O7X-WAVE2Low Powered Transceiver

WaveStation For PlayStation 2, PlayStation, & PSone Instruction Manual WaveStation Features • Wireless docking station with RF • (Radio frequency) 900 MHz Technology • Compatible with all PlayStation 2 / PSone (and Original PlayStation) controllers • WaveStation is also compatible with PlayStation 2’s Analog Touch and Dual Shock Technologies • Up to 50 feet of freedom • 50 hours of battery life with 4 C batteries (not included) • Optional 6 volt AC adapter (not included) WaveStation Receiving Unit Layout Rubber Spacer Connects to PS2 or PSone Signal LED The Signal LED indicates signal Strength. A consistent flicker indicates a strong signal Solid LED Flashing LED P2 LED Controller 2 has connectivity Controller 2 has no connectivity P1 LED Controller 1 has connectivity Controller 1has no connectivity P2 LED P1 LED Signal LED WaveStation Docking Unit Layout P1 / P2 LED have a simple function. They flash when there are no peripherals plugged in or when the peripheral in not recognized. They remain ON when a recognized peripheral is plugged into controller port 1 or 2. The Signal LED indicates valid received rumble data from the Game Console to the Docking Unit. A solid LED indicates valid rumble data received from the game console. If the LED flashes quickly, it indicates that rumble data did not make it to the controller. This is not serious as rumble data is updated many times per second. If the LED remains OFF for a long period of time then rumble update is being reduced. This could be due to range limitations or RF noise on the channel being used. Controller Port 1 Controller Port 2 Rumble Function On/Off Switch. Off Position Powers down the WaveStation P1 LED P2 LED Signal LED PS2 / PS1 Switch for Players 1 & 2 NEGCON On/Off Switch For Players 1 & 2 6 volt AC Adapter input Thank you for purchasing the WaveStation Instruction for operation 1. Make sure the power is turned off on your PlayStation® 2 or PSone® and insert the WaveStation Receiving Unit into both controller ports When using PSone® or original PlayStation® game system, remove the rubber spacer on the Receiving Unit, slide the Controller port 2 on the Receiving Unit right, and place the rubber spacer in the space between the two controller ports. 2. Insert 4 C batteries (not included) into the WaveStation Docking Unit 3. Plug controller(s) into the controller port of the WaveStation Docking Unit 4. Adjust controller switches to match the controllers standards 5. Turn on the WaveStation via the on/off switch on the docking unit. You are now ready to enjoy the wireless freedom of WaveStation NEGCON Controller On Off NEGCON Switch PS2 / PS1 PS1 Controller Off PS1 PS2 Controller Off PS2 Rubber Spacer Controller port 2 Controller port 1 WaveStation Advance User Instructions WaveStation has the ability to use 6 different channels to ensure there is no signal interference. NOTE: Leave these settings set to the factory settings unless you are experiencing signal interference. There is a channel selector on the bottom of the Receiving Unit and inside the battery compartment of the Docking Unit. If the channels are changed they must be the same on both units. DIP Switch Channel Settings Channel 1 – Only DIP switch 2 ON Channel 2 – Only DIP switch 3 ON Channel 3 – Only DIP switch 4 ON Channel 4 – Only DIP switch 1 ON Channel 5 – DIP switches 1 & 3 ON Channel 6 – DIP switches 1 & 4 ON (Note: Only 1 of the DIP switches 2,3,4 can ever be ON at any one time.) Troubleshooting If you are experiencing a weak signal first check your batteries, if it continues change the channel on both WaveStation units. If WaveStation is not functioning properly confirm the Receiver unit is plugged in and the controller(s) are properly connected to the Docking Unit. For technical questions please visit http://www.pelicanacc.com or call us directly at 1-800-331-3844 Changes or modifications not expressly approved by the manufacture could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. LIMITED WARRANTY Pelican Accessories warrants to the original consumer purchaser that the product will be free from defects in materials and / or workmanship for a period of 120 days from the date of purchase. If a defect covered by this warranty occurs during this period, Pelican Accessories at its option will repair or replace, at no charge, any part that Pelican Accessories determines to be defective. To obtain warranty service during the warranty period, send the defective product postage pre-paid, with a money order for $4.00 to cover the return postage and handling, along with proof of purchase and the date of purchase to: PELICAN ACCESSORIES 1840 East 27th Street Vernon, CA 90058 This warranty shall not apply if the product has been damaged by abuse, misuses, negligence, accident, modification, tampering or by any other causes unrelated to defective materials and / or workmanship. Repair or replacement as provided under this warranty is Pelican Accessories' exclusive prerogative. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY AND F ITNESS FOR A PARTICULAR PURPOSE ARE HERBY LIMITED TO 120 DAYS FROM THE DATE OF PURCHASE AN ARE SUBJECT TO THE CONDITIONS SET FORTH IN THIS LIMITED WARRANTY. IN NO EVENT SHALL PELICAN ACCESSORIES OR INCIDENTAL DAMAGES RESULT FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights, and you may also have other legal rights, which vary from state to state. Pelican and its logo are registered trademarks. Sony is a registered trademark of Sony Corp. PlayStation 2, PlayStation, & PSone are registered trademarks of Sony Computer Entertainment Inc.

Request for Confidentiality 7-16-02 American Telecommunications Certification Body, Inc 6731 Whittier Avenue Suite C110 Mclean, VA 22101 RE: Certification Application For WaveStation PL-621 FCC ID # 07X-WAVE2 Please be advised that the following information is to be held confidential and behalf of Pelican Accessories. • Schematics • Parts List • Theory of Operation The application contains technical information which Pelican Accessories deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thanks for you attention to this matter. Jason Biheller Product Manager Pelican Accessories 1840 East 27 th Street Vernon, Ca 90058

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 August 21, 2002 RE: FCC ID: 07X-WAVE2 Attention: Greg Snyder I have a few comments on this Application. 1The antenna used during testing on June 24 and 25 th was out of calibration as of June 13. Please provide a corrected report using a calibrated antenna. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

August 21, 2002 RE: FCC ID: 07X-WAVE2 Dear Mr. Ward, Following is the response to your comment(s) of August 21, 2002, referencing the above mentioned application. 1. The antenna used during testing on June 24 and 25 th was out of calibration as of June 13. Please provide a corrected report using a calibrated antenna. R: The antenna listed on Table 2 of the Test Report was calibrated on June 18, 2002. The incorrect date listed in the test report was inadvertently left from a previous report. Attached is a scan of the current calibration certificate. Please let us know if you need a revised test report. Thank you, Gregory M. Snyder Wireless/Telco Services Manager Washington Laboratories, Ltd.

Top and Front View Top and Port View Bottom View Front View Detail

FCC Label And Location This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Cover Removed Removed From Housing PCBs Top View Main PCB without Radio Module and Port Connector PCB Bottom View Radio Module Top Radio Module Bottom

Document 7144-01, Rev. 0 FCC ID: 07X-WAVE1 FCC Certification Test Report Washington Laboratories, Ltd June 2002 FCC Certification Test Report for Pelican Accessories Wavestation Receiving Unit FCC ID: O7X-WAVE2 July 31, 2002 Prepared for: Pelican Accessories 1840 East 27th Street Vernon, CA 90058 Prepared By: Washington Laboratories, Ltd. 7560 Lindbergh Drive Gaithersburg, Maryland 20879 FCC Certification Test Report Document 7144-01, Rev. 0 FCC ID: 07X-WAVE1 FCC Certification Test Report Washington Laboratories, Ltd June 2002 FCC Certification Test Program FCC Certification Test Report for the Pelican Accessories Wavestation Receiving Unit O7X-WAVE2 July 31, 2002 WLL JOB# 7161 Prepared by: Brian J. Dettling Documentation Specialist Reviewed by: Gregory M. Snyder Chief EMC Engineer Document 7144-01, Rev. 0 FCC ID: 07X-WAVE1 FCC Certification Test Report Washington Laboratories, Ltd June 2002 ii Abstract This report has been prepared on behalf of Pelican Accessories to support the attached Application for Equipment Authorization. The test report and application are submitted for an Intentional Radiator under Part 15.249 of the FCC Rules and Regulations. This Federal Communication Commission (FCC) Certification Test Report documents the test configuration and test results for a Pelican Accessories Wavestation Receiving Unit. Note that although this unit is called the “receiving unit” it contains a transmitter which transmits data to the PL-621 Docking Unit (FCC ID: O7X-WAVE1) Testing was performed on an Open Area Test Site (OATS) of Washington Laboratories, Ltd, 7560 Lindbergh Drive, Gaithersburg, MD 20879. Site description and site attenuation data have been placed on file with the FCC's Sampling and Measurements Branch at the FCC laboratory in Columbia, MD. Washington Laboratories, Ltd. has been accepted by the FCC and approved by NIST NVLAP (NVLAP Lab Code: 200066-0) as an independent FCC test laboratory. The Pelican Accessories Wavestation Receiving Unit complies with the limits for a Intentional Radiator device under Part 15.249 of the FCC Rules and Regulations. Document 7144-01, Rev. 0 FCC ID: 07X-WAVE1 FCC Certification Test Report Washington Laboratories, Ltd June 2002 iii Table of Contents Abstract......................................................................................................ii 1 Introduction...................................................................................................................1 1.1 Compliance Statement............................................................................................1 1.2 Test Scope............................................................................................................1 1.3 Contract Information..............................................................................................1 1.4 Test Dates.............................................................................................................1 1.5 Test and Support Personnel....................................................................................1 1.6 Abbreviations.........................................................................................................2 2 Equipment Under Test....................................................................................................3 2.1 EUT Identification & Description............................................................................3 2.2 Test Configuration..................................................................................................3 2.3 Testing Algorithm...................................................................................................3 2.4 Test Location.........................................................................................................3 2.5 Measurements........................................................................................................4 2.5.1 References.....................................................................................................4 2.6 Measurement Uncertainty.......................................................................................4 3 Test Equipment..............................................................................................................5 4 Test Results...................................................................................................................6 4.1 Occupied Bandwidth: (FCC Part §2.1049)............................................................6 4.2 Radiated Spurious Emissions: (FCC Part §15.249)...............................................10 4.2.1 Test Procedure..........................................................................................10 4.3 Conducted Emissions (AC Powerline)..................................................................18 Document 7144-01, Rev. 0 FCC ID: 07X-WAVE1 FCC Certification Test Report Washington Laboratories, Ltd June 2002 iv List of Tables Table 1. Device Summary....................................................................................................3 Table 2: Test Equipment List...............................................................................................5 Table 3. Occupied Bandwidth Results..................................Error! Bookmark not defined. Table 4. Radiated Emissions Limits.....................................................................................10 Table 5: Radiated Emission Test Data (§15.249), Low Channel.........................................12 Table 6: Radiated Emission Test Data (§15.249), Middle Channel.....................................14 Table 7: Radiated Emission Test Data (§15.249), High Channel.........................................16 Table 8: AC Power Line Conducted Emissions Test Data Sheet..................................19 List of Figures Figure 1. Occupied Bandwidth, Low Channel.......................................................................7 Figure 2. Oc…

Text truncated - open the document above for the full version.

Radiated Emissions Test Setup Conducted Emissions Test Setup