O6ZGFHD100IP-set top BOX

TV Box Important Product Information Guide © 2012 DRAFT v0.1 - CONFIDENTIAL3/30/12 This guide contains safety, handling, disposal, recycling and regulatory information. To avoid injury to people or equipment, carefully read all safety information and operation instructions contained in this guide before using your device. Important Safety and Handling Information Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to the device or other property. LOCATION ● Place the TV Box indoors to avoid exposure to lightning, rain, or sun. Do not place it near a radiator, a heat register, or an open window. ● Maintain at least 4 inches (10 cm) of clearance between the TV Box and any other appliances susceptible to electromagnetic influences, such as a TV or a VCR. However, electronic devices that are not affected by electromagnetic influences can be located closer to the device. ● If you place the TV Box on a rack or a bookcase, make sure that there is adequate ventilation and that you have followed the manufacturer’s instructions for mounting. ● Do not place the TV Box on an unstable surface where it can fall. If the TV Box falls, it can cause serious injury to a person and serious damage to the device. ● If you have a Fat TV Box device, be sure it is not subjected to vibration, which could cause data loss. VENTILATION ● Make sure that the slots on bottom of the TV Box are not blocked. Sufficient airflow around the device is required for proper operation. ● Do not expose the TV Box to an exposed flame. ● Operate the device in a location where the temperature is between 0º and 40 C (32º to 104º F). POWER SUPPLY ● Operate the TV Box using only the type of power supply specified on the label. If you do not know the type of power supplied to your home, contact your local power company. ● Disconnect the power supply before you start any maintenance or installation procedures. ● The TV Box has no on/off switch. To disconnect the device from power, you must disconnect the power cord. Make sure the power cord is always easily accessible. ● When connecting or disconnecting the TV Box , always hold the plug by its sides. Keep fingers away from the metal part of the plug. OVERLOADING ● Make sure that the wall outlet, extension cord, and adapter have a sufficient power rating for the TV Box . If not, this can cause an electric fire shock. CONNECTION TO THE TV © 2012DRAFT v0.1 - CONFIDENTIAL3/30/12 ● Disconnect the power supply before you connect or disconnect the cable from the TV to avoid causing damage to the TV. ATTACHMENTS ● Do not use any unsupported attachments, as these may be hazardous or cause damage to the TV Box . ● Do not move the TV Box if another device, such as a TV, computer, or other electronic device, is connected to it. WATER, LIQUIDS, WET LOCATIONS ● Do not expose the TV Box to rain, liquids, or moisture. ● Do not put any objects filled with liquid, such as vase, on the TV Box . ● Do not use the TV Box outdoors. It is meant for indoor use only. LIGHTNING, STORM, OR NOT IN USE ● During a thunderstorm or when left unattended and unused for long periods of time, unplug the TV Box from the wall outlet and disconnect the antenna. This prevents damage to the device from lightning and power surges. CLEANING ● Disconnect the TV Box from the wall outlet before you clean it. ● Use a moist cloth to clean the TV Box . Do not use solvents. EXTRANEOUS OBJECTS ● Do not insert anything through the openings in the TV Box , where they can touch dangerous voltage points or damage parts. REPLACEMENT OF PARTS ● When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitution can result in damage to the TV Box . Repairing or Modifying the Device Do not attempt to open the TV Box or disassemble it. Opening the device can cause electric shock and voids the limited warranty. No user-serviceable parts are inside. Service should be provided by an authorized service provider only. If the TV Box has been in contact with liquids, punctured, or subjected to a severe fall, unplug it and have it checked out by an authorized service provider before using it. Handling The TV Box can be damaged by improper storage or handling. Be careful not to drop the device when transporting it. © 2012DRAFT v0.1 - CONFIDENTIAL3/30/12 Choking Hazard The TV Box contains small parts, which could present a choking hazard to small children. Keep the TV Box and its accessories away from small children. Connectors and Ports Never force a connector into a port. Check for obstructions on the port. If the connector and port do not join with reasonable ease, they probably do not match. Make sure that the connector matches the port and that you position the connector correctly before inserting it into the port. Exposure to Radio Frequency Energy The TV Box contains radio transmitters and receivers. When the device is on, it sends and receives radio frequency (RF) energy through its antenna. The device is designed, tested 1 , and manufactured to comply with the limits for exposure to RF energy set by the Federal Communications Commission (FCC) of the United States. If you are concerned about exposure to RF energy, you can further limit your exposure by turning off the Wi-fi and Bluetooth functions. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Additional Information For more information from the FCC about exposure to RF energy, go to www.fcc.gov/oet/ rfsafety. The FCC and the U.S. Food and Drug Administration (FDA) also maintain a consumer website at www.fda.gov/RadiationEmittingProducts/RadiationEmittingProductsandProcedures/ HomeBusinessandEntertainment/CellPhones/default.htm to address inquiries about the safety of mobile phones. Please check the website periodically fo…

Text truncated - open the document above for the full version.

