OB6-IGCR46D916COMPACT READER AND POWER SUPLY AND COMMUNICATION

Page 1 of 7 H H i i - - G G - - T T e e k k R R F F I I D D C C o o m m p p a a c c t t R R e e a a d d e e r r I I n n s s t t a a l l l l a a t t i i o o n n G G u u i i d d e e Page 2 of 7 1. Introduction The Compact Reader is a component of Hi-G-Tek’s wireless monitoring system use for outdoor installations. It allows coverage and protection of secured cargoes or assets in large storage yards and ports. The Compact Reader utilizes RFID technology to communicate with the RFID sensors (data tags /seals) over the UHF channel (433 MHz. or 916MHz). It interrogates their ID, status and user data. Correspondingly, each tag/seal reports its unique identification and anti-tamper alarm status in a short beacon transmission over the high-frequency channel. Each reader is able to communicate with a numerous sensors simultaneously, verifying their presence and status, any changes in status are immediately reported. Using an isolated RS-485 interface, multiple readers can be easily networked together into a single controlling computer. This allows enlarging even further the coverage area of the readers while keeping them synchronized within the field of application. The Compact Reader powered from an indoor power supply & comm. unit (PSC unit) that provides both protected power and isolated serial communication lines. Equipped with RS-232 to RS-485 bi-directional serial communication converter, the PSC unit easily forwards any RFID transaction from the Reader (RS-485) to the controlling computer (RS-232) obtaining continually and real-time monitoring. Page 3 of 7 2. Warnings and Cautions • This device required to be connected to a certified power source 24VDC / 14W min.. • To avoid damaging, please follow the installation instructions. ATTENTION • Hi-G-Tek's Compact Reader is distributed to a commercial/industrial use only, and should only be handled by personnel authorized by Hi-G-Tek representatives. • Installation must be performed according to this User Guide. • Using only certified antennas: It is the responsibility of the installer to ensure that when using the outdoor antenna kits in the United States (or where FCC rules apply), only those antennas certified with the product are used. • The use of any antenna other than those certified with the product is expressly forbidden in accordance with FCC rules CFR47 part 15.204 and part 15.203. The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. Instructions concerning human exposure to radio frequency electromagnetic fields: A distance of at least 20cm. between the equipment and all persons should be maintained during the operation of the equipment. Page 4 of 7 3. Installation Instructions 1. Unscrew the front panel screws and carefully dismantle the top cover of the Compact Reader. 2. Insert power * and RS485 communication cable (from PSC unit) through the left cable gland. * 24VDC for IG-CR-46D-XXX, 48VDC for IG-CR-86D-XXX 3. Wire J1(screw-on terminal block) as shown figure1.3 (page.4) 4. Ensure cables are properly wired, tighten the cable glands to obtain optimum sealing. 5. Connect the RS232 communication cable from the PSC unit to the PC (COM port) 6. Switch on the external power supply, observe the Power indicator (on the bottom side of the Reader) - the indicator flashes for approximately 5 seconds and remains illuminated. Top cover screw Cable Glands Page 5 of 7 Figure 1.1: RS232 connection diagram Figure 1.2 : Power connection diagram Figure 1.3: Compact Reader - PSC Unit – RS485 Full duplex interconnection 9 8 7 2 3 5 J10 Compact Reader DB9 Female 1 9 J1 Compact Reader 1 8 24VDC Power Supply +VIN -VIN Compact Reader - J1 PSC Unit 1 2 4 5 6 7 8 1 2 7 3 4 5 6 +VDC Gnd COMM RxA RxB TxA TxB +VDC Gnd COMM TxB TxA RxB RxA Page 6 of 7 Annex 1 Compact Reader pinout J10 DESCRIPTION PIN EXT. IN 1 GND 2 EXT.OUT1 3 EXT.OUT2 4 EXT.OUT3 5 OUTS-GND 6 RS232- GND 7 RS232-RXD 8 RS232-TXD 9 J1 , J2 DESCRIPTION PIN +VIN 1 VIN- 2 SHIELD 3 SIGNAL GND 4 RxA (RS485) 5 RxB (RS485) 6 TxA (RS485) 7 TxB (RS485) 8 Compact Reader board -Top view - Page 7 of 7 Annex 2 Technical spec. RF Characteristics UHF Tx/Rx Channel (Operating Frequency) 916.5 MHz or 433MHz ( different models) Range Up to 100m ( within open space) Interfaces Serial comm. RS232 for administration and isolated RS485 Antenna 50 ohm, whip (supplied) I/O's Isolated 3 Outputs & 1 Input (active low) Power Requirements Power supply type: 24V or 48V powered from PSC Unit. Power Consumption 1W Max Physical Characteristics Dimensions 150x150x80mm (5.9''x5.9"x 3.15" inch) Weight 1580gr (3.4 Lb) Environmental Operating Temperature -40°C to +70°C Storage Temperature -40°C to +80°C Protection Class. IP 65 Standards FCC (for 916 MHz models) part 15C, sub part B- class B, sub part C. CE (for 433 MHz models) EMC /RADIO /SAFETY full compliance. Safety cTUVus…

Text truncated - open the document above for the full version.

July 15, 2007 To whom it may concern, Clarification concerning PSC unit Selling FCC ID: OB6-IGCR46916 1. We hereby declare that the following power supply & communication (PSC) units : • PSC Unit model IG-PS-4RI • PSC Unit model IG-PS-8RI Associated with FCC identifier OB6-IGCR46916 cannot be sold to a customer as a "stand-alone" power supply unit for use with any other device which is not subjected to the above-mentioned FCC identifier. For any doubt, the above products must be sold in conjunction with Compact Reader in accordance with FCC identifier OB6-IGCR46916.

June 12, 2007 Attn: Timco Engineering Inc. To Whom It May Concern, Letter of Authorization We hereby authorize I.T.L. (Product Testing) Ltd (ITL) to act on the behalf of Hi-G-Tek Ltd, regarding the FCC ID Certification Process for the following application: Handheld Data Terminal, Model IG-MA-31, FCC ID: OB6-IGCR46D916

June 12, 2007 Attn: Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: OB6-IGCR46D916 Dear Sir or Ma'am, Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: • IG-CR-46D-916 Confidential Parts List.pdf • IG-CR-46D-916 Confidential Assembly Scheme.pdf • IG-CR-46D-916 Confidential Electrical Scheme.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Hi-G-Tek Ltd. understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application.

Clarification concerning DC/DC converter OB6-IGCR46D916 The indicated item below is a discrete DC/DC converter (it converts the V- input into 5VDC- circuit's VCC level) the item (manufactured by RECOM) is enclosed within a sealed metal case, attached please find datasheet. DC/DC CONVERTER MFQ. BY RECOM 108www.recom-international.comMarch-2006 Selection Guide 3 Watt DIP24 Isolated Dual Output ECONOLINE DC/DC-Converter REC3- DRWI/A Series ●3W DIP Package Isolated Dual Outputs Vout1 / Vout2 ●Input / Output 2KVDC Isolation min. ●UL94V-0 Package Material ●Continuous Short Circuit Protection Auto-Restarting (V1) ●Wide Input 2:1 ●Internal SMD design ●100% Burned In Features Regulated Converters Specifications(Core Operating Area) PartInputOutputOutputOutputOutput NumberVoltageVoltageCurrentVoltageCurrent DIP24(VDC)Vout1(VDC)at Vout1(mA)Vout2(VDC) at Vout2(mA) REC3-050505DRWI/A4.5-95300*5300 REC3-050509DRWI/A4.5-95300*9167 REC3-050512DRWI/A4.5-95300*12125 REC3-050515DRWI/A4.5-95300*15100 REC3-120505DRWI/A9-185300*5300 REC3-120509DRWI/A9-185300*9167 REC3-120512DRWI/A9-185300*12125 REC3-120515DRWI/A9-185300*15100 REC3-240505DRWI/A18-365300*5300 REC3-240509DRWI/A18-365300*9167 REC3-240512DRWI/A18-365300*12125 REC3-240515DRWI/A18-365300*15100 REC3-480505DRWI/A36-725300*5300 REC3-480509DRWI/A36-725300*9167 REC3-480512DRWI/A36-725300*12125 REC3-480515DRWI/A36-725300*15100 * V1 min. load 100mA to supply V2 well * add suffix "M" for Metal Case, e.g.REC3-240505DRWI/AM For alternative custom output voltage and power combinations, please contact Recom Technical Support Input Voltage Range2:1 Output Voltage Accuracy±2% max. Line Voltage Regulation±0.4% max. Load Voltage Regulation (10% to 100% full load )±0.6% max. Output Ripple and Noise (at 20MHz BW)50mVp-p max. Operating Frequency100kHz typ. No Load Power Consumption300mW max. Isolation VoltageInput / Output (tested for 1 second)2000VDC min. Vout1 / Vout2 (tested for 1 second) 500VDC min. Rated Working Voltage(long term isolation)see Application Notes Isolation Capacitance40pF typ. Isolation Resistance 1 GΩmin. Short Circuit Protection (V1)Continuous Operating Temperature RangeVin=5V-40°C to +80°C (see Graph) (free air convection)Vin=12, 24, 48V-40°C to +85°C (see Graph) Storage Temperature Range-50°C to +125°C continued on next page EN-60950-1 Certified EN-60601-1 Pending www.recom-international.com109March-2006 Specifications(Core Operating Area) REC3-DRWI/A Series ECONOLINE DC/DC-Converter Pin Connections Pin #Dual 2–Vin 3–Vin 9+Vout 2 11–Vout 2 14+Vout 1 16–Vout 1 22+Vin 23+Vin NC = No Connection Package Style and Pinning (mm) Wide Input 2:1 !) )     * !    ! ) ) ) 1 2)%3 ) !) ) )! ) ! '(  4 # Recommended Footprint Details 24 PIN DIP Package VViinn == 1122,, 2244,, 4488VV Vin = 5V XX.X ± 0.5 mm XX.XX ± 0.25 mm
         
