ODGQOOLQEEXDigital Audio Player

FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 1/1 ATTACHMENT E. - USER’S MANUAL - 1 [TABLE OF CONTENTS] Chapter 0 QUICK START 1. Power On / Off 2. Listening to music 3. Listening to radio 4. Charging the battery Chapter 1 GETTING STARTED 1. Introduction 2. Copyrights and Certification 3. Registered Trademarks 4. Product Features 5. Package Contents 6 Product Overview 7. Button Operations Chapter 2 BASIC OPERATIONS 1. Before installation 2. Installing software - Install CD 3. Connecting the product to a PC 4. File Management using a removable disk - File Upload / Download - Format 5. Disconnecting the product from a PC 6. Firmware Upgrade 7. Mode Switch Chapter 3 MP3 MODE 1. MP3 Play / Stop 2. Fast-forward / Rewind 4. REPEAT Mode Setup 5. LED On / Off 6. EQ 7.Volume Control 2 Chapter 4 FM RADIO MODE 1. How to scan 2. How to auto-scan 3. Changing channel 4. LED On / Off 5.Volume Control Chapter 5 MISCELLANEOUS 1. General Cautions 2. Earphone-related Cautions 3. Battery-related Caution 4. Troubleshooting 5. Product Specifications 3 Chapter 0 QUICK START 1. Power On / Off 1) While the product is off, press and hold the <Play / Pause> button to turn the power on. 2) While the product is on, press and hold the <Play / Pause> button to turn the power off. 2. Listening to music 1) Press the <Play / Pause> button briefly to play or stop music in MP3 mode. 3. Listening to radio 1)To enter FM RADIO mode, press and hold the <Mode Change> button briefly. 4. Charging the battery The Qoolqee X can be charged by a PC and a USB adaptor. If the device is connected to a PC that is powered on, or to a USB cable, it goes into USB CONNECT status and starts charging. If the battery goes low, a red led will blink. After fully discharged, the device will turn off, automatically. To charge the battery with your PC: After lifting the USB cover located at the bottom of the product as shown in the picture, connect it to your PC via a USB cable. 4 While charging is in progress, the led is red, and led become blue when charging is complete. To fully charge, it takes 3 hours and the battery lasts for 10 hours. To charge the battery with a USB adapter: After lifting the USB cover located at the bottom of the product, connect the USB plug of an adapter that is connected to power to the USB port of the product. (!!) The suitable adapter for Qoolqee X 5V, 1.2A. 5 Chapter 1 GETTING STARTED 1. Introduction 1) Qoolqee K7 Thank you for purchasing our product. This manual is provided for correct use of the product. Please read it horoughly before using the product. http://www.qoolqee.com 2) You can obtain product information, and also have your questions answered. By registering with the product serial number indicated on the manual, you can receive online support from us, and upgrade firmware for enhancement of the product’s features. The content of the manual may be revised according to product specifications at the time of release. The revised manual may be downloaded via our web site. 2. Copyrights and Certification 1) The copyright of this manual is owned by Hantel Co., Ltd. Any unauthorized duplication or distribution of all or any part of the manual is prohibited. WMA is the registered trademark of Microsoft corp. The copyright of the Hantel MP3 software program is owned by Hantel Co., Ltd. and any unauthorized duplication, distribution or commercial use of the program without the prior written consent of Hantel Co., Ltd. is against the law. With the exception of the right provided to the user specifically for use of the product, this manual does not grant the user any other right to use patents, trademarks, copyrights or any other intellectual property rights owned by Hantel Co., Ltd. 6 2) FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 3. Registered Trademarks 1. Windows, Windows 98 SE, Windows ME, Windows 2000, Windows XP and Windows Media Player are the registered trademarks of Microsoft Corp. 7 4. Product Features z Light just like a feather -26g z It was born for the outdoor sports-water resistance such as rain, sweat z USB 2.0 High speed z Support MP3, WMA, ASF, OGG (Q1~Q10) z Random z Edit your own Play List z Resume z Various EQs such as Normal, Rock, Jazz, Classic, Pop, Live z User friendly UI z FM Radio Listening z Built-in Lithium Polymer Battery z Firmware Upgradeable z Use it as a Removable disk 8 5. Package Contents Main Unit, Install CD (including User’s manual), USB Cable , Quick Guide, Earphones, A/C adapter (Option) [NOTE] The above components may change without prior notice for enhancement of product performance. 9 6. Product Overview )1) Earphone Jack 2) Mode change 3) Volume + 4) Power On / Off 5) REW 6) LED 7) FF 8) Auto Scan / Shuffle 9) Volume – 10) EQ 11) USB Cover 12) X2: Clip for hang X3: Band Clip 13…

Text truncated - open the document above for the full version.

FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 1/1 ATTACHMENT C. - BLOCK DIAGRAM -

Helen Zhao Subject: FW: Hantel Co., Ltd., FCC ID: ODGQOOLQEEX, Assessment NO.: AN05T4906, Notice#1 7/13/2005 From: CHA Sent: Monday, July 11, 2005 6:21 PM To: Helen Zhao Subject: Re: Hantel Co., Ltd., FCC ID: ODGQOOLQEEX, Assessment NO.: AN05T4906, Notice#1 Dear Helen, Finally I have all response about Hantel Co., Ltd., FCC ID: ODGQOOLQEEX, Assessment NO.: AN05T4906. #1 : Attached please find "Authorization Letter(HANTEL).pdf." #2 : Attached please find "ATT.A_Qoolqee X IDlabel_.pdf." #3 : Attached please find "ATT.C_Qoolqee X BLOCK DIAGRA_.pdf." Thank you very much. CHA. > -----Original Message----- > From: Compliance Certification Services [mailto:[email protected]] > Sent: Thursday, June 30, 2005 3:51 PM > To: Helen Zhao > Subject: Hantel Co., Ltd., FCC ID: ODGQOOLQEEX, Assessment NO.: > AN05T4906, Notice#1 > > > Question #1: Please submit an Agent Authorization Letter on applicant's company letterhead. > > Question #2: Based upon FCC2.926(d) "the equipment product code assigned by the grantee shall consist of a series of Arbic numberals, capital letters...", however the documents provided in the filing show lower case letters in FCC ID. Please revise FCC ID label format as well as other documents showing FCC IDs. > > Question #3: Please resubmit a clear and readable Block Diagram. > Best Regards, > Helen Zhao The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 1/11 ATTACHMENT B. - EXTERNAL PHOTOS - FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 2/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 3/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 4/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 5/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 6/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 7/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 8/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 9/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 10/11 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 11/11

FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 1/3 ATTACHMENT A. - ID LABEL INFORMATION AND LOCATION PHOTOS - FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 2/3 1.1 ID Label Information Following is a copy of the label that will be placed on the rear side of the cabinet. Figure 3.1 PRODUCT LABEL Both the FCC ID and compliance statement are included in the product label FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 3/3 1.2 Label Location Photos LABEL LOCATION

FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 1/10 ATTACHMENT F. - INTERNAL PHOTOS - FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 2/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 3/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 4/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 5/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 6/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 7/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 8/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 9/10 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 10/10

