OAYARS5ASRD for RTTT and other vehicle or fixed installation

ADC Automotive Distance Control Systems GmbH | Peter-Dornier-Straße 10, 88131 Lindau www.continental-corporation.com End user information 2020-12-10 Device description: Advanced Radar Sensor, ARS5-A FCC ID: OAYARS5A The above stated product is manufactured by the grantee (ADC Automotive Distance Control Systems GmbH) and sold as an OEM product. When end-user instructions are required, as is the case with this product, the certification owner must inform the OEM to notify the end-user. ADC Automotive Distance Control Systems GmbH will supply the following information to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information must be included in the end product user’s manual to ensure continued FCC regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual: Advanced Radar Sensor, ARS5-A FCC ID: OAYARS5A Radiofrequency radiation exposure information: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and the body of any persons, user or bystander. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. US FCC Notice: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ARS5-A Exhibit9a –Sample Photos(external) ADAS Business Unitwww.continental-corporation.com External Side View –Left / Right 9 December 2020 2© Continental AG External –front / backside 9 December 2020 3© Continental AG External –Top / botton 9 December 2020 4© Continental AG

Senses for Safety Driver assistance systems help save lives ARS5-A Exhibit 7 –Label Autonomous Mobility and Safety (AMS) | Advanced Driver Assistance Systems ARS5-A Label 2© Continental AG ARS5-A Label Placement 3© Continental AG

ARS5-A Exhibit9b –Sample Photos(internal) ADAS Business Unitwww.continental-corporation.com Internal –RF-Front / LF-Backside 16 December 2020 2© Continental AG Internal LF –Front / Backside 16 December 2020 3© Continental AG Internal Antenna 16 December 2020 4© Continental AG 16 December 2020 5© Continental AG Internal –Housing inside –front and backcover

BNetzA - CAB - 02/21 - 102 TEST REPORT Test report no.: 1-1154/20-01-03 Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. ADC Automotive Distance Control Systems GmbH Peter-Dornier-Str. 10 88131 Lindau/Bodensee / GERMANY Phone: +49 8382 9699 - 0 e-mail: info.automotive.approvals@continental- corporation.com Manufacturer ADC Automotive Distance Control Systems GmbH Peter-Dornier-Str. 10 88131 Lindau / Germany Test standard/s CFR 47 Part 95, Subpart M The 76-81 GHz Band Radar Service CFR 47 Part 2, Subpart J Frequency allocations and radio treaty matters; general rules and regulations For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Advanced Radar Sensor Type: ARS5-A FCC ID: OAYARS5A Frequency: 76.0 – 77.0 GHz Antenna: Integrated 3D antenna (12 Tx, 16 Rx) Power supply: VN = 12.0 V DC (8.5 V – 17.0 V) by external power supply Temperature range: -40°C to +85°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Thomas Vogler Meheza Walla Lab Manager Lab Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-1154/20-01-03 © CTC advanced GmbH Page 2 of 53 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 2.3 Test laboratories sub-contracted ...................................................................................................... 3 3 Test standard/s and references .................................................................................................................... 4 4 Reporting statements of conformity – decision rule .................................................................................. 5 5 Test environment ............................................................................................................................................ 5 6 Test item .......................................................................................................................................................... 6 6.1 General description ............................................................................................................................. 6 6.2 Additional information ........................................................................................................................ 6 7 Description of the test setup ......................................................................................................................... 7 7.1 Shielded semi anechoic chamber ...................................................................................................... 8 7.2 Shielded fully anechoic chamber .................................................................................................... 10 7.3 Radiated measurements > 18 GHz ................................................................................................... 12 7.4 Radiated measurements > 50/85 GHz.............................................................................................. 12 8 Sequence of testing ..................................................................................................................................... 14 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ............................................................... 14 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz .............................................................. 15 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz .............................................................. 16 8.4 Sequence of testing radiated spurious above 18 GHz .................................................................. 17 8.5 Sequence of testing radiated spurious above 50/85 GHz with external mixers ......................... 18 9 Measurement uncertainty ............................................................................................................................ 19 10 Summary of measurement results .......................................................................................................... 20 11 Measurement results ................................................................................................................................ 21 11.1 Radiated power .............................................................................................................................. 21 11.2 Modulation characteristics ........................................................................................................... 27 11.3 Occupied bandwidth ...................................................................................................................... 28 11.4 Field strength of spurious emissions ...................................…

Text truncated - open the document above for the full version.

Annex D 1-1154/20-01-01_AnnexD Setup photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Michael Dorongovski Lab Manager Radio Communications CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1: 1-18 GHz test setup Photo 2 1-18 GHz test setup 2020-12-08Document No. 1-1154/20-01-01_AnnexD2/5 Photo 3 1-18 GHz test setup Photo 4: >18 GHz test setup 2020-12-08Document No. 1-1154/20-01-01_AnnexD3/5 Photo 5: 30 MHz-1 GHz test setup 2020-12-08Document No. 1-1154/20-01-01_AnnexD4/5 Document history VersionApplied changesDate of release initial release2020-12-08 - END OF DOCUMENT - 2020-12-08Document No. 1-1154/20-01-01_AnnexD5/5