OB6-IGRF97433ISO-18000- FIXED RFID INTERROGATOR

Proprietary Notice This document contains Hi‐G‐Tek Inc. proprietary confidential information and may not be used or disclosed to other parties in whole or in part without prior written authorization from Hi‐G‐Tek Inc. UM 4901_Rev 1.1 18.7 Secure Series Tags Unisys Delivering Global Visibility. Active Fixed RFID Interrogator CLIN: 0001AA Installation & Operation Manual Disclaimer and Limitation of Liability Hi‐G‐Tek Inc. affiliates, officers, directors, employees and agents provide the information contained in this Manual on an “as‐is” basis and do not make any express or implied warranties or representations with respect to such information including, without limitation, warranties as to non‐infringement, reliability, fitness for a particular purpose or application, usefulness, completeness or accuracy. Hi‐G‐Tek Inc. shall not in any circumstances be liable to any person for any special, incidental, indirect or consequential damages, including without limitation, damages resulting from use of or reliance on information presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in advance of the possibility of such damages. Copyright Notice All rights reserved. No part of this document may be reproduced or transmitted in any form by any means, photographic, electronic, mechanical or otherwise, or used in any information storage and retrieval system, without the prior written permission of Hi‐G‐Tek Inc. This document is subject to change without prior notice. ATTENTION • This Hi‐G‐Tek product is designed for commercial/industrial use only, and should only be handled by personnel authorized by Hi‐G‐Tek representatives. • Installation must be performed according to this Guide. • Using only certified antennas: It is the responsibility of the installer to ensure that when using the outdoor antenna kits in the United States (or where FCC rules apply), only those antennas certified with the product are used. • The use of any antenna other than those certified with the product is expressly forbidden in accordance with FCC rules CFR47 part 15.204 and part 15.203. The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. Installation & Operation: Active Fixed RFID Interrogator UM 4901_Rev 1.1 Page 3 of 11 FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. Instructions concerning human exposure to radio frequency electromagnetic fields: A distance of at least 20cm. between the equipment and all persons should be maintained during the operation of the equipment. FCC ID: OB6‐IGRF97433 Active Fixed RFID Interrogator: IG‐RF‐97D1‐433, CLIN# 0001AA Spare Parts Hi‐G‐Tek recommends that only original products, spare and replacement parts authorized by Hi‐G‐Tek Inc. be used for installation, service and repair. Hi‐G‐Tek Inc. does not accept any responsibility and will not be liable for any consequences due to improper materials used. Hi‐G‐Tek , Inc. 1445 Research Blvd. Suite 150 Rockville, MD 20850 USA [email protected] Office: +1‐301‐279‐0022 Fax: +1‐301‐279‐0055 Installation & Operation: Active Fixed RFID Interrogator UM 4901_Rev 1.1 Page 4 of 11 Table of Content 1 Introduction ...................................................................................................................................................... 5 2 Installation ......................................................................................................................................................... 5 2.1 Mounting the Fixed RFID Interrogator ....................................................................................... 5 2.1.1 Wall mounting installation ...................................................................................................... 6 2.1.2 Pole mounting installation ...................................................................................................... 6 2.1.3 Connecting hookup cables ....................................................................................................... 7 2.2 Installation accessories and connecting cables ....................................................................... 8 3 Technical Specifications ............................................................................................................................ 10 List of Figures Figure 1: Fixed RFID Interrogator ..................................................................................................................... 5 Figure 2: Wall mounting the interrogator ..................................................................................................... 6 Figure 3: Pole mounting ........................................................................................................................................ 6 Figure 4: Bottom view of Interrogator .............................................................…

Text truncated - open the document above for the full version.

November 01, 2009 Attn: Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: OB6-IGRF97433 Dear Sir or Ma'am, Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying these applications as outlined below: • CONF APPENDIX IG-RF-97D1-433 Schem.pdf • CONF APPENDIX IG-RF-97D1-433 BlkDia.pdf • CONF APPENDIX IG-RF-97D1-433 PartsLst.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Hi-G-Tek Ltd. understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application.

November 01, 2009 Attn: Timco Engineering Inc. To Whom It May Concern, Letter of Authorization We hereby authorize Mr. Shaike Raz of I.T.L. (Product Testing) Ltd (ITL) to act on the behalf of Hi-G-Tek Ltd, regarding the FCC ID Certification Process for the following application: 18.7 series, Active Fixed RFID Interrogator, Model IG-RF-97D1-433, FCC ID: OB6-IGRF97433

Main board #P49006 REV‐B with modules Main board #P49006 REV‐B w/o modules #P49007‐ UHF Transceiver PCB SEE PAGE 2 On board computer unit VAR‐320SBC SEE PAGE 3 Main board #P49006 ‐PS P49007‐ UHF Transceiver PCB (You should replace these pictures with the ones that Roni has sent you as he took the pics without the shield on) Add on module ‐on board computer unit VAR‐320SBC, part number SBC320V Connection board #P49009 Power supply board #P49008

The unit is connected to a host control computer, either directly or via Ethernet, and monitors all transponders in its vicinity The interrogator performs periodic monitoring requests of all transponders, by broadcasting a “wake up” request sent to all the transponders and each one of them responds with its a present status.

