
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
THE ONE IN A MILLION ROBOT DOG TM 1 x USB Type-C Charging Cable / USB Type-C Câble De Recharge USB Type-C Cable De Carga 1 x Dog-E™ 1 X Collar / Collier 1 x Additional Tag / Étiquette Supplémentaire Etiqueta Adicional 1 x Bone Toy / Jouet Os / Juguete De Hueso 1 x USB Type-C Charging Cable (AC Adapter Not Included) USB Type-C Câble De Recharge (Adaptateur Secteur Non Inclus) USB Type-C Cable De Carga (Adaptador De Ca No Incluido) 1 x Quick Start Guide Guide De Démarrage Rapide Guía De Inicio Rápido 1 x Contents & Safety Guide Contenu et guide de sécurité Contenido y guía de seguridad CONTENTS / CONTENU / CONTENIDO INTRODUCTION / INTRODUCCIÓN CHARGE BATTERY / CHARGEMENT DE LA BATTERIE / CARGA DE LA BATERÍA 1 x Dog-E™ OR OU O OR OU O 1 x Tag / Étiquette / Etiqueta PLEASE NOTE THE FOLLOWING WHEN OPERATING Dog-E™: • Do not immerse Dog-E™ or any of its parts or accessories in water or any other form of liquid. • Do not drop, throw, or kick Dog-E™ or its accessories as this may damage mechanical functions. • Do not leave Dog-E™ unattended near edges from which it could fall. • Dog-E runs forward during some play. It is best to play with Dog-E on the floor with space around it, so it does not fall when it moves. VEUILLEZ TENIR COMPTE DES POINTS SUIVANTS QUAND VOUS MANŒUVREZ DOG-E™ : • Ne pas immerger Dog-E™ ou l’une de ses pièces ou accessoires dans de l’eau ou dans un liquide quelconque. • Ne pas faire tomber, jeter ou frapper du pied Dog-E™ car cela peut endommager ses fonctions mécaniques. • Ne pas laisser Dog-E™ sans surveillance à proximité de rebords d’où il pourrait tomber. • Dog-E court vers l'avant pendant certains jeux. Il est préférable de jouer avec Dog-E sur le sol, avec de l'espace autour de lui, afin qu'il ne tombe pas lorsqu'il se déplace. TEN EN CUENTA LO SIGUIENTE CUANDO USES DOG-E™: • No sumerjas a Dog-E™ ni ninguno de sus componentes en agua ni en ninguna otra forma de líquido. • No dejes caer, lances o des patadas a Dog-E ™ o a sus accesorios, ya que esto podría dañar sus funciones mecánicas. • No dejes a Dog-E™ sin supervisión cerca de bordes desde los que pudiera caerse. • Dog-E corre hacia delante durante algunos juegos. Es mejor jugar con Dog-E en el suelo, con espacio a su alrededor, para que no se caiga cuando se mueva. DC IN 5.0V 1.5A / CC EN 5,0 V 1,5 A * The Dog-E™ is operated by 1 x 3.7V 2000 mAh Lithium-ion rechargeable battery. (included) * L'Dog-E™ fonctionne avec une batterie rechargeable au lithium-ion 3,7V 2000 mAh (incluse) * El dron Dog-E™ funciona con una batería recargable de iones de litio de 3,7 V 2000 mAh (incluida) LED INDICATORS / INDICATEURS LED INDICADORES LED Flashing = CHARGING Clignotant = EN CHARGEMENT Luz intermitente = CARGANDO Lights off = FULLY CHARGED Lumière éteinte = CHARGE COMPLÈTE Luz apagada = CARGA COMPLETA ON ACTIVÉ OFF DÉSACTIVÉ * Keep OFF when charging / Éteindre lors de la charge / Apagado durante la carga CONTENTS & SAFETY GUIDE CONTENU ET GUIDE DE SECURITE CONTENIDO Y GUIA DE SEGURIDAD 1 x Bone Toy / Jouet Os Juguete De Hueso CHARGE TIME: Approximately 75 MINUTES EMPS DE CHARGE : Approximativement 75 MINUTES TIEMPO DE CARGA: Unos 75 MINUTOS 1 X Collar / Collier WOWWEE GROUP LIMITED Energy Plaza, 301A-C 92 Granville Road T.S.T. East, Hong Kong WOWWEE CANADA INC. 3700 Saint Patrick Street Suite 206, Montreal, QC H4E 1A2, Canada WARNING! This equipment may experience difficulty and/or memory loss when subjected to any electrostatic discharge, radio frequency interference, or sudden power surge/interruption. The user is encouraged to reset the equipment should any of these occur. ATTENTION ! Cet appareil peut rencontrer des difficultés et/ou une perte de mémoire quand il est soumis à une décharge électrostatique, à des interférences de fréquence radio ou à une surcharge/interruption électrique soudaine. Nous encourageons l’utilisateur à réinitialiser l’appareil si cela venait à se produire. ¡AVISO! Este equipo podría sufrir dificultades o pérdida de memoria cuando está sometido a una descarga electrostática, interferencia de radiofrecuencia o una interrupción o subida repentina de la potencia eléctrica. Se sugiere al usuario que reinicie el equipo si se diera alguna de estas situaciones. Manufactured and distributed by WowWee Group Limited. Dog-E™ and all product names, designations and logos are trademarks of WowWee Group Limited. Copyright 2022 WowWee Group Limited. All rights reserved. Customer Service Website: https://support.wowwee.com We recommend that you retain our address and instruction sheet for future reference. Product and colors may vary. Packaging printed in China. WARNING! This product is not suitable for children under 3 years because of small parts - choking hazard. WARNING: This toy produces flashes that may trigger epilepsy in sensitised individuals. CAN ICES-003(B)/NMB-003(B) MADE IN CHINA CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the rece…
Text truncated - open the document above for the full version.
Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name WowWee Group Limited Address Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong Grantee Code OKP FCC ID OKP1691 Authorized Contact Name Dennis Tsoi Contact Email [email protected] Contact Phone 852-2722-2767 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [WowWee Group Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [WowWee Group Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023-06-06 Print Name: Dennis Tsoi Title: Quality Assurance Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database
UNITED STATES DESIGNATED AGENT LETTER Date: June 19, 2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: WowWee Group Limited Company Name: WowWee USA Inc. Grantee Code: OKP FRN: 0033912247 Contact Name: Peter Yanofsky Contact Name: Dennis Tsoi Address: Address: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST Kowloon Hong Kong 5845 Camino de la Costa La Jolla CA 92037 Telephone: Telephone: 852-2722-2767 401-524-6950 Email: Email: [email protected] [email protected] Applicable Equipment: FCC ID: OKP1691 ATTN: Director of Certification: We, < WowWee Group Limited > and WowWee USA Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < WowWee Group Limited > and WowWee USA Inc. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Dennis Tsoi Name (Printed): Peter Yanofsky Title: Quality Assurance Manager Title: President Signature: Signature: Peter Yanofsky
WowWee Group Limited Date: 2023-06-06 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: OKP1691 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with WowWee Group Limited. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Dennis Tsoi Title: Quality Assurance Manager Signature: On behalf of Company: WowWee Group Limited Telephone: 852-2722-2767 E-mail: [email protected]
WowWee Group Limited TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: OKP1691 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Dennis Tsoi Title: Quality Assurance Manager Signature: On behalf of Company: WowWee Group Limited Telephone: 852-2722-2767 E-mail: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 Appendix External Photos for SZCR2306001737AT FCC ID: OKP1691 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5 - End of the Appendix -
06 Feb 2023 #1691 Mintid Dog-E - Legal Lines • BODY legal lines • Output Elements in “FOR OUTPUT” Layer in le • Scale 1:1 KEY: [Sliver - PMS 877C] EMBOSS BOTTOM WITHOUT BATTERY DOOR BOTTOM WITHOUT BATTERY DOOR RIGHT INNER LEFT INNER [for output] PRINT [for output] 1691 ONOFF DC IN 5V 1.5A ONOFF DC IN 5V 1.5A RIGHT INNER 1691 IC: 7091A-1691 FCC ID: OKP1691 CAN ICES-003(B)/NMB-003(B) Canada 310 This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. LEFT INNER IC: 7091A-1691 FCC ID: OKP1691 CAN ICES-003(B)/NMB-003(B) Canada 310 This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. ©2022 WOWWEE MADE IN CHINA ©2022 WOWWEE MADE IN CHINA
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 7 Appendix Internal Photos for SZCR2306001737AT FCC ID: OKP1691 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 7 - End of the Appendix -
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173703 Page: 1 of 12 3 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2306001737AT Applicant: WowWee Group Limited Address of Applicant: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST, Kowloon, Hong Kong Manufacturer: WowWee Group Limited Address of Manufacturer: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST, Kowloon, Hong Kong Factory: Shao Guan Early Light International Co., Ltd. Address of Factory: XURI Toy industry zone 6km, The western suburbs of Shaoguan City, Guangdong, China Equipment Under Test (EUT): EUT Name: Mintid Dog-E Model No.: 1691 Trade Mark: WowWee FCC ID: OKP1691 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-06-02 Date of Evaluation: 2023-06-05 to 2023-06-08 Date of Issue: 2023-06-09 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173703 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2023-06-09 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173703 Page: 3 of 12 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ............................................................................................................... 11 5.1 Maximum transmit power ................................................................................................................. 11 5.2 RF Exposure Calculation ................................................................................................................. 11 6 EUT Constructional Details (EUT Photos) ........................................................................................... 12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173703 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Rechargeable battery:DC 3.7V 2000mAh 7.4Wh(Charging by USB cable) Cable(s): USB cable:95cm unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Rate data: 1Mbps Antenna Type: PCB Antenna Antenna Gain: -0.89dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173703 Page: 5 of 12 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American As…
Text truncated - open the document above for the full version.
ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page1of10 TestingReport CustomerName:ShenZhenRfstarTechnologyCo.,Ltd ProductName:BluetoothModule SampleModel:RSBRS02ABR ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2021.11.16 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02021.11.16Forthefirsttime,formulateJacksonEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4DUTsetupphotooffreespaceOTAtesting........................................................................6 3.TestResults......................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1S11parameters...........................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 (Thefollowingisblank)..............................................................................................................10 ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment Alltheequipmentusedinthereportisfixedin 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date 16probe microwave chamber 3*3*2.5 RFI-LAB-RF -A00 SUNYIELD2021.3.152023.3.14 Network Analyzer E5071C RFI-LAB-RF -A02 Agilent 2021.5.142022.5.13 Network Analyzer E5071C RFI-LAB-RF -C02 KEYSIGHT2021.5.142022.5.13 1.4Testenvironment Temperature 24.0°C Humidity 55%RH Pressure 100.04kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page5of10 2.SampleInformation 2.1Clientinformation Name ShenZhenRfstarTechnologyCo.,Ltd Address Room601,BlockC,SkyworthBuilding,High-techPark,NanShan District,ShenZhen,China Contacts Mr.Xie Tel 13580115040 E-mail [email protected] 2.2DescriptionofEUT(S) ProductName BluetoothModule SampleModel RSBRS02ABR Size / SerialNo. / TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 2400-2500MHz ReceivedDate 2021.11.15 TestDate 2021.11.15 Remark ThelengthoftheRFcableis65mm ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page6of10 2.3EUTappearance 2.4DUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain ± 1dB Radiationefficiency±10% ReportNo.:RFI-LAB-RF-202111-K01-1 QP030-E11 Page8of10 3.3 Testdata 3.3.1S11parameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 240024502500 VSWR 1.68881.32641.9040 Frequency/MHz 24002410242024302440245024602470248024902500 PeakGain/dBi -2.16-1.83-1.52-1.13-1.19-0.89-1.01-1.01-1.07-0.94-1.17 E…
Text truncated - open the document above for the full version.
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173702 Page: 1 of 62 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2306001737AT Applicant: WowWee Group Limited Address of Applicant: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST, Kowloon, Hong Kong Manufacturer: WowWee Group Limited Address of Manufacturer: Energy Plaza, Suite 301A - C 92 Granville Road, TST EAST, Kowloon, Hong Kong Factory: Shao Guan Early Light International Co., Ltd. Address of Factory: XURI Toy industry zone 6km, The western suburbs of Shaoguan City, Guangdong, China Equipment Under Test (EUT): EUT Name: Mintid Dog-E Model No.: 1691 Trade Mark: WowWee FCC ID: OKP1691 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-06-02 Date of Test: 2023-06-05 to 2023-06-08 Date of Issue: 2023-06-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173702 Page: 2 of 62 Revision Record Version Chapter Date Modifier Remark 01 2023-06-09 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600173702 Page: 3 of 62 2 Test …
Text truncated - open the document above for the full version.
No.1 Workshop, M-10, Middle Section Science & Tech · Shenzhen · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 600.00 µW |

Disney Marvel Spider Bot Shirt Crawler
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Disney Marvel Spider Bot Shirt Crawler
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Hydraquad (2535, 2XXX - 2XXX (XXX - from 000 - 999)), Hydraquad - 1/2 Pallet (2538), Hydraquad Endcap (24 Pcs) (2539)
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Hydraquad (2535, 2XXX - 2XXX (XXX - from 000 - 999)), Hydraquad - 1/2 Pallet (2538), Hydraquad Endcap (24 Pcs) (2539)
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
MiP 2.0 Arcade
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter