OKP2535AHydraquad (2535, 2XXX - 2XXX (XXX - from 000 - 999)), Hydraquad - 1/2 Pallet (2538), Hydraquad Endcap (24 Pcs) (2539)

Manufactured and distributed by © 2020 WowWee Group Limited. All Rights Reserved. Patent Pending. WowWee Group Limited. Energy Plaza, 301A-C 92 Granville Road T.S.T. East, Hong Kong Customer Service More infomation on: https://support.wowwee.com WowWee Canada Inc. 3700 Saint Patrick Street Suite 206, Montreal, QC H4E 1A2, Canada Age: 14+ ITEM NO: 2535 Package Contents: 1 x HydraQuad Hybrid Air to Water Stunt Drone with 4 Propellers 4 x Spare Propeller Blades 1 x 2.4 GHz Controller 1 x Rechargeable LiPo 3.7V 800mAh Battery (Included) 1 x USB Charging Cable 1 x User Manual POWER BUTTON FRONT (Yellow Propeller Cover) REAR (Black Propeller Cover) STUNT BUTTONTURBO BUTTON RIGHT STICK LEFT STICK CHANGES DIRECTIONCHANGES ALTITUDE & YAW FORWARD REVERSE TURN LEFT TURN RIGHT MODE SWITCH • Adult supervision is required at all times. Before each use, an adult should review the product and battery to determine that no damage or hazards exist. • Not recommended for children under 14 years of age. As with all electrical products, precaution should be observed during handling and use to reduce the risk of electrical shock. • Never touch or allow others to touch your HydraQuad while it is flying. • Do not touch spinning propellers or allow anything to intentionally make contact in any way with spinning propellers. • Prevent contact with spinning propellers by powering off prior to handling your HydraQuad. • Always turn your HydraQuad off when it is not in use. • Always fly your HydraQuad in large open areas. • Keep HydraQuad away from power lines, buildings, trees, public areas, and any other potentially hazardous areas. • Do not fly your HydraQuad into animals, people, or inanimate objects. Never fly your HydraQuad above or near people, sudden changes in wind or other conditions could lead to unexpected crashes. • Use caution and pay attention to your surroundings while operating your HydraQuad. • Obey relevant laws and respect the privacy and property rights of others. • Do not operate in rain, heavy wind, or any type of severe weather. • Your HydraQuad should never be modified or used for anything except its intended purpose. • To avoid possible hazards, do not crush, disassemble, or dispose of in fire. • Keep away from long hair. LITHIUM-POLYMER BATTERY WARNING • There is a risk of fire and personal injury if Li-Po battery is punctured, damaged or misused. • Never expose battery to extreme temperatures or moisture. • Do not subject battery to strong impacts. • Always keep battery away from flammable materials. • Only use manufacturer specified batter(ies), charger(s), USB Charging Cable and/or adapters, if applicable, specified by the manufacturer. • Battery is not serviceable. • Let battery cool to room temperature before charging. • While charging, never leave battery unattended. • Recycle or dispose of battery according to federal, state and local laws. • Charge battery in isolated area. • Do not expose to direct sunlight. • Carefully read the instruction guide, and use the Rechargeable Battery correctly. • In the unlikely event of leakage or explosion, use sand or a chemical fire extinguisher for the battery. • Batteries must be recycled or disposed of properly. 2535US01TOP_MIM WATER TAKEOFF & LANDING AQUATIC ROLLS & TRICKS DRIVE, HOVER & SKATE INDOORS 360º TURNS UP TO 130FT / 40 M FLIGHT RANGE FLIP STUNTS LEFT STICK USER MANUAL CONTROLLER & MODE OVERVIEW CONTENTS WARNINGS Frequency band(s): 2.4067 – 2.4707 GHz Maximum radio frequency power transmitted: Remote controller: -10.68dBm Hydraquad: -6.97dBm WowWee Group Limited declares that the product [HydraQuad] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.wowwee.com/EUdeclaration.html Manufactured and distributed by WowWee Group Limited. Product names, designations and logos are trademarks of WowWee Group Limited. Copyright 2020 WowWee Group Limited. All rights reserved. Patent Pending. We recommend that you retain our address for future reference. Product and colors may vary. Packaging printed in China. CAN ICES-003(B)/NMB-003(B) MADE IN CHINA CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that which the receiver is connected • Consult the dealer or experienced radio/TV technician for help This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This Device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may ca…

Text truncated - open the document above for the full version.