DATE: 28 December 2009 I.T.L. (PRODUCT TESTING) LTD. FCC Radio Test Report for Hi-G-Tek Ltd. Equipment under test: ISO 18000-7 Fixed RFID Interrogator IG-RF-97D1-433 Written by: ____________________________ Y. Raz, Documentation Approved by: _____________________________ E. Ever, Test Engineer Approved by: _____________________________ I. Raz, EMC Laboratory Manager This report must not be reproduced, except in full, without the written permission of I.T.L. (Product Testing) Ltd. This report relates only to items tested. Test Report E93780.00 Hi-G-Tek Ltd. Page 1 of 43 FCC ACC M Ver 1.1 05Mayl 2000 Test Report E93780.00 Hi-G-Tek Ltd. Page 2 of 43 FCC ACC M Ver 1.1 05Mayl 2000 Measurement/Technical Report for Hi-G-Tek Ltd. ISO 18000-7 Fixed RFID Interrogator IG-RF-97D1-433 FCC ID: OB6-IGRF97433 28 December 2009 This report concerns: Original Grant: x Class I change: Class II change: Equipment type: Part 15 Security/Remote Control Transceiver 47CFR15 Section 15.231 (a-d) Measurement procedure used is ANSI C63.4-2003. Application for Certification Applicant for this device: prepared by: Roni Cohen Ishaishou Raz 16 Hacharoshet St. ITL (Product Testing) Ltd. Or Yehuda 60375 Kfar Bin Nun Israel D.N. Shimshon 99780 Israel e-mail [email protected] Tel: +972-3 -533-9359 Fax: +972-3-533-9225 e-mail: [email protected] TABLE OF CONTENTS 1. GENERAL INFORMATION ------------------------------------------------------------------------------- 5 1.1 Administrative Information ................................................................................. 5 1.2 List of Accreditations ......................................................................................... 6 1.3 Product Description ........................................................................................... 7 1.4 Test Methodology .............................................................................................. 7 1.5 Test Facility ....................................................................................................... 7 1.6 Measurement Uncertainty ................................................................................. 7 2. SYSTEM TEST CONFIGURATION --------------------------------------------------------------------- 8 2.1 Justification ........................................................................................................ 8 2.2 EUT Exercise Software ..................................................................................... 8 2.3 Special Accessories .......................................................................................... 8 2.4 Equipment Modifications ................................................................................... 8 2.5 Configuration of Tested System ........................................................................ 8 3. CONDUCTED AND RADIATED MEASUREMENT TEST SET-UP PHOTO ----------------- 9 4. CONDUCTED EMISSION DATA -----------------------------------------------------------------------10 4.1 Test Specification ............................................................................................ 10 4.2 Test Procedure ................................................................................................ 10 4.3 Measured Data ................................................................................................ 10 4.4 Test Instrumentation Used, Conducted Measurement ................................... 15 5. AVERAGE FACTOR CALCULATION ----------------------------------------------------------------16 5.1 Test Instrumentation Used .............................................................................. 17 6. PERIODIC OPERATION ---------------------------------------------------------------------------------18 6.1 Specification .................................................................................................... 18 6.2 Requirements .................................................................................................. 18 6.3 Results............................................................................................................. 18 7. FIELD STRENGTH OF FUNDAMENTAL ------------------------------------------------------------22 7.1 Test Specification ............................................................................................ 22 7.2 Test Procedure ................................................................................................ 22 7.3 Measured Data ................................................................................................ 22 7.4 Test Instrumentation Used, Field Strength of Fundamental ........................... 26 8. RADIATED EMISSION, 9 KHZ – 30 MHZ -----------------------------------------------------------27 8.1 Test Specification ............................................................................................ 27 8.2 Test Procedure ................................................................................................ 27 8.3 Measured Data ................................................................................................ 27 8.4 Test Instrumentation Used, Radiated Measurements .................................... 28 8.5 Field Strength Calculation ............................................................................... 29 9. SPURIOUS RADIATED EMISSION -------------------------------------------------------------------30 9.1 Test Specification ............................................................................................ 30 9.2 Test Procedure ................................................................................................ 30 9.3 Test Data ......................................................................................................... 31 9.4 Test Instrumentation Used, Radiated Measurements .................................... 32 10. BANDWIDTH -------------------------------------------------------------------------------------…

Text truncated - open the document above for the full version.