criteria published by the American National Standards Institute (ANSI) for localized specific absorption rate (SAR) in IEEE/ANSI C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. (c) 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.[2] The measurement procedure described in IEEE/ANSI C95.3-1992 Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave[3] is used for guidance in measuring SAR due to the RF radiation exposure from the Equipment Under Test (EUT). These criteria for SAR evaluation are similar to those recommended by the National Council on Radiation Protection and Measurements (NCRP) in Biological Effects and Exposure Criteria for Radiofrequency Electromagnetic Fields,” NCRP Report No. 86 (c) NCRP, 1986, Bethesda, MD 20814.[4] SAR is a measure of the rate of energy absorption due to exposure to an RF transmitting source. S…

Text truncated - open the document above for the full version.

UTStarcom Personal Station PHS Model:UTS-702/P -- TDMA PHS Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Muscle: σ = 1.85 mho/m ε r = 54.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 3.0 SAR (1g): 0.145 mW/g, SAR (10g): 0.0750 mW/g UTStarcom Personal Station Personal Handyphone Standard (PHS) Phone Single Band Single Mode TDMA PHS Model: UTS-702/P TDMA PHS Mode, Ch.01[1895.150MHz] Conducted Power = ALC Value B4H; Spacing = flat phantom touching phone; no holster/beltclip Test Date = 07-31-2000 SAR Tot [mW/g] 1.09E-2 4.36E-2 7.63E-2 1.09E-1 PCTEST Engineering Laboratory, Inc. UTStarcom Personal Station PHS Model:UTS-702/P -- TDMA PHS Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Muscle: σ = 1.85 mho/m ε r = 54.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 3.0 SAR (1g): 0.149 mW/g, SAR (10g): 0.0771 mW/g UTStarcom Personal Station Personal Handyphone Standard (PHS) Phone Single Band Single Mode TDMA PHS Model: UTS-702/P TDMA PHS Mode, Ch.25 [1902.350MHz] Conducted Power = ALC Value B4H; Spacing = flat phantom touching phone; no holster/beltclip Test Date = 07-31-2000 SAR Tot [mW/g] 9.90E-3 3.96E-2 6.93E-2 9.90E-2 PCTEST Engineering Laboratory, Inc. UTStarcom Personal Station PHS Model:UTS-702/P -- TDMA PHS Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Muscle: σ = 1.85 mho/m ε r = 54.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 3.0 SAR (1g): 0.144 mW/g, SAR (10g): 0.0735 mW/g UTStarcom Personal Station Personal Handyphone Standard (PHS) Phone Single Band Single Mode TDMA PHS Model: UTS-702/P TDMA PHS Mode, Ch.50 [1909.850MHz] Conducted Power = ALC Value B4H; Spacing = flat phantom touching phone; no holster/beltclip Test Date = 07-31-2000 SAR Tot [mW/g] 1.14E-2 4.56E-2 7.98E-2 1.14E-1 PCTEST Engineering Laboratory, Inc.

UTStarcom Personal Station PHS Model:UTS-702/P -- TDMA PHS Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Brain: σ = 1.82 mho/m ε r = 40.4 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 3.0 SAR (1g): 0.0648 mW/g, SAR (10g): 0.0317 mW/g UTStarcom Personal Station Personal Handyphone Standard (PHS) Phone Single Band Single Mode TDMA PHS Model: UTS-702/P TDMA PHS Mode, Ch.01 [1895.150MHz] Conducted Power = ALC Value B4H Test Date = 07-31-2000 SAR Tot [mW/g] 5.20E-3 1.56E-2 2.60E-2 3.64E-2 4.68E-2 PCTEST Engineering Laboratory, Inc. UTStarcom Personal Station PHS Model:UTS-702/P -- TDMA PHS Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Brain: σ = 1.82 mho/m ε r = 40.4 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 3.0 SAR (1g): 0.0509 mW/g, SAR (10g): 0.0275 mW/g UTStarcom Personal Station Personal Handyphone Standard (PHS) Phone Single Band Single Mode TDMA PHS Model: UTS-702/P TDMA PHS Mode, Ch.25 [1902.350MHz] Conducted Power = ALC Value B4H Test Date = 07-31-2000 SAR Tot [mW/g] 4.90E-3 1.47E-2 2.45E-2 3.43E-2 4.41E-2 PCTEST Engineering Laboratory, Inc. UTStarcom Personal Station PHS Model:UTS-702/P -- TDMA PHS Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV5 - SN1370 -- Probe Cal Date 02/00 Med. Parameters 1900 MHz Brain: σ = 1.82 mho/m ε r = 40.4 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 3.0 SAR (1g): 0.0514 mW/g, SAR (10g): 0.0250 mW/g UTStarcom Personal Station Personal Handyphone Standard (PHS) Phone Single Band Single Mode TDMA PHS Model: UTS-702/P TDMA PHS Mode, Ch.50 [1909.850MHz] Conducted Power = ALC Value B4H Test Date = 07-31-2000 SAR Tot [mW/g] 4.50E-3 1.35E-2 2.25E-2 3.15E-2 4.05E-2 PCTEST Engineering Laboratory, Inc.

October 17, 2000 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: O6YUTS-702P 731 Confirmation Number: EA98759 Correspondence Reference Number: 16266 1. The first file submitted to the RF exposure exhibit has nothing other than the letter head; please verify and re-submit. See next page. C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 20 of 31 12 FCC RULES AND REGULATIONS PART 1.1307, 1.1310, 2.1091, 2.1093: RF EXPOSURES COMPLIANCE Please see separate SAR Test Reports. Notes : Body-worn SAR setup The device was tested in the worst-case configuration: shirt pocket position (touching the Body/Phantom). The manufacturer does not specify or sell any belt clip or similar accessory with the device listed in this filing. The UTStarcom UTS-702 meets the FCC RF exposure limits for Uncontrolled/General population environment at any distance from the head (mouth/ear) and body. The conducted output power is a factory setting. The firmware setting ALC=B4H corresponds to a conducted output power of 10 mW Average (80 mW Peak). This unique setting was used for both SAR setups: Head and Body. The reported Head SAR and the Body SAR test results in the attached reports are appropriate for the output power (10 mW Average / 80 mW Peak) for this device. 2. FYI - The SAR exhibits have been broken up into a number files. for future filings, please keep merge files into a single document before uploading. Yes, we will. Thank you. 3. No parts list has been submitted, please upload. See attached file. 4. The external photo indicates a wireless handset but the users manual indicates a wireless local-loop device; please verify discrepancies and submit appropriate info. See attached file. 5. Please clarify the body-worn SAR setup. Was a belt-clip or similar accessory used for testing body-worn SAR? Please include applicable body-worn statements and instructions for users to comply with body- worn SAR. See item 1. for justification. 6. Please verify the conducted output used in the SAR tests. ALC=B4H has been indicated in the SAR report. See item 1. for justification. 7.The reported head SAR are very low, please confirm or verify if the measured SAR values are appropriate for the output power used for this device. The same should be done for the body-worn SAR results. See item 1. for justification.

C OMPANY N AME : UTS TARCOM , I NC . EUT: UTS-702P W ORK O RDER N UMBER : 2000322 FCC ID: O6YUTS-702P Page 31 of 63 20 RECEIVER DATA Temperature: 69°F, Humidity: 72% Emission Frequency (MHz) Test Detector Antenna Polarity (H/V) Turntable Azimuth (deg) Antenna Height (m) Analyzer Reading (d…

Text truncated - open the document above for the full version.