ADC Automotive Distance Control Systems GmbH | Peter-Dornier-Straße 10, 88131 Lindau www.continental-corporation.com End user information 2023-08-29 Device description: Advanced Radar Sensor, ARS6-A FCC ID: OAYARS6A The above stated product is manufactured by the grantee (ADC Automotive Distance Control Systems GmbH) and sold as an OEM product. When end-user instructions are required, as is the case with this product, the certification owner must inform the OEM t o notify the end-user. ADC Automotive Distance Control Systems GmbH will supply the following information to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information must be included in the end product user’s manual to ensure continued FCC regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual: Advanced Radar Sensor, ARS6-A FCC ID: OAYARS6A Radiofrequency radiation exposure information: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and the body of any persons, user or bystander. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. US FCC Notice: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Autonomous Mobility

Attestation Statements

@ntinentalS Autonomous Mobility ADC Automotive Distance Confol Systems GmbH, Peter-Dornier-Straße 10,8813'l Lindau, Germany Federal Communication Commission Office of Engineering and Technology Laboratory Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Date:2023-07-28 Attestation Statement according to 2.91 1 (d)(5)(i) and 2.91 1 (dXsXii) FGG lD: OAYARSOA TO WHOM IT MAY CONCERN We hereby certify that the equipment for which authorization is sought is not "covered" equipment prohibited from receiving an equipment authorization pursuant to Section 2.903 of the FCC's rules. Further we certifo that, as of the date of the filing of the application, ADC Automotive Distance Gontrol Systems GmbH is not identified on the Covered List, established pursuant to $1.50002 of the FCC's rules, as an entity producing "covered" communications equipment. Sincerely, Rainer Steck Head of Product Line Radar Thomas Reitmayer Senior Expert Radio Regulaflons & Device Approvals ADC Automotive Distance Control Systems GmbH I P€ter-Dornier-Straße 10,88'131 Lindau M.continental-corporation.com 1t1

External Photos

Annex A No.1-3031/21-01-01 September 13, 2023 DescriptionExternal photographs of EUT This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Meheza Walla Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-3031/21-01-01 Release 1 - Page 1 of 3 Photo 1 Photo 2 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-3031/21-01-01 Release 1 - Page 2 of 3 Photo 3 Photo 4 - END OF DOCUMENT - cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-3031/21-01-01 Release 1 - Page 3 of 3

Internal Photos

Annex B No.1-3031/21-01-01 September 13, 2023 DescriptionInternal photographs of EUT This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Meheza Walla Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-3031/21-01-01 Release 1 - Page 1 of 3 Photo 1 Photo 2 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-3031/21-01-01 Release 1 - Page 2 of 3 Photo 3 Photo 4 - END OF DOCUMENT - cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-3031/21-01-01 Release 1 - Page 3 of 3

RF Exposure Info

© CTC advanced GmbH Page 1 of 2 BNetzA - CAB - 02/21 - 102 RF Exposure Evaluation according to KDB 447498 D01 v06 Report identification number: 1-4592/22-01-08_MPE_FCC Certification numbers and labeling requirements FCC ID OAYARS6A This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Report no.: 1-4592/22-01-08 © CTC advanced GmbH Page 2 of 2 1. MPE at given distance (KDB 447498 D01 General RF Exposure Guidance v06) Equation from page 18 of OET Bulletin 65, Edition 97-01 S = PG / 4π R 2 where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna PG = Output Power including antenna gain The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) 2. EUT technologies Declared minimum safety distance: 20 cm f Min f Max #P ERP P EIRP P RF Exp S Result S Limit % Radio 76 to 77 GHz 7600077000AN/A27.327.30.111.0010.66% Output Power [dBm] SRD Technology Frequency [MHz] Reference Power Density [mW/cm²] Share of Limit Referenced Documents: # Results from: A Test Report 1-4592/22-01-03 3. Conclusion This prediction demonstrates the following: The power density levels for FCC at a distance of 20 cm are below the maximum levels allowed by regulations. Conclusion: RF exposure evaluation is not required.

Test Report

BNetzA - CAB - 02/21 - 102 TEST REPORT Test report no.: 1-4592_22-01-03 Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. ADC Automotive Distance Control Systems GmbH Peter-Dornier-Str. 10 88131 Lindau / GERMANY Phone: 08382 9699 - 0 Contact: Thomas Reitmayer e-mail: Thomas.Reitmayer@continental- corporation.com Manufacturer ADC Automotive Distance Control Systems GmbH Peter-Dornier-Str. 10 88131 Lindau / GERMANY Test standard/s FCC - Title 47 CFR Part 95 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 95 - Personal Radio Services FCC - Title 47 CFR Part 2 Frequency allocations and radio treaty matters; general rules and regulations For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: SRD for RTTT and other vehicle or fixed installation Model name: ARS6-A FCC ID: OAYARS6A Frequency: 76.0 – 77.0 GHz Antenna: Integrated 3D antenna Power supply: 6.5 V to 19.0 V DC by external power supply Temperature range: -40°C to +85°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Thomas Vogler Meheza Walla Lab Manager Lab Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-4592_22-01-03 © CTC advanced GmbH Page 2 of 74 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 General information ................................................................................................................................... 3 2.1 Notes and disclaimer ...................................................................................................................... 3 2.2 Application details .......................................................................................................................... 3 2.3 Test laboratories sub-contracted .................................................................................................... 3 3 Test standard/s, references and accreditations ......................................................................................... 4 4 Reporting statements of conformity – decision rule .................................................................................. 5 5 Test environment ....................................................................................................................................... 6 6 Test item ................................................................................................................................................... 7 6.1 General description ......................................................................................................................... 7 6.2 Additional information .................................................................................................................... 7 7 Description of the test setup ...................................................................................................................... 8 7.1 Shielded semi anechoic chamber .................................................................................................... 9 7.2 Shielded fully anechoic chamber ................................................................................................... 11 7.3 Radiated measurements > 18 GHz ................................................................................................ 13 7.4 Radiated measurements > 50/85 GHz ........................................................................................... 13 8 Sequence of testing ................................................................................................................................. 15 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ............................................................... 15 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ............................................................... 16 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz................................................................ 17 8.4 Sequence of testing radiated spurious above 18 GHz .................................................................... 18 8.5 Sequence of testing radiated spurious above 50/85 GHz with external mixers .............................. 19 9 Measurement uncertainty ........................................................................................................................ 20 10 Far field consideration for measurements above 18 GHz ..................................................................... 20 11 Summary of measurement results ....................................................................................................... 21 11.1 Summary ................................................................................................................................... 21 12 Measurement results ........................................................................................................................... 22 12.1 Radiated power .......................................................................................................................... 22 12.2 Modulation characteristics ..............................................…

Text truncated - open the document above for the full version.

Test Setup Photos

Annex D No.1-4592/22-01-01_Annex_D Setup photos of the equipment under test This document is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Meheza Walla Lab Manager Radio Labs CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photo 1 Photo 2 2023-04-17Document 1-4592/22-01-01_Annex_D2/3 Photo 3 Photo 4 - END OF DOCUMENT - 2023-04-17Document 1-4592/22-01-01_Annex_D3/3