        )9  9 0 *  
  
         
        )9  9 0 *  
   Derating-Graph (Ambient Temperature) Relative Humidity95% RH Case MaterialNon-Conductive Plastic Thermal ImpedanceNatural convection20°C/W for metal case Package Weight13g MTBF (+25°C)using MIL-HDBK 217F877 x 10 3 hours (+80°C)using MIL-HDBK 217F138 x 10 3 hours Detailed Information see Application Notes chapter "MTBF"

External Photos Figure 1 Front View IG-CR-46D-916/ IG-CR-86D-916 Figure 2 Rear View IG-CR-46D-916/ IG-CR-86D-916 Figure 3 Top View IG-CR-46D-916/ IG-CR-86D-916 Figure 4 Bottom View IG-CR-46D-916/ IG-CR-86D-916 Figure 5 Top View Power Supply IG-PS-4RI/IG-PS-8RI Figure 6 Bottom View Power Supply IG-PS-4RI/IG-PS-8RI Figure 7 Side View 1 Power Supply IG-PS-4RI/IG-PS-8RI Figure 8 Side View 2 View Power Supply IG-PS-4RI/IG-PS-8RI Figure 9 Side View 3 View Power Supply IG-PS-4RI/IG-PS-8RI

Label location on EUT

Figure 1 : Product label model IG-CR-46D-916 Figure 2 : Product label model IG-CR-86D-916 (with same FCC ID number as IG-CR-46D-916)

Internal Photos Figure1 Front Cover Internal View IG-CR-46D-916 Figure 2 PCB in Case IG-CR-46D-916 Figure 3 PCB Side 1 IG-CR-46D-916 Figure 4 PCB Side 2 IG-CR-46D-916 Figure 6 PCB in Case IG-CR-86D-916 Figure 7 PCB Side 1 IG-CR-86D-916 Figure 8 PCB Side 2 IG-CR-86D-916 Figure Internal View PS IG-PS-4RI/ IG-PS-8RI

Theory of Operation The Compact Reader consists of a single PCB that essentially contains a Control unit, UHF transceiver module, serial communication interfaces and I/O's drivers. The UHF module is a Chipcon's RF Transceiver -model CC1021 (Complies with FCC CFR47 part 15) The module, oscillated from a 14.7456 MHz crystal oscillator, provides operational frequency (transmit/receive) at 916.5MHz, it is FSK modulated with 40KHz deviation and 16KHz data rate. Typically, the UHF receiver is constantly open for burst messages coming from the sensors in order to obtain continuously "listening". In Tx mode - the reader interrogates the sensors for their ID, status and user data. It writes information into the sensors and retrieves logged information (events) into its Flash memory module. The demodulated data coming from the UHF transceiver transferred to the control unit (Texas Instruments MSP430 16-bit Microcontroller) via the SPI channel for processing & decoding. The microcontroller fed from two clocks: 32.678 KHz for internal real-time clock and a 6MHz crystal for its operation. Two serial communication interfaces (RS232, RS485) used to exchange data between the reader and the user (controlling PC) the I/O module provides one external interrupt input (active low, isolated) as well as three isolated outputs for general purpose. The Reader powered from an indoor power supply & comm. unit (PSC unit) that provides both protected and isolated power and serial communication lines. The PSC unit contains AC/DC adapter providing protective and isolated operation DC power (24VDC or 48VDC depends on model) for the outdoor compact reader. It also equipped with RS-232 to RS-485 converter module for standard bi-directional serial communication between the outdoor compact reader (RS-485 interface) and controlling PC (RS-232 interface)

Cert. No. 1152.01 Electrical (EMC) Test Report E70353.00 Hi-G-Tek Ltd. Page 1 of 48 ITL FCCMASVE 1.25 26 March 2003 DATE: 28 June 2007 I.T.L. (PRODUCT TESTING) LTD. FCC EMC/Radio Test Report for Hi-G-Tek Ltd. Equipment under test: Compact Reader and Power Supply & Communication IG-CR46D-916 (CR) IG-PS-4RI (PSC) Written by: _____________________________ D. Shidlowsky, Documentation Approved by: _____________________________ E. Pitt, Test Engineer Approved by: _____________________________ I. Raz, EMC Laboratory Manager This report must not be reproduced, except in full, without the written permission of I.T.L. (Product Testing) Ltd. This report relates only to items tested. Cert. No. 1152.01 Electrical (EMC) Test Report E70353.00 Hi-G-Tek Ltd. Page 2 of 48 ITL FCCMASVE 1.25 26 March 2003 Measurement/Technical Report for Hi-G-Tek Ltd. Equipment under test: Compact Reader and Power Supply & Communication FCC ID: OB6-IGCR46D916 DATE: 28 June 2007 This report concerns: Original Grant x Class II change ___ Class B verification Class A verification Class I change ____ Equipment type: Radio Transmitter Request Issue of Grant: x Immediately upon completion of review Limits used: CISPR 22 Part 15 x Measurement procedure used is ANSI C63.4-2003. Application for Certification Applicant for this device: prepared by: (different from "prepared by") Ishaiahou Raz Yossi Hershko ITL (Product Testing) Ltd. Hi-G-Tek Ltd. 1 Batsheva St. P.O.B. 87 16 Hacharoshet St. Lod 71100 Or Yehuda 60375 Israel Israel Tel: +972-8-915-3100 Tel: +972-3-533-9359 Fax: +972-8-915-3101 Fax: +972-3-533-8225 Email: [email protected] Email: [email protected] Test Report E70353.00 Hi-G-Tek Ltd. Page 3 of 48 ITL FCCMASVE 1.25 26 March 2003 TABLE OF CONTENTS 1. GENERAL INFORMATION ------------------------------------------------------------------------------- 4 1.1 Administrative Information.................................................................................4 1.2 List of Accreditations .........................................................................................5 1.3 Product Description ...........................................................................................6 1.4 Test Methodology ..............................................................................................8 1.5 Test Facility .......................................................................................................8 1.6 Measurement Uncertainty .................................................................................8 2. PRODUCT LABELING------------------------------------------------------------------------------------- 9 3. SYSTEM TEST CONFIGURATION--------------------------------------------------------------------11 3.1 Justification......................................................................................................11 3.2 EUT Exercise Software ...................................................................................11 3.3 Special Accessories ........................................................................................11 3.4 Equipment Modifications .................................................................................11 3.5 Configuration of Tested System ......................................................................12 4. BLOCK DIAGRAM-----------------------------------------------------------------------------------------13 4.1 Schematic Block/Connection Diagram ............................................................13 4.2 Theory of Operation ........................................................................................14 5. FIELD STRENGTH OF FUNDAMENTAL ------------------------------------------------------------15 5.1 Test Specification ............................................................................................15 5.2 Test Procedure ................................................................................................15 5.3 Measured Data ................................................................................................15 5.4 Test Instrumentation Used, Field Strength of Fundamental ...........................19 6. CONDUCTED AND RADIATED MEASUREMENT PHOTOS ----------------------------------20 7. CONDUCTED EMISSION TEST DATA --------------------------------------------------------------21 7.1 Test Specification ............................................................................................21 7.2 Test Procedure ................................................................................................21 7.3 Test Data .........................................................................................................21 7.4 Test Instrumentation Used, Conducted Measurement ...................................26 8. SPURIOUS RADIATED EMISSION 30MHZ-1000 MHZ------------------------------------------27 8.1 Measured Data ................................................................................................27 8.2 Test Instrumentation Used, Radiated Measurements.....................................32 8.3 Field Strength Calculation ...............................................................................33 9. SPURIOUS RADIATED EMISSION ABOVE 1 GHZ ----------------------------------------------34 9.1 Spurious Radiated Emission Above 1 GHz.....................................................34 9.2 Test Data .........................................................................................................35 9.3 Test Instrumentation Used, Spurious Radiated Measurements Above 1 GHz ...................................................................................................38 10. PHOTOGRAPHS OF TESTED E.U.T. ----------------------------------------------------------------39 11. APPENDIX A - CORRECTION FACTORS ----------------------------------------------------------43 11.1 Correction factors for CABLE ............................................................…

Text truncated - open the document above for the full version.

Conducted and Radiated Measurement Photos Figure 1. Conducted Emission Test Figure 2. Radiated Emission Test