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. Product Compliance Division, EMC Team SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701, KOREA CERTIFICATION Rule Part(s): Equipment Class: Standard(s): EUT Type: Memory: Model(s): Port/Connector(s) This equipment has been shown to be in compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2003 I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. 1/ 20 ODGQOOLQEEX Qoolqee X FCC ID : MODEL /TYPE: Part 15 & 2 FCC Class B Peripheral Device (JBP) FCC Class B: (CISPR 22) Digital Audio Player 256, 512MB,1GB Qoolqee X AUDIO IN/OUT, USB Manufacture; HANTEL CO., LTD. #513-15,Suntecity,Sangdaewon-Dong,Jungwon-Gu, Seongnam-Si,Kyunggi-Do 462-806,Korea KONINE FRN : 0007460181 Date of Issue : June 24, 2005 Test Report No.: HCT-F05-0603 Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HCT FRN : 0005-8664-21 FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 2/26 TABLE OF CONTENTS PAGE REPORT COVER 1 TABLE OF CONTENTS 2 1. SCOPE 3 2. INTRODUCTION (SITE DESCRIPTION) 4 3. PRODUCTION INFORMATION 5 4. DESCRIPTION OF TESTS (CONDUCTED) 6 4. DESCRIPTION OF TESTS (RADIATED) 7 5. LIST OF SUPPORT EQUIPMENT 8-10 6. PRELIMENARY TEST 11 7. TEST DATA (CONDUCTED) 12-20 8. TEST DATA (RADIATED) 21-22 9. SAMPLE CALCULATIONS 23 10. TEST EQUIPMENT 24 11. TEST SOFTWARE USED 25 12. CONCLUSION 26 ATTACHMENT A : FCC ID LABEL & LOCATION ATTACHMENT B : EXTERNAL PHOTOGRAPHS ATTACHMENT C : BLOCK DIAGRAM ATTACHMENT D : TEST SETUP PHOTOGRAPHS ATTACHMENT E : USER’S MANUAL ATTACHMENT F : INTERNAL PHOTOGRAPHS FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 3/26 MEASUREMENT REPORT 1. Scope Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. • FCC ID : ODGQOOLQEEX • Equipment Class: FCC Class B Peripheral Device (JBP) • EUT Type: Digital Audio Player • Model(s):Qoolqee X • Memory : 256, 512MB,1GB • Rule Part(s): FCC Part 15 Subpart B • Test Procedure(s): ANSI C63.4 (2003) • Dates of Tests: June 24, 2005 • Place of Tests: 254-1,MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO,467-701,KOREA Applicant Name: Address: HANTEL CO., LTD. #513-15,Suntecity,Sangdaewon-Dong,Jungwon-Gu, Seongnam-Si,Kyunggi-Do 462-806,Korea FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 4/26 2. INTRODUCTION The measurement procedure described in American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSIC63.4-2001) was used in determining radiated and conducted emissions emanating from HANTEL CO., LTD. Digital Audio Player FCC ID: ODGQOOLQEEX The open area test site and conducted measurement facility used to collect the radiated data are located at the 254-1, MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO, 467-701,KOREA. The site is constructed in conformance with the requirements of ANSI C63.4and CISPR Publication 22. Detailed description of test facility was submitted to the Commission and accepted dated July 23,2003 (Confirmation Number: EA90661) FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 5/26 3. PRODUCT INFORMATION 3.1 Equipment Description Equipment Under Test (EUT) is the HANTEL CO., LTD. ( Model : Qoolqee X ) Digital Audio Player FCC ID: ODGQOOLQEEX USB VERSION : USB 2.0(High Speed : 25Mbps,transmission speed : 480Mbps),mass storage Supported OS: Windows98SE / ME / 2000 / XPand MAC 9.2 FM Radio : FM Tuner(20Preset),Band selectable Music play : 20Hz ~ 20KHz FM play : 76MHz ~ 108MHz Distortion : Under 0.1 Battery : Li-polymer (Under 350mAH) Earphone : 3.5 stereo,16, 1104dB at 1KHz EMI Suppression Devices: None FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 6/26 4. Description of Tests(Conducted) 4.1 Powerline Conducted RFI (150kHz- 30MHz) The power line conducted RFI measurements were performed according to CISPR 22. The EUT was placed on a non-conducting 1.0 by 1.5 meter table which is 0.8 meters in height and 0.40 meters away from the vertical wall of the shielded enclosure. Power to the EUT is provided through a Rohde & Schwarz 50 Ω / 50 uH Line Impedance Stabilization Network (LISN) and the support equipment through a separate Solar 50 Ω / 50 uH Line- Conducted Test Facility LISN. Sufficient time for the EUT, support equipment, and test equipment were allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer to determine the frequency producing the maximum EME. The spectrum was scanned from 150kHz to 30 MHz. Each maximum EME was remeasured using an EMI receiver. The detector function of the receiver was set to CISPR quasi- peak and average mode with the bandwidth set to 9 kHz. Each emission was maximized consistent with the typical applications by varying the configuration of the test sample. Interface cables were connected to the available interface ports of the test unit. The effect of varying the position of cables was investigated to find the configuration that produces maximum Diagram emission. Excess cable lengths were bundled at the center with 30- 40cm. in length. The worst-case configuration is noted in the test report and the photographs are attached. Each EME reported was calibrated using the Rohde & Schwarz SMX signal generator and are listed on Tab…

Text truncated - open the document above for the full version.

FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 1/6 ATTACHMENT D. - TEST SETUP PHOTOS- FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 2/6 1.CONDUCTED AND RADIATED MEASUREMENT PHOTOS [CONDUCTED MEASUREMENT PHOTO] - DATA UP/DOWN LOAD MODE - FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 3/6 - CHARGING MODE - FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 4/6 [RADIATED MEASUREMENT PHOTO] FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 5/6 - DATA UP/DOWN LOAD MODE - FCC ID : ODGQOOLQEEX REPORT NO. : HCT-F05-0603 HYUNDAI C–TECH 6/6 - CHARGING MODE -