HUMAX Co., Ltd. Date: May 22, 2012 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Lab Manager Charles. Kim (or Feel. Jeong) and of SGS Korea Co., Ltdand hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Charles. Kim (or Feel. Jeong) of SGS Korea Co., Ltdon our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute andnot make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k)document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jaeho Lee/Manager HUMAX Co., Ltd.

HUMAX Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: O6ZGFHD100 Pursuant toSections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: 1. Block Diagram 2. Operational Descriptions 3. Schematics 4. External photos 5. Internal photos 6. Test-Setup photos 7. User’s Manual We are also hereby request Short­Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04­1705. This provision will give Humax Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The above material contains trade secrets or technical data, which wouldcustomarily be guarded fromcompetitors. We do not want these documents tobe accessible tothe general public. Sincerely, Jaeho Lee / Manager HUMAX Co., Ltd.

External photos of EUT

The label is located here. o|thGj–USGs›‹U sˆ‰Œ“GMGs–Šˆ›–•

Internal photos of EUT Inner view of EUT Top view of Main PCB Bottom view of Main PCB Top view of WLAN and BT module Bottom view of WLAN and BT module Top view of WLAN and BT antenna Bluetooth WLAN Aux (Ant1) WLAN Main (Ant0)

Report Number : F690501/RF-RTL005569-1 Page: 2 of 11 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd.8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea INDEX TABLE OF CONTENTS Page 1. General Information --------------------------------------------------------------------- 3 2. Test result ----------------------------------------------------------------------------------- 5 Report Number : F690501/RF-RTL005569-1 Page: 3 of 11 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd.8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1. General information 1.1. Testing laboratory SGS Korea Co., Ltd.(Gunpo Laboratory) -705, Dongchun-Dong Sooji-Gu, Yongin-Shi, Kyungki-Do, South Korea. -Wireless Div. 2FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 www.ee.sgs.com/korea Phone No. : +82 31 428 5700 Fax No. : +82 31 427 2371 1.2 Details of applicant Applicant : HUMAX CO., Ltd. Address :HUMAX Village, 11-4, Sunae-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-875, Korea Contact Person : Im, Byung-Suk Phone No. : +82 31 776 6341 1.3 Description of EUT Kind of Product IP-set top BOX Model Name GFHD100 Serial Number N/A Power Supply AC 110 V Frequency Range 2 402 ໬ ~ 2 480 ໬ (BT, BT LE), 2 412 ໬ ~ 2 462 ໬ (11b/g/n_HT20), 2 422 ໬ ~ 2 452 ໬ (11n_HT40), 5 745 ໬ ~ 5 825 ໬ (11a/n_HT20), 5 755 ໬ ~ 5 795 ໬ (11n_HT40), 5 180 ໬ ~ 5 240 ໬ (11a/n_ HT20 – Non DFS), 5 190 ໬ ~ 5 230 ໬ (11n_ HT40 – Non DFS) Modulation Technique DSSS, OFDM Number of Channels 79 channel(BT), 40 channel(BT LE), 11 