ODGT4Pager

REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr ATTACHMENT C. - BLOCK DIAGRAM

REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 AT TA CH MEN T B. - EXTERNAL PHOTOS REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525

REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr ATTACHMENT A. - ID LABEL INFORMATION AND LOCATION PHOTOS REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr 1.1 ID Label Information Following is a copy of the label that will be placed on the rear side of the cabinet. Figure 3.1 PRODUCT LABEL Both the FCC ID and compliance statement are included in the product label REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr 1.2 Label Location Photos The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925) LABEL Location

REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 ATTACHMENT F. - INTERNAL PHOTOS REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. Product Compliance Division, EMC Team SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701, KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 CERTIFICATION Equipment Class: Standard(s): EUT Type: This equipment has been shown to be in compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2001. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part  HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD.  1/ 15 ODGT4 T4 Manufacture; Hantel Co.,Ltd #513-15, Suntechcity, BLD 5F, Sangdaewon-dong, Jungwon-gu, Seongnam, Kyunggi-do, South Korea HANTEL FRN : 0007460181 Date of Issue : JANUARY 25, 2005 Test Report No.: HCT-F05-0109 Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HCT FRN : 0005-8664-21 FCC ID : MODEL : Communications Rcvr for use w/ licensed Tx and CBs FCC Class B (CISPR 22) PAGER FCC ID : ODGT4 REPORT NO. : HCT-F05-0109 HYUNDAI C–TECH 2/15 TABLE OF CONTENTS PAGE REPORT COVER 1 TABLE OF CONTENTS 2 1. SCOPE 3 2. INTRODUCTION (SITE DESCRIPTION) 4 3. PRODUCTION INFORMATION 5 4. DESCRIPTION OF TESTS 6-7 5. LIST OF SUPPORT EQUIPMENT 8 6. TEST DATA (CONDUCTED) 9 7. PRELIMINARY TEST 10 8. TEST DATA (RADIATED) 11 9. SAMPLE CALCULATIONS 12 10. TEST EQUIPMENT 13 11. TEST SOFTWARE USED 14 12. CONCLUSION 15 ATTACHMENT A: FCC ID LABEL & LOCATION ATTACHMENT B: EXTERNAL PHOTOGRAPHS ATTACHMENT C: BLOCK DIAGRAM ATTACHMENT D: TEST SETUP PHOTOGRAPHS ATTACHMENT E: USER’S MANUAL ATTACHMENT F: INTERNAL PHOTOGRAPHS ATTACHMENT G: CIRCUIT DIAGRAM FCC ID : ODGT4 REPORT NO. : HCT-F05-0109 HYUNDAI C–TECH 3/15 MEASUREMENT REPORT 1. Scope Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. • FCC ID : ODGT4 • Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs • EUT Type: PAGER • Model :T4 • Rule Part(s): FCC Part 15 Subpart B • Test Procedure(s): ANSI C63.4 (2001) • Dates of Tests: JANUARY 24, 2005 • Place of Tests: 254-1, MAEKOK-RI, HOBUP-MYUN, ICHON-SI, KYOUNGKI-DO, 467-701, KOREA Applicant Name: Address: Hantel Co., Ltd. #513-15, Suntechcity, BLD 5F, Sangdaewon-dong, Jungwon-gu, Seongnam, Kyunggi-do, South Korea FCC ID : ODGT4 REPORT NO. : HCT-F05-0109 HYUNDAI C–TECH 4/15 2. INTRODUCTION The measurement procedure described in American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSI C63.4-2001) was used in determining radiated and conducted emissions emanating from Hantel Co., Ltd. PAGER. FCC ID : ODGT4. The open area test site and conducted measurement facility used to collect the radiated data are located at the 254-1, MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO, 467-701,KOREA. The site is constructed in conformance with the requirements of ANSI C63.4and CISPR Publication 22. Detailed description of test facility was submitted to the Commission and accepted dated July 23, 2003 (Confirmation Number: EA90661) FCC ID : ODGT4 REPORT NO. : HCT-F05-0109 HYUNDAI C–TECH 5/15 3. PRODUCT INFORMATION 3.1 Equipment Description Equipment Under Test (EUT) is the Hantel Co., Ltd. PAGER. FCC ID : ODGT4. • FCC ID : ODGT4 • Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs • EUT Type: PAGER • Model : T4 • Rule Part(s): FCC Part 15 Subpart B FCC ID : ODGT4 REPORT NO. : HCT-F05-0109 HYUNDAI C–TECH 6/15 4. Description of Tests(Conducted & Radiated) 4.1 Powerline Conducted Emission (150kHz- 30MHz) The power line conducted RFI measurements were performed according to CISPR 22. The EUT was placed on a non-conducting 1.0 by 1.5 meter table which is 0.8 meters in height and 0.40 meters away from the vertical wall of the shielded enclosure. Power to the EUT is provided through a Rohde & Schwarz 50 Ω / 50 uH Line Impedance Stabilization Network (LISN) and the support equipment through a separate Solar 50 Ω / 50 uH Line- Conducted Test Facility LISN. Sufficient time for the EUT, support equipment, and test equipment were allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer to determine the frequency producing the maximum EME. The spectrum was scanned from 150kHz to 30 MHz. Each maximum EME was remeasured using an EMI receiver. The detector function of the receiver was set to CISPR quasi- peak and average mode with the bandwidth set to 9 kHz. Each emission was maximized consistent with the typical applications by varying the configuration of the test sample. Interface cables were connected to the available interface ports of the test unit. The effect of varying the position of cables was investigated to find the configuration that produces maximum Diagram emission. Excess cable lengths were bundled at the centre with 30- 40cm. in length. The worst-case configuration is noted in the test report and the photographs are attached. Each EME reported was calibrated using the Rohde & Schwarz SMX signal generator and are listed on Table 1. RFI Conducted FCC Class B RFI CONDUCTED FCC CLASS B Limits dB(uV/m) Freq. Range CISPR 22 Quasi-Peak CISPR 22 Average 150kHz - 0.5MHz 66-56* 56-46* 0.5MHz - 5MHz 56 46 5MHz - 30MHz 60 50 *Limits decreases linearly with the logarithm of frequency Table 1. FCC CLASS B Conducted Limits FCC ID : ODGT4 REPORT NO. : HCT-F05-0109 HYUNDAI C–TECH 7/15 4.2 Description of Tests(Radiated) Radiated Em…

Text truncated - open the document above for the full version.

REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr ATTACHMENT D. - TEST SETUP PHOTOS REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr [RADIATED MEASUREMENT PHOTO] [ Top Mode] REPORT NO : HCT-F05-0109 FCC ID : ODGT4 DATE :JANUARY 25, 2005 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr [ Bottom Mode]