O89BR1XBAR CODE SCANNER

BR1X SCANNER USER MANUAL Pinnacle Technology Corp. CONTENT 1. Distinguish BT/2.4G/Wired Model ................................................................................................................ 1 1.1 Side View ................................................................................................................................................ 1 1.2 Nameplate ............................................................................................................................................... 2 2. Charge ............................................................................................................................................................ 2 2.1 Wireless Model (BT/2.4G) ...................................................................................................................... 2 2.2 Wired Model ........................................................................................................................................... 2 3. Configuration ................................................................................................................................................. 3 3.1 Wired Connection ................................................................................................................................... 3 3.2 Wireless Pairing ...................................................................................................................................... 3 3.3 Continuous reading ................................................................................................................................. 4 1 1. Distinguish BT/2.4G/Wired Model 1.1 Side View Wireless Model (BT/2.4G): Wired Model: 2 1.2 Nameplate Wired Model: Bluetooth: 2.4G: 2.Charge Only the wireless model (BT/2.4G) BR1 needs to be charged, the wired model BR1 doesn’t needs to be charged. 2.1 Wireless Model (BT/2.4G) Place the wireless model (BT/2.4G) BR1 on the charging base, LED indicator lightens: ①Orange light slow flash indicates that the BR1 is charging. ②Orange light keeps on indicates charging full. 2.2 Wired Model Connect the wired model BR1 to PC with USB communication cable and then the ‘Status’ light flashes one time and sounds ‘Bi’. N: Wired Model B: Bluetooth W: 2.4G 3 3. Configuration 3.1 Wired Connection After connecting the wired model BR1 to PC with USB communication cable, scanning operation can be carried out. 3.2 Wireless Pairing (1)2.4G Communication Model: ①Connect charging base and PC with communication cable. ②Scan ‘2.4G/Bluetooth Mode Select’ code underneath the charging base; While the scanner sounds ‘Bi’, it indicates that the scanner is in 2.4G Mode. ③Unplug the communication cable. ④Scanner reads "Pairing code" or "Pairing" code underneath the charging base to pair, and keep the distance between scanner and charging base at most 20cm. ⑤Plug the communication cable back to PC . （2）Bluetooth Communication Model: ①Connect charging base and PC with communication cable. ②Scan ‘2.4G/Bluetooth Mode Select’ code underneath the charging base; While the scanner sounds ‘Bi Bi’, it indicates that the scanner is in Bluetooth Mode. ③Unplug the communication cable. ④Scanner reads "Pairing code" or "Pairing" code underneath the charging base to pair, and keep the distance between scanner and charging base at most 20cm. ⑤Plug the communication cable back to PC. Pairing code 2.4G/Bluetooth Mode Select 2.4G/Bluetooth Mode Select Pairing code Note: Step ③and ④ are necessary when the scanner had been paired and user would like to pair the scanner with another bluetooth. 4 3.3 Continuous reading Scan ‘Continuous reading’ code, and then press the trigger key to read barcode, after that the scanner can continuously read barcode without pressing the trigger key. Continuous reading This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Xiamen Pinnacle Electrical Co.,Ltd. Agent Authorization Letter 2020-12-17 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Lingbin Zeng Position: Manager Company Name: Xiamen Pinnacle Electrical Co., Ltd. Address: 4F, Guang Xia Building, Torch High-Tech Zone, Xiamen, China Tel / Fax 86-592-5710085/ 86-592-5710029 E-Mail: [email protected]

Xiamen Pinnacle Electrical Co.,Ltd. Long Term Confidentiality Request Letter 2020-12-17 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (FCC ID: O89BR1X) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - e.g. Block diagram - e.g. SCH - e.g. Operational Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name: Lingbin Zeng Position: Manager Company Name: Xiamen Pinnacle Electrical Co., Ltd. Address: 4F, Guang Xia Building, Torch High-Tech Zone, Xiamen, China Tel / Fax 86-592-5710085/ 86-592-5710029 E-Mail: [email protected]

Model difference letter 2020,12,17 Dear MET Reviewer, This is a new Application from Xiamen Pinnacle Electrical Co.,Ltd. Model No.: BR1X,BR2X,BR3X,BR4X,BR5X,BR6X,BR7X,BR8X, BRX Only the model BR1X was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Thank you for your cooperation! Yours sincerely, Signatory: Name: Lingbin Zeng Position: Manager Company Name: Xiamen Pinnacle Electrical Co., Ltd. Address: 4F, Guang Xia Building, Torch High-Tech Zone, Xiamen, China Tel / Fax 86-592-5710085/ 86-592-5710029 E-Mail: [email protected]

FCC ID: O89BR1X Model No.: BR1X FCC ID: O89BR1X FCC ID: O89BR1X

FCC ID: O89BR1X Model No.: BR1X

FCC ID: O89BR1X BT&2.4G ANT FCC ID: O89BR1X FCC ID: O89BR1X FCC ID: O89BR1X

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website:www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: Applicant: Address of Applicant: CQASZ20200901100E-03 Xiamen Pinnacle Electrical Co.,Ltd. 4F, Guang Xia Building, Torch High-Tech Zone, Xiamen, China Equipment Under Test (EUT): Product: BAR CODE SCANNER Model No.: BR1X,BR2X,BR3X,BR4X,BR5X,BR6X,BR7X,BR8X, BRX Test Model No.: BR1X Brand Name: ACLAS FCC ID: O89BR1X Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-11-16 Date of Test: 2020-11-16 to 2020-12-09 Date of Issue: 2020-12-10 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tiny You ) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-03 Page:2 of 8 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200901100E-03 Rev.01 Initial report 2020-12-10 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-03 Page:3 of 8 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION .......................................................................................................................................4 3.1 CLIENT INFORMATION ................................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................4 3.3 GENERAL DESCRIPTION OF BLE ................................................................................................................................4 3.4 GENERAL DESCRIPTION OF 2.4G ................................................................................................................................4 4 SAR EVALUATION ....................................................................................................................................................6 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................6 4.1.1 Standard Requirement .................................................................................................................................6 4.1.2 Limits ..............................................................................................................................................................6 4.1.3 EUT RF Exposure .........................................................................................................................................7 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-03 Page:4 of 8 3 General Information 3.1 Client Information Applicant: Xiamen Pinnacle Electrical Co.,Ltd. Address of Applicant: 4F, Guang Xia Building, Torch High-Tech Zone, Xiamen, China Manufacturer: Xiamen Pinnacle Electrical Co.,Ltd. Pinnacle Technology Corp.(Taiwan) Address of Manufacturer: Guang Xia Building, Torch High-Tech Zone,Xiamen,China NO.270,Nan-Kang RD,Section3,Taipei,Taiwan Factory: Xiamen Pinnacle Electrical Co.,Ltd. Address of Factory: Guang Xia Building, Torch High-Tech Zone, Xiamen NO.1,Fangshannan Road,Xiang’an industrial Zone,Xiamen,China 3.2 General Description of EUT Product Name: BAR CODE SCANNER Model No.: BR1X,BR2X,BR3X,BR4X,BR5X,BR6X,BR7X,BR8X, BRX Test Model No.: BR1X Trade Mark: ACLAS Hardware Version: EPBR1CMB Software Version: V1.001 Test sample SN: BR1M320309505 EUT Power Supply: lithium battery:DC3.7V, Charge by DC5.0V 3.3 General Description of BLE Operation Frequency: 2402MHz~2480MHz Bluetooth Version: V5.0 Modulation Type: GFSK Transfer Rate: 1Mbps, 2Mbps Number of Channel: 40 Product Type: Mobile Portable Fix Location Test Software of EUT: Non_Signaling_Test_Tool (manufacturer declare) Antenna Type: PCB antenna Antenna Gain: 0dBi 3.4 General Description of 2.4G Operation Frequency: 2405MHz~2476MHz Channel Numbers: 16 Type of Modulation: O-QPSK Product Type: Mobile Portable Fix Location Test Software of EUT: Non_Signaling_Test_Tool (manufacturer declare) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-03 Page:5 of 8 Antenna Type: PCB antenna Antenna Gain: 0dBi Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-03 Page:6 of 8 4 SAR Evaluation 4.1 RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 4.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, …