channel(11b/g/n_HT20), 7 channel(11n_HT40), 5 channel(11a/n_HT20), 2 channel(11n_HT40), 4 channel(11a/n_HT20 – Non DFS), 2 channel(11n_HT40 – Non DFS) Antenna Type Fixed type (2 Tx / 2 Rx) Antenna Gain WLAN ANT0 2 412 ໬ ~ 2 462 ໬: 3.42 ໒i, 5 745 ໬ ~ 5 825 ໬: 4.94 ໒i, 5 180 ໬ ~ 5 240 ໬: 4.71 ໒i ANT1 2 412 ໬ ~ 2 462 ໬: 4.40 ໒i, 5 745 ໬ ~ 5 825 ໬: 5.20 ໒i, 5 180 ໬ ~ 5 240 ໬: 4.13 ໒i Bluetooth 2 402 ໬ ~ 2 480 ໬: 4.40 ໒i (Same to ANT1 of WLAN) 1.4. Declaration by the manufacturer - EUT does not use 11b of ANT1 port. Report Number : F690501/RF-RTL005569-1 Page: 4 of 11 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd.8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 1.5. Test Report Revision RevisionReport number Description 0 F690501/RF-RTL005569 Initial 1 F690501/RF-RTL005569-1 Modify FCC ID Report Number : F690501/RF-RTL005569-1 Page: 5 of 11 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd.8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 2. RF Exposure Evaluation 2.1 Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(b), 1.1310 According to FCC 1.1310 : The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in §1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) 2.1.1. Friis transmission formula: Pd = (Pout*G)/(4*pi*R 2 ) Where Pd = power density in ໧/່ Pout = output power to antenna in ໧ G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in ໅ Pd the limit of MPE, 1 ໧/່. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Frequency Range (໬) Electric Field Strength(V/m) Magnetic Field Strength (A/m) Power Density (໧/່) Average Time (A) Limits for Occupational /Control Exposures 300 – 1 500 -- -- F/300 6 1 500 – 100 000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300 – 1 500 -- -- F/1500 30 1 500 – 100 000 -- -- 1 30 Report Number : F690501/RF-RTL005569-1 Page: 6 of 11 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Testing Korea Co., Ltd.8-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371 www.ee.sgs.com/korea 2.1.2. Test Result of RF Exposure Evaluation Test Item Κ RF Exposure Evaluation Data Test Mode Κ Normal Operation 2.1.3.Output Power into Antenna & RF Exposure Evaluation Distance -Operation mode: WLAN Operation ModeG AntennaGChannelG Channel Frequency (໬)G Output Average Power to Antenna (໒m) Duty Cycle (%) Antenna Gain (໒i) Power Density at 20с (໧/່) 11bG ANT0G LowG2 412G8.49 100 3.42 0.003 088 MiddleG2 437G8.18 100 3.42 0.002 876 HighG2 462G8.10 100 3.42 0.002 823 ANT1G LowG2 412G Not Support MiddleG2 437G HighG2 462G 11gG ANT0G LowG2 412G9.01 100 3.42 0.003 481 MiddleG2 437G8.71 100 3.42 0.003 249 HighG2 462G8.69 100 3.42 0.003 234 ANT1G LowG2 412G8.65 100 4.40 0.004 015 MiddleG2 437G8.42 100 4.40 0.003 808 HighG2 462G8.06 100 4.40 0.003 505 11n_HT20G ANT0G LowG2 412G9.05 100 3.42 0.003 513 MiddleG2 437G8.75 100 3.42 0.003 279 HighG2 462G8.88 100 3.42 0.003 379 ANT1G LowG2 412G8.75 100 4.40 0.004 109 MiddleG2 437G8.23 100 4.40 0.003 645 HighG2 462G8.21 100 4.40 0.003 629 ANT0+ANT1 (Calcula…

Text truncated - open the document above for the full version.

Report Number : F690501/RF-RTL005568-2 Page: 2 of 68 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea Table of contents 1. General information ------------------------------------------------------------------------------------- 3 2. Transmitter radiated spurious emissions and conducted spurious emission ------ 7 3. 26 dB Bandwidth ----------------------------------------------------------------------------------------- 25 4. Output power ---------------------------------------------------------------------------------------------- 37 5. Peak power spectral density ------------------------------------------------------------------------- 50 6. Peak excursion -------------------------------------------------------------------------------------------- 62 7. Transmitter AC Power Line Conducted Emission----------------------------------------------64 Report Number : F690501/RF-RTL005568-2 Page: 3 of 68 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1. General information 1.1. Testing laboratory SGS Korea Co., Ltd.(Gunpo Laboratory) -705, Dongchun-Dong Sooji-Gu, Yongin-Shi, Kyungki-Do, South Korea. -Wireless Div. 2FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 www.ee.sgs.com/korea Phone No. : +82 31 428 5700 Fax No. : +82 31 427 2371 1.2 Details of applicant Applicant : HUMAX CO., Ltd. Address :HUMAX Village, 11-4, Sunae-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-875, Korea Contact Person : Im, Byung-Suk Phone No. : +82 31 776 6341 1.3 Description of EUT Kind of Product IP-set top BOX Model Name GFHD100 Serial Number N/A Power Supply AC 110 V Frequency Range 2 402 ໬ ~ 2 480 ໬ (BT, BT LE), 2 412 ໬ ~ 2 462 ໬ (11b/g/n_HT20), 2 422 ໬ ~ 2 452 ໬ (11n_HT40), 5 745 ໬ ~ 5 825 ໬ (11a/n_HT20), 5 755 ໬ ~ 5 795 ໬ (11n_HT40), 5 180 ໬ ~ 5 240 ໬ (11a/n_ HT20 – Non DFS), 5 190 ໬ ~ 5 230 ໬ (11n_ HT40 – Non DFS) Modulation Technique DSSS, OFDM Number of Channels 79 channel(BT), 40 channel(BT LE), 11 channel(11b/g/n_HT20), 7 channel(11n_HT40), 5 channel(11a/n_HT20), 2 channel(11n_HT40), 4 channel(11a/n_HT20 – Non DFS), 2 channel(11n_HT40 – Non DFS) Antenna Type Fixed type (2 Tx / 2 Rx) Antenna Gain WLAN ANT0 2 412 ໬ ~ 2 462 ໬: 3.42 ໒i, 5 745 ໬ ~ 5 825 ໬: 4.94 ໒i, 5 180 ໬ ~ 5 240 ໬: 4.71 ໒i ANT1 2 412 ໬ ~ 2 462 ໬: 4.40 ໒i, 5 745 ໬ ~ 5 825 ໬: 5.20 ໒i, 5 180 ໬ ~ 5 240 ໬: 4.13 ໒i Bluetooth 2 402 ໬ ~ 2 480 ໬: 4.40 ໒i (Same to ANT1 of WLAN) 1.4. Declaration by the manufacturer ǦEUT is a Master unused DFS channel and EUT does not support 11b of ANT1 port. - Duty Cycle • 98 percent. Report Number : F690501/RF-RTL005568-2 Page: 4 of 68 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1.5. Test equipment list Equipment Manufacturer Model S/NCal Date Cal Interval Cal Due. Signal Generator R&S SMR40 100272 Jul. 15, 2011 Annual Jul. 15, 2012 Spectrum Analyzer Agilent N9030A US51350132 Oct. 28, 2011 Annual Oct. 28, 2012 Spectrum Analyzer Agilent E4440A MY43362142 Mar. 29, 2012 Annual Mar. 29, 2013 Attenuator Mini-Circuits BW-N20W5+ 0950-1 Mar. 30, 2012 Annual Mar. 30, 2013 Low Pass Filter Mini-Circuits NLP-1200+ V8979400903-1Jul. 11, 2011 Annual Jul. 11, 2012 High Pass Filter Wainwright WHK3.0/18G-10SS 344 Jul. 07, 2011 Annual Jul. 07, 2012 High Pass Filter Wainwright WHK6.0/18G-10SS 11 Jul. 07, 2011 Annual Jul. 07, 2012 DC Power Supply Agilent U8002A MY50020026Mar. 29, 2012 Annual Mar. 29, 2013 Preamplifier H.P. 8447F 2944A03909 Jul. 04, 2011 Annual Jul. 04, 2012 Preamplifier R&S SCU18 10117 Jan. 12, 2012 Annual Jan. 12, 2013 Preamplifier MITEQ Inc. JS44-18004000-35-8P1546891 Jul. 04, 2011 Annual Jul. 04, 2012 Test Receiver R&S ESU26 100109 Feb. 21, 2012 Annual Feb. 21, 2013 Bilog Antenna SCHWARZBECK MESSELEKTRONIK VULB9163 396 May. 12, 2011 Biennial May. 12, 2013 Horn Antenna R&S HF906 100326 Nov. 23, 2010 Biennial Nov. 23, 2012 Horn Antenna SCHWARZBECK MESSELEKTRONIK BBHA9170 BBHA9170223Jun. 30, 2010 Biennial Jun. 30, 2012 Antenna Master INNCO MM4000 N/A N.C.R. N/A N.C.R. Turn Table INNCO DS 1200S N/A N.C.R. N/A N.C.R. Anechoic Chamber SY Corporation L × W × H (6.5 m × 3.5 m × 3.5 m) N/A N.C.R. N/A N.C.R. EMI Test Receiver R&S ESHSI0 863365/018 Jul. 07, 2011 Annual Jul. 07, 2012 Two-Line V-Network R&S ENV216 100190 Jan. 09, 2011 Biennial Jan. 09, 2013 Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.4 m) N/A N.C.R. N/A N.C.R. ඖ Support equipment DescriptionManufacturerModelSerial Number N/A - - - Report Number : F690501/RF-RTL005568-2 Page: 5 of 68 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1.6. Summary of test result The EUT has been tested according to the following specifications: APPLIED STANDARD:FCC Part15 Section in FCC 15 Test ItemResult 15.205(a) 15.209(a) 15.407(b)(1) 15.407(b)(2) 15.407(b)(3) Transmitter radiated spurious emissions and Conducted s…

Text truncated - open the document above for the full version.

Test setup photos of EUT A. Photo of Radiated output power & Spurious Emission Test (WLAN) B. Photo of Radiated output power & Spurious Emission Test (BT) C. Photo of Radiated output power & Spurious Emission Test (BT LE)