WowWee Group Limited Suite 301 A-C, Energy Plaza, 92 Granville Road, T.S.T. East, Kowloon, Hong Kong. Tel: (852)2739 5288 Fax: (852)2724 6931 Email: [email protected] Letter of Agency I, an officer of (WowWee Group Limited) do hereby authorize Intertek Testing Services (Terry Chan / Koo Wai IP / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 19 day July of 2021 By Dennis Tsoi Signature Printed Title Quality Assurance Manager

WowWee Group Limited Suite 301A-C, Energy Plaza, 92 Granville Road, T.S.T. East, Kowloon, Hong Kong. Tel: (852)2739 5288 Fax: (852)2724 6931 Email: [email protected] Re: Request for confidentiality Applicant: WowWee Group Limited FCC ID: [FCC ID: OKP2535A] To whom it may concern, Request is hereby submitted by WowWee Group Limited to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Rationale for request for confidentiality: WowWee Group Limited has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [For FCC certification; delete for TCB certification: The fee for confidentiality has been submitted along with the fee for certification.] If you have questions or need further information, please contact the undersigned. Sincerely, __________________________ Dennis Tsoi Quality Assurance Manager WowWee Group Limited Date: July 19, 2021

INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (External) INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (External) INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (External)

27 July 2021#2535 Cobradrone- Legal Lines• BODY legal lines• Output Elements in “FOR OUTPUT” Layer in file• Scale 1:1 NOTES:• Page 1 of 1 = Emboss [On Mold] = Print [Sliver - PMS 877C] KEY: © 2020 WOWWEE CHINA © 2020 WOWWEE CHINA © 2020 WOWWEE CHINA 2535A 2535A © 2020 WOWWEE CHINA © 2020 WOWWEE CHINA EMBOSS [for output] Sliver - PMS 877C PRINT BATTERY DOOR HANDLE FRONT BODY BOTTOM BODY BOTTOM BODY BOTTOM HANDLE BACK HANDLE BACK HANDLE BACK PT 380 PRINT HANDLE FRONT WHITE PRINT HANDLE FRONT HANDLE BACK NO BATTERY DOOR BACK NO BATTERY DOOR 1.5V “AAA” LR03 / UM41.5V “AAA” LR03 / UM4 1.5V “AAA” LR03 / UM4 1.5V “AAA” LR03 / UM41.5V “AAA” LR03 / UM4 1.5V “AAA” LR03 / UM4 T o O p e n TO REPLACE BATTERIES - UNSCREW SCREW ON BATTERY CASE (AS SHOWN IN ILLUSTRATION) AND REPLACE BATTERIES 3 x “AAA” SIZE LR03/UM4 d.c. 1.5 volt batteries T o O p e n TO REPLACE BATTERIES - UNSCREW SCREW ON BATTERY CASE (AS SHOWN IN ILLUSTRATION) AND REPLACE BATTERIES 3 x “AAA” SIZE LR03/UM4 d.c. 1.5 volt batteries CAN ICES-003(B)/NMB-003(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: OKP2535A DC output 3.7VLi-lon DC output 3.7VLi-lon IC: 7091A-2535A CAN ICES-003(B)/NMB-003(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: OKP2535A IC: 7091A-2535A 2535 FCC ID: OKP2535 IC: 7091A-2535 CAN ICES-003(B)/NMB-003(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2535 FCC ID: OKP2535 IC: 7091A-2535 CAN ICES-003(B)/NMB-003(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2535 FCC ID: OKP2535 IC: 7091A-2535 CAN ICES-003(B)/NMB-003(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: OKP2535A Equipment Photographs (Internal)

Analysis Report The Equipment Under Test (EUT), is a portable 2.4GHz Transceiver (Plane Unit) for a RC Plane. The sample supplied operated on 65 channels, normally at 2406.7 – 2470.7MHz. The channels are separated with 1MHz spacing. The EUT is powered by 1 x 3.7V Rechargeable battery. After switching on the EUT, the Plane will be moving to all directions based on the App controller. Antenna Type: Internal, Integral antenna Antenna Gain: 0dBi Nominal rated field strength is 85.7dBμV/m at 3m (Peak), 57.8dBμV/m at 3m (Average) Maximum allowed production tolerance: +/- 3dB According to the KDB 447498: Based on the maximum average field strength of production tolerance was 60.8dBμV/m at 3m in frequency 2.4707GHz. Thus, it below calculated field strength according to minimum SAR exclusion threshold level as follows: The worst case of SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.483.5) mW = 9.52 mW According to the KDB 412172 D01: EIRP = [(FS*D) ^2*1000 / 30] Calculated Field Strength for 9.52mW is 105dBuV/m @3m Since maximum average field strength plus production tolerance < = 105dBuV/m @3m and antenna gain is > = 0.0dBi, it is concluded that maximum Conducted Power and Field Strength are well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing.

2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 17 TEST REPORT Report No.: 21061563HKG-002 WowWee Group Limited Application For Certification (Original Grant) FCC ID: OKP2535A Transceiver Prepared and Checked by: Approved by: Signed On File Lee For Yiu, Florey Assistant Engineer Wong Kwok Yeung, Kenneth Assistant Supervisor Date: July 21, 2021 TEST REPORT WowWee Group Limited Intertek Report No: 21061563HKG-002 Page 2 of 17 GENERAL INFORMATION Grantee: WowWee Group Limited Grantee Address: Suite 301A-C, 3/F., Energy Plaza, 92 Granville Road, Tsim Sha Tsui East, Kowloon, Hong Kong. Contact Person: Dennis Tsoi Tel: (852) 2739 5288 Fax: (852) 2724 6931 e-mail: [email protected] Manufacturer: WowWee Group Limited Manufacturer Address: Suite 301A-C, 3/F., Energy Plaza, 92 Granville Road, Tsim Sha Tsui East, Kowloon, Hong Kong. Brand Name: WowWee Model: 2535 Additional Model: 2538, 2539, 2XXX - 2XXX (XXX - from 000 - 999) Type of EUT: Transceiver Description of EUT: Hydraquad (2535, 2XXX - 2XXX (XXX - from 000 - 999)), Hydraquad - ½ Pallet (2538), Hydraquad Endcap (24 Pcs) (2539) Serial Number: N/A FCC ID: OKP2535A Date of Sample Submitted: June 29, 2021 Date of Test: June 29, 2021 to July 13, 2021 Report No.: 21061563HKG-002 Report Date: July 21, 2021 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 Certification. TEST REPORT WowWee Group Limited Intertek Report No: 21061563HKG-002 Page 3 of 17 SUMMARY OF TEST RESULT Test Specification Reference Results Radiated Emission Radiated Emission on the Bandedge 15.249, 15.209 Pass Radiated Emission in Restricted Bands 15.205 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2020 Edition Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. TEST REPORT WowWee Group Limited Intertek Report No: 21061563HKG-002 Page 4 of 17 TABLE OF CONTENTS 1.0 GENERAL DESCRIPTION ................................................................................................ 5 1.1 Product Description ................................................................................................... 5 1.2 Related Submittal(s) Grants ....................................................................................... 5 1.3 Test Methodology ...................................................................................................... 5 1.4 Test Facility ................................................................................................................ 5 2.0 SYSTEM TEST CONFIGURATION ..................................................................................... 6 2.1 Justification ................................................................................................................ 6 2.2 EUT Exercising Software ............................................................................................. 6 2.3 Special Accessories .................................................................................................... 6 2.4 Measurement Uncertainty ......................................................................................... 6 2.5 Support Equipment List and Description .................................................................... 6 3.0 EMISSION RESULTS ....................................................................................................... 7 3.1 Field Strength Calculation .......................................................................................... 7 3.2 Radiated Emission Configuration Photograph ............................................................ 8 3.3 Radiated Emission Data ............................................................................................. 8 4.0 EQUIPMENT PHOTOGRAPHS ...................................................................................... 12 5.0 PRODUCT LABELLING .................................................................................................. 12 6.0 TECHNICAL SPECIFICATIONS ....................................................................................... 12 7.0 INSTRUCTION MANUAL ..…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE FCC ID: OKP2535A Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE FCC ID: OKP2535A Configuration Photographs Worst-Case Radiated Emissions (Back View)