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 Test Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: Applicant: Address of Applicant: CQASZ20200901100E-01 Xiamen Pinnacle Electrical Co.,Ltd. 4F, Guang Xia Building, Torch High-Tech Zone, Xiamen, China Equipment Under Test (EUT): Product: BAR CODE SCANNER Model No.: BR1X,BR2X,BR3X,BR4X,BR5X,BR6X,BR7X,BR8X, BRX Test Model No.: BR1X Brand Name: ACLAS FCC ID: O89BR1X Standards: 47 CFR Part 15, Subpart C Date of Receipt: 2020-11-16 Date of Test: 2020-11-16 to 2020-12-09 Date of Issue: 2020-12-10 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tiny You ) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-01 Page:2 of 53 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200901100E-01 Rev.01 Initial report 2020-12-10 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-01 Page:3 of 53 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2013 PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 2013 N/A Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(3) ANSI C63.10 2013 PASS 6dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(2) ANSI C63.10 2013 PASS Power Spectral Density 47 CFR Part 15, Subpart C Section 15.247 (e) ANSI C63.10 2013 PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS N/A: The EUT powered by DC, So Not Applicable Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-01 Page:4 of 53 3 Contents Page 1 VERSION .................................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 3 3 CONTENTS .............................................................................................................................................................. 4 4 GENERAL INFORMATION ................................................................................................................................... 5 4.1 CLIENT INFORMATION .......................................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 5 4.3 ADDITIONAL INSTRUCTIONS................................................................................................................................. 7 4.4 TEST ENVIRONMENT ............................................................................................................................................ 8 4.5 DESCRIPTION OF SUPPORT UNITS ......................................................................................................................... 8 4.6 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................. 9 4.7 TEST LOCATION ................................................................................................................................................. 10 4.8 TEST FACILITY ................................................................................................................................................... 10 4.9 DEVIATION FROM STANDARDS ........................................................................................................................... 10 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ...................................................................................... 10 4.11 EQUIPMENT LIST ................................................................................................................................................ 11 5 TEST RESULTS AND MEASUREMENT DATA .............................................................................................. 12 5.1 ANTENNA REQUIREMENT ................................................................................................................................... 12 5.2 CONDUCTED PEAK OUTPUT POWER ................................................................................................................... 13 5.3 6DB OCCUPY BANDWIDTH ................................................................................................................................. 17 5.4 POWER SPECTRAL DENSITY ............................................................................................................................... 21 5.5 BAND-EDGE FOR RF CONDUCTED EMISSIONS .................................................................................................... 25 5.6 SPURIOUS RF CONDUCTED EMISSIONS .................................................…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 TEST REPORT The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: Applicant: Address of Applicant: CQASZ20200901100E-02 Xiamen Pinnacle Electrical Co.,Ltd. 4F, Guang Xia Building, Torch High-Tech Zone, Xiamen, China Equipment Under Test (EUT): Product: BAR CODE SCANNER Model No.: BR1X,BR2X,BR3X,BR4X,BR5X,BR6X,BR7X,BR8X, BRX Test Model No.: BR1X Brand Name: ACLAS FCC ID: O89BR1X Standards: 47 CFR Part 15, Subpart C Date of Receipt: 2020-11-16 Date of Test: 2020-11-16 to 2020-12-09 Date of Issue: 2020-12-10 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tiny You ) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-02 Page:2 of 44 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200901100E-02 Rev.01 Initial report 2020-12-10 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-02 Page:3 of 44 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2013 PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 2013 N/A Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(3) ANSI C63.10 2013 PASS 6dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(2) ANSI C63.10 2013 PASS Power Spectral Density 47 CFR Part 15, Subpart C Section 15.247 (e) ANSI C63.10 2013 PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS N/A: The EUT powered by DC, So Not Applicable Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901100E-02 Page:4 of 44 3 Contents Page 1 VERSION .................................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 3 3 CONTENTS .............................................................................................................................................................. 4 4 GENERAL INFORMATION ................................................................................................................................... 5 4.1 CLIENT INFORMATION .......................................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 5 4.3 ADDITIONAL INSTRUCTIONS................................................................................................................................. 7 4.4 TEST ENVIRONMENT ............................................................................................................................................ 8 4.5 DESCRIPTION OF SUPPORT UNITS ......................................................................................................................... 8 4.6 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................. 9 4.7 TEST LOCATION ................................................................................................................................................. 10 4.8 TEST FACILITY ................................................................................................................................................... 10 4.9 DEVIATION FROM STANDARDS ........................................................................................................................... 10 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ...................................................................................... 10 4.11 EQUIPMENT LIST ................................................................................................................................................ 11 5 TEST RESULTS AND MEASUREMENT DATA .............................................................................................. 12 5.1 ANTENNA REQUIREMENT ................................................................................................................................... 12 5.2 CONDUCTED PEAK OUTPUT POWER ................................................................................................................... 13 5.3 6DB OCCUPY BANDWIDTH ................................................................................................................................. 16 5.4 POWER SPECTRAL DENSITY ............................................................................................................................... 19 5.5 BAND-EDGE FOR RF CONDUCTED EMISSIONS .................................................................................................... 22 5.6 SPURIOUS RF CONDUCTED EMISSIONS .................................................…

Text truncated - open the document above for the full version.

FCC ID: O89BR1X 1 Photographs - EUT Test Setup Model No.: BR1X 1.1 Radiated Emission 9kHz~30MHz: 30MHz~1GHz: FCC ID: O89BR1X Above 